Prior to this commit, the `packages/core/src/render3/interfaces/query.ts` file used to import `QueryList` using `../../linker`, which contains a lot of re-exports and as a result, this one import caused a lot of circular deps cycles reported by the tool that checks such deps. In other places in the code the `QueryList` is imported using more narrow import (`linker/query_list`), so this commit uses the same pattern. This change allowed to reduce the number of known cycles from 343 to 207, the golden file was updated accordingly.
PR Close#36286
Previously we only searched for package paths below the set of `basePaths`
that were computed from the `basePath` provided to ngcc and the set of
`pathMappings`.
In some scenarios, such as hoisted packages, the entry-point is not within
any of the `basePaths` identified above. For example:
```
project
packages
app
node_modules
app-lib (depends on lib1)
node_modules
lib1 (depends on lib2)
node_modules
lib2 (depends on lib3/entry-point)
lib3
entry-point
```
When CLI is compiling `app-lib` ngcc will be given
`project/packages/app/node_modules` as the `basePath.
If ngcc is asked to target `lib2`, the `targetPath` will be
`project/node_modules/lib1/node_modules/lib2`.
Since `lib2` depends upon `lib3/entry-point`, ngcc will need to compute
the package path for `project/node_modules/lib3/entry-point`.
Since `project/node_modules/lib3/entry-point` is not contained in the `basePath`
`project/packages/app/node_modules`, ngcc failed to compute the `packagePath`
correctly, instead assuming that it was the same as the entry-point path.
Now we also consider the nearest `node_modules` folder to the entry-point
path as an additional `basePath`. If one is found then we use the first
directory directly below that `node_modules` directory as the package path.
In the case of our example this extra `basePath` would be `project/node_modules`
which allows us to compute the `packagePath` of `project/node_modules/lib3`.
Fixes#35747
PR Close#36249
Prior to this commit, Ivy TestBed was accessing locale ID before `APP_INITIALIZER` functions were called. This execution order is not consistent with the app bootstrap logic in `application_ref.ts`. This commit updates Ivy TestBed execution order to call initializers first (since they might affect `LOCALE_ID` token value) and accessing and setting locale ID after that.
Fixes#36230.
PR Close#36237
Currently the `ts-circular-deps` tool uses a hard-coded module resolver
that only works in the `angular/angular` repository.
If the tool is consumed in other repositories through the shared
dev-infra package, the module resolution won't work, and a few
resolvable imports (usually cross-entry-points) are accidentally
skipped. For each test, the resolution might differ, so tests can
now configure their module resolution in a configuration file.
Note that we intentionally don't rely on tsconfig's for module
resolution as parsing their mappings rather complicates the
circular dependency tool. Additionally, not every test has a
corresponding tsconfig file.
Also, hard-coding mappings to `@angular/*` while accepting a
path to the packages folder would work, but it would mean
that the circular deps tool is no longer self-contained. Rather,
and also for better flexibility, a custom resolver should be
specified.
PR Close#36226
Previously, some of the built-in ServiceWorker registration strategies,
namely `registerWithDelay:<timeout>` and `registerWhenStable:<timeout>`,
would register potentially long-running timeout, thus preventing the app
from stabilizing before the timeouts expired. This was especially
problematic for the `registerWhenStable:<timeout>` strategy, which waits
for the app to stabilize, because the strategy itself would prevent the
app from stabilizing and thus the ServiceWorker would always be
registered after the timeout.
This commit fixes this by subscribing to the registration strategy
observable outside the Angular zone, thus not affecting the app's
stabilization.
PR Close#35870
Previously, when using the default ServiceWorker registration strategy
Angular would wait indefinitely for the [app to stabilize][1], before
registering the ServiceWorker script. This could lead to a situation
where the ServiceWorker would never be registered when there was a
long-running task (such as an interval or recurring timeout).
Such tasks can often be started by a 3rd-party dependency (beyond the
developer's control or even without them realizing). In addition, this
situation is particularly hard to detect, because the ServiceWorker is
typically not used during development and on production builds a
previous ServiceWorker instance might be already active.
This commit fixes this by changing the default registration strategy
from `registerWhenStable` to `registerWhenStable:30000`, which will
ensure that the ServiceWorker will be registered after 30s at the
latest, even if the app has not stabilized by then.
Fixes#34464
PR Close#35870
Previously, when using the `registerWhenStable` ServiceWorker
registration strategy (which is also the default) Angular would wait
indefinitely for the [app to stabilize][1], before registering the
ServiceWorker script. This could lead to a situation where the
ServiceWorker would never be registered when there was a long-running
task (such as an interval or recurring timeout).
Such tasks can often be started by a 3rd-party dependency (beyond the
developer's control or even without them realizing). In addition, this
situation is particularly hard to detect, because the ServiceWorker is
typically not used during development and on production builds a
previous ServiceWorker instance might be already active.
This commit enhances the `registerWhenStable` registration strategy by
adding support for an optional `<timeout>` argument, which guarantees
that the ServiceWorker will be registered when the timeout expires, even
if the app has not stabilized yet.
For example, with `registerWhenStable:5000` the ServiceWorker will be
registered as soon as the app stabilizes or after 5 seconds if the app
has not stabilized by then.
Related to #34464.
[1]: https://angular.io/api/core/ApplicationRef#is-stable-examples
PR Close#35870
`KeyValuePipe` currently accepts `null` values as well as `Map`s and a
few others. However, due to the way in which TS overloads work, a type
of `T|null` will not be accepted by `KeyValuePipe`'s signatures, even
though both `T` and `null` individually would be.
