The Material units tests job has been disabled with the
typescript upgrade PR since the components repository was
still on an old TypeScript version (due to cyclic dependencies
between the framework and components repository).
Since the components repository has been updated to `9.0.0-next.15`
and now uses the compatible TypeScript version, we can re-enable
ds
Related to this change, we need to ignore the `package.json`
engines when installing the dependencies of the components repo. This
is because the components repo already updated to NodeJS v12 and Yarn
v1.19.1. This is not the case for the CI setup of framework. For now,
since we don't want to change the dev setup (as it slows down
development), we temporarily disable the engines.
Additionally, the material unit tests job now depends on the actual
release packages (not on the ngtsc compiled ones). This is because
the components repo setup relies on NGCC being run. This is also
helpful for validating ngcc against the framework packages.
PR Close#33530
Previously, when one wanted to try out the changes from a PR before it
was merged, they had to check out the PR locally and build the Angular
packages themselves (which is time-consuming and wasteful given that the
packages have already been built on CI).
This commit persists all Angular packages on each build as `.tgz` files,
which can be used to install dependencies on an project (supported by
both [npm][1] and [yarn][2]). In addition to individual `.tgz` files for
each package, a `.tgz` file including all packages is also stored, which
can be used to test the packages locally by overwriting the ones in the
`node_modules/` directory of a project.
CircleCI [build artifacts][3] an be used for longer-term storage of the
outputs of a build and are designed to be useful around the time of the
build, which suits our needs.
[1]: https://docs.npmjs.com/cli/install.html
[2]: https://yarnpkg.com/lang/en/docs/cli/add
[3]: https://circleci.com/docs/2.0/artifacts
PR Close#33321
Updates the commit of the Angular components repository for
which the `material-unit-tests` job runs tests against. We need to
update to the latest commit at the time of writing, in order to be able
to remove the gesture tests from the material-ci/blocklist.
This is now possible because the Angular components repository
removes the dependency on `hammerjs` completely.
PR Close#33221
Updates the `material-unit-test` job to run tests against
the latest commit of the Angular Components repository.
The components repository updated to rules_nodejs#0.38.2 before Angular Bazel did.
To do this, the `@angular/bazel` v0.38.2 compatibility changes were patched on postinstall.
This now conflicts because we install a `@angular/bazel` version in the `material-unit-tests` job
that already includes these compatibility changes. This would result in the patch being a noop
for which the `patch` command throws an error.
We can remove this once components can install a released version of `@angular/bazel` that is
compatible with `rules_nodejs#0.38.2`.
PR Close#33073
Updates the `material-unit-test` job to run tests against
the latest commit of the Angular Components repository.
We need to update to a version where components already
updated to `rules_nodejs#0.38.0`.
PR Close#32889
The `init_environment` custom command is used in almost all other jobs.
The this is implemented in CircleCI is that the steps of the command are
inlined into the other jobs.
Some of the `init_environment` commands are quite long and (since the
default display name for a step is its command) they clutter the
CircleCI UI. Additionally, multiple related commands are shown as
separate steps, which makes it more difficult to get to the actual steps
of a job.
This commit improves this by:
1. Defining explicit, short names for steps with long commands.
2. Grouping multiple related steps into one.
PR Close#32998
The angular.io project uses Angular and CLI v9, which by default turns
on Ivy mode. However, since ec4381dd4, we explicitly opt out of Ivy.
This commit removes the `enabledIvy: false` configuration, thus allowing
the default behavior of having Ivy on.
NOTE:
This commit only changes the angular.io projects. The docs examples need
to be updated separately (first to Angular and CLI v9 and then to Ivy).
PR Close#32923
Removes the selection strategies for `AngularTemplateCompile` and `TypeScriptCompile` causing
them to use the automatic selection strategies instead.
