Prior to this patch, if an element is queried and animated for 0 seconds
(just a style() call and nothing else) then the styles applied would not
be properly cleaned up due to their camelCased nature.
PR Close#23633
Fix a corner case where eager providers were getting constructed twice if the provider was requested before the initialization of the NgModule is complete.
PR Close#23559
g3 and the Angular repo have different versions of TypeScript, and
ts.updateIdentifier() has a different signature in the different versions.
There is no way to write a call to the function that will compile in both
versions simultaneously.
Instead, use ts.getMutableClone() as that has the same effect of cloning
the identifier.
PR Close#23550
This commit adds a new compiler pipeline that isn't dependent on global
analysis, referred to as 'ngtsc'. This new compiler is accessed by
running ngc with "enableIvy" set to "ngtsc". It reuses the same initialization
logic but creates a new implementation of Program which does not perform the
global-level analysis that AngularCompilerProgram does. It will be the
foundation for the production Ivy compiler.
PR Close#23455
`ng.performCompilation` can return an `undefined` program, which is not handled by ngc-wrapped.
Avoid crashing by checking for the error return and returning the diagnostics.
PR Close#23468
The bug fixed here steams from the fact that we are traversing too far up
in the views tree hierarchy in the destroyViewTree function.
The logic in destroyViewTree is off if we start removal at an embedded view
without any child views. For such a case we should just clean up (cleanUpView)
this one view without paying attention to next / parent views.
PR Close#23482
When asking the route reuse strategy to retrieve a detached route handle, store the
return value in a local variable for further processing instead of asking again later.
resolves#22474
PR Close#22475
A long time ago Angular used to support both those attribute notations:
- `*attr='binding'`
- `template=`attr: binding`
Because the last notation has been dropped we can refactor the binding parsing.
Source maps will benefit from that as no `attr:` prefix is added artificialy any
more.
PR Close#23460
In certain cases seen in production, simplify() can returned
undefined when simplifying decorator metadata. This has proven tricky
to reproduce in an isolated test, but the fix is simple and low-risk:
don't attempt to spread an undefined set of annotations in the first
place.
PR Close#23349
This patch is in response to #23401 where a non-const enum was being
compiled as an empty object when used in an animation player when
`ng build --prod` was being processed. This patch is a immediate fix
for the issue and #23400 tracks it.
Closes#23401
PR Close#23402
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an opaque token.
For this reson why declare the return value of `defineInjectable` as `never`.
PR Close#23383
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an `OpaqueToken`.
By prefixing the type with `ɵ` we are communicating the the outside world that
the value is not public API and is subject to change without backward compatibility.
PR Close#23371
- Remove default injection value from `inject` / `directiveInject` since
it is not possible to set using annotations.
- Module `Injector` is stored on `LView` instead of `LInjector` data
structure because it can change only at `LView` level. (More efficient)
- Add `ngInjectableDef` to `IterableDiffers` so that existing tests can
pass as well as enable `IterableDiffers` to be injectable without
`Injector`
PR Close#23345
This change changes:
- compiler uses `directiveInject` instead of `inject` for `Directive`s
- unifies the flags in `di` as well as `render3`
- changes the signature of `directiveInject` to match `inject` In prep for #23330
- compiler now generates flags for injection.
Compiler portion of #23342
Prep for #23330
PR Close#23345
In [glob patterns][1], the `*` wildcard is supposed to match 0 or more
characters.
For reference:
- This is also how `*` works in other implementations, such as
`.gitignore` files or Firebase hosting config.
- Some popular JS implementations (e.g. [minimatch][2], [micromatch][3])
work differently, matching 1 or more character (but not 0).
This commit "fixes" the minimal glob support in
`@angular/service-worker` to allow `*` to also match 0 characters.
[1]: https://en.wikipedia.org/wiki/Glob_%28programming%29
[2]: https://www.npmjs.com/package/minimatch
[3]: https://www.npmjs.com/package/micromatch
PR Close#23339
The ServiceWorker will redirect navigation requests that don't match any
`asset` or `data` group to the specified index file. The rules for a
request to be classified as a navigation request are as follows:
1. Its `mode` must be `navigation`.
2. It must accept a `text/html` response.
3. Its URL must match certain criteria (see below).
By default, a navigation request can have any URL except for:
1. URLs containing `__`.
2. URLs to files (i.e. containing a file extension in the last path
segment).
