Previously the last file-system being tested was left as the current
file-system. Now it is reset to an `InvalidFileSystem` to ensure future
tests are not affected.
PR Close#31544
Moves all google3 migration tslint rules into a single directory.
This makes it easier to wire up multiple migration rules in
google3 without having to update the rule directories each time
a new migration is available.
PR Close#30956
Introduces a new migration schematic for adding the "@Injectable()"
decorator to provider classes which are currently not migrated. Previously
in ViewEngine, classes which are declared as providers sometimes don't
require the "@Injectable()" decorator
(e.g. https://stackblitz.com/edit/angular-hpo7gw)
With Ivy, provider classes need to be explicitly decorated with
the "@Injectable()" decorator if they are declared as providers
of a given module. This commit introduces a migration schematic
which automatically adds the explicit decorator to places where
the decorator is currently missing.
The migration logic is designed in a CLI devkit and TSlint agnostic
way so that we can also have this migration run as part of a public
CLI migration w/ `ng update`. This will be handled as part of a follow-up to reiterate on console output etc.
Resolves FW-1371
PR Close#30956
The way the `ComponentFactory.create` is set up at the moment is that if a `rootSelectorOrNode` is passed in, the root context will be injected instead of creating dedicated one for the component. As far as I can tell, there doesn't seem to be a reason to do this and nothing seems to break because of it. These changes switch to always create the root context.
PR Close#31661
In ViewEngine nodes that were inserted through `Renderer2` would also be picked up by `DebugNode.query` and `DebugNode.queryAll`. This worked because everything in ViewEngine went through `Renderer2` and `DebugRenderer2` in dev mode which was able to keep track of the child nodes as they're being inserted. This no longer works in Ivy, because we don't use `DebugRenderer2` and debug nodes work a little differently. These changes work around the issue by walking the DOM as the logical tree is being walked and looking for matches. Note that this is __not__ optimal, because we're walking similar trees multiple times. ViewEngine could do it more efficiently, because all the insertions go through Renderer2, however that's not the case in Ivy. This approach is being used because:
1. Matching the ViewEngine behavior would mean potentially introducing a depedency from `Renderer2` to Ivy which could bring Ivy code into ViewEngine.
2. We would have to make `Renderer3` "know" about debug nodes.
3. It allows us to capture nodes that were inserted directly via the DOM.
PR Close#31716
This commit updates the `_clone` function of the `_ApplySourceSpanTransformer` class, where the for-in loop was used, resulting in copying from prototype to own properties, thus consuming more memory. Prior to NodeJS 12 (V8 versions before 7.4) there was an optimization that was improving the situation and since that logic was removed in favor of other optimizations, the situation with memory consumption caused by the for-in loop got worse. This commit adds a check to make sure we copy only own properties over to cloned object.
Closes#31627.
PR Close#31638
When injecting a `ChangeDetectorRef` into a pipe, the expected result is that the ref will be tied to the component in which the pipe is being used. This works for most cases, however when a pipe is used inside a property binding of a component (see test case as an example), the current `TNode` is pointing to component's host so we end up injecting the inner component's view. These changes fix the issue by only looking up the component view of the `TNode` if the `TNode` is a parent.
This PR resolves FW-1419.
PR Close#31438
In the previous patch () all the existing styling code was turned
off in favor of using the new refactored ivy styling code. This
patch is a follow up patch to that and removes all old, unused
styling code from the render3 directory.
PR Close#31193
This commit fixes a bug where ICU expressions inserted into ngTemplateOutlets
that are inside ngFor blocks would throw an error. We were assuming in view
insertion code that text nodes would always exist by the time a view\`s
creation block had executed. This is not true for text nodes created dynamically
by ICUs because this happens in the update block (in `i18nApply`).
This change ensures such dynamically created nodes are skipped when encountered
too early (as they will be attached later by i18n code anyway).
PR Close#31789
We currently have a handwritten version of the Ivy directive def for NgClass so
we can switch between Ivy and View Engine behavior. This generated code needs to
be kept up-to-date with what the Ivy compiler generates.
PR 30742 recently changed `classMap` such that it now requires allocation of
host binding slots. This means that the `allocHostVars()` function must be
called in the NgClass directive def to match compiler output, but the
handwritten directive def was not updated. This caused a bug where NgClass
was inappropriately overwriting data for other directives because space was
not allocated for its values.
PR Close#31788
This commit bumps the heap size of node/ngc under bazel to 4 GB instead of
the previous 2 GB. This brings it in sync with what the TS compiler uses
in g3, and fixes a bug where ngc would crash with OOM in worker mode.
PR Close#31784
Currently, template expressions and statements have their location
recorded relative to the HTML element they are in, with no handle to
absolute location in a source file except for a line/column location.
However, the line/column location is also not entirely accurate, as it
points an entire semantic expression, and not necessarily the start of
an expression recorded by the expression parser.
To support record of the source code expressions originate from, add a
new `sourceSpan` field to `ASTWithSource` that records the absolute byte
offset of an expression within a source code.
Implement part 2 of [refactoring template parsing for
stability](https://hackmd.io/@X3ECPVy-RCuVfba-pnvIpw/BkDUxaW84/%2FMA1oxh6jRXqSmZBcLfYdyw?type=book).
PR Close#31391
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.
PR Close#30742
Versions of CLI prior to angular/angular-cli@0e339ee did not expose the host.getModifiedResourceFiles() method.
This meant that null was being passed through to the IncrementalState.reconcile() method
to indicate that there were either no changes or the host didn't support that method.
This commit fixes a bug where we were checking for undefined rather than null when
deciding whether any resource files had changed, causing a null reference error to be thrown.
This bug was not caught by the unit testing because the tests set up the changed files
via a slightly different process, not having access to the CompilerHost, and these test
were making the erroneous assumption that undefined indicated that there were no
changed files.
PR Close#31322
Currently developers can use the `By` class to construct common
`DebugElement` query predicates. e.g. `By.directive(MyDirective)`.
The `directive()` and `all()` predicates are currently returning
a predicate that works for `DebugElement` nodes. This return type
is too strict since the predicate is not specific to `DebugElement`
instances and can also apply to `DebugNode` instances.
Meaning that developers are currently able to use the `directive()`
predicate when using `queryAllNodes()`. This is a common practice
but will break when the project is compiled with TypeScript's
`--strictFunctionTypes` flag as the `DebugElement` predicate type
is not assignable to predicates for `DebugNode`. In order to make
these predicates usable with `--strictFuntionTypes` enabled, we
adjust the predicate type to reflect what is actually needed for
evaluation of the predicate.
PR Close#30993
Fixes all TypeScript failures caused by enabling the `--strict`
flag for test source files. We also want to enable the strict
options for tests as the strictness enforcement improves the
overall codehealth, unveiled common issues and additionally it
allows us to enable `strict` in the `tsconfig.json` that is picked
up by IDE's.
PR Close#30993
In View Engine, developers can pass bootstrap and entry components
as nested arrays. e.g.