PR Close#32678
Previously, the docker images used on CI where specified by a tag
(`10.16` and `10.16-browsers`). Since tags are not immutable, this only
pins specific characteristics of the environment (e.g. the OS type and
the Node.js version), but not others. Especially when using a tag that
does not specify the patch version (e.g. `10.16` instead of `10.16.0`),
it is inevitable that the image will change at some point, potentially
leading to unrelated failures due to changes in the environment.
One source of such failures can be the Chrome version used in tests.
Since we install a specific ChromeDriver version (that is only
compatible with specific Chrome version ranges), unexpectedly updating
to a newer Chrome version may break the tests if the new version falls
outside the range of supported version for our pinned ChromeDriver.
Using a tag that specifies the patch version (e.g. `10.16.0`) or even
the OS version (e.g. `10.16.0-buster`) is safer (i.e. has a lower
probability of introducing the kind of breakages described above), but
is still not fully hermetic.
This commit prevents such breakages by pinning the docker images by ID.
Image IDs are based on the image's digest (SHA256) and are thus
immutable, ensuring that all CI jobs will be running on the exact same
image.
See [here][1] for more info on pre-built CircleCI docker images and more
specifically [pinning images by ID][2].
[1]: https://circleci.com/docs/2.0/circleci-images
[2]: https://circleci.com/docs/2.0/circleci-images#using-a-docker-image-id-to-pin-an-image-to-a-fixed-version
PR Close#32602
This commit expands the `lint` CircleCI job to also run the
`tools/verify-codeownership.js` script. This script verifies that some
important files/directories in the codebase have code-owners assigned in
`.github/CODEOWNERS`.
The main purpose of this change is to prevent adding new directories
(e.g. packages or docs guides/examples) without assigning appropriate
code-owners. When no code-owner is explicitly assigned, corresponding
PRs will automatically request reviews from @igorminar, who is the
"fall-back" code-owner.
PR Close#32577
Updates the SHA that will be tested against in the `material-unit-tests` job
to the latest commit in the components repository. SHA 2817c9e2faa4140342336987a692d5dd30bf24c2
is needed in order to make the `material-unit-tests` job pass after the remove
of the `protractor_web_test_suite` bazel rule from @angular/bazel. `protractor_web_test_suite` is
now provided by the @bazel/protractor npm package.
PR Close#32485
The commit range that is associated with a CI build is used for a couple
of things (mostly related to payload-size tracking):
- Determine whether a size change was caused by application code or
dependencies (or both).
- Add the messages of the commits associated with the build (and thus
the payload-size change).
NOTE: The commit range is only used on push builds.
Previously, the commit range was computed based on the
`CIRCLE_COMPARE_URL` environment variable. With [CircleCI Pipelines][1]
enabled, `CIRCLE_COMPARE_URL` is no longer available and the commit
range cannot be reliably detected.
This commit switches `CI_COMMIT_RANGE` to only include the last commit.
This can be less accurate in some rare cases, but is true in the
majority of cases (on push builds). Additionally, it stores the CircleCI
build URL in the database along with the payload data, so the relevant
info can be retrieved when needed.
[1]: https://circleci.com/docs/2.0/build-processing
PR Close#32537
The docs examples e2e tests have been quite flaky recently. This causes
the `test_docs_examples` and `test_docs_examples_ivy` CircleCI jobs to
often fail (and block PRs) without a real reason.
This commit adds support for re-running failed docs examples e2e tests
and configures the `test_docs_examples` and `test_docs_examples_ivy`
jobs to try running each test that fails a second time, before giving up
and marking it as failed.
Closes#31841Closes#31842
PR Close#32497
These were initally added to allow for CircleCI to provide a better failure UI using junit data.
This information is not currently being created for bazel tests and once it is created it will
be available on the cloud status pages created by the BEP for each bazel execution.
PR Close#32292
Updates the SHA that will be tested against in the `material-unit-tests` job
to the latest commit in the components repository. SHA 18b9ef3f5529f0fa8f034944681486447af7b879
is needed in order to make the newly introduced material-ci test blocklist effective.