While these rules are fine in many cases, sometimes it is desirable to
configure different rules for the URLs of navigation requests (e.g.
ignore specific URLs and pass them through to the server).
This commit adds support for specifying an optional `navigationUrls`
list in `ngsw-config.json`, which contains URLs or simple globs
(currently only recognizing `!`, `*` and `**`).
Only requests whose URLs match any of the positive URLs/patterns and
none of the negative ones (i.e. URLs/patterns starting with `!`) will be
considered navigation requests (and handled accordingly by the SW).
(This is an alternative implementation to #23025.)
Fixes#20404
PR Close#23339
These files are in the UMD format for greater portablity, and as such
can't be marked as side-effect-free by webpack/build-optimizer/uglify.
PR Close#23366
Detect server environment by checking `typeof window` and schedule render immediately instead of waiting for RAF.
This does not make Angular Elements work on platform-server. This is just the first step.
PR Close#23324
All our package labels are `npm_package` so the bazel build reports a bunch of identical actions running, like
```
Angular Packaging: rolling up npm_package; 31s darwin-sandbox
Angular Packaging: rolling up npm_package; 30s darwin-sandbox
Angular Packaging: rolling up npm_package; 29s darwin-sandbox
Angular Packaging: rolling up npm_package; 27s darwin-sandbox
Angular Packaging: rolling up npm_package; 26s darwin-sandbox
Angular Packaging: rolling up npm_package; 23s darwin-sandbox
Angular Packaging: rolling up npm_package; 19s darwin-sandbox
Angular Packaging: rolling up npm_package; 11s darwin-sandbox
```
PR Close#23318
The 'stringify' function prints an object as [Object object] which
is not very helpful in many cases, especially in a diagnostics
message. This commit changes the behavior to pretty print an object.
PR Close#22689
When compiling templates the compiler would often bind to
closest context rather than the component context.
The only time one should be binding to the cont component is
in explicit cases where the inner template declares local variable.
PR Close#23168
Given
```
<div *ngFor=”…” (click)=“doSomething()”>
```
Before `doSomething` would execute on the inner template context, which
is incorrect. The correct behavior is to execute on the top level context
of the component.
PR Close#23168
rxjs 6.0.0 breaks strictMetadataEmit as they now publish a .d.ts file with a
structure like:
declare export class Subscription {
static EMPTY: Subscription;
}
This generates metadata which contains an error, and fails the strictMetadataEmit
validation. There is nothing a library author can do in this situation except to
set strictMetadataEmit to false.
The spirit of strictMetadataEmit is to validate that the author's library doesn't
do anything that will break downstream users. This failure is a corner case which
causes more harm than good, so this commit disables validation for metadata
collected from .d.ts files.
Fixes#22210
PR Close#23275
Lowering expressions in flat module metadata is desirable, but it won't
work without some rearchitecting. Currently the flat module index source
is added to the Program and therefore must be determined before the rest
of the transforms run. Since the lowering transform changes the set of
exports needed in the index, this creates a catch-22 in the index
generation.
This commit causes the flat module index metadata to be generated using
only those transforms which are "safe" (don't modify the index).
PR Close#23226
As we no longer create native (RNode) comment nodes for containers,
we need to execute logic for finding a next sibiling node with RNode
when inserting a view.
The mentioned logic need to be updated for the case of dynamically
created containers (LContainerNode). Indeed, we need to be able to
descend into dynamically inserted views while looking for a RNode.
To achieve this we need to have a pointer from a host LNode to a
dynamically created LContainerNode).
PR Close#23193
In pipes the content of these tags is now generated automatically.
In directives these tags have been converted to `@usageNotes` tags,
but in the future me might find a way to generate that usage too.
PR Close#23062
- properly display initial checked state
- properly remove a todo
Please note that the 'archive' option still doesn't
work correctly as listening to component outputs doesn't
seem to work (onArchive() is never called).
PR Close#23161
Currently, the flat module index metadata is produced directly from
the source metadata. The compiler, however, applies transformations
on the Typescript sources during transpilation, and also equivalent
transformations on the metadata itself. This transformed metadata
doesn't end up in the flat module index.
This changes the compiler to generate the flat module index metadata
from its transformed version instead of directly from source.
PR Close#23129
Computing the value of loadChildren does not work externally, as the CLI
needs to be able to detect the paths referenced to properly set up
codesplitting. However, internally, different approaches to codesplitting
require hashed module IDs, and the computation of those hashes involves
something like:
{path: '...', loadChildren: hashFn('module')}
ngc should lower loadChildren into an exported constant in that case.