```ts
export const MyOtherEntryComponents = [A, B, C]
@NgModule({
entryComponents: [MyComp, MyOtherEntryComponents]
})
```
Currently using nested arrays for these properties causes
unexpected errors to be reported in Ivy since the semantic
NgModule checks aren't properly recursing into the nested
entry/bootstrap components. This issue has been unveiled by
enabling the strict function parameter checks.
PR Close#30993
Currently the `ɵɵdefineComponent` method has incorrect type
definitions the `directives` and `pipes` metadata property.
The incorrect types allow developers to pass in already instantiated
`DirectiveDef` or `ComponentDef` objects. This can cause unexpected
failures because the definition internally only expects `Type` objects
and now incorrectly tries to read the `ngDirectiveDef` or `ngComponentDef`
of existing definitions.
This issue has been unveiled by enabling the strict function parameter
types flag, where the directive definitions are determined from each array
element in the `directives` or `pipes` property (which can throw).
PR Close#30993
As part of FW-1265, the `@angular/compiler` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.
Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)
PR Close#30993
As part of FW-1265, the `@angular/core` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.
Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)
PR Close#30993
Previously, the usage of `null` and `undefined` keywords in code that is
statically interpreted by ngtsc resulted in a `DynamicValue`, as they were
not recognized as special entities. This commit adds support to interpret
these keywords.
PR Close#31150
The support for decorators that were imported via a namespace,
e.g. `import * as core from `@angular/core` was implemented
piecemeal. This meant that it was easy to miss situations where
a decorator identifier needed to be handled as a namepsaced
import rather than a direct import.
One such issue was that UMD processing of decorators was not
correct: the namespace was being omitted from references to
decorators.
Now the types have been modified to make it clear that a
`Decorator.identifier` could hold a namespaced identifier,
and the corresponding code that uses these types has been
fixed.
Fixes#31394
PR Close#31426
Fixes Ivy matching directives against attribute bindings (e.g. `[attr.some-directive]="foo"`). Works by excluding attribute bindings from the attributes array during compilation. This has the added benefit of generating less code.
**Note:** My initial approach to implementing this was to have a different marker for attribute bindings so that they can be ignored when matching directives, however as I was implementing it I realized that the attributes in that array were only used for directive matching (as far as I could tell). I decided to drop the attribute bindings completely, because it results in less generated code.
PR Close#31541
Data members in TypeScriptServiceHost of Map type should be eagerly
initialized to address issue/24571. This eliminates the need to
constantly check for truthiness and makes code much more readable.
More PRs to follow to address issue/24571.
PR Close#31577
Prior to this commit, default value for LOCALE_ID was not setup for Closure Compiler. In Closure Compiler, we can use `goog.LOCALE` as a default value, which will be replaced at build time with current locale.
PR Close#31519
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).
These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.
These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.
PR Close#31550
Add support for indexing elements in the indexing module.
Opening and self-closing HTML tags have their selector indexed, as well
as the attributes on the element and the directives applied to an
element.
PR Close#31240
If zonejs is sent undefined callbacks it proceeds to attempt to call them, then fails, catches it own fail, rewrites the stack to hide the mistake, and reports a TypeError with a callstack unrelated to inputs.
Throw early if the callback is undefined (as can happen if JS or any-ified TS calls zone invokeTask).
Check for undefined onCommplete callback to zonejs jasmine wrapper.
PR Close#31497
Switch back to passing a custom bazel host instead of rewriting one that
is passed to `compile` now that the Angular indexer is stable.
Revert "feat(bazel): allow passing and rewriting an old bazel host"
This reverts commit 0a4c1c8f803a65f5c156af90e67f7d7d68ebc7f8.
PR Close#31496
There are two places in the ngcc processing where it needs to load the
content of a file given by a general path:
* when determining the format of an entry-point.
To do this ngcc uses the value of the relevant property in package.json.
But in the case of `main` it must parse the contents of the entry-point
file to decide whether the format is UMD or CommonJS.
* when parsing the source files for dependencies to determine the order in
which compilation must occur. The relative imports in each file are parsed
and followed recursively, looking for external imports.
Previously, we naively assumed that the path would match the file name exactly.
But actually we must consider the standard module resolution conventions.
E.g. the extension (.js) may be missing, or the path may refer to a directory
containing an index.js file.
This commit fixes both places.
This commit now requires the `DependencyHost` instances to check
the existence of more files than before (at worst all the different possible
post-fixes). This should not create a significant performance reduction for
ngcc. Since the results of the checks will be cached, and similar work is
done inside the TS compiler, so what we lose in doing it here, is saved later
in the processing. The main performance loss would be where there are lots
of files that need to be parsed for dependencies that do not end up being
processed by TS. But compared to the main ngcc processing this dependency
parsing is a small proportion of the work done and so should not impact
much on the overall performance of ngcc.
// FW-1444
PR Close#31509
Prior to this fix, the logic to set the right placeholder format for ICUs was a bit incorrect: if there was a nested ICU in one of the root ICU cases, that led to a problem where placeholders in subsequent branches used the wrong ({$placeholder}) format instead of {PLACEHOLDER} one. This commit updates the logic to make sure we properly transform all placeholders even if nested ICUs are present.
PR Close#31516
Prior to this commit, it was impossible to override providers defined via ModuleWithProviders using TestBed.overrideProvider API. The problem was caused by the fact that we were not taking into account these providers while calculating accumulated set of provider overrides. This commit updates the logic to extract providers from ModuleWithProviders and calculate the final set of overrides taking them into account.
PR Close#31415
Since, 7186f9c01 `compiler-cli` is no longer depending on `shelljs` for
production code. (We still use it in tests and infrastructure/tooling.)
Incidentally, this should also help with #29460.
PR Close#31468
Removes direct calls from one instruction into another, moves the shared logic into a separate function and removes the state getters from the shared function.
This PR resolves FW-1340.
PR Close#31456
Previously, resource paths beginning with '/' (aka "rooted" paths, which
are not actually absolute filesystem paths, but are relative to the
TypeScript project root directory) were not handled correctly. The leading
'/' was stripped and the path was resolved as if it was relative, but with
no containing file for context. This led to resources in different rootDirs
not being found.
Instead, such rooted paths are now resolved without TypeScript's help, by
checking each root directory. A test is added to this effect.
PR Close#31511
When determining if a `main` path points to a UMD or CommonJS
format, the contents of the file need to be loaded and parsed.
Previously, it was assumed that the path referred to the exact filename,
but did not account for normal module resolution semantics, where the
path may be missing an extension or refer to a directory containing an
`index.js` file.
// FW-1444
PR Close#31509
Since `goog.getMsg` does not process ICUs (post-processing is required via goog.i18n.MessageFormat, https://google.github.io/closure-library/api/goog.i18n.MessageFormat.html) and placeholder format used for ICUs and regular messages inside `goog.getMsg` are different, the current implementation (that assumed the same placeholder format) needs to be updated. This commit updates placeholder format used inside ICUs from `{$placeholder}` to `{PLACEHOLDER}` to better align with Closure. ICU placeholders (that were left as is prior to this commit) are now replaced with actual values in post-processing step (inside `i18nPostprocess`).