PR Close#32243
We don't need to build this branch as it's informative for the purposes of figuring out
the diff between the master and what's synced into google3.
PR Close#32202
Updates the `material-unit-tests` job to the latest commit
on the components repository. 097f4335a4e0b6e6b579829ae3a9cffce6292d2b.
This commit ensures that the postinstall script does not run NGC
on schematic code from `@angular/core`. Running NGC on the
generated schematic code can cause unexpected issues as some
migrations import types directly from `@angular/compiler-cli`
while the entry-point is not usable in all cases.
See: https://github.com/angular/angular/issues/29220.
PR Close#31650
The `setup-local` npm script uses `NgPackagesInstaller` to replace the
Angular packages with the locally built ones. Previously, it would (a)
assume that the packages were built and (b) it would do anything if the
currently installed versions already correspond to locally built
packages (even if not the latest version).
This could lead to all sorts of errors, such as:
- Confusing error messages, `dist/packages-dist/` was missing.
- Using outdated build artifacts from `dist/packages-dist/` without a
warning.
- Not installing the latest locally built packages, because the ones
installed already corresponded to locally built (but older) ones.
This commit fixes these issues by ensuring that:
- The local packages are always built before being used by
`NgPackagesInstaller`.
- The local packages are installed, even if the ones install already
correspond to local packages.
NOTE: Special `*-ci` scripts are introduced (for use on CI) that skip
building the local packages, since that step would have been taken
care of (in a more efficient way) in a previous CI step.
PR Close#31985
No longer locks the Material unit tests job to a specific branch, but rather allows
locking to a specific commit from a given branch. This allows us to use the
"master" branch from the `components` repository.
PR Close#31569
Previously, the ivy-2019 branch of the Material (aka components) repo was
used, which contains some changes that were necessary to work with Ivy.
These changes are not longer necessary, as Material's master branch is
fully working with Ivy today. To be up-to-date with recent Material
development and its support for more recent dependencies, e.g. TypeScript,
it is desirable for us to be on a newer version of Material.
This commit moves the Material tests away from the ivy-2019 branch, to a
recent commit on master. We are not targeting the master branch itself,
as that would introduce a moving target into Angular's CI checks, which
is undesirable.
Lastly, the usage of gulp to run Material's tests is changed into using
Bazel, as Material itself is now also built with Bazel.
PR Close#31569
Previously, the `test_saucelabs_bazel` job was run as part of the
`saucelabs_test` workflow every hour (for every "publish branch";
currently 8.0.x, 8.1.x and master).
Since this job runs a subset of the tests in
`legacy-unit-tests-saucelabs` (see [BUILD.bazel][1]) and is just a
proof-of-concept for running tests on SauceLabs via bazel, there is
little point in running is on all branches. It is also wasteful to run
it every hour, even if there were no changes pushed into the branch
since the last run.
This commit makes the job part of `default_workflow`, but limits it to
only be run on master builds (not on other branches or PRs). Based on
its recent history, the job is relatively stable and (since it will only
be run on master builds) it is not expected to affect our dev workflow.
[1]: https://github.com/angular/angular/blob/ef44f51d5/BUILD.bazel#L66-L92
PR Close#31636
Enables remote caching for CI jobs.
This configuration:
always reads from build cache on CI
only write to build cache for local builds for non-PR CI run
PR Close#31204
No longer uses docker in order to pull down the toolchain configs
for remote build execution. We don't need to make docker a prerequisite
for working on the Angular repository since we can leverage the checked-in
toolchain configurations from the `@bazel-toolchains` repository.
PR Close#31251
The publish_snapshots job is currently not able to decode the Github
token because the openssl version changed. This is because the default
digest for more recent openssl version has been updated and the github
token file has been encrypted with an old digest. We need to ensure
that the md5 digest is used for decryption as that matches the
digest used for encryption.
