When a UrlTree of root url was returned by a guard as a redirection, the
navigation was not processed. The issue came from the error handler which
incorrectly marked the router as already navigated.
Fixes#27845
PR Close#28271
Previously, `ng-packages-installer` would replace the version ranges for
all dependencies that were peer dependencies of an Angular package with
the version range used in the Angular package. This effectively meant
that the pinned version (from `yarn.lock`) for that dependency was
ignored (even if the pinned version satisfied the new version range).
This commit reduces non-determinism in CI jobs using the locally built
Angular packages by always using pinned versions of dependencies for
Angular package peer dependencies if possible.
For example, assuming the following versions for the RxJS dependency:
- **aio/package.json**: `rxjs: ^6.3.0`
- **aio/yarn.lock**: `rxjs@^6.3.0: 6.3.3`
- **@angular/core#peerDependencies**: `rxjs: ^6.0.0`
...the following versions would be used with `ng-packages-installer`:
- Before this commit:
- **aio/package.json**: `rxjs: ^6.0.0`
- **node_modules/rxjs/**: `6.4.0` (latest version satisfying `^6.0.0`)
- After this commit:
- **aio/package.json**: `rxjs: ^6.3.0`
- **node_modules/rxjs/**: `6.3.3` (because it satisfies `^6.0.0`)
PR Close#28510
`ng-packages-installer` can be used to replace Angular packages with
locally built ones (from `dist/packages-dist/`) along with their peer
dependencies.
Previously, in order to achieve this, `yarn install` was called with the
`--no-lockfile` option, which resulted in installing the latest versions
of all dependencies (including transitive ones) permitted by the
corresponding version ranges in `package.json` files. As a result, newly
released versions would be picked, resulting in unexpected,
non-deterministic breakages in CI.
This commit calls `yarn install` with the `--pure-lockfile` option
instead. As a result, only the Angular packages (for which the locally
built ones are used) and their peer dependencies are unpinned; the
pinned versions from `yarn.lock` are used for all other (direct and
transitive) dependencies.
While this does not eliminate non-determinism across builds, it
significantly reduces it.
PR Close#28510
Since b43f8bc7d, RxJS does not need to be patched any more in the
top-level `node_modules/`, so we don't need to special-case RxJS in
`ng-package-installer` and use `node_modules/rxjs/`.
PR Close#28510
Adds `--no-sandbox` in order to disable the sandbox when running Protractor through Bazel. Enabling the sandbox causes Chrome to crash under certain environments.
PR Close#28557
The docs don't mention that the app will never be stable if a `setInterval` is running somewhere, and that it will prevent the servcie worker to be registered too.
PR Close#28102
Note that this allows Angular to depend on the entirety of the ES2015 API, not just our restricted subset.
This change is needed because our copy of the subset was out-of-date, and prevents us using ES2015 target in dev mode.
This is a subset of #27738
PR Close#28570
Previously, in order for the `aio_monitoring` failure notifications to
work, the steps up to `define_env_vars` should have succeeded. This
meant that any failures in earlier steps would not send notifications.
This commit fixes it by making the notification step independent of the
`define_env_vars` step.
PR Close#28555
In most cases, it doesn't make a difference, because the cache does
already exist and is not saved. In the few cases where the dependencies
change (and the cache needs to be updated), it makes more sense to save
the cache in the `build-npm-packages` job, because most jobs depend on
it and thus will be able to take advantage of the updated cache right
away.
This seems to be an oversight in b26ac1c22.
PR Close#28555
`LView` `HOST` was set in most cases right after creating `LView`.
This makes the API cleaner by explicitly passing it ont `createLView`.
PR Close#28461
There is no debouncing when we store the scroll Position.
Currently, we have a message in the console after a while:
>Throttling history state changes to prevent the browser from hanging
see: https://bugs.chromium.org/p/chromium/issues/detail?id=786211 for more informations
PR Close#28368
If RAW_PERFLOG_PATH is passed in as an option, benchpress saves chrome's
performance log to a json file. This allows developers to download the
json file and upload it to their browser to get a breakdown of chrome-side
resource usage during a test.
PR Close#27551
When we first started writing tests for Ivy, we did not yet have a
compatible compiler. For this reason, we set up the Ivy runtime tests
to run with generated code that we wrote by hand (instead of real code
generated by the compiler).