To make this work, each signature that accepts some type `T` has been
duplicated with a second one below it that accepts a `T|null` and
includes `null` in its return type.
Fixes#35743
PR Close#36093
Previously ngcc never preserved whitespaces but this is at odds
with how the ViewEngine compiler works. In ViewEngine, library
templates are recompiled with the current application's tsconfig
settings, which meant that whitespace preservation could be set
in the application tsconfig file.
This commit allows ngcc to use the `preserveWhitespaces` setting
from tsconfig when compiling library templates. One should be aware
that this disallows different projects with different tsconfig settings
to share the same node_modules folder, with regard to whitespace
preservation. But this is already the case in the current ngcc since
this configuration is hard coded right now.
Fixes#35871
PR Close#36189
This commit augments the `FactoryDef` declaration of Angular decorated
classes to contain information about the parameter decorators used in
the constructor. If no constructor is present, or none of the parameters
have any Angular decorators, then this will be represented using the
`null` type. Otherwise, a tuple type is used where the entry at index `i`
corresponds with parameter `i`. Each tuple entry can be one of two types:
1. If the associated parameter does not have any Angular decorators,
the tuple entry will be the `null` type.
2. Otherwise, a type literal is used that may declare at least one of
the following properties:
- "attribute": if `@Attribute` is present. The injected attribute's
name is used as string literal type, or the `unknown` type if the
attribute name is not a string literal.
- "self": if `@Self` is present, always of type `true`.
- "skipSelf": if `@SkipSelf` is present, always of type `true`.
- "host": if `@Host` is present, always of type `true`.
- "optional": if `@Optional` is present, always of type `true`.
A property is only present if the corresponding decorator is used.
Note that the `@Inject` decorator is currently not included, as it's
non-trivial to properly convert the token's value expression to a
type that is valid in a declaration file.
Additionally, the `ComponentDefWithMeta` declaration that is created for
Angular components has been extended to include all selectors on
`ng-content` elements within the component's template.
This additional metadata is useful for tooling such as the Angular
Language Service, as it provides the ability to offer suggestions for
directives/components defined in libraries. At the moment, such
tooling extracts the necessary information from the _metadata.json_
manifest file as generated by ngc, however this metadata representation
is being replaced by the information emitted into the declaration files.
Resolves FW-1870
PR Close#35695
Previously, when an input property was initially set to `undefined` it
would not be correctly recognized as a change (and trigger
`ngOnChanges()`).
This commit ensures that explicitly setting an input to `undefined` is
correctly handled the same as setting the property to any other value.
This aligns the behavior of Angular custom elements with that of the
corresponding components when used directly (not as custom elements).
PR Close#36140
Previously, when an input property was set on an `NgElement` before
instantiating the underlying component, the `SimpleChange` object passed
to `ngOnChanges()` would have `firstChange` set to false, even if this
was the first change (as far as the component instance was concerned).
This commit fixes this by ensuring `SimpleChange#firstChange` is set to
true on first change, regardless if the property was set before or after
instantiating the component. This alignthe behavior of Angular custom
elements with that of the corresponding components when used directly
(not as custom elements).
Jira issue: [FW-2007](https://angular-team.atlassian.net/browse/FW-2007)
Fixes#36130
PR Close#36140
When computing the dependencies between packages which are not in
node_modules, we may need to rely upon path-mappings to find the path
to the imported entry-point.
This commit allows ngcc to use the path-mappings from a tsconfig
file to find dependencies. By default any tsconfig.json file in the directory
above the `basePath` is loaded but it is possible to use a path to a
specific file by providing the `tsConfigPath` property to mainNgcc,
or to turn off loading any tsconfig file by setting `tsConfigPath` to `null`.
At the command line this is controlled via the `--tsconfig` option.
Fixes#36119
PR Close#36180
I was not able to reproduce IE 10/11 failrue of the disabled
tests on SauceLabs any more. I did some cleanup of the test
in question but I doubt it was the root cause of the problem.
PR Close#35962
Previously, an expansion case could only start with an alpha numeric character.
This commit fixes this by allowing an expansion case to start with any character
except `}`.
The [ICU spec](http://userguide.icu-project.org/formatparse/messages) is pretty vague:
> Use a "select" argument to select sub-messages via a fixed set of keywords.
It does not specify what can be a "keyword" but from looking at the surrounding syntax it
appears that it can indeed be any string that does not contain a `}` character.
Closes#31586
PR Close#36123
This commit propagates the correct value span in an ExpressionBinding of
a microsyntax expression to ParsedProperty, which in turn porpagates the
span to the template ASTs (both VE and Ivy).
PR Close#36133
When using `platformBrowserDynamic().bootstrapModule()`, it is possible
to set `defaultEncapsulation` and `preserveWhitespaces` as default
configuration to influence how components are compiled. When compiling
components in JIT with Ivy, these options were not taken into account.
This commit publishes the options to be globally available, so that the
lazy compilation of JIT components has access to the configured
bootstrap options. Note that this approach does not allow changing the
options once they have been set, as Ivy's compilation model does not
allow for multiple compilations to exist at the same time.
For applications that bootstrap multiple modules, it is now required
to provide the exact same bootstrap options. An error is logged if
incompatible bootstrap options are provided, in which case the updated
options will be ignored.
Fixes#35230
Resolved FW-1838
PR Close#35534
When two entry-points overlap, ngcc may attempt to process some
files twice. Previously, when this occured ngcc would just exit with an
error preventing any other entry-points from being processed.