PR Close#31099
Updates the NodeJS version to the latest stable version at the time of
writing (v10.16.0). We need to update our image to use a minimum NodeJS
version of v10.15.0 because new CLI apps automatically install a non-locked
version of selenium-webdriver that now requires NodeJS >= 10.15.0 since the
latest release of 17th June 2019 (4.0.0-alpha.3).
See CI failures: https://circleci.com/gh/angular/angular/359077
PR Close#31088
Previously, we run the PWA score tests before unit/e2e tests, because
the latter would destroy the `dist/` directory required by the former.
Since cli@6, unit/e2e tests no longer detroy the `dist/` directory, so
it is now safe to run the unit/e2e tests first. This is preferrable,
since they are conceptually lower-level and any error messages (in case
of breakage) are more specific/actionable.
Related discussion about cli behavior:
- angular/angular-cli#4366
- angular/angular-cli#14701
PR Close#31047
After this PR is merged, maintainers no longer need to update .bazelrc
file, toolchain and platform related flags for RBE builds and tests
(unless there is a breaking change in Bazel related to those flags).
Maintainers just need to update the pin of @bazel-toolchains repo
regularly in the packages/bazel/package.bzl file according to
https://releases.bazel.build/bazel-toolchains.html to include the
latest checked-in toolchain configs. If rbe_autoconfig() cannot find
appropriate toolchain configs for the version of Bazel in the version of
@bazel_toolchains repo that is currently used by this project, it will pull
down the container and generate the configs on the fly as the beginning
of the build/test.
PR Close#29336
The `aio_monitoring_next` CircleCI job was disabled due to a failure in
[302254](https://circleci.com/gh/angular/angular/302254). It turned out
the failure was caused because the job happened to run after a change
had been merged into master and right before it was deployed to
https://next.angular.io/ causing the tests not to match the deployed
version.
This commit re-enables the job and moves it to a different time, when it
is less likely that PRs will be being merged (and thus reducing the risk
of a similar timming issue).
Fixes#30101
PR Close#30168
Previously, the `aio_monitoring_stable` job (which runs tests against
https://angular.io/) was using the tests from the master branch. As a
result, if the master branch included changes in those tests that were
not yet backported to the stable branch (and thus deployed to
https://angular.io/), the tests would fail.
This commit fixes this by using the tests from the stable branch to test
against https://angular.io/.
Fixes#30101
PR Close#30110
Previously, the `aio_monitoring` job was testing both the stable
(https://angular.io/) and the @next (https://next.angular.io/) versions.
This commit splits the tests into two separate jobs (still run as part
of the same workflow). This speeds up the tests (since the two jobs can
now run in parallel) and makes it easier to isolate failures (e.g.
identify which branch is failing, disable one of the two, etc.).
(Credits to @petebacondarwin 😉)
PR Close#30110
The job started failing for https://angular.io/, due to changes in tests
that only affected https://next.angular.io/, and was disabled in #30102.
This commit re-enables the job (since it does not block anything and it
will be fixed in a subsequent commit).
PR Close#30110
Redirects that were updated in 24c61cb63e break the aio_monitoring CircleCI job, since we run the tests against the production angular.io site (that doesn't have the latest redirects config yet).
This change temporary disables the aio_monitoring job to avoid failures for other PRs. The problem will be resolved and the job will be enabled in followup PRs.
PR Close#30102
We recently added the "uname -a" command to the CircleCI
integration test in order to identify Linux kernels that
broke Chrome sandboxing.
Since this issue seems to be claimed as fixed by the CircleCI
support and we didn't see any sandboxing issues the last month,
we are removing the debugging command we added.
PR Close#30006
To better test ngcc (in addition to Ivy) on angular.io, change the
`test_aio_local_ivy` CircleCI job to use the pre-ivy Angular packages
(and have ngcc transform them to Ivy ones).
PR Close#29989
The server used for testing on localhost has less optimizations (e.g.
serves uncompressed files), so we need to wait longer the ServiceWorker
to be loaded and registered to allow Lighthouse to reliably detect it,
especially on slower environments (e.g. CI).