This will never break externally, because loadChildren is always a
string externally, and a string won't get lowered.
PR Close#23088
Currently the context for inject() is only set when the token is seen
for the first time. This has two issues:
* It should always be set when injecting from that injector, because
a constructor may wish to call inject() directly.
* If an NgModuleFactory is .create()'d twice, and an ngInjectableDef
token is requested from each of them, the second time will fail.
This is because the first injection adds the provider definition
and calls the factory, and the provider definitions are shared.
The second injector will see the provider definition and call the
factory to create an instance, but without setting the correct
context for inject().
Fixes angular/material2#10586.
PR Close#23148
Remove `containerRefreshStart` and `containerRefreshEnd` instruction
from the output.
Generate directives as a list in `componentDef` rather than inline into
instructions. This is consistent in making selector resolution runtime
so that translation of templates can follow locality.
PR Close#22921
This commit modifies the compilation to emit metadata.json files when
compiled under Blaze. The default behavior of ngc is to emit metadata
only when the --flatModuleOutFile flag is specified, but this mode
is not used in Blaze.
Emitting metadata for individual Angular components is needed for
Angular Language Service to work with projects compiled with Blaze.
PR Close#23049
Under some circumstances (possibly related to opening Chrome DevTools),
requests are made with `cache: 'only-if-cached'` and `mode: 'no-cors'`.
These request will eventually fail, because `only-if-cached` is only
allowed to be used with `mode: 'same-origin'`.
This is likely a bug in Chrome DevTools.
This commit avoids errors related to such requests by not handling them.
Fixes#22362
PR Close#22883
Previously, when trying to fetch `ngsw.json` (e.g. during
`checkForUpdate()`) while either the client or the server were offline,
the ServiceWorker would enter a degrade mode, where only existing
clients would be served. This essentially meant that the ServiceWorker
didn't work offline.
This commit fixes it by differentiating offline errors and not entering
degraded mode. The ServiceWorker will remain in the current mode until
connectivity to the server is restored.
Fixes#21636
PR Close#22883
In Ivy mode we rewrite references to Injector to INJECTOR in ngInjectableDef, to fix tree-shaking.
This changes the rewrite to happen always, even in non-Ivy mode, and makes Angular understand
INJECTOR across the board at runtime.
PR Close#23008
This allows a bundle index to be re-exported by a higher-level module without fear of collisions.
Under bazel, we always set the prefix to be underscore-joined workspace, package, label
PR Close#23007
Previously, @Injectable() would generate an ngInjectableDef on the type it was
decorating, even if that type already had a compiled ngInjectableDef, overwriting
the compiled version.
PR Close#22943
This patch ensures that if a numeric state name value in an animation
is detected then it will not throw an error. Normally this wouldn't
occur, but some JS optimizers may convert a quoted numeric value
(like "1" to 1) in some cases to save space. This patch makes sure
that Angular doesn't throw an error when this occurs.
PR Close#22923
ngc knows to filter out d.ts inputs, but the logic accidentally
depended on whether it had a previous Program lying around.
Fixing that logic puts ngc on the fast code path, but in that code
path it must be able to merge tsickle EmitResults, so we need to
plumb the tsickle.mergeEmitResults function through all the intervening
APIs. The bulk of this change is that plumbing.
PR Close#22899
'remove' method not removing url from state.map
'accessed' method not removing 'previous' reference from existing node when it becomes the head
Fixes#22218Fixes#22768
PR Close#22769
Newer version of TS is stricter about types and flags counter-variant
types in some situations. This change inlines the DirectiveDefArgs
into the arguments which:
1) removes the inheritance which caused the issue and
2) Makes it more friendly to IDEs since they will not report comments.
Closes#22877Closes#22843
PR Close#22897
This lets projects like Material change ng_package "bundle index" files to non-conflicting paths
Currently packages like @angular/core ship with the generated metadata
in a path like 'core.js' which overwrites one of the inputs.
Angular material puts the generated file in a path like 'index.js'
Either way these files generated by ng_module rules have the potential
to collide with inputs given by the user, which results in an error.
Instead, give users the freedom to choose a different non-conflicting name.
Also this refactors the ng_package rule, removing the redundant
secondary_entry_points attribute.