This commit changes ngcc so that if `errorOnFailedEntryPoint` is false, it will
simply log an error and continue to process entry-points. This is useful when
ngcc is processing the entire node_modules folder and there are some invalid
entry-points that the project doesn't actually use.
PR Close#36083
Previously, when an entry-point contained code that caused its compilation
to fail, ngcc would exit in the middle of processing, possibly leaving other
entry-points in a corrupt state.
This change adds a new `errorOnFailedEntryPoint` option to `mainNgcc` that
specifies whether ngcc should exit immediately or log an error and continue
processing other entry-points.
The default is `false` so that ngcc will not error but continue processing
as much as possible. This is useful in post-install hooks, and async CLI
integration, where we do not have as much control over which entry-points
should be processed.
The option is forced to true if the `targetEntryPointPath` is provided,
such as the sync integration with the CLI, since in that case it is targeting
an entry-point that will actually be used in the current project so we do want
ngcc to exit with an error at that point.
PR Close#36083
Later when we implement the ability to continue processing when tasks have
failed to compile, we will also need to avoid processing tasks that depend
upon the failed task.
This refactoring exposes this list of dependent tasks in a way that can be
used to skip processing of tasks that depend upon a failed task.
It also changes the blocking model of the parallel mode of operation so
that non-typings tasks are now blocked on their corresponding typings task.
Previously the non-typings tasks could be triggered to run in parallel to
the typings task, since they do not have a hard dependency on each other,
but this made it difficult to skip task correctly if the typings task failed,
since it was possible that a non-typings task was already in flight when
the typings task failed. The result of this is a small potential degradation
of performance in async parallel processing mode, in the rare cases that
there were not enough unblocked tasks to make use of all the available
workers.
PR Close#36083
Moving the definition of the `onTaskCompleted` callback into `mainNgcc()`
allows it to be configured based on options passed in there more easily.
This will be the case when we want to configure whether to log or throw
an error for tasks that failed to be processed successfully.
This commit also creates two new folders and moves the code around a bit
to make it easier to navigate the code§:
* `execution/tasks`: specific helpers such as task completion handlers
* `execution/tasks/queues`: the `TaskQueue` implementations and helpers
PR Close#36083
When ngcc is compiling an entry-point, it uses a `ReflectionHost` that
is specific to its format, e.g. ES2015, ES5, UMD or CommonJS. During the
compilation of that entry-point however, the reflector may be used to
reflect into external libraries using their declaration files.
Up until now this was achieved by letting all `ReflectionHost` classes
consider their parent class for reflector queries, thereby ending up in
the `TypeScriptReflectionHost` that is a common base class for all
reflector hosts. This approach has proven to be prone to bugs, as
failing to call into the base class would cause incompatibilities with
reading from declaration files.
The observation can be made that there's only two distinct kinds of
reflection host queries:
1. the reflector query is about code that is part of the entry-point
that is being compiled, or
2. the reflector query is for an external library that the entry-point
depends on, in which case the information is reflected
from the declaration files.
The `ReflectionHost` that was chosen for the entry-point should serve
only reflector queries for the first case, whereas a regular
`TypeScriptReflectionHost` should be used for the second case. This
avoids the problem where a format-specific `ReflectionHost` fails to
handle the second case correctly, as it isn't even considered for such
reflector queries.
This commit introduces a `ReflectionHost` that delegates to the
`TypeScriptReflectionHost` for AST nodes within declaration files,
otherwise delegating to the format-specific `ReflectionHost`.
Fixes#35078
Resolves FW-1859
PR Close#36089
The format property for ES5 bundles should be "module" or "es5"/"esm5",
but was "main" instead. The "main" property is appropriate for CommonJS
and UMD bundles, not for ES5 bundles.
PR Close#36089
Currently, when Angular code is built with Bazel and with Ivy, generated
factory shims (.ngfactory files) are not processed via the majority of
tsickle's transforms. This is a subtle effect of the build infrastructure,
but it boils down to a TsickleHost method `shouldSkipTsickleProcessing`.
For ngc_wrapped builds (Bazel + Angular), this method is defined in the
`@bazel/typescript` (aka bazel rules_typescript) implementation of
`CompilerHost`. The default behavior is to skip tsickle processing for files
which are not present in the original `srcs[]` of the build rule. In
Angular's case, this includes all generated shim files.
For View Engine factories this is probably desirable as they're quite
complex and they've never been tested with tsickle. Ivy factories however
are smaller and very straightforward, and it makes sense to treat them like
any other output.
This commit adjusts two independent implementations of
`shouldSkipTsickleProcessing` to enable transformation of Ivy shims:
* in `@angular/bazel` aka ngc_wrapped, the upstream `@bazel/typescript`
`CompilerHost` is patched to treat .ngfactory files the same as their
original source file, with respect to tsickle processing.
It is currently not possible to test this change as we don't have any test
that inspects tsickle output with bazel. It will be extensively tested in
g3.
* in `ngc`, Angular's own implementation is adjusted to allow for the
processing of shims when compiling with Ivy. This enables a unit test to
be written to validate the correct behavior of tsickle when given a host
that's appropriately configured to process factory shims.
For ngtsc-as-a-plugin, a similar fix will need to be submitted upstream in
tsc_wrapped.
PR Close#35848
PR Close#35975
Updates to the latest `@bazel/ibazel` version that properly
resolves local `@bazel/bazelisk` installations.
The support for this temporarily broke from `0.12.0` to `0.12.2`.
https://github.com/bazelbuild/bazel-watcher/issues/352.
