The current method of handling duplicate navigations caused by 'hashchange' and 'popstate' events for the same url change does not correctly handle cancelled navigations. Because `scheduleNavigation` is called in a `setTimeout` in the location change subscription, the duplicate navigations are not flushed at the same time. This means that if the initial navigation hits a guard that schedules a new navigation, the navigation for the duplicate event will not compare to the correct transition (because we inserted another navigation between the duplicates). See https://github.com/angular/angular/issues/16710#issuecomment-646919529Fixes#16710
PR Close#37674
The `fs.relative()` method assumed that the file-system is a single tree,
which is not the case in Windows, where you can have multiple drives,
e.g. `C:`, `D:` etc.
This commit changes `fs.relative()` so that it no longer forces the result
to be a `PathSegment` and then flows that refactoring through the rest of
the compiler-cli (and ngcc). The main difference is that now, in some cases,
we needed to check whether the result is "rooted", i.e an `AbsoluteFsPath`,
rather than a `PathSegment`, before using it.
Fixes#36777
PR Close#37959
In an effort to make angular documentation easier for users to read,
we are moving the router tutorial currently in router.md to a new file.
To support this change, we have done the following:
* Update files to fix any broken links caused by moving the file
* Updated the new file to follow tutorial guidelines
* Add the new file to the table of contents under, Tutorials.
PR Close#37979
Builds on top of #34655 to support more cases that could be using a pipe inside host bindings (e.g. ternary expressions or function calls).
Fixes#37610.
PR Close#37883
The `ng_module` rule supports the generation of flat module bundles. In
View Engine, information about this flat module bundle is exposed
as a Bazel provider. This is helpful as other rules like `ng_package`
could rely on this information to determine entry-points for the APF.
With Ivy this currently does not work because the flat module
information is not exposed in the provider. The reason for this is
unclear. We should also provide this information in Ivy so that rules
like `ng_package` can also determine the correct entry-points when a
package is built specifically with `--config=ivy`.
PR Close#36971
Some ServiceWorker operations and methods require normalized URLs.
Previously, the generic `string` type was used.
This commit introduces a new `NormalizedUrl` type, a special kind of
`string`, to make this requirement explicit and use the type system to
enforce it.
PR Close#37922
In some cases, it is useful to use a relative base href in the app (e.g.
when an app has to be accessible on different URLs, such as on an
intranet and the internet - see #25055 for a related discussion).
Previously, the Angular ServiceWorker was not able to handle relative
base hrefs (for example when building the with `--base-href=./`).
This commit fixes this by normalizing all URLs from the ServiceWorker
configuration wrt the ServiceWorker's scope.
Fixes#25055
PR Close#37922
This is in preparation of enabling the ServiceWorker to handle
relative paths in `ngsw.json` (as discussed in #25055), which will
require normalizing URLs in other parts of the ServiceWorker.
PR Close#37922
The Angular ServiceWorker can serve requests to a special virtual path,
`ngsw/state`, showing [information about its internal state][1], which
can be useful for debugging.
Previously, this would only work if the ServiceWorker's [scope][2] was
the root directory (`/`). Otherwise, (e.g. when building the app with
`--baseHref=/some/path/`), the ServiceWorker would fail to detect a
request to `/some/path/ngsw/state` as matching `ngsw/state` and would
not serve it with the debugging information.
This commit fixes it by ensuring that the ServiceWorker's scope is taken
into account when detecting a request to `ngsw/state`.
[1]: https://angular.io/guide/service-worker-devops#locating-and-analyzing-debugging-information
[2]: https://developer.mozilla.org/en-US/docs/Web/API/ServiceWorkerRegistration/scopeFixes#30505
PR Close#37922
One of the ivy acceptance tests currently fails in IE10. This
is because we recently added a new test that asserts that injecting
`ViewRef` results in a `NullInjectorError`.
Due to limitations in TypeScript and in polyfills for `setPrototypeOf`,
the error cannot be thrown as `ViewRef` is always considered injectable.