PR Close#31459
Prior to this commit, the `` unicode symbol that represents `&ngsp` in translations was not handled correctly, i.e. was not replaced with a whitespace, thus appearing on a screen. This commit adds post-processing and replaces the mentioned symbol with a whitespace.
PR Close#31479
This commit adds a test that verifies no translations are generated for bound attributes and also checks (as a part of the `verify` function) that VE and Ivy handle this case the same way.
PR Close#31481
`i18nStart` was calling `allocExpando` even if there was 0 new variable created.
This created a new expando instruction with the value 0 which was later interpreted as the start of a new expando block instead of just skipping 0 instructions.
FW-1417 #resolve
PR Close#31451
Fixes Ivy's return value for `DebugNode.context` not being consistent for the case where there is both a structural directive and a component on a node. In `ViewEngine` the instance of the component would be returned, whereas in Ivy the context of the directive is returned.
Also adds a couple of extra test cases for how `DebugNode.context` deals with directives.
This PR resolves FW-1343.
PR Close#31442
Adds a new `elementContainer` instruction that can be used to avoid two instruction (`elementContainerStart` and `elementContainerEnd`) for `ng-container` that has text-only content. This is particularly useful when we have `ng-container` inside i18n sections.
This PR resolves FW-1105.
PR Close#31444
Paths can be mapped directly to files, which was not being taken
into account when computing `basePaths` for the `EntryPointFinder`s.
Now if a `pathMapping` pattern does not exist or is a file, then we try
the containing folder instead.
Fixes#31424
PR Close#30525
Previously, ngcc had to walk the entire `node_modules` tree looking for
entry-points, even if it only needed to process a single target entry-point
and its dependencies.
This added up to a few seconds to each execution of ngcc, which is noticeable
when being run via the CLI integration.
Now, if an entry-point target is provided, only that target and its entry-points
are considered rather than the whole folder tree.
PR Close#30525
When profiling ngcc it is notable that a large amount of time
is spent dealing with an exception that is thrown (and handled
internally by fs) when checking the existence of a file.
We check file existence a lot in both finding entry-points
and when TS is compiling code. This commit adds a simple
cached `FileSystem`, which wraps a real `FileSystem` delegate.
This will reduce the number of calls through to `fs.exists()` and
`fs.readFile()` on the delegate.
Initial benchmarks indicate that the cache is miss to hit ratio
for `exists()` is about 2:1, which means that we save about 1/3
of the calls to `fs.existsSync()`.
Note that this implements a "non-expiring" cache, so it is not suitable
for a long lived `FileSystem`, where files may be modified externally.
The cache will be updated if a file is changed or moved via
calls to `FileSystem` methods but it will not be aware of changes
to the files system from outside the `FileSystem` service.
For ngcc we must create a new `FileSystem` service
for each run of `mainNgcc` and ensure that all file operations
(including TS compilation) use the `FileSystem` service.
This ensures that it is very unlikely that a file will change
externally during `mainNgcc` processing.
PR Close#30525
This message gets called if a format has already been
compiled and we only want the first. So the message itself
is wrong but it is also not very useful anyway.
PR Close#30525
The ngcc tool adds namespaced imports to files when compiling. The ngtsc
tooling was not processing types correctly when they were imported via
such namespaces. For example:
```
export declare class SomeModule {
static withOptions(...): ModuleWithProviders<ɵngcc1.BaseModule>;
```
In this case the `BaseModule` was being incorrectly attributed to coming
from the current module rather than the imported module, represented by
`ɵngcc1`.
Fixes#31342
PR Close#31367
If a package delcares a class internally on an NgModule, ngcc
needs to be able to add a public export to this class's type.
Previously, if the typing file for the declared is not imported
from the typings entry-point file, then ngcc cannot find it.
Now we try to guess the .d.ts files from the equivalent .js
files.
PR Close#31411
This partially reverts some changes from 71b9371180 (diff-dd469785fca8680a5b33b1e81c5cfd91R1420)
These broke the g3sync of zone.js because we use the output of the TypeScript compiler directly, rather than rely on the rollup commonjs plugin to define the global symbol
PR Close#31453
Non-wild-card path-mappings were not being matched correctly.
Further path-mapped secondary entry-points that
were imported from the associated primary entry-point were not
being martched correctly.
Fixes#31274
PR Close#31450
This is needed in g3 where the translation system is sensitive to the full path of the output.
For Bazel users, we don't want this because it would force them to
disable a Bazel option that prevents using the deprecated ctx.new_file
API
PR Close#31410
Adds a schematic and tslint rule that automatically migrate the consumer from `Renderer` to `Renderer2`. Supports:
* Renaming imports.
* Renaming property and method argument types.
* Casting to `Renderer`.
* Mapping all of the methods from the `Renderer` to `Renderer2`.
Note that some of the `Renderer` methods don't map cleanly between renderers. In these cases the migration adds a helper function at the bottom of the file which ensures that we generate valid code with the same return value as before. E.g. here's what the migration for `createText` looks like.
Before:
```
class SomeComponent {
createAndAddText() {
const node = this._renderer.createText(this._element.nativeElement, 'hello');
node.textContent += ' world';
}
}
```
After:
```
class SomeComponent {
createAndAddText() {
const node = __rendererCreateTextHelper(this._renderer, this._element.nativeElement, 'hello');
node.textContent += ' world';
}
}
function __rendererCreateTextHelper(renderer: any, parent: any, value: any) {
const node = renderer.createText(value);
if (parent) {
renderer.appendChild(parent, node);
}
return node;
}
```
This PR resolves FW-1344.
PR Close#30936
Updates the decision made in #31341; this is for the Angular indexer
inside Google. The indexer currently passes (and ngc-wrapped#compile
accepts) a bazel host to use, but because many methods are overwritten
specially for Angular compilation a better approach is to pass an old
bazel compiler host and siphon methods needed off of it before creating
a new host. This enables that.
PR Close#31381
Adds the new `classMapInterpolate1` through `classMapInterpolate8` instructions which handle interpolations inside the `class` attribute and moves the interpolation logic internally. This allows us to remove the `interpolationX` instructions in a follow-up PR.
These changes also add an error if an interpolation is encountered inside a `style` tag (e.g. `style="width: {{value}}"`). Up until now this would actually generate valid instructions, because `styleMap` goes through the same code path as `classMap` which does support interpolation. At runtime, however, `styleMap` would set invalid styles that look like `<div style="0:w;1:i;2:d;3:t;4:h;5::;7:1;">`. In `ViewEngine` interpolations inside `style` weren't supported either, however there we'd output invalid styles like `<div style="unsafe">`, even if the content was trusted.
PR Close#31211
There's no build time dependency from @angular/core to @angular/compiler,
so core can't directly refer to compiler types. To overcome this limitation,
there's a facade layer defined in the compiler and duplicated in core,
such that during runtime all types will correctly align.