PR Close#36097
This commit improves the context of a non-callable function error
message by providing the affected call target and its non-callable type.
PR Close#35271
This commit performs a few updates to internal functions that would be required in upcoming changes to support synthetic host bindings in Directives.
* the `elementPropertyInternal` function was refactored to accept renderer as an argument (prior to that, there was a function that loads the renderer in some specific way for animation bindings)
* `elementPropertyInternal`, `elementAttributeInternal` and `listenerInternal` functions were updated to have a fixed set of arguments (for better performance)
* `elementPropertyInternal` and `elementAttributeInternal` functions were updated to take `tNode` as an argument instead of passing node index (that was used to retrieve `tNode` internally), in some cases we already have `tNode` available or we can retrieve it from the state
The refactoring was triggered by the need to pass different renderers to the `elementPropertyInternal` to support synthetic host bindings in Directives (see this comment for additional context: https://github.com/angular/angular/pull/35568/files#r388034584).
PR Close#35884
This has a couple benefits:
- we now use a .bazelversion file rather than package.json to pin the version of bazel we want. This means even if you install bazel on your computer rather than via yarn, you'll still get a warning if your bazel version is wrong.
- you no longer end up downloading three copies of bazel due to bugs in both npm and yarn where they download all tarballs before checking the metadata to see which are usable on the local platform.
- bazelisk correctly handles the tools/bazel trick for wrapping functionality, which we want to use to instrument developer build latencies
PR Close#36078
This commit propagates the `sourceSpan` and `valueSpan` of a `VariableBinding`
in a microsyntax expression to `ParsedVariable`, and subsequently to
View Engine Variable AST and Ivy Variable AST.
Note that this commit does not propagate the `keySpan`, because it involves
significant changes to the template AST.
PR Close#36047
To create the symbols of a module, the static symbol resolver first gets
all the symbols loaded in the module by an export statement. For `export
* from './module'`-like statements, all symbols from `./module` must be
loaded. In cases where the exporting module is actually the same module
that the export statement is in, this causes an unbounded recursive
resolution of the same module.
Exports of the same module are not needed, as their symbols will be
resolved when the symbols in the module metadata's `metadata` key is
explored.
This commit resolves the unbounded recursion by loading exporting
modules only if they differ from the module currently being resolved.
Closes https://github.com/angular/vscode-ng-language-service/issues/593
PR Close#35262
Prior to this commit, Ivy compiler didn't handle directive inputs with interpolations located on `<ng-template>` elements (e.g. `<ng-template dir="{{ field }}">`). That was the case for regular inputs as well as inputs that should be processed via i18n subsystem (e.g. `<ng-template i18n-dir dir="Hello {{ name }}">`). This commit adds support for such expressions for explicit `<ng-template>`s as well as a number of tests to confirm the behavior.
Fixes#35752.
PR Close#35984
Close#31687, #31684
Zone.js patches rxjs internal `_subscribe` and `_unsubscribe` methods, but zone.js doesn't do null check, so in some operator such as `retryWhen`, the `_unsubscribe` will be set to null, and will cause
zone patched version throw error.
In this PR, if `_subscribe` and `_unsubscribe` is null, will not do the patch.
PR Close#35990
`zone.js` added `removeAllListeners` and `eventListeners` methods in `EventTarget.prototype`, but those methods only exists when user import `zone.js` and also enables `EventTarget` monkey patching.
If user:
1. Does not import `zone.js` and uses `noop` zone when bootstrapping Angular app. OR
2. Disable monkey patching of `EventTarget` patch by defining `__Zone_disable_EventTarget = true`.
Then `removeAllListeners` and `eventListeners` methods will not be present.
PR Close#35954
Close#27840.
By default, `zone.js` wrap uncaught promise error and wrap it to a new Error object with some
additional information includes the value of the error and the stack trace.
Consider the following example:
```
Zone.current
.fork({
name: 'promise-error',
onHandleError: (delegate: ZoneDelegate, current: Zone, target: Zone, error: any): boolean => {
console.log('caught an error', error);
delegate.handleError(target, error);
return false;
}
}).run(() => {
const originalError = new Error('testError');
Promise.reject(originalError);
});
```
The `promise-error` zone catches a wrapped `Error` object whose `rejection` property equals
to the original error, and the message will be `Uncaught (in promise): testError....`,
You can disable this wrapping behavior by defining a global configuraiton
`__zone_symbol__DISABLE_WRAPPING_UNCAUGHT_PROMISE_REJECTION = true;` before importing `zone.js`.
PR Close#35873
Monkey patch `MessagePort.prototype.onmessage` and `MessagePort.prototype.onmessageerror` to make
these properties's value(callback function) run in the zone when these value are set.
PR Close#34610
Previously, calculations related to the position of and difference between
SegmentMarkers required extensive computation based around the line,
line start positions and columns of each segment.
PR Close#36027
The merging algorithm needs to find, for a given segment, what the next
segment in the source file is. This change modifies the `generatedSegment`
properties in the mappings so that they have a link directly to the following
segment.
PR Close#36027
By computing and caching the start of each line, rather than the length
of each line, we can save a lot of duplicated computation in the `segmentDiff()`
and `offsetSegment()` functions.
PR Close#36027
Previously the list of original segments that was searched for incoming
mappings did not differentiate between different original source files.
Now there is a separate array of segments to search for each of the
original source files.
PR Close#36027
The `@angular/core` package has a large number of source files
and mappings which exposed performance issues in the new source-map
flattening algorithm.