Instead, we assume that any ng_module in the deps with a module_name
attribute is a secondary entry point.
PR Close#22814
Changes would not propagate to a value in downgraded component in case you had two-way binding and listening to a value-change, e.g. [(value)]="value" (value-change)="fetch()"
Closes#22734
PR Close#22772
This adds compilation of @NgModule providers and imports into
ngInjectorDef statements in generated code. All @NgModule annotations
will be compiled and the @NgModule decorators removed from the
resultant js output.
All @Injectables will also be compiled in Ivy mode, and the decorator
removed.
PR Close#22458
Moves the status reporting from the issue #21706 to a file that
can be updated as changes are being made. This addresses one of the
comments on the issue and allows better tracking of updates to this
status and changes made.
PR Close#22751
This flag is picked up by webpack v4 and used for more agressive optimizations.
Our code is already side-effect free, because that's what we needed for build-optimizer to work.
PR Close#22785
BREAKING CHANGE:
The `<template>` tag was deprecated in Angular v4 to avoid collisions (i.e. when
using Web Components).
This commit removes support for `<template>`. `<ng-template>` should be used
instead.
BEFORE:
<!-- html template -->
<template>some template content</template>
# tsconfig.json
{
# ...
"angularCompilerOptions": {
# ...
# This option is no more supported and will have no effect
"enableLegacyTemplate": [true|false]
}
}
AFTER:
<!-- html template -->
<ng-template>some template content</ng-template>
PR Close#22783
Angular Package Format v6 stops bundling files in the esm5 and esm2015
directories, now that Webpack 4 can tree-shake per-file.
Adds some missing files like package.json to make packages closer to
what we publish today.
Refactor ng_package to be a type of npm_package and re-use the packaging
action from that rule.
PR Close#22782
Works around an issue with TypeScript 2.6 and 2.7 that causes
the tranformer emit to emit incorrect escapes for css string
literals.
Fixes: #22774
PR Close#22776
Adds a stub for `elementStyle` and `elementClass` instruction
with a canonical spec for the compiler. The spec shows the the
compiler should be using `elementStyle` and `elementClass` instruction
in place of `[class]` and `[style]` bindings respectively.
PR Close#22719
Rename:
- `elementClass` (short: `k`) => `elementClassNamed` (short: `kn`)
- `elementStyle` (short: `s`) => `elementStyleNamed` (short: `sn`)
Currently `[class.name]` is `elementClass(0, ‘name’, value)`. We would
like to introduce new binding `[class]` which needs a new instruction
ideally `elementClass(0, value)`. Doing the rename creates space
to create such an instruction in subsequent change.
PR Close#22719
This patch removes the deprecated support for animation
symbol imports from @angular/core.
BREAKING CHANGE: it is no longer possible to import
animation-related functions from @angular/core. All
animation symbols must now be imported from @angular/animations.
PR Close#22692
This commit fixes a bug that would result in views insert / remove
even if a view needed only refresh operation.
The crux of the bug was that we were looking for a view to update
only in the LContainer.nextIndex position. This is incorrect as a
view with a given block id could be present later in the views
array (this happens if we about to remove a view in the middle of
the views array).
The code in this fix searches for a view to update in the views array and
can remove views in the middle of the views collection. Previously we
would remove views at the end of the collection only.
PR Close#22656
Allow passing an optional timeout to Testability's whenStable(). If
specified, if Angular is not stable before the timeout is hit, the
done callback will be invoked with a list of pending macrotasks.
Also, allows an optional update callback, which will be invoked whenever
the set of pending macrotasks changes. If this callback returns true,
the timeout will be cancelled and the done callback will not be invoked.
If the optional parameters are not passed, whenStable() will work
as it did before, whether or not the task tracking zone spec is
available.
This change also migrates the Testability unit tests off the deprecated
AsyncTestCompleter.
PR Close#16863
The new rollup rule disables inlining symbols in debug mode. This makes
it look as if there would be more symbols but in reality these are the
symbols which are no longer being inlined.
PR Close#22747
Rename @Injectable({scope -> providedIn}).
Instead of {providedIn: APP_ROOT_SCOPE}, accept {providedIn: 'root'}.
Also, {providedIn: null} implies the injectable should not be added
to any scope.