There's a testcase in the compiler that verifies that all such facade types
are compatible across core and compiler, such that the core types can't get
misaligned with the actual definitions in the compiler. This suite of
tests were missing the `R3BaseMetadataFacade` facade type, so it was possible
for this type to get out of sync.
PR Close#31210
When a class uses Angular decorators such as `@Input`, `@Output` and
friends without an Angular class decorator, they are compiled into a
static `ngBaseDef` field on the class, with the TypeScript declaration
of the class being altered to declare the `ngBaseDef` field to be of type
`ɵɵBaseDef`. This type however requires a generic type parameter that
corresponds with the type of the class, however the compiler did not
provide this type parameter. As a result, compiling a program where such
invalid `ngBaseDef` declarations are present will result in compilation
errors.
This commit fixes the problem by providing the generic type parameter.
Fixes#31160
PR Close#31210
after update to rules_nodejs 0.32.1, @types are no longer automatically discovered by ngc-wrapped (which uses parts of ts_library) so this test needed updating so that the types files it generates is added as an explicit dep
PR Close#31325
...tsetse now falsely asserting on some lines in a few tests such as packages/core/schematics/test/injectable_pipe_migration_spec.ts.
```
await runMigration();
expect(tree.readContent('/index.ts'))
```
it asserts that "await is required on promise" on the 2nd line when there is no promise there
PR Close#31325
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)
@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802
also updates to rules_rass commit compatible with rules_nodejs 0.32.0
PR Close#31325
ctx.actions.declare_file now used in @angular/bazel ng_module rule as ctx.new_file is now deprecated. Fixes error:
```
File "ng_module.bzl", line 272, in _expected_outs
ctx.new_file(ctx.genfiles_dir, (ctx.label.name ..."))
Use ctx.actions.declare_file instead of ctx.new_file.
Use --incompatible_new_actions_api=false to temporarily disable this check.
```
This can be worked around with incompatible_new_actions_api flag but may as well fix it proper so downstream doesn't require this flag due to this code.
Also, depset() is no longer iterable by default without a flag. This required fixing in a few spots in @angular/bazel.
fix: foo
PR Close#31325
Some formats of CommonJS put the decorator helper calls
outside the class IIFE as statements on the top level of the
source file.
This commit adds support to the `CommonJSReflectionHost`
for this format.
PR Close#31335
Prior to this commit, host element of a view created via TestBed.createComponent was not attached to the component's host, making it problematic to use TestBed.createComponent API in component factories, which might be used for testing purposes only. This behavior is observed in google3 app tests and was supported by VE, so this commit aligns Ivy and VE.
PR Close#31318
Enable users to pass a custom Bazel CompilerHost to use for an Angular
compilation. This supports users who must override the TypeScript
compiler host.
PR Close#31341
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.
This PR resolves FW-1404.
PR Close#31296
Without this change when using UrlTree redirects in `urlUpdateStrategy="eager"`, the URL would get updated to the target location, then redirected. This resulted in having an additional entry in the `history` and thus the `back` button would be broken (going back would land on the URL causing a new redirect).
Additionally, there was a bug where the redirect, even without `urlUpdateStrategy="eager"`, could create a history with too many entries. This was due to kicking off a new navigation within the navigation cancelling logic. With this PR the new navigation is pushed to the next tick with a `setTimeout`, allowing the page being redirected from to be cancelled before starting a new navigation.
Related to #27148
PR Close#31168
When `walkTNodeTree` was refactored, the case of ICU expressions was forgotten (because it was handled in the `else` previously).
This PR fixes that to handle it like `ElementContainer`.
FW-1411 #resolve
PR Close#31313
The TS compiler is likely to test paths with extensions and try to
load them as files. Therefore `fileExists()` and methods that rely
on it need to be able to distinguish between real files and directories
that have paths that look like files.
This came up as a bug in ngcc when trying to process `ngx-virtual-scroller`,
which relies upon a library called `@tweenjs/tween.js`.
PR Close#31289
Previously, (presummably due to a typo) the `okToCacheOpaque` argument
of `DataGroup#cacheResponse()` was essentially never taken into account
(since opaque responses have a non-200 status code and thus `res.ok` is
always false).
This commit fixes the typo, which allows opaque responses to be cached
when `okToCacheOpaque` is true (i.e. in data groups using the
`freshness` strategy).
Fixes#30968
PR Close#30977
This commit doesn't change the behavior wrt caching, but it makes it
more explicit that only non-timed-out responses are cached. In case of a
timeout, `res` would be set to a programmatically created 504
`Response`, so `cacheResponse()` (which checks for `res.ok`) would not
have cached it anyway, but this makes change makes it more explicit (and
more similar to the equivalent part in [handleFetchWithFreshness()][1]).
[1]: https://github.com/angular/angular/blob/2b4d5c754/packages/service-worker/worker/src/data.ts#L379-L388
PR Close#30977
Previously, opaque responses where handled a little differently than
other responses from the mock server. More specifically, they were not
tracked (so no assertions could be made for them) and their
[`Body` mixin][1] methods (such as `arrayBuffer()`, `json()`, `text()`)
would throw an error due to `body` being `null`.
This commit ensures opaque responses are also captured on the mock
server and also changes `Body` mixin methods to better simulate the
[spec'd behavior][2].
(These improvements will be necessary to test caching of opaque
responses in a subsequent commit.)
[1]: https://developer.mozilla.org/en-US/docs/Web/API/Body
[2]: https://fetch.spec.whatwg.org/#concept-body-consume-body
PR Close#30977
Currently in Ivy whenever we encounter a new namespace, we set it in the global state so that all subsequent nodes are created under the same namespace. Next time a template is run the namespace will be reset back to HTML.
This breaks down if the last node that was rendered was under the SVG or MathML namespace and we create a component through `ViewContainerRef.create`, because the next template function hasn't run yet and it hasn't had the chance to update the namespace. The result is that the root node of the new component will retain the wrong namespace and may not end up rendering at all (e.g. if we're trying to show a `div` inside the SVG namespace). This issue has the potential to affect a lot of apps, because all components inserted through the router also go through `ViewContainerRef.create`.
PR Close#31232
These files have not been formatted properly, due to issues in the
`gulp format*` tasks. See previous commits (or #31295) for more details.
PR Close#31295
If an entry-point has missing dependencies then it cannot be
processed and is marked as invalid. Similarly, if an entry-point
has dependencies that have been marked as invalid then that
entry-point too is invalid. In all these cases, ngcc should quietly
ignore these entry-points and continue processing what it can.
Previously, if an entry-point had more than one entry-point that
was transitively invalid then ngcc was crashing rather than
ignoring the entry-point.
PR Close#31276
The Angular runtime frequently calls into user code (for example, when
writing to a property binding). Since user code can throw errors, calls to
it are frequently wrapped in a try-finally block. In Ivy, the following
pattern is common:
```typescript
enterView();
try {
callUserCode();
} finally {
leaveView();
}
```
This has a significant problem, however: `leaveView` has a side effect: it
calls any pending lifecycle hooks that might've been scheduled during the
current round of change detection. Generally it's a bad idea to run
lifecycle hooks after the application has crashed. The application is in an
inconsistent state - directives may not be instantiated fully, queries may
not be resolved, bindings may not have been applied, etc. Invariants that
the app code relies upon may not hold. Further crashes or broken behavior
are likely.