This change uses a binary search (rather than linear) when finding
matching mappings to merge. Initial measurements indicate that this
reduces processing time for `@angular/core` by about 50%.
PR Close#36027
Prior to this commit, i18n runtime logic relied on the assumption that provided translation is syntactically correct, specifically around ICU syntax. However provided translations might contain some errors that lead to parsing failure. Specifically when translation contains curly braces, runtime i18n logic tries to parse them as an ICU expression and fails. This commit validates ICU parsing result (making sure it was parsed correctly) and throws an error if parsing error happens. The error that is thrown also contains translated message text for easier debugging.
Note: the check and the error message introduced in this PR is a safeguard against the problem that led to unhandled i18n runtime logic crash. So the framework behavior remains the same, we just improve the error message and it should be safe to merge to the patch branch.
Resolves#35689.
PR Close#35923
ts-api-guardian uses `require.resolve` to resolve the actual and golden files under bazel. In Windows for these files to be resolved correct the full path including the workspace name as per the MANIFEST entries is required.
This used to be the case until the recent changes done to use npm_integration tests
83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L19)83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L28)
```
bazel test //packages/... --test_tag_filters=api_guard
//packages/animations:animations_api (cached) PASSED in 18.4s
//packages/common:common_api (cached) PASSED in 25.5s
//packages/compiler-cli:compiler_options_api (cached) PASSED in 12.4s
//packages/compiler-cli:error_code_api (cached) PASSED in 11.6s
//packages/core:core_api (cached) PASSED in 20.6s
//packages/core:ng_global_utils_api (cached) PASSED in 13.5s
//packages/elements:elements_api (cached) PASSED in 11.9s
//packages/forms:forms_api (cached) PASSED in 13.9s
//packages/http:http_api (cached) PASSED in 14.8s
//packages/localize:localize_api (cached) PASSED in 6.3s
//packages/platform-browser:platform-browser_api (cached) PASSED in 18.1s
//packages/platform-browser-dynamic:platform-browser-dynamic_api (cached) PASSED in 14.0s
//packages/platform-server:platform-server_api (cached) PASSED in 13.9s
//packages/platform-webworker:platform-webworker_api (cached) PASSED in 13.7s
//packages/platform-webworker-dynamic:platform-webworker-dynamic_api (cached) PASSED in 11.7s
//packages/router:router_api (cached) PASSED in 19.9s
//packages/service-worker:service-worker_api (cached) PASSED in 18.1s
//packages/upgrade:upgrade_api (cached) PASSED in 13.5s
```
Reference: DEV-71
PR Close#36034
Close#35878.
Before zone.js 0.10, the rollup config would refer to `rxjs` when bundling `zone-patch-rxjs.js`
From zone.js 0.10, we started to use bazel to build `zone-patch-rxjs.js` and the configuration was wrongly defined to include a copy of `rxjs` in the `zone-patch-rxjs.js`.
PR Close#35983
In some scenarios it is useful for the developer to indicate
to ngcc that it should not use the entry-point manifest
file, and instead write a new one.
In the ngcc command line tool, this option is set by specfying
```
--invalidate-entry-point-manifest
```
PR Close#35931
The `DirectoryWalkerEntryPointFinder` has to traverse the
entire node_modules library everytime it executes in order to
identify the entry-points that need to be processed. This is
very time consuming (several seconds for big projects on
Windows).
This commit changes the `DirectoryWalkerEntryPointFinder` to
use the `EntryPointManifest` to store the paths to entry-points
that were found when doing this initial node_modules traversal
in a file to be reused for subsequent calls.
This dramatically speeds up ngcc processing when it has been run once
already.
PR Close#35931
The new `EntryPointManifest` class can read and write a
manifest file that contains all the paths to the entry-points
that have been found in a node_modules folder.
This can be used to speed up finding entry-points in
subsequent runs.
The manifest file stores the ngcc version and hashes of
the package lock-file and project config, since if these
change the manifest will need to be recomputed.
PR Close#35931
Today, the language service infers the type of variables bound to the
"ngIf" template context member of an NgIf directive, but does not do the
same for the the "$implicit" context member. This commit adds support
for that.
Fixes https://github.com/angular/vscode-ng-language-service/issues/676
PR Close#35941
This commit adds fine-grained text spans to TemplateBinding for microsyntax expressions.
1. Source span
By convention, source span refers to the entire span of the binding,
including its key and value.
2. Key span
Span of the binding key, without any whitespace or keywords like `let`
The value span is captured by the value expression AST.
This is part of a series of PRs to fix source span mapping in microsyntax expression.
For more info, see the doc https://docs.google.com/document/d/1mEVF2pSSMSnOloqOPQTYNiAJO0XQxA1H0BZyESASOrE/edit?usp=sharing
PR Close#35897
95c729f5d1 added support for TypeScript v3.8. Since
these versions are now supported, the `typescript` peer dependency
range in `@angular/bazel` needs to be updated to not report unsatisfied
peer dependencies.
PR Close#36013
Currently, when running the ngcc binary directly and provide an invalid option ngcc will not error out and the user might have a hard time telling why ngcc is behaving not as expected.
With this change we now output an actionable error:
```
yarn ngcc --unknown-option
Options:
--version Show version number [boolean]
-s, --source A path (relative to the working directory)
of the `node_modules` folder to process.
[default: "./node_modules"]
-p, --properties An array of names of properties in
package.json to compile (e.g. `module` or
`es2015`)
Each of these properties should hold the
path to a bundle-format.
If provided, only the specified properties
are considered for processing.