Related: https://github.com/GoogleChrome/lighthouse/issues/5527#issuecomment-483710849Fixes#29910
PR Close#29953
The PWA score tests have been occasionally failing on CI recently
(possibly due to CI VM/network issues).
This commit temporarily disables them, until we investigate the
root-cause and/or put a work-around in place.
The PWA score tests are still run against the deployed versions (which
don't suffer as much) or PRs with public previews (as part of the
`test_aio_preview` job) and on upstream builds (as part of the
`deploy_aio` job).
Related to #29910.
[1]: https://github.com/angular/angular/blob/3a836c362/.circleci/config.yml#L390
PR Close#29911
Run all targets with RBE config. Previously we filtered out one target, //tools/ts-api-guardian:tests, and ran that with a different bazelrc
PR Close#29731
Currently we cache the Material `node_modules` after
the `run_angular_material_unit_tests.sh` completed. This
means that the cache will incorrectly contain the Ivy NPM
package output which might be incompatible with the
other Material dependencies. e.g. the Material postinstall
command now uses a different NGC version that does not
work with the `typescript` version that has been specified in
the Material project.
PR Close#29416
The CircleCI team needs to know what causes the Kernel
inconsistency that most likely causes our no usable sandbox
errors. Therefore we add "uname -r"
PR Close#29309
Recently we moved the Saucelabs job into a cronjob in order to avoid
heavy flakiness that we experienced due to a Saucelabs connect bug
that has been supposedly fixed by the Saucelabs team (no new version
is released yet though).
Our initial assumption was that we very rarely hit specific browser failures
and can therefore move the Saucelabs tests into a cronjob, but after some
days of having the cronjob, we realized that we actually hit browser-specific
failures quite often and that we should run the tests for every PR (like before)
PR Close#29255
Currently the "test_docs_examples_ivy" job attaches
the legacy package output, while we can also attach
the Ivy NPM package output. We don't need Ngcc to downlevel
the Angular packages in order to build AIO with Ivy.
PR Close#29117
Currently the `test_saucelabs` job does not use our general
CircleCI bazel configuration. We should set this configuration
up, as it enables better logging, better use of the `xlarge`
resource class, and also sets up Bazel's integrated flakiness
retry functionality.
PR Close#29106
Currently when `sauce-connect` times out after 2min, we just
print a message saying that the SauceLabs tunnel didn't establish
within 2min. In order to make debugging easier, we now print the
full log file output on failure.
PR Close#29084
Currently the docs example tests (`test_docs_examples_ivy`
and `test_docs_examples`) are the culprits for a slow-down
in our overall CI turnaround. We need to increase parallelism
in order to make our CI turnaround more _acceptable_. This is
temporary and the long-term goal is to move these tests to Bazel
with remote build execution.
References #28940
PR Close#28984
Currently the "test_docs_examples_ivy" job attaches
the legacy package output, while we can also attach
the Ivy NPM package output. We don't need Ngcc to downlevel
the Angular packages in order to run the docs examples with Ivy.
PR Close#28984
Initially when we introduced the cronjob for Saucelabs,
we specified that the tests should run every 4h. Since the
caretaker needs more recent results when merging PRs
or before creating a release, we should run the saucelabs
tests every hour. This still ensures that PRs are not
affected by Saucelabs flakiness or incidents, and
the caretaker can also react better to real browser
failures (and isn't blocked on a 4h time frame)
PR Close#28903
Previously, our yarn (which overwrote the pre-installed yarn on the
docker image) was only available through `$BASH_ENV` (as an exported
function). This caused it to be undefined for commands executed in other
shells (e.g. via Node.js' `child_process.spawn()` unless explicitly
configuring it to run with `bash`).
This commit fixes this by making our yarn version available globally via
a symlink (`/usr/local/bin/yarn`).
(This was accidentally broken in #28839.)