In reality, `ViewRef` should not be injectable, as explicitly noted
in c00f4ab2ae.
There seems no way to simulate the proper prototype chain in such
browsers that do not natively support `__proto__`, so TypeScript
and `core-js` polyfills simply break the prototype chain and
assign inherited properties directly on `ViewRef`. i.e. so that
`ViewRef.__NG_ELEMENT_ID__` exists and DI picks it up.
There is a way for TypeScript to theoretically generate proper
prototype chain in ES5 output, but they intend to only bother
about the proper prototype chain in ES6 where `setPrototypeOf`
etc. are offically standarized. See the response:
https://github.com/microsoft/TypeScript/issues/1601#issuecomment-94892833.
PR Close#37892
Before this refactoring we had the WrappedValue class in
2 separate places:
- packages/core/src/change_detection/change_detection_util.ts
- packages/core/src/util/WrappedValue.ts
This commit removes the duplicate, leaving the class that has
the deprecation notice.
PR Close#37940
The ngtsc testing packages for file_system and logging were missing from the bazel deps rules, which means that they were not included in the releases
PR Close#37977
When loading a translation file we ask each `TranslationParser`
whether it can parse the file. Occasionally, this check can find
errors in the file that would be useful to the developer. For example
if the file has invalid XML.
This commit deprecates the previous `canParse()` method and replaces it
with a new `analyze()` method. This returns an object that includes a
boolean `canParse` and then either a `hint` if it can parse the file,
or a `diagnostics` object filled with any messages that can be used to
diagnose problems with the format of the file.
Closes #37901
PR Close#37909
Currently when the `plural` or `select` keywords in an ICU contain trailing spaces (e.g. `{count, select , ...}`), these spaces are also included into the key names in ICU vars (e.g. "VAR_SELECT "). These trailing spaces are not desirable, since they will later be converted into `_` symbols while normalizing placeholder names, thus causing mismatches at runtime (i.e. placeholder will not be replaced with the correct value). This commit updates the code to trim these spaces while generating an object with placeholders, to make sure the runtime logic can replace these placeholders with the right values.
PR Close#37866
CanLoad guards are processed in asynchronous manner with the following rules:
* If all guards return `true`, operator returns `true`;
* `false` and `UrlTree` values wait for higher priority guards to resolve;
* Highest priority `false` or `UrlTree` value will be returned.
`prioritizedGuardValue` uses `combineLatest` which in order subscribes to each Observable immediately (not waiting when previous one completes that `concatAll` do). So it makes some advantages in order to run them concurrently. Respectively, a time to resolve all guards will be reduced.
PR Close#37523
This PR changes the logic for determining when to skip route processing from
using the URL of the last attempted navigation to the actual resulting URL after
that transition.
Because guards may prevent navigation and reset the browser URL, the raw
URL of the previous transition may not match the actual URL of the
browser at the end of the navigation process. For that reason, we need to use
`urlAfterRedirects` instead.
Other notes:
These checks in scheduleNavigation were added in eb2ceff4ba
The test still passes and, more surprisingly, passes if the checks are removed
completely. There have likely been changes to the navigation handling that
handle the test in a different way. That said, it still appears to be important
to keep the checks there in some capacity because it does affect how many
navigation events occur. This addresses an issue that came up in #16710: https://github.com/angular/angular/issues/16710#issuecomment-634869739
This also partially addresses #13586 in fixing history for imperative
navigations that are cancelled by guards.
PR Close#37716
Incremental compilation allows for the output state of one compilation to be
reused as input to the next compilation. This involves retaining references
to instances from prior compilations, which must be done carefully to avoid
memory leaks.
This commit fixes such a leak with a complicated retention chain:
* `TrackedIncrementalBuildStrategy` unnecessarily hangs on to the previous
`IncrementalDriver` (state of the previous compilation) once the current
compilation completes.