If not provided, all the supported format
properties (e.g. fesm2015, fesm5, es2015,
esm2015, esm5, main, module) in the
package.json are considered. [array]
-t, --target A relative path (from the `source` path) to
a single entry-point to process (plus its
dependencies).
--first-only If specified then only the first matching
package.json property will be compiled.
[boolean]
--create-ivy-entry-points If specified then new `*_ivy_ngcc`
entry-points will be added to package.json
rather than modifying the ones in-place.
For this to work you need to have custom
resolution set up (e.g. in webpack) to look
for these new entry-points.
The Angular CLI does this already, so it is
safe to use this option if the project is
being built via the CLI. [boolean]
--legacy-message-ids Render `$localize` messages with legacy
format ids.
The default value is `true`. Only set this
to `false` if you do not want legacy
message ids to
be rendered. For example, if you are not
using legacy message ids in your
translation files
AND are not doing compile-time inlining of
translations, in which case the extra
message ids
would add unwanted size to the final source
bundle.
It is safe to leave this set to true if you
are doing compile-time inlining because the
extra
legacy message ids will all be stripped
during translation.
[boolean] [default: true]
--async Whether to compile asynchronously. This is
enabled by default as it allows
compilations to be parallelized.
Disabling asynchronous compilation may be
useful for debugging.
[boolean] [default: true]
-l, --loglevel The lowest severity logging message that
should be output.
[choices: "debug", "info", "warn", "error"]
--invalidate-entry-point-manifest If this is set then ngcc will not read an
entry-point manifest file from disk.
Instead it will walking the directory tree
as normal looking for entry-points, and
then write a new manifest file.
[boolean] [default: false]
--help Show help [boolean]
Unknown arguments: unknown-option, unknownOption
```
PR Close#36010
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
Pure pipes are not invoked again until their arguments are modified. The same
rule should apply to pure pipes that throw an exception. This fix ensures that
a pure pipe is not re-invoked if it throws an exception and arguments are not
changed.
PR Close#35827
This commit adds support in the Angular monorepo and in the Angular
compiler(s) for TypeScript 3.8. All packages can now compile with
TS 3.8.
For most of the repo, only a handful few typings adjustments were needed:
* TS 3.8 has a new `CustomElementConstructor` DOM type, which enforces a
zero-argument constructor. The `NgElementConstructor` type previously
declared a required `injector` argument despite the fact that its
implementation allowed `injector` to be optional. The interface type was
updated to reflect the optionality of the argument.
* Certain error messages were changed, and expectations in tests were
updated as a result.
* tsserver (part of language server) now returns performance information in
responses, so test expectations were changed to only assert on the actual
body content of responses.
For compiler-cli and schematics (which use the TypeScript AST) a major
breaking change was the introduction of the export form:
```typescript
export * as foo from 'bar';
```
This is a `ts.NamespaceExport`, and the `exportClause` of a
`ts.ExportDeclaration` can now take this type as well as `ts.NamedExports`.
This broke a lot of places where `exportClause` was assumed to be
`ts.NamedExports`.
For the most part these breakages were in cases where it is not necessary
to handle the new `ts.NamedExports` anyway. ngtsc's design uses the
`ts.TypeChecker` APIs to understand syntax and so automatically supports the
new form of exports.
The View Engine compiler on the other hand extracts TS structures into
metadata.json files, and that format was not designed for namespaced
exports. As a result it will take a nontrivial amount of work if we want to
support such exports in View Engine. For now, these new exports are not
accounted for in metadata.json, and so using them in "folded" Angular
expressions will result in errors (probably claiming that the referenced
exported namespace doesn't exist).
Care was taken to only use TS APIs which are present in 3.7/3.6, as Angular
needs to remain compatible with these for the time being.
This commit does not update angular.io.
PR Close#35864
Prior to this commit, while calculating the scope for a module, Ivy compiler processed `declarations` field first and `imports` after that. That results in a couple issues:
* for Pipes with the same `name` and present in `declarations` and in an imported module, Pipe from imported module was selected. In View Engine the logic is opposite: Pipes from `declarations` field receive higher priority.
* for Directives with the same selector and present in `declarations` and in an imported module, we first invoked the logic of a Directive from `declarations` field and after that - imported Directive logic. In View Engine, it was the opposite and the logic of a Directive from the `declarations` field was invoked last.
In order to align Ivy and View Engine behavior, this commit updates the logic in which we populate module scope: we first process all imports and after that handle `declarations` field. As a result, in Ivy both use-cases listed above work similar to View Engine.
Resolves#35502.
PR Close#35850
Fixes the following issues which caused the `elements` unit tests to break on IE:
1. `core.js` wasn't included which caused an error about `Promise` and `Symbol` to be thrown.
2. We were using a version of `@webcomponents/custom-elements` which was shipping ES6 code to npm. As a result, IE was throwing a syntax error.
PR Close#35940
This commit splits the ngtsc `core` package's api entrypoint, which
previously was a single `api.ts` file, into an api/ directory with multiple
files. This is done to isolate the parts of the API definitions pertaining
to the public-facing `angularCompilerOptions` field in tsconfig.json into a
single file, which will enable a public API guard test to be added in a
future commit.
PR Close#35885
`@angular/platform-browser/animations` has a dependency on `@angular/animations` however, this is not listed in `peerDependencies`
With this change we add this package as an optional peerDependency as it's only required when using the `@angular/platform-browser/animations` entrypoint.