PR Close#22655
Closure has a transformation which turns:
Service.ngInjectableDef = ...;
into:
Service$ngInjectableDef = ...;
This transformation obviously breaks Ivy in a major way. The solution is
to annotate the fields as @nocollapse. However, Typescript appears to ignore
synthetic comments added to a node during a transformation, so the "right"
way to add these comments doesn't work.
As an interim measure, a post-processing step just before the compiled JS is
written to disk appends the correct comments with a regular expression.
PR Close#22691
Previously the flag would only disable the check in the case we tried to use newer tsc version.
In g3 we sometimes take a while to update tsc, but as a prerequisite of that Angular needs to be
updated first. This change enables us to update Angular and use it in g3 while g3 is being update
to the required tsc. Of course extra care is required when this check is disabled, but since we
control everything in g3, it's on us to get this right.
I don't see any preexisting tests for this, and I'm not sure how to write them right now.
I filed https://github.com/angular/angular/issues/22699
PR Close#22669
This is not expected to be a breaking change for anyone who's on Node LTS (currently v8)
and aligns @angular/compilar-cli with @angular/cli's runtime requirements.
PR Close#22669
When the compiler generates a reference to an exported variable in the
same file, it inserts a synthetic ts.Identifier node. In CommonJS
output, this synthetic node would not be properly rewritten with an
`exports.` prefix.
This change sets the TS original node property on the synthetic node
we generate, which ensures TS knows to rewrite it in CommonJS output.
PR Close#22564
When angularCompilerOptions { enableResourceInlining: true }, we replace all templateUrl and styleUrls properties in @Component with template/styles
PR Close#22615
We now create npm packages to cover all the public api assertions in tools/public_api_guard.
We no longer depend on ts-api-guardian from npm - it is now stale since the repository was archived.
There is no longer a gulp task to enforce or accept the public API, this is in CircleCI as part of running all bazel test targets.
PR Close#22639
Produces back-patch as described in the #22235 and referenced in #22480.
This just contains the compiler implementations and the corresponding unit
tests. Connecting the dots as described in #22480 will be in a follow on
change.
PR Close#22506
BREAKING CHANGE: after this change, npm and yarn will issue incompatible peerDependencies warning
We don't expect this to actually break an application, but the application/library package.json
will need to be updated to provide tslib 1.9.0 or higher.
PR Close#22667
Support for using the `ngModel` input property and `ngModelChange`
event with reactive form directives has been deprecated in
Angular v6 and will be removed in Angular v7.
Now deprecated:
```html
<input [formControl]="control" [(ngModel)]="value">
```
```ts
this.value = 'some value';
```
This has been deprecated for a few reasons. First, developers have
found this pattern confusing. It seems like the actual `ngModel`
directive is being used, but in fact it's an input/output property
named `ngModel` on the reactive form directive that simply approximates
(some of) its behavior. Specifically, it allows getting/setting the
value and intercepting value events. However, some of `ngModel`'s other
features - like delaying updates with`ngModelOptions` or exporting the
directive - simply don't work, which has understandably caused some
confusion.
In addition, this pattern mixes template-driven and reactive forms
strategies, which we generally don't recommend because it doesn't take
advantage of the full benefits of either strategy. Setting the value in
the template violates the template-agnostic principles behind reactive
forms, whereas adding a FormControl/FormGroup layer in the class removes
the convenience of defining forms in the template.
To update your code before v7, you'll want to decide whether to stick
with reactive form directives (and get/set values using reactive forms
patterns) or switch over to template-driven directives.
After (choice 1 - use reactive forms):
```html
<input [formControl]="control">
```
```ts
this.control.setValue('some value');
```
After (choice 2 - use template-driven forms):
```html
<input [(ngModel)]="value">
```
```ts
this.value = 'some value';
```
You can also choose to silence this warning by providing a config for
`ReactiveFormsModule` at import time:
```ts
imports: [
ReactiveFormsModule.withConfig({warnOnNgModelWithFormControl: 'never'});
]
```
Alternatively, you can choose to surface a separate warning for each
instance of this pattern with a config value of `"always"`. This may
help to track down where in the code the pattern is being used as the
code is being updated.
Note: `warnOnNgModelWithFormControl` is set up as deprecated so that it
can be removed in v7 when it is no longer needed. This will not display
properly in API docs yet because dgeni doesn't yet support deprecating
properties in object literals, but we have an open issue to resolve the
discrepancy here: https://github.com/angular/angular/issues/22640.
PR Close#22633
By providing a top level sanitization methods (rather than service) the
compiler can generate calls into the methods only when needed. This makes
the methods tree shakable.