In general this is unnecessary, but should be safe as long as the chain
only goes back one level - if the `IncrementalDriver` doesn't retain any
previous `TrackedIncrementalBuildStrategy` instances. However, this does
happen:
* `NgCompiler` indirectly causes retention of previous `NgCompiler`
instances (and thus previous `TrackedIncrementalBuildStrategy` instances)
through accidental capture of the `this` context in a closure created in
its constructor. This closure is wrapped in a `ts.ModuleResolutionCache`
used to create a `ModuleResolver` class, which is passed to the program's
`TraitCompiler` on construction.
* The `IncrementalDriver` retains a reference to the `TraitCompiler` of the
previous compilation, completing the reference chain.
The final retention chain thus looks like:
* `TrackedIncrementalBuildStrategy` of current program
* `.previous`: `IncrementalDriver` of previous program
* `.lastGood.traitCompiler`: `TraitCompiler`
* `.handlers[..].moduleResolver.moduleResolutionCache`: cache
* (via `getCanonicalFileName` closure): `NgCompiler`
* `.incrementalStrategy`: `TrackedIncrementalBuildStrategy` of previous
program.
The closure link is the "real" leak here. `NgCompiler` is creating a closure
for `getCanonicalFileName`, delegating to its
`this.adapter.getCanonicalFileName`, for the purposes of creating a
`ts.ModuleResolutionCache`. The fact that the closure references
`NgCompiler` thus eventually causes previous `NgCompiler` iterations to be
retained. This is also potentially problematic due to the shared nature of
`ts.ModuleResolutionCache`, which is potentially retained across multiple
compilations intentionally.
This commit fixes the first two links in the retention chain: the build
strategy is patched to not retain a `previous` pointer, and the `NgCompiler`
is patched to not create a closure in the first place, but instead pass a
bound function. This ensures that the `NgCompiler` does not retain previous
instances of itself in the first place, even if the build strategy does
end up retaining the previous incremental state unnecessarily.
The third link (`IncrementalDriver` unnecessarily retaining the whole
`TraitCompiler`) is not addressed in this commit as it's a more
architectural problem that will require some refactoring. However, the leak
potential of this retention is eliminated thanks to fixing the first two
issues.
PR Close#37835
change in the definition of providedIn:any any instance creates a singleton instance
for each lazy loaded module and one instance for eager loaded module
PR Close#35292
PR https://github.com/angular/angular/pull/37523 failed when trying to use `rxjs delay` operator
inside `fakeAsync`, and the reasons are:
1. we need to import `rxjs-fake-async` patch to make the integration work.
2. since in `angular` repo, the bazel target `/tools/testing:node` not using `zone-testing` bundle,
instead it load `zone-spec` packages seperately, so it causes one issue which is the `zone.js/testing/fake-async`
package is not loaded, we do have a fallback logic under `packages/core/testing` calles `fake_async_fallback`,
but the logic is out of date with `fake-async` under `zone.js` package.
So this PR, I updated the content of `fake_async_fallback` to make it consistent with
`fake-async`. And I will make another PR to try to remove the `fallback` logic.
PR Close#37680
Close#33657
in jasmine 3.5, there is a new feature, user can pass a properties object to `jasmine.createSpyObj`
```
const spy = jasmine.createSpyObj('spy', ['method1'], {prop1: 'foo'});
expect(spy.prop1).toEqual('foo');
```
This case will not work for Angular TestBed, for example,
```
describe('AppComponent', () => {
beforeEach(() => {
//Note the third parameter
// @ts-ignore
const someServiceSpy = jasmine.createSpyObj('SomeService', ['someFunction'], ['aProperty']);
TestBed.configureTestingModule({
declarations: [
AppComponent
],
providers: [
{provide: SomeService, useValue: someServiceSpy},
]
}).compileComponents();
});
it('should create the app', () => {
//spyObj will have someFunction, but will not have aProperty
let spyObj = TestBed.get(SomeService);
});
```
Because `jasmine.createSpyObj` will create the `aProperty` with `enumerable=false`,
and `TestBed.configureTestingModule` will try to copy all the properties from spyObj to
the injected service instance. And because `enumerable` is false, so the property (here is aProperty)
will not be copied.