Fixes#35888
PR Close#35949
This commit accomplishes two tasks:
- Fixes the span of queried pipes to only be applied on pipe names
- By consequence, fixes how pipes are located in arguments (previously,
pipes with arguments could not be found because the span of a pipe
uses a relative span, while the template position is absolute)
The screenshots attached to the PR for this commit demonstrate the
change.
Closes https://github.com/angular/vscode-ng-language-service/issues/677
PR Close#35986
Currently, when Angular code is built with Bazel and with Ivy, generated
factory shims (.ngfactory files) are not processed via the majority of
tsickle's transforms. This is a subtle effect of the build infrastructure,
but it boils down to a TsickleHost method `shouldSkipTsickleProcessing`.
For ngc_wrapped builds (Bazel + Angular), this method is defined in the
`@bazel/typescript` (aka bazel rules_typescript) implementation of
`CompilerHost`. The default behavior is to skip tsickle processing for files
which are not present in the original `srcs[]` of the build rule. In
Angular's case, this includes all generated shim files.
For View Engine factories this is probably desirable as they're quite
complex and they've never been tested with tsickle. Ivy factories however
are smaller and very straightforward, and it makes sense to treat them like
any other output.
This commit adjusts two independent implementations of
`shouldSkipTsickleProcessing` to enable transformation of Ivy shims:
* in `@angular/bazel` aka ngc_wrapped, the upstream `@bazel/typescript`
`CompilerHost` is patched to treat .ngfactory files the same as their
original source file, with respect to tsickle processing.
It is currently not possible to test this change as we don't have any test
that inspects tsickle output with bazel. It will be extensively tested in
g3.
* in `ngc`, Angular's own implementation is adjusted to allow for the
processing of shims when compiling with Ivy. This enables a unit test to
be written to validate the correct behavior of tsickle when given a host
that's appropriately configured to process factory shims.
For ngtsc-as-a-plugin, a similar fix will need to be submitted upstream in
tsc_wrapped.
PR Close#35848
XLIFF translation files can contain multiple `<file>` elements,
each of which contains translations. In ViewEngine all these
translations are merged into a single translation bundle.
Previously in Ivy only the translations from the last `<file>`
element were being loaded. Now all the translations from each
`<file>` are merged into a single translation bundle.
Fixes#35839
PR Close#35936
TemplateAst values are currently typed as the base class AST, but they
are actually constructed with ASTWithSource. Type them as such, because
ASTWithSource gives more information about the consumed expression AST
to downstream customers (namely, the expression AST source).
Unblocks #35271
PR Close#35892
This commit improves the `canParse()` method to check that the file is
valid XML and has the expected root node. Previously it was relying upon
a regular expression to do this.
PR Close#35793
Previously, the `Xliff2TranslationParser` only matched files that had a narrow
choice of extensions (e.g. `xlf`) and also relied upon a regular expression
match of an optional XML namespace directive.
This commit relaxes the requirement on both of these and, instead, relies
upon parsing the file into XML and identifying an element of the form
`<xliff version="2.0">` which is the minimal requirement for such files.
PR Close#35793
Previously, the `Xliff1TranslationParser` only matched files that had a narrow
choice of extensions (e.g. `xlf`) and also relied upon a regular expression
match of an optional XML namespace directive.
This commit relaxes the requirement on both of these and, instead, relies
upon parsing the file into XML and identifying an element of the form
`<xliff version="1.2">` which is the minimal requirement for such files.
PR Close#35793
This modifies the internal (but shared with CLI) API for loading/parsing
translation files. Now the parsers will return a new `Diagnostics` object
along with any translations and locale extracted from the file.
It is up to the caller to decide what to do about this, if there are errors
it is suggested that an error is thrown, which is what the `TranslationLoader`
class does.
PR Close#35793
Calling `tick(0, null)` defaults `processNewMacroTasksSynchronously` flag to `true`, however calling `tick(0, null, {})` defaults `processNewMacroTasksSynchronously` to `undefined`. This is undesirable behavior since unless the flag is set explicitly it should still default to `true`.
PR Close#35814
Currently, the `ng_module` rule incorrectly uses manifest paths for
generated imports from the Angular compiler.
This breaks packaging as prodmode output (i.e. `esnext`) is copied in
various targets (`es5` and `es2015`) to the npm package output.
e.g. imports are generated like:
_node_modules/my-pkg/es2015/imports/public-api.js_
```ts
import * as i1 from "angular/packages/bazel/test/ng_package/example/imports/second";
```
while it should be actually:
```ts
import * as i1 from "./second";
```
The imports can, and should be relative so that the files are
self-contained and do not rely on custom module resolution.
PR Close#35841
The options for `flatModuleId` and `flatModuleOutFile` had been removed in the CLI
from generated libraries with 718ee15b9a.
This has been done because `ng-packagr` (which is used to build the
libraries) automatically set these options in-memory when it compiles the library.
No migration has been created for this because there was no actual need to get rid of
this. Keeping the options in the library `tsconfig` does not cause any problems unless
the `tsconfig` is used outside of `ng-packagr`. This was not anticipated, but is now
commonly done in `ng update` migrations.
The `ng update` migrations try to create an instance of the `AngularCompilerProgram` by
simply parsing the `tsconfig`. The migrations make the valid assumption that `tsconfig` files
are not incomplete/invalid. They _definitely_ are in the file system though. It just works for
libraries because `ng-packagr` in-memory completes the invalid `tsconfig` files, so that they
can be passed to the `@angular/compiler-cli`.