Frequently, lifecycle hooks are used to make assertions about these
invariants. When these assertions fail, they will throw and "swallow" the
original error, making debugging of the problem much more difficult.
This commit modifies `leaveView` to understand whether the application is
currently crashing, via a parameter `safeToRunHooks`. This parameter is set
by modifying the above pattern:
```typescript
enterView();
let safeToRunHooks = false;
try {
callUserCode();
safeToRunHooks = true;
} finally {
leaveView(..., safeToRunHooks);
}
```
If `callUserCode` crashes, then `safeToRunHooks` will never be set to `true`
and `leaveView` won't call any further user code. The original error will
then propagate back up the stack and be reported correctly. A test is added
to verify this behavior.
PR Close#31244
Our module resolution prefers `.js` files over `.d.ts` files because
occasionally libraries publish their typings in the same directory
structure as the compiled JS files, i.e. adjacent to each other.
The standard TS module resolution would pick up the typings
file and add that to the `ts.Program` and so they would be
ignored by our analyzers. But we need those JS files, if they
are part of the current package.
But this meant that we also bring in JS files from external
imports from outside the package, which is not desired.
This was happening for the `@fire/storage` enty-point
that was importing the `firebase/storage` path.
In this commit we solve this problem, for the case of imports
coming from a completely different package, by saying that any
file that is outside the package root directory must be an external
import and so we do not analyze those files.
This does not solve the potential problem of imports between
secondary entry-points within a package but so far that does
not appear to be a problem.
PR Close#30591
Rather than passing a number of individual arguments, we can
just pass an `EntryPointBundle`, which already contains them.
This is also a precursor to using more of the properties in the bundle.
PR Close#30591
This will allow users of the `EntryPointBundle` to use some of the `EntryPoint`
properties without us having to pass them around one by one.
PR Close#30591
Previously we expected the constructor parameter `decorators`
property to be an array wrapped in a function. Now we also support
an array not wrapped in a function.
PR Close#30591
Some packages do not actually provide a `typings` field in their
package.json. But TypeScript naturally infers the typings file from
the location of the JavaScript source file.
This commit modifies ngcc to do a similar inference when finding
entry-points to process.
Fixes#28603 (FW-1299)
PR Close#30591
There are scenarios where it is not possible for ngcc to guess the format
or configuration of an entry-point just from the files on disk.
Such scenarios include:
1) Unwanted entry-points: A spurious package.json makes ngcc think
there is an entry-point when there should not be one.
2) Deep-import entry-points: some packages allow deep-imports but do not
provide package.json files to indicate to ngcc that the imported path is
actually an entry-point to be processed.
3) Invalid/missing package.json properties: For example, an entry-point
that does not provide a valid property to a required format.
The configuration is provided by one or more `ngcc.config.js` files:
* If placed at the root of the project, this file can provide configuration
for named packages (and their entry-points) that have been npm installed
into the project.
* If published as part of a package, the file can provide configuration
for entry-points of the package.
The configured of a package at the project level will override any
configuration provided by the package itself.
PR Close#30591
Previously each test relied on large shared mock file-systems, which
makes it difficult to reason about what is actually being tested.
This commit breaks up these big mock file-systems into smaller more
focused chunks.
PR Close#30591
To improve cross platform support, all file access (and path manipulation)
is now done through a well known interface (`FileSystem`).
For testing a number of `MockFileSystem` implementations are provided.
These provide an in-memory file-system which emulates operating systems
like OS/X, Unix and Windows.
The current file system is always available via the static method,
`FileSystem.getFileSystem()`. This is also used by a number of static
methods on `AbsoluteFsPath` and `PathSegment`, to avoid having to pass
`FileSystem` objects around all the time. The result of this is that one
must be careful to ensure that the file-system has been initialized before
using any of these static methods. To prevent this happening accidentally
the current file system always starts out as an instance of `InvalidFileSystem`,
which will throw an error if any of its methods are called.
You can set the current file-system by calling `FileSystem.setFileSystem()`.
During testing you can call the helper function `initMockFileSystem(os)`
which takes a string name of the OS to emulate, and will also monkey-patch
aspects of the TypeScript library to ensure that TS is also using the
current file-system.
Finally there is the `NgtscCompilerHost` to be used for any TypeScript
compilation, which uses a given file-system.
All tests that interact with the file-system should be tested against each
of the mock file-systems. A series of helpers have been provided to support
such tests:
* `runInEachFileSystem()` - wrap your tests in this helper to run all the
wrapped tests in each of the mock file-systems.
* `addTestFilesToFileSystem()` - use this to add files and their contents
to the mock file system for testing.
* `loadTestFilesFromDisk()` - use this to load a mirror image of files on
disk into the in-memory mock file-system.
* `loadFakeCore()` - use this to load a fake version of `@angular/core`
into the mock file-system.
All ngcc and ngtsc source and tests now use this virtual file-system setup.
PR Close#30921
No longer uses docker in order to pull down the toolchain configs
for remote build execution. We don't need to make docker a prerequisite
for working on the Angular repository since we can leverage the checked-in
toolchain configurations from the `@bazel-toolchains` repository.
PR Close#31251
Prior to this commit, the logic to extract query information from class fields used an instance of regular Error class to throw an error. As a result, some useful information (like reference to a specific field) was missing. Replacing Error class with FatalDiagnosticError one makes the error more verbose that should simplify debugging.
PR Close#31123
after update to rules_nodejs 0.32.1, @types are no longer automatically discovered by ngc-wrapped (which uses parts of ts_library) so this test needed updating so that the types files it generates is added as an explicit dep
PR Close#31019
...tsetse now falsely asserting on some lines in a few tests such as packages/core/schematics/test/injectable_pipe_migration_spec.ts.
```
await runMigration();
expect(tree.readContent('/index.ts'))
```
it asserts that "await is required on promise" on the 2nd line when there is no promise there
PR Close#31019
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)
@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802
also updates to rules_rass commit compatible with rules_nodejs 0.32.0
PR Close#31019
ctx.actions.declare_file now used in @angular/bazel ng_module rule as ctx.new_file is now deprecated. Fixes error:
```
File "ng_module.bzl", line 272, in _expected_outs
ctx.new_file(ctx.genfiles_dir, (ctx.label.name ..."))
Use ctx.actions.declare_file instead of ctx.new_file.
Use --incompatible_new_actions_api=false to temporarily disable this check.
```
This can be worked around with incompatible_new_actions_api flag but may as well fix it proper so downstream doesn't require this flag due to this code.
Also, depset() is no longer iterable by default without a flag. This required fixing in a few spots in @angular/bazel.
fix: foo
PR Close#31019
Add an IndexingContext class to store indexing information and a
transformer module to generate indexing analysis. Integrate the indexing
module with the rest of NgtscProgram and add integration tests.