PR Close#22540
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on RFC 3986 and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* URI fragments will now serialize the same as query strings
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
Fixes: #10280
PR Close#22337
Previously the injectable compiler assumed all tree-shakeable injectables
would have dependencies that were injectables or InjectionTokens. However
old code still uses string tokens (e.g. NgUpgrade and '$injector'). Using
such tokens would cause the injectable compiler to crash.
Now, the injectable compiler can properly generate a dependency on such a
string token.
PR Close#22376
"ng update" supports having multiple packages as part of a group which should be updated together, meaning that e.g. calling "ng update @angular/core" would be equivalent to updating all packages of the group (that are part of the package.json already).
In order to support the grouping feature, the package.json of the version the user is updating to needs to include an "ng-update" key that points to this metadata.
The entire specification for the update workflow can be found here: 2e8b12a4ef/docs/specifications/update.md
PR Close#22482
inject() supports the ngInjectableDef-based configuration of the injector
(otherwise known as tree-shakeable services). It was missing from the
exported API of @angular/core, this PR adds it.
The test added here is correct in theory, but may pass accidentally due
to the decorator side-effect replacing the inject() call at runtime. An
upcoming compiler PR will strip reified decorators from the output
entirely.
Fixes#22388
PR Close#22389
Previously, when a downgraded component was destroyed in a way that did
not trigger the `$destroy` event on the element (e.g. when a parent
element was removed from the DOM by Angular, not AngularJS), the
`ComponentRef` was not destroyed and unregistered.
This commit fixes it by listening for the `$destroy` event on both the
element and the scope.
Fixes#22392
PR Close#22400
* Add correct mapping from camel case to kebab case for CSS style
names
* Remove internal CSS methods in favor of native Domino APIs
Fixes#19235
PR Close#22263
The function provided by `ngUpgrade` as `parentBoundTranscludeFn` when
upgrading a component with transclusion, will break in AngularJS v1.5.8+
if no transclusion content is provided. The reason is that AngularJS
will try to destroy the transclusion scope (which would not be needed
any more). But since the transcluded content comes from Angular, not
AngularJS, there is no transclusion scope to destroy.
This commit fixes it by providing a dummy scope object with a no-op
`$destroy()` method.
Fixes#22175
PR Close#22167
Previously, having a `=` binding on an upgraded components would result
in setting the corresponding property to an EventEmitter function. This
should only happen for `&` bindings.
This commit rstrores the correct behavior.
Note:
The issue was only present in the dynamic version of `ngUpgrade`. The
static version worked as expected.
The error did not show up in tests, because in AngularJS v1.5.x a
function would be serialized to an empty string in interpolations, thus
making them indistinguishable from uninitialized properties (in the
view). The serialization behavior changed in AngularJS v1.6.x, making
the errors visible.
PR Close#22167
`packages/upgrade/static/src` is anymlink to `packages/upgrade/src`.
Still, using the correct paths (e.g. using
`@angular/upgrade/static/src/...` for `@angula/upgrade/static` specs
ensures that the module loader (e.g. SystemJS) can map the imports to
the same instances.
PR Close#22167
The utility functions `formatNumber`, `formatPercent`, `formatCurrency`, and `formatDate` used by the number, percent, currency and date pipes are now available for developers who want to use them outside of templates.
Fixes#20536
PR Close#22423
Fixes: #10280
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on [RFC 3986](http://tools.ietf.org/html/rfc3986) and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* Query strings will now serialize with decoded slash (`/`) and question mark (`?`)
* URI fragments will now serialize the same as query strings, but hash sign (`#`) will also appear decoded
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
PR Close#22337
This produces a directory following the Angular Package layout spec.
Includes integration test coverage by making a minimal ng_package in integration/bazel.
Unit tests verify the content of the @angular/core and @angular/common packages.
This doesn't totally match our current output, but is good enough to unblock some
early adopters.
It re-uses logic from the rollup_bundle rule in rules_nodejs. It should also
eventually have the .pack and .publish secondary targets like npm_package rule.
PR Close#22221
This patch removes the need to include the Web Animations API Polyfill
(web-animations-js) as a dependency. Angular will now fallback to using
CSS Keyframes in the event that `element.animate` is no longer supported
by the browser.
In the event that an application does use `AnimationBuilder` then the
web-animations-js polyfill is required to enable programmatic,
position-based access to an animation.