This PR will monkey patch the `jasmine.createSpyObj` and make sure the new property's
`enumerable=true`.
PR Close#34624
When ngcc creates an entry-point program, the `allowJs` option is enabled
in order to operate on the JavaScript source files of the entry-point.
A side-effect of this approach is that external modules that don't ship
declaration files will also have their JavaScript source files loaded
into the program, as the `allowJs` flag allows for them to be imported.
This may pose an issue in certain edge cases, where ngcc would inadvertently
operate on these external modules. This can introduce all sorts of undesirable
behavior and incompatibilities, e.g. the reflection host that is selected for
the entry-point's format could be incompatible with that of the external
module's JavaScript bundles.
To avoid these kinds of issues, module resolution that would resolve to
a JavaScript file located outside of the package will instead be rejected,
as if the file would not exist. This would have been the behavior when
`allowJs` is set to false, which is the case in typical Angular compilations.
Fixes#37508
PR Close#37596
Changes `isWithinPackage` to take an `AbsoluteFsPath` instead of `ts.SourceFile`,
to allow for an upcoming change to use it when no `ts.SourceFile` is available,
but just a path.
PR Close#37596
Previously, event listeners for component output events attached on an
Angular custom element before inserting it into the DOM (i.e. before
instantiating the underlying component) didn't fire for events emitted
during initialization lifecycle hooks, such as `ngAfterContentInit`,
`ngAfterViewInit`, `ngOnChanges` (initial call) and `ngOnInit`.
The reason was that `NgElementImpl` [subscribed to events][1] _after_
calling [ngElementStrategy#connect()][2], which is where the
[initial change detection][3] takes place (running the initialization
lifecycle hooks).
This commit fixes this by:
1. Ensuring `ComponentNgElementStrategy#events` is defined and available
for subscribing to, even before instantiating the component.
2. Changing `NgElementImpl` to subscribe to `NgElementStrategy#events`
(if available) before calling `NgElementStrategy#connect()` (which
initializes the component instance) if available.
3. Falling back to the old behavior (subscribing to `events` after
calling `connect()` for strategies that do not initialize `events`
before their `connect()` is run).
NOTE:
By falling back to the old behavior when `NgElementStrategy#events` is
not initialized before calling `NgElementStrategy#connect()`, we avoid
breaking existing custom `NgElementStrategy` implementations (with
@remackgeek's [ElementZoneStrategy][4] being a commonly used example).
Jira issue: [FW-2010](https://angular-team.atlassian.net/browse/FW-2010)
[1]: c0143cb2ab/packages/elements/src/create-custom-element.ts (L167-L170)
[2]: c0143cb2ab/packages/elements/src/create-custom-element.ts (L164)
[3]: c0143cb2ab/packages/elements/src/component-factory-strategy.ts (L158)
[4]: f1b6699495/projects/elements-zone-strategy/src/lib/element-zone-strategy.tsFixes#36141
PR Close#37570
Previously an error thrown in the `analyzeFn` would cause
the ngcc process to exit immediately without removing the
lockfile, and potentially before the unlocker process had been
successfully spawned resulting in the lockfile being orphaned
and left behind.
Now we catch these errors and remove the lockfile as needed.
PR Close#37739
Invoking a callback registered through `ViewRef.onDestroy` throws an error, because we weren't registering it correctly in the internal data structure. These changes also remove the `storeCleanupFn` function, because it was mostly identical to `storeCleanupWithContext` and was only used in one place.
Fixes#36213.
PR Close#37543
Special DI tokens like `ChangeDetectorRef` and `ElementRef` can provide a factory via `NG_ELEMENT_ID`. The problem is that we were reading it off the token as `token[NG_ELEMENT_ID]` which will go up the prototype chain if it couldn't be found on the current token, resulting in the private `ViewRef` API being exposed, because it extends `ChangeDetectorRef`.