Closes#30959
PR Close#31151
Previously, the usage of equality operators ==, ===, != and !== was not
supported in ngtsc's static interpreter. This commit adds support for
such operators and includes tests.
Fixes#31076
PR Close#31145
Since Angular v8, and commit b3dda0e, `parseUrl()` can be called without
`relativeTo`, thus `new URL()` can be called with `relativeTo = undefined`.
Safari does not like it and the service worker registration fails:
```js
new URL('https://angular.io/') // OK
new URL('https://angular.io/', undefined) // TypeError
```
Closes#31061
PR Close#31140
Under Bazel, we don't yet support Stylus and Less, and thus we should not offer the users to generate applications which are known not to work.
Closes#31209
PR Close#31234
In ViewEngine injecting a Renderer2 returns a renderer that is specific to the particular component, however in Ivy we inject the renderer for the parent view instead. This causes it to set incorrect `ngcontent` attributes when creating elements through the renderer.
The issue comes from the fact that the `Renderer2` is created according to the current `LView`, but because DI happens before we've entered the `LView` of the component that's injecting the renderer, we end up with one that's one level up. We work around the issue by finding the `LView` that corresponds to the `previousOrParentTNode` inside of the parent view and associating the `Renderer2` with it.
This PR resolves FW-1382.
PR Close#31063
Change the Element constructor in r3_ast to create a new ParseSourceSpan when regenerating it rather than extending an object, which does not contain the overloaded toString().
PR Close#31190
Previously, multiple ViewContainerRef instances (obtained by injecting
ViewContainerRef multiple times) each had private state that could be out of
sync with actual LContainer, if views were inserted/removed/queried across
the different instances. In particular each instance had its own array which
tracked ViewRefs inserted via that instance.
This commit moves the ViewRefs array onto the LContainer itself, so that it
can be shared across multiple ViewContainerRef instances. A test is added
that verifies ViewContainerRefs now provide a consistent view of the
container.
FW-1377 #resolve
PR Close#30985
Optimizations to skip compiling source files that had not changed
did not account for the case where only a resource file changes,
such as an external template or style file.
Now we track such dependencies and trigger a recompilation
if any of the previously tracked resources have changed.
This will require a change on the CLI side to provide the list of
resource files that changed to trigger the current compilation by
implementing `CompilerHost.getModifiedResourceFiles()`.
Closes#30947
PR Close#30954
The function `bind` has been internalized wherever it was needed, this PR makes sure that it is no longer publicly exported.
FW-1385 #resolve
PR Close#31131
Adds two new helper functions that can be used when unit testing Angular services
that depend upon upgraded AngularJS services, or vice versa.
The functions return a module (AngularJS or NgModule) that is configured to wire up
the Angular and AngularJS injectors without the need to actually bootstrap a full
hybrid application.
This makes it simpler and faster to unit test services.
PR Close#16848
This commit fixes a couple of issues with TS 3.5 compatibility in order to
unblock migration of g3. Mostly 'any's are added, and there are no behavior
changes.
PR Close#31174
Move the definition leadingTriviaChars included in parsing a template
to the parameters of parseTemplate. This allows overriding of the
default leadingTriviaChars, which is needed by some pipelines like the
indexing pipeline because leadingTriviaChars may throw off the recorded
span of selectors.
PR Close#31136
Currently the `RecursiveAstVisitor` that is part of the template expression
parser does not _always_ properly pass through the context that can be
specified when visting a given expression. Only a handful of AST types
pass through the context while others are accidentally left out. This causes
unexpected and inconsistent behavior and basically makes the `context`
parameter not usable if the type of template expression is not known.
e.g. the template variable assignment migration currently depends on
the `RecursiveAstVisitor` but sometimes breaks if developers use
things like conditionals in their template variable assignments.
Fixes#31043
PR Close#31085
A temporary check is in place to determine whether a key in an object
literal needs to be quoted during emit. Previously, only the presence of
a dash caused a key to become quoted, this however is not sufficient for
@angular/flex-layout to compile properly as it has dots in its inputs.
This commit extends the check to also use quotes when a dot is present.
Fixes#30114
PR Close#31146
Currently the `placeholders` parameter inside `i18nLocalize` is defaulted to `{}`, which means that we'll always hit the `Object.keys` call below. Since it's very likely that we won't have placeholders in the majority of strings, these changes add an extra guard so that we don't hit it on every invocation.
PR Close#31106
Currently each property binding generates an instruction like this:
```
property('prop1', ctx.value1);
property('prop2', ctx.value2);
```
The problem is that we're repeating the call to `property` for each of the properties. Since the `property` instruction returns itself, we can chain all of the calls which is more compact and it looks like this:
```
property('prop1', ctx.value1)('prop2', ctx.value2);
```
These changes implement the chaining behavior for regular property bindings and for synthetic ones, however interpolated ones are still handled like before, because they use a separate instruction.
This PR resolves FW-1389.
PR Close#31078
```
NgLSHost: AngularLanguageServiceHost
NgLS: AngularLanguageService
```
NgLSHost should not depend on NgLS, because it introduces circular
dependency.
Instead, the `getTemplateAst` and `getTemplatAstAtPosition` methods should
be moved to NgLSHost and exposed as public methods.
This removes the circular dependency, and also removes the need for the
awkward 'setSite' method in NgLSHost.
PR Close#31122
* Updates buildifier to a version that also comes with windows binaries.
* Fixes a few new formatting/lint warnings
* Removes the `args-order` warning because it is no longer a warning.. and is now part of the formatter.
PR Close#31112
Add support for indexing of property reads, method calls in a template.
Visit AST of template syntax expressions to extract identifiers.
Child of #30959
PR Close#30963
i18nExp now uses `bind` internally rather than having the compiler generate it in order to bring it in line with other functions like `textBinding` & `property`.
FW-1384 #resolve
PR Close#31089
When using `createEmbeddedView` after the creation of an ICU expression, the nodes for the current selected case were not reprojected (only the anchor comment node was moved to the new location).
Now we reproject correctly all the child nodes of an ICU expression when an anchor comment node is projected.
FW-1372 #resolve
PR Close#30979
The generated Bazel workspace by the `@angular/bazel` builder should
use the latest stable NodeJS version. This is necessary because some
packages like `selenium-webdriver` which are part of the default bazel
setup in order to support `ng e2e` depend on a minimum NodeJS version
of `10.15.0`.. This means that running e2e tests in a plain new bazel CLI
project (`ng new {projectName} --collection=@angular/bazel`) errors.
```
command.
(error selenium-webdriver@4.0.0-alpha.3: The engine "node" is incompatible with
this module. Expected version ">= 10.15.0". Got "10.13.0"
error Found incompatible module
)
```
PR Close#31088
Packages that have been compiled using an older version of TypeScript
can have their decorators at the top-level of the ES5 bundles, instead
of inside the IIFE that is emitted for the class. Before this change,
ngcc only took static property assignments inside the IIFE into account,
therefore missing the decorators that were assigned at the top-level.