PR Close#28889
We no longer want to run Saucelabs for every PR/commit because
Saucelabs has been very flaky recently and it blocks most of the
PRs with a flaky failing state that we cannot fix most of the time due
to upstream Saucelabs failures/incidents. Since real browsers tests
rarely catch browser-specific failures (same as in Material), we should
only run Saucelabs in a cronjob on the upstream branches. This still
ensures/guarantees our browser compatibility, but makes our CI
more stable and the PR workflow more productive.
PR Close#28787
Since all unit tests are now run with Bazel, we can remove
the local legacy unit tests job. We still need to keep the
Saucelabs legacy job until we can run all of these web
unit tests with Saucelabs and Bazel.
PR Close#28703
As discussed in https://github.com/angular/angular/pull/28546#discussion_r254068014, we want to combine the
`define_env_vars` and `download_yarn` anchor since downloading Yarn depends on setting up the
environment variables. In addition this simplifies our setup and reduces code-duplication.
PR Close#28788
Previously, in order for the `aio_monitoring` failure notifications to
work, the steps up to `define_env_vars` should have succeeded. This
meant that any failures in earlier steps would not send notifications.
This commit fixes it by making the notification step independent of the
`define_env_vars` step.
PR Close#28555
In most cases, it doesn't make a difference, because the cache does
already exist and is not saved. In the few cases where the dependencies
change (and the cache needs to be updated), it makes more sense to save
the cache in the `build-npm-packages` job, because most jobs depend on
it and thus will be able to take advantage of the updated cache right
away.
This seems to be an oversight in b26ac1c22.
PR Close#28555
Currently our version of Yarn is installed through
the "circleci/node" docker image. This is problematic
because in order to be able to update Yarn, we always
need to update the docker image to a version that
comes with the desired Yarn version. Sometimes there
is no docker image with the desired latest Yarn version,
and therefore we cannot easily update the Yarn version.
Additionally updating the docker image also means that
we need to update our version of NodeJS, as well as the
version of `openssl` might have changed (meaning that
our encrypted credential files may not be decodable with
the new version of `openssl`)
PR Close#28546
Occasionally, yarn's requests take more than 10 minutes to
complete/fail, by which time CircleCI jobs due to no output.
This commit works around the issue by periodically printing something to
stdout.
PR Close#28458
Previously all Bazel repositories were cached on CircleCI
because the `experimental_repository_cache` flag has been
specified and the given repository cache directory has been
included in the CircleCI cache storage.
The directory is currently still included in the CircleCI
cache storage, but the `--repository_cache` flag is no longer
specified, and the cache directory is basically empty all the
time. The flag seems to have been removed accidentally within
SHA c8b70ae8e4.
We should specifiy this flag on the CI again, so that Bazel
doesn't need to install the Bazel managed node modules
all the time. This would slow down analysis phase on CI; and also
makes us dependent on the Yarn/NPM registry which often times out
if we fetch a lot of dependencies.
Also in order to make sure that cached Bazel repositories are
also most of the time in sync with what's currently defined in
the workspace, we need to update the cache key.
PR Close#28515
Currently whenever someone creates a pull request, the NPM dependencies
are downloaded and installed. This is problematic because we have a lot
NPM dependencies with potentially large files that would need to be
downloaded (e.g. the Bazel binaries).
The caches are currently not being restored because we added the
`{Branch}` variable to the CircleCI cache key. Since every PR has a different
branch name (e.g. `devversion/refs/heads/my-banch`), the cache keys would
never match an existing cache key, and the PR would start fresh by
downloading everything.
We can safely remove the `{Branch}` variable from the cache key because
it does not provide any value since the cached files are based on the state
of the `yarn.lock` file and not based on the current branch name. This reduces
our dependency on the slow and sometimes **flaky** Yarn registry. We should
try to depend as few as possible on external services (e.g. see how Saucelabs
flakiness can cause trouble for the caretaker; same applies to flaky Yarn installs)
PR Close#28480
By default, `webdriver-manager update` will download the latest
ChromeDriver version, which might not be compatible with the Chrome
version included in the [docker image used on CI], causing CI failures.