These changes fix the issue by guarding the property access with `hasOwnProperty`.
Fixes#36235.
PR Close#37574
Verify that HTML parsing is supported in addition to DOMParser existence.
This maybe wasn't as important before when DOMParser was used just as a
fallback on Firefox, but now that DOMParser is the default choice, we need
to be more accurate.
PR Close#36578
The `inertDocument` member is only needed when using the InertDocument
strategy. By separating the DOMParser and InertDocument strategies into
separate classes, we can easily avoid creating the inert document
unnecessarily when using DOMParser.
PR Close#36578
If [innerHTML] is used in a component and a Content-Security-Policy is set
that does not allow inline styles then Firefox and Chrome show the following
message:
> Content Security Policy: The page’s settings observed the loading of a
resource at self (“default-src”). A CSP report is being sent.
This message is caused because Angular is creating an inline style tag to
test for a browser bug that we use to decide what sanitization strategy to
use, which causes CSP violation errors if inline CSS is prohibited.
This test is no longer necessary, since the `DOMParser` is now safe to use
and the `style` based check is redundant.
In this fix, we default to using `DOMParser` if it is available and fall back
to `createHTMLDocument()` if needed. This is the approach used by DOMPurify
too.
The related unit tests in `html_sanitizer_spec.ts`, "should not allow
JavaScript execution when creating inert document" and "should not allow
JavaScript hidden in badly formed HTML to get through sanitization (Firefox
bug)", are left untouched to assert that the behavior hasn't changed in
those scenarios.
Fixes#25214.
PR Close#36578
This commit fixes a bug whereby the language service would incorrectly
return HTML elements if autocomplete is requested for an unknown symbol.
This is because we walk through every possible scenario, and fallback to
element autocomplete if none of the scenarios match.
The fix here is to return results from interpolation if we know for sure
we are in a bound text. This means we will now return an empty results if
there is no suggestions.
This commit also refactors the code a little to make it easier to
understand.
PR Close#37518
This commit replaces an assert with more descriptive error message that is thrown in case `<ng-template>` or `<ng-container>` is used as host element for a Component.
Resolves#35240.
PR Close#35916
The shims_for_IE.js file contains vendor code that predates the third_party
directory. This file is currently used for internal karma testing setup. This
change corrects this by moving the shims_for_IE file to //third_part/
PR Close#37624
`getExternalFiles()` is an API that could optionally be provided by a tsserver plugin
to notify the server of any additional files that should belong to a particular project.
This API was removed in https://github.com/angular/angular/pull/34260 mainly
due to performance reasons.
However, with the introduction of "solution-style" tsconfig in typescript 3.9,
the Angular extension could no longer reliably detect the owning Project solely
based on the ancestor tsconfig.json. In order to support this use case, we have
to reinstate `getExternalFiles()`.
Fixes https://github.com/angular/vscode-ng-language-service/issues/824
PR Close#37750
Adds the publishConfig registry value to the package.json of the
@angular/benchpress package to publish it via wombat rather than
through npm directly.
PR Close#37752
This commit disables all diagnostic tests for DynamicValue diagnostics which
make assertions about the diagnostic filename while running tests on Windows.
Such assertions are currently suffering from a case sensitivity issue.
PR Close#37763
Several partial_evaluator tests in the diagnostics_spec check assert
correctness of diagnostic filenames. Previously these assertions compared
a resolved (`absoluteFrom`) filename with the TypeScript `ts.SourceFile`'s
`fileName` string, which caused the tests to fail on Windows because the
drive letter case differed.
This commit changes the assertions to use `absoluteFromSourceFile` instead
of the `fileName` string, resulting in an apples-to-apples comparison of
canonicalized paths.
PR Close#37758
Currently when bootstrapped component is being removed using `ComponentRef.destroy` or `NgModuleRef.destroy` methods, DOM nodes may be retained in the DOM tree. This commit fixes that problem by always attaching host element of the internal root view to the component's host view node, so the cleanup can happen correctly.