This commit extends the ES5 host to look for static properties in two
places. Testcases for all bundle formats that contain ES5 have been added
to ensure that this works in the various flavours.
A patch is included to support UMD bundles. The UMD factory affects how
TypeScripts binds the static properties to symbols, see the docblock of
the patch function for more details.
PR Close#30795
- Splits core functionality off into a shared internal function
- ɵɵtextBinding will no longer require an index
- Alters the compiler to stop generating an index argument for the instruction
- Updates tests
- Updates some usage of ɵɵtextBinding in i18n to use the helper function instead
PR Close#30792
The DI's `locateDirectiveOrProvider` function operates on `TView` / `TNode`
data structures only so doesn't need to access `LView`. This refactoring
changes the argument list so the mentioned function takes less info to do
its work.
This refactoring is also mandatory for the upcoming query matching move
to TView.
PR Close#31006
Currently in Ivy we throw when attempting to destroy a `ComponentRef` that has been destroyed, however in ViewEngine we didn't which can cause some tests to break. These changes remove the error to match ViewEngine.
These changes resolve FW-1379.
PR Close#31022
The `EntryPointFinder` computes the base paths to consider
when searching for entry-points. When there are `pathMappings`
provided it works out the best top level base-paths that cover all
the potential mappings.
If this computed basePath happens to coincide with an entry-point
path itself then we were missing it.
Now we check for an entry-point even at the base-path itself.
Related to https://github.com/angular/angular-cli/pull/14755
PR Close#31027
Commit 58be2ff884 has been created
before c0386757b1 landed, and therefore
the newly created compliance test was using an outdated expectation.
This commit updates the compliance test to no longer contain
the outdated expectation.
PR Close#30983
To provide some context: The implicit receiver is part of the
parsed Angular template AST. Any property reads in bindings,
interpolations etc. read from a given object (usually the component
instance). In that case there is an _implicit_ receiver which can also
be specified explicitly by just using `this`.
e.g.
```html
<ng-template>{{this.myProperty}}</ng-template>
```
This works as expected in Ivy and View Engine, but breaks in case the
implicit receiver is not used for property reads. For example:
```html
<my-dir [myFn]="greetFn.bind(this)"></my-dir>
```
In that case the `this` will not be properly translated into the generated
template function code because the Ivy compiler currently always treats
the `ctx` variable as the implicit receiver. This is **not correct** and breaks
compatibility with View Engine. Rather we need to ensure that we retrieve
the root context for the standalone implicit receiver similar to how it works
for property reads (as seen in the example above with `this.myProperty`)
Note that this requires some small changes to the `expression_converter`
because we only want to generate the `eenextContent()` instruction if the
implicit receiver is _actually_ used/needed. View Engine determines if that is the case by recursively walking through the converted output AST and
checking for usages of the `o.variable('_co')` variable ([see here][ve_check]). This would work too for Ivy, but involves most likely more code duplication
since templates are isolated in different functions and it another pass
through the output AST for every template expression.
[ve_check]: 0d6c9d36a1/packages/compiler/src/view_compiler/view_compiler.ts (L206-L208)
Resolves FW-1366.
PR Close#30897
In a derived service class with no decorator (and therefore no factory) of
its own, the factory function of the base class will be used instead.
Previously this logic had a bug where the factory function would be called
with no arguments, which would incorrectly create an instance of the base
class.
This commit adds logic to call the base class' factory and pass the type of
the derived class, which will correctly construct an instance of the
derived class using the base class' factory. A test is also added to verify
correctness of this behavior.
PR Close#30855
Factory functions written by the compiler optionally allow an explicit type
to be passed. If called with this type, an instance of the given type will
be created instead of the type for which the factory was generated. This is
used to power inheritance of Angular types, as if the constructor of a class
is inherited from its superclass, then the factory function of the
superclass must be used (it has all the DI info) to construct an instance of
the derived class.
This commit adjusts typings in a few places to allow factory functions to be
called with this extra type parameter.
PR Close#30855
In older browsers such as IE10, inheritance of static properties on class
types is implemented by copying the properties. This makes hasOwnProperty
unreliable for checking if a static property is defined directly on a class
or is inherited. This causes problems when trying to read the
ngInjectableDef properties of inherited services, as in IE10 even inherited
definitions will appear to be local.
Instead, the 'token' property on ngInjectableDef can be leveraged to detect
when a definition is read which doesn't belong to the type itself.
PR Close#30855
The compiler generates a 'token' field when it emits an ngInjectableDef,
but this field was not required by defineInjectable or the InjectableDef
interface, nor was it added by InjectionToken.
This commit makes 'token' required and adds it where missing.
PR Close#30855
Before this change, user's tsconfig.json is cloned and some options
controlled by Bazel are removed otherwise Bazel would complain about:
```
WARNING: your tsconfig.json file specifies options which are overridden by Bazel:
- compilerOptions.target and compilerOptions.module are controlled by downstream dependencies, such as ts_devserver
- compilerOptions.typeRoots is always set to the @types subdirectory of the node_modules attribute
- compilerOptions.rootDir and compilerOptions.baseUrl are always the workspace root directory
```
Since the warning has been removed in rules_typescript/8d8d398, there's no
need to clone and backup tsconfig.json
PR Close#30877
17d87d4e10 has been created before the changes
to the `@ViewChild` and `@ContentChild` decorators. Meaning that it still uses the queries
without the `static` flag. This results in failures in `master` because #30625 has been merged.
PR Close#30967
9d9c9e43e5 has been created a few days ago
and wasn't rebased on top of recent changes that introduces a commonjs host.
This means that tests for the commonjs host haven't been updated to work with
the changes from from #30492 and now fail in `master`.
PR Close#30967
Currently undecorated classes are intentionally not processed
with ngcc. This is causing unexpected behavior because decorator
handlers such as `base_def.ts` are specifically interested in class
definitions without top-level decorators, so that the base definition
can be generated if there are Angular-specific class members.
In order to ensure that undecorated base-classes work as expected
with Ivy, we need to run the decorator handlers for all top-level
class declarations (not only for those with decorators). This is similar
to when `ngtsc` runs decorator handlers when analyzing source-files.
Resolves FW-1355. Fixes https://github.com/angular/components/issues/16178
PR Close#30821
When determining the module type of a bundle pointed to by the "main"
property, ngcc needs to read the bundle to figure out if it is CommonJS
or UMD format. However, when the "main" property does not exist ngcc
would crash while determining the path to the main bundle file.
This commit fixes the crash by checking if the "main" property is present
at all, before attempting to derive a full path to the bundle file.
Fixes#30916
Fixes FW-1369
PR Close#30950
`TView.firstChild` was defined as the first node with index 0, but when we use runtime i18n then the instruction `i18nStart` can be the one with index 0 and the first node will be index 1 or more.
With this fix we set `TView.firstChild` when we see the first node with index 0 or later if `TView.firstChild` is still null.