Previously, we used to pin the ChromeDriver version on CI in
[ngcontainer's Dockerfile][2]. This was accidentally broken in #26691,
while moving from ngcontainer to default CircleCI docker images.
This commit fixes the issue by pinning ChromeDriver to a known
compatible version.
[1]: bfd48d156d/.circleci/config.yml (L16)
[2]: bfd48d156d/tools/ngcontainer/Dockerfile (L63)
PR Close#28494
* No longer builds the example e2e tests using "tsc". The examples are now built with Bazel and can therefore be built with Ivy by using the `--define=compile=aot` switch.
* No longer runs the example e2e tests using the protractor CLI. example e2e tests are executed with the Bazel protractor rule and can therefore run incrementally.
NOTE: Unit tests found within the examples are still running within the legacy jobs.
PR Close#28402
On push builds, CircleCI provides `CIRCLE_COMPARE_URL`, which we use to
extract the commit range for a given build. When a workflow is rerun
(e.g. to recover from a flaked job), `CIRCLE_COMPARE_URL` is not
defined, causing some jobs to fail.
This commit fixes it by retrieving the compare URL from the original
workflow. It uses a slow process involving a (potentially large) number
of requests to CircleCI API.
It depends on the (undocumented) fact, that the `workspace_id` is the
same on all rerun workflows and the same as the original `workflow_id`.
PR Close#27775
* Groups the two sharded `test_docs_examples` job using CircleCI's `parallelism` feature. This makes the amount of jobs that show up on a PR, more reduced and also reduces code duplication for maintaining the Circle job definition.
PR Close#27937
Moving the tests over to CircleCI in pretty much "as-is" state just so that we can drop the dependency on Travis.
In the followup changes we plan to migrate these tests to run on sauce under bazel. @gregmagolan is working on that.
I've previously verified that all the tests executed in legacy-unit-tests-local already under bazel.
Therefore the legacy-unit-tests-local job is strictly not necessary any more, but given how flaky legacy-unit-tests-saucelabs is,
it is good to have the -local job just so that we can quickly determine if any failure is a flake or legit issue
(the bazel version of these tests could theoretically run in a slightly different way and fail or not fail in a different way, so having -lcoal job is just an extra safety check).
This change was coauthored with @devversion
PR Close#27937
Switch from Skylint to buildifier --lint - this is required for the Bazel 0.20 upgrade since Bazel no longer lets us use the embedded JDK to build and run Java programs, and Skylint is a Java program
PR Close#27489
With this change, we no longer depend on CircleCI to trigger the webhook
(which it sometimes does with considerable delay or not at all).
This has the added benefit that other jobs will not unnecessarily
trigger webhooks and spam the preview server logs. It is only the
`aio_preview` job's webhook that we care about.
Related to #27352.
PR Close#27458
Currently the Github robot is not able to measure the artifacts of the `hello_world` and `todo` bundling tests because those will be only built with the `ivy-only` rule tag. This means that the current CircleCI job that is supposed to upload the size artifacts, does not even build those bundles.
PR Close#27042
Since 8fc4ae51f, the jobs that need Xvfb use `*-browser` CircleCI docker
image flavors (e.g. `circleci/node:10.12-browsers`), which automatically
start Xvfb.
PR Close#26869
* No longer depends on a custom CircleCI docker image that comes with Bazel pre-installed. Since Bazel is now available through NPM, we should be able to use the version from `@bazel/bazel` in order to enforce a consistent environment on CI and locally.
* This also reduces the amount of packages that need to be published (ngcontainer is removed)
PR Close#26691
Greg Magolan
JiaLiPassion
Joey Perrott
Paul Gschwendtner
George Kalpakas
Igor Minar
Matias Niemelä
Filipe Silva
Kara Erickson
JoostK
Alex Eagle
Xin Gao
Andrew Kushnir
Alex Eagle
Brandon
Jeremy Elbourn
Misko Hevery