Resolves#36449.
PR Close#37600
In version 10.0.0-next.8, we introduced absolute URL support for
server-based HTTP requests, so long as the fully-resolved URL was
provided in the initial config. However, doing so represents a
breaking change for users who already have their own interceptors
to model this functionality, since our logic executes before all
interceptors fire on a request. See original PR #37071.
Therefore, we introduce a flag to make this change consistent with
v9 behavior, allowing users to opt in to this new behavior. This
commit also fixes two issues with the previous implementation:
1. if the server was initiated with a relative URL, the absolute
URL construction would fail because needed components were empty
2. if the user's absolute URL was on a port, the port would not
be included
PR Close#37539
As of v10, the `undecorated-classes-with-decorated-fields` migration
generally deals with undecorated classes using Angular features. We
intended to run this migation as part of v10 again as undecorated
classes with Angular features are no longer supported in planned v11.
The migration currently behaves incorrectly in some cases where an
`@Injectable` or `@Pipe` decorated classes uses the `ngOnDestroy`
lifecycle hook. We incorrectly add a TODO for those classes. This
commit fixes that.
Additionally, this change makes the migration more robust to
not migrate a class if it inherits from a component, pipe
injectable or non-abstract directive. We previously did not
need this as the undecorated-classes-with-di migration ran
before, but this is no longer the case.
Last, this commit fixes an issue where multiple TODO's could be
added. This happens when multiple Angular CLI build targets have
an overlap in source files. Multiple programs then capture the
same source file, causing the migration to detect an undecorated
class multiple times (i.e. adding a TODO twice).
Fixes#37726.
PR Close#37732
This commit introduces a dedicated `DynamicValue` kind to indicate that a value
cannot be evaluated statically as the function body is not just a single return
statement. This allows more accurate reporting of why a function call failed
to be evaluated, i.e. we now include a reference to the function declaration
and have a tailor-made diagnostic message.
PR Close#37587
During AOT compilation, the value of some expressions need to be known at
compile time. The compiler has the ability to statically evaluate expressions
the best it can, but there can be occurrences when an expression cannot be
evaluated statically. For instance, the evaluation could depend on a dynamic
value or syntax is used that the compiler does not understand. Alternatively,
it is possible that an expression could be statically evaluated but the
resulting value would be of an incorrect type.
In these situations, it would be helpful if the compiler could explain why it
is unable to evaluate an expression. To this extend, the static interpreter
in Ivy keeps track of a trail of `DynamicValue`s which follow the path of nodes
that were considered all the way to the node that causes an expression to be
considered dynamic. Up until this commit, this rich trail of information was
not surfaced to a developer so the compiler was of little help to explain
why static evaluation failed, resulting in situations that are hard to debug
and resolve.
This commit adds much more insight to the diagnostic that is produced for static
evaluation errors. For dynamic values, the trail of `DynamicValue` instances
is presented to the user in a meaningful way. If a value is available but not
of the correct type, the type of the resolved value is shown.
Resolves FW-2155
PR Close#37587
Previously, an anonymous type was used for creating a diagnostic with related
information. The anonymous type would then be translated into the necessary
`ts.DiagnosticRelatedInformation` shape within `makeDiagnostic`. This commit
switches the `makeDiagnostic` signature over to taking `ts.DiagnosticRelatedInformation`
directly and introduces `makeRelatedInformation` to easily create such objects.
This is done to aid in making upcoming work more readable.
PR Close#37587
Samuel
Andrew Scott
ivanwonder
Pete Bacon Darwin
David Shevitz 🔵
crisbeto
Paul Gschwendtner
George Kalpakas
pkozlowski-opensource
Olivier Combe
Andrew Kushnir
Ruben Schuckit
Dmitrij Kuba
Judy Bogart
Alex Rickabaugh
Santosh Yadav
JiaLiPassion
JoostK
Harri Lehtola
Keen Yee Liau
Joey Perrott
Keen Yee Liau
Adam