FW-1367 #resolve
PR Close#30920
* entry_point attribute of nodejs_binary & rollup_bundle is now a label
* symlinking of node_modules for yarn_install temporarily disabled (except for integration/bazel) until the fix for https://github.com/bazelbuild/bazel/issues/8487 makes it into a future bazel release
PR Close#30627
nodejs rules 0.30.1 has new feature to symlink node_modules with yarn_install and bazel 0.26.0 includes new managed_directories feature which enables this
PR Close#30627
This work is being done ahead of changes to how view insertion is done in Ivy in accordance with [this design document](https://hackmd.io/Ae3W_2pOQlKouu9YNy1t6A?view).
The idea is to make sure we have acceptance tests ahead of that change.
PR Close#30625
The usage of array spread syntax in source code may be downleveled to a
call to TypeScript's `__spread` helper function from `tslib`, depending
on the options `downlevelIteration` and `emitHelpers`. This proves
problematic for ngcc when it is processing ES5 formats, as the static
evaluator won't be able to interpret those calls.
A custom foreign function resolver is not sufficient in this case, as
`tslib` may be emitted into the library code itself. In that case, a
helper function can be resolved to an actual function with body, such
that it won't be considered as foreign function. Instead, a reflection
host can now indicate that the definition of a function corresponds with
a certain TypeScript helper, such that it becomes statically evaluable
in ngtsc.
Resolves#30299
PR Close#30492
- Refactors compiler to stop generating `ɵɵselect(0)` instructions
- Alters template execution to always call the equivalent of `ɵɵselect(0)` before running a template in update mode
- Updates tests to not check for or call `ɵɵselect(0)`.
The goal here is to reduce the size of generated templates
PR Close#30830
Service worker API `navigator.serviceWorker.register` can fail in multiple ways.
For example, in Chrome, with an unstable network connection you can have the
following error: `An unknown error occurred when fetching the script.`
In the current state, it creates an `Uncaught (in promise) TypeError:` style of
error, which cannot be caught by the user on his own.
I think it's better to log the error over raising an error that cannot be
caught.
PR Close#30876
The `renderStringify` function shows up pretty high in the CPU profiling.
Turns out that this function contained unnecessary `typeof` check for
function types - the check only makes sense / is used in error messages.
The PR also alligns how ivy and view engine stringify functions used in
interpolations.
PR Close#30838
In Ivy the `DebugNode.attributes` is populated directly from the DOM, but the problem is that the browser will lowercase all attribute names. These changes preserve the case by first going through the `TNode.attrs`, populating the map with the case-sensitive names and saving a reference to the lower case name. Afterwards when we're going through the attributes from the DOM, we can check whether we've mapped the attribute by its case-sensitive name already.
This PR resolves FW-1358.
PR Close#30864
A directive input that doesn't use a binding is triggered during the creation phase. But this was only executed at the first template pass, and not on subsequent ones.
Now only the creation of the update instruction is executed on the first template pass, anything else is executed every time a template is created.
FW-1361 #resolve
PR Close#30870
When translated content was projected, all of the content was reappended, even the placeholders that had been removed in the translation.
To avoid that we added a new flag on `TNode` that specifies that a node is detached, in which case it should be ignored by the projection.
FW-1319 #resolve
PR Close#30783
Fixes Ivy throwing an error if it runs into an empty property binding on an `ng-template` (e.g. `<ng-template [something]=""></ng-template>`) by not generating an update instruction for it.
Fixes#30801.
This PR resoves FW-1356.
PR Close#30829
When ngcc processes an entrypoint, it updates `package.json` with
metadata about the processed format. Previously, it overwrote the
`package.json` with the stringified JSON object without spaces. This
made the file difficult to read (for example when looking at the file
while debugging an ngcc failure).
This commit fixes it by using spaces in the new `package.json` content.
PR Close#30831
- Removes ɵɵelementProperty instruction
- Updates tests that were using it
- NOTE: There is one test under `render3/integration_spec.ts` that is commented out, and needs to be reviewed. Basically, I could not find a good why to test what it was doing, because it was doing things that I am not sure we could generate in an acceptance test.
PR Close#30645
Added a new syntax for projections (`¤` will represent `ng-content` nodes) so that we can treat them specifically.
When we enter an i18n block with the instruction `i18nStart`, a new `delayProjection` variable is set to true to prevent the instruction `projection` from projecting the nodes. Once we reach the `i18nEnd` instruction and encounter a projection in the translation we will project its nodes.
If a projection was removed from a translation, then its nodes won't be projected at all.
The variable `delayProjection` is restored to `false` at the end of `i18nEnd` so that it doesn't stop projections outside of i18n blocks.
FW-1261 #resolve
PR Close#30782
We used to ignore empty strings for optimization purposes, but it turns out that empty strings are also valid values for ICU cases and we shouldn't ignore those.
FW-1290 #resolve
PR Close#30846
When an `ng-template` element has a variable declaration without a value,
it is assigned the value of the `$implicit` property in the embedded view's
context. The template compiler inserts a property access to `$implicit` for
template variables without a value, however the type-check code generation
logic did not. This resulted in incorrect type-checking code being generated.
Fixes FW-1326
PR Close#30675
Some HTML attributes don't correspond to their DOM property name, in which
case the runtime will apply the appropriate transformation when assigning
a property using its attribute name. One example of this is the `for`
attribute, for which the DOM property is named `htmlFor`.
The type-checking machinery in ngtsc must also take this mapping into
account, as it generates type-check code in which unclaimed property bindings
are assigned to properties of (subtypes of) `HTMLElement`.
Fixes#30607
Fixes FW-1327
PR Close#30675
Before this change we would systematically call LQueries.clone() when executting
elementStart / elementContainerStart instructions. This was often unnecessary as
LQueries can be mutated under 2 conditions only:
- we are crossing an element that has directives with content queries
(new queries must be added);
- we are descending into element hierarchy (creating a child element of an existing element)
and the current LQueries object is tracking shallow queries (shallow queries are removed).
With this PR LQueires.clone() is only done when needed and this gratelly reduces number
of LQueries object created: in the "expanding rows" benchmark number of allocated
(and often GCed just after!) LQueries is reduced from ~100k -> ~35k. This represents
over 1MB of memory that is not allocated.
PR Close#30664
Pete Bacon Darwin
Paul Gschwendtner
crisbeto
Andrew Kushnir
Matias Niemelä
Kara Erickson
Alex Rickabaugh
Pawel Kozlowski
Keen Yee Liau
Ayaz Hafiz
Miško Hevery
Balint Mero
Matt Lewis
Momin Khan
Judy Bogart
JoostK
nikz99
Jon Wallsten
vikerman
Joey Perrott
George Kalpakas
Hamid
Olivier Combe
Alex Eagle
Michael Prentice
Greg Magolan
Alan
Jason Aden
Umair Sarfraz
Santosh Yadav
Hoel IRIS
JiaLiPassion
Matt Lewis
Ben Lesh
cexbrayat
Jeremy Elbourn
Bowen Ni
Umberto Tarantino