Now that we have a working Ivy compiler and TestBed infrastructure
that is compatible with Ivy, we should start writing integration
tests that leverage them (no more handwritten generated code!). This
will prevent bugs where the compiler code and runtime code become
out of sync (which is easy if they are tested separately). And
eventually, we should migrate all the existing runtime tests in
"core/test/render3" to TestBed and ngtsc.
To kick off this effort, this commit migrates some existing tests
from "core/test/render3/exports_spec.ts" and saves them in a new file
with the same name in the "core/test/acceptance" folder.
PR Close#28534
i18n instructions create text nodes dynamically and save them between bindings and the expando block in `LView`. e.g., they try to create the following order in `LView`.
```
| -- elements -- | -- bindings -- | -- dynamic i18n text -- | -- expando (dirs, injectors) -- |
```
Each time a new text node is created, it is pushed to the end of the array and the `expandoStartIndex` marker is incremented, so the section begins slightly later. This happens in `allocExpando`.
This is fine if no directives have been created yet. The end of the array will be in the "dynamic text node" section.
| -- elements -- | -- bindings -- | -- dynamic i18n text -- |
However, this approach doesn't work if dynamic text nodes are created after directives are matched (for example when the directive uses host bindings). In that case, there are already directives and injectors saved in the "expando" section. So pushing to the end of `LView` actually pushes after the expando section. What we get is this:
```
| -- elements -- | -- bindings -- | -- dynamic i18n text -- | -- expando -- | -- dynamic i18n text-- |
```
In this case, the `expandoStartIndex` shouldn't be incremented because we are not inserting anything before the expando section (it's now after the expando section). But because it is incremented in the code right now, it's now pointing to an index in the middle of the expando section.
This PR fixes that so that we only increment the `expandoStartIndex` if nothing was pushed into the expando section.
FW-978 #resolve
PR Close#28424
Prior to this change there was no i18n id sanitization before we output goog.getMsg calls. Due to the fact that message ids are used as a part of const names, some characters were bcausing issues while executing generated code. This commit adds sanitization to i18n ids used to generate i18n-related consts.
PR Close#28522
Currently, DOM node removal called `removeChild` on the saved parent
node when destroying a component. However, this will fail if the
component has been manually moved in the DOM. This change makes the
removal always use the node's real `parentNode` and ignore the provided
`parent`.
PR Close#28455
Ivy allows Components to extend Directives (but not the other way around) and as a result we may have Component and Directive annotations present at the same time. The logic that resolves annotations to pick the necessary one didn't take this into account and as a result Components were recognized as Directives (and vice versa) in case of inheritance. This change updates the resolution logic by picking known annotation that is the nearest one (in inheritance tree) and compares it with expected type. That should help avoid mis-classification of Components/Directives during resolution.
PR Close#28439
Currently our version of Yarn is installed through
the "circleci/node" docker image. This is problematic
because in order to be able to update Yarn, we always
need to update the docker image to a version that
comes with the desired Yarn version. Sometimes there
is no docker image with the desired latest Yarn version,
and therefore we cannot easily update the Yarn version.
Additionally updating the docker image also means that
we need to update our version of NodeJS, as well as the
version of `openssl` might have changed (meaning that
our encrypted credential files may not be decodable with
the new version of `openssl`)
PR Close#28546
The logic to create additional files needed for Bazel are currently
hosted in `ng new`. Such files include the main.*.ts files needed
for AOT and a different angular.json to use Bazel builder, among others.
This commit refactors the logic into `ng add` so that it can be used to
perform the same modifications in an existing project. Users could do so
by running `ng add @angular/bazel`.
With this change, `ng new` effectively becomes an orchestrator that runs
the original `ng new` followed by `ng add @angular/bazel`.
PR Close#28436
Filipe Silva
stoneLeaf
George Kalpakas
Kristiyan Kostadinov
cexbrayat
Marc Laval
Alex Eagle
Stephen Fluin
Miško Hevery
Matias Niemelä
Pawel Kozlowski
WilliamKoza
Omar Griffin
Kara Erickson
Olivier Combe
Andrew Kushnir
Jeremy Elbourn
kevinphelps
Andrew Seguin
Greg Magolan
Paul Gschwendtner
Keen Yee Liau