Closes#17496
PR Close#22143
closes#17958
BREAKING CHANGE:
- `AbstractControl#statusChanges` now emits an event of `'PENDING'` when you call `AbstractControl#markAsPending`
- Previously it did not emit an event when you called `markAsPending`
- To migrate you would need to ensure that if you are filtering or checking events from `statusChanges` that you account for the new event when calling `markAsPending`
PR Close#20212
This patch ensures that if the NoopAnimationsModule is used then it will
correctly report the associated `totalTime` property within the emitted
AnimationEvent instance when an animation event trigger is fired.
BREAKING CHANGE: When animation is trigged within a disabled zone, the
associated event (which an instance of AnimationEvent) will no longer
report the totalTime as 0 (it will emit the actual time of the
animation). To detect if an animation event is reporting a disabled
animation then the `event.disabled` property can be used instead.
PR Close#22225
InjectionToken can be created with an ngInjectableDef, and previously
this allowed the full expressiveness of @Injectable. However, this
requires a runtime reflection system in order to generate factories
from expressed provider declarations.
Instead, this change requires scoped InjectionTokens to provide the
factory directly (likely using inject() for the arguments), bypassing
the need for a reflection system.
Fixes#22205
PR Close#22207
@Injectable() supports a scope parameter which specifies the target module.
However, it's still difficult to specify that a particular service belongs
in the root injector. A developer attempting to ensure that must either
also provide a module intended for placement in the root injector or target
a module known to already be in the root injector (e.g. BrowserModule).
Both of these strategies are cumbersome and brittle.
Instead, this commit adds a token APP_ROOT_SCOPE which provides a
straightforward way of targeting the root injector directly, without
requiring special knowledge of modules within it.
PR Close#22185
The AsyncPipe type signature was changed to allow
deferred creation of promises and observalbes that
is supported by the implementation by allowing
`Promise<T>|null|undefined` and by allowing
`Observable<T>|null|undefined`.
PR Close#22169
This commit bundles 3 important changes, with the goal of enabling tree-shaking
of services which are never injected. Ordinarily, this tree-shaking is prevented
by the existence of a hard dependency on the service by the module in which it
is declared.
Firstly, @Injectable() is modified to accept a 'scope' parameter, which points
to an @NgModule(). This reverses the dependency edge, permitting the module to
not depend on the service which it "provides".
Secondly, the runtime is modified to understand the new relationship created
above. When a module receives a request to inject a token, and cannot find that
token in its list of providers, it will then look at the token for a special
ngInjectableDef field which indicates which module the token is scoped to. If
that module happens to be in the injector, it will behave as if the token
itself was in the injector to begin with.
Thirdly, the compiler is modified to read the @Injectable() metadata and to
generate the special ngInjectableDef field as part of TS compilation, using the
PartialModules system.
Additionally, this commit adds several unit and integration tests of various
flavors to test this change.
PR Close#22005
All of the providers in a module get compiled into a module definition in the
factory file. Some of these providers are for the actual module types, as those
are available for injection in Angular. For tree-shakeable tokens, the runtime
needs to be able to distinguish which modules are present in an injector.
This change adds a NodeFlag which tags those module providers for later
identification.
PR Close#22005
Igor Minar
Pete Bacon Darwin
Matias Niemelä
Kara Erickson
Misko Hevery
Victor Berchet
Vikram Subramanian
Marc Laval
Alex Rickabaugh
Alex Eagle
Paul Freedman
Martin Probst
Pawel Kozlowski
Olivier Combe
Steven Liekens
HiveSolution
George Kalpakas
Rafael
Rob Wormald
Greg Magolan
Camilo Giraldo
Joey Perrott
Nathan Friend
Andrew Seguin
Alex Eagle
Keen Yee Liau
paulmojicatech
Jeremy Elbourn
JiaLi.Passion
Alan Agius
Aslan Vatsaev
Dirk Luijk
Jason Bedard
Judy Bogart
Shannon Dunn
Oussama Ben Brahim
Chuck Jazdzewski
Veres Lajos
sergeome
Rado Kirov
adasilva
Jason Aden
Domas Trijonis
Adam Plumer
Michael Giambalvo
WilliamKoza
Suguru Inatomi
Hans Larsen
Trotyl
Fabian Wiles
Philip Pham
Ricardo M
Frederik Prijck
Adrien Boullé
guillaumebarranco
Kara