We can't have this logic in the `ng update` migrations because it's
out-of-scope for individual migrations to distinguish between libraries
and applications. Also it would be out-of-scope to parse the
`ng-packagr` configuration and handle the tsconfig in-memory completion.
As a workaround though, we can remove the flat-module bundle options
in-memory when creating the compiler program. This is acceptable since
we don't emit the program and the flat module bundles are not needed.
Fixes#34985.
PR Close#35824
This version of `LockFile` creates an "unlocker" child-process that monitors
the main ngcc process and deletes the lock file if it exits unexpectedly.
This resolves the issue where the main process could not be killed by pressing
Ctrl-C at the terminal.
Fixes#35761
PR Close#35861
The previous implementation mixed up the management
of locking a piece of code (both sync and async) with the
management of writing and removing the lockFile that is
used as the flag for which process has locked the code.
This change splits these two concepts up. Apart from
avoiding the awkward base class it allows the `LockFile`
implementation to be replaced cleanly.
PR Close#35861
This reduces the time that `findEntryPoints` takes from 9701.143ms to 4177.278ms, by reducing the file operations done.
Reference: #35717
PR Close#35756
This reverts commit 00f3c58bb9.
Rolling back because it could be breaking e2e tests that assert that
there are no errors in the console after the assertions have run. We can
re-add this in v10.
PR Close#35845
Changes the Ivy unknown element/property messages from being logged with `console.warn` to `console.error`. This should make them a bit more visible without breaking existing apps. Furthermore, a lot of folks filter out warning messages in the dev tools' console, whereas errors are usually still shown.
Fixes#35699.
PR Close#35798
Using the --silent flag prevents the spammy logging messages in the
bazel execution logs.
```
INFO: From Bundling JavaScript packages/zone.js/dist/zone-rollup.umd.js [rollup]:
bazel-out/k8-fastbuild/bin/packages/zone.js/lib/browser/rollup-legacy-main.mjs → bazel-out/k8-fastbuild/bin/packages/zone.js/dist/zone-rollup.umd.js...
created bazel-out/k8-fastbuild/bin/packages/zone.js/dist/zone-rollup.umd.js in 736ms
```
PR Close#35835
It's an error to declare a variable twice on a specific template:
```html
<div *ngFor="let i of items; let i = index">
</div>
```
This commit introduces a template type-checking error which helps to detect
and diagnose this problem.
Fixes#35186
PR Close#35674
This is a follow up to #35637 which resolved a similar issue for `ComponentFactoryResolver`, but not the root cause. When a `NgModuleRef` is created, it instantiates an `Injector` internally which in turn resolves all of injector types. This can result in a circular call that results in an error, because the module is one of the injector types being resolved.
These changes work around the issue by allowing the constructor to run before resolving the injector types.
Fixes#35677.
Fixes#35639.
PR Close#35731
This patch is a follow-up patch to 35c9f0dc2f.
It changes the `computeStyle` function to handle situations where
non string based values are returned from `window.getComputedStyle`.
This situation usually ocurrs in Node-based test environments where
the element or `window.getComputedStyle` is mocked out.
PR Close#35810
Switches our tslint setup to the standard `tslint.json` linter excludes.
The set of files that need to be linted is specified through a Yarn script.
For IDEs, open files are linted with the closest tslint configuration, if the
tslint IDE extension is set up, and the source file is not excluded.
We cannot use the language service plugin for tslint as we have multiple nested
tsconfig files, and we don't want to add the plugin to each tsconfig. We
could reduce that bloat by just extending from a top-level tsconfig that
defines the language service plugin, but unfortunately the tslint plugin does
not allow the use of tslint configs which are not part of the tsconfig project.
This is problematic since the tslint configuration is at the project root, and we
don't want to copy tslint configurations next to each tsconfig file.
Additionally, linting of `d.ts` files has been re-enabled. This has been
disabled in the past and a TODO has been left. This commit fixes the
lint issues and re-enables linting.
PR Close#35800
The test libs should only be included in one jasmine_node_test
otherwise `bazel build //packages/language-service/...` would
end up running `feature_test` and `infra_test` twice.
PR Close#35816
`ɵɵgetInheritedFactory()` is called from generated code for a component which extends another class. This function is detected by Closure to have a side effect and is not able to tree shake the component as a result. Marking it with `noSideEffects()` tells Closure it can remove this function under the relevant tree shaking conditions.
PR Close#35769
`ɵɵNgOnChangesFeature()` would set `ngInherit`, which is a side effect and also not necessary. This was pulled out to module scope so the function itself can be pure. Since it only curries another function, the call is entirely unnecessary. Updated the compiler to only generate a reference to this function, rather than a call to it, and removed the extra curry indirection.
PR Close#35769
This marks the function are "pure" and eligible to be tree shaken by Closure. Without this, initializing `ngDevMode` is considered a side effect which prevents this function from being tree shaken and also any component which calls it.
PR Close#35769
This is useful for propagating return values without them being converted to a string. It still provides the same guarantees to Closure, which will assume that the function invoked is pure and can be tree-shaken accordingly.
PR Close#35769
This commit performs a modularization of the Language Service's existing
diagnostic messages. Such a modularization has two primary advantages:
- Centralization and decoupling of error messages from the code that
generates them makes it easy to add/delete/edit diagnostic messages,
and allows for independent iteration of diagnostic messages and
diagnostic generation.
- Prepares for additional features like annotating the locations where a
diagnostic is generated and enabling the configuration of which
diagnostics should be reported by the language service.
Although it would be preferable to place the diagnostics registry in an
independent JSON file, for ease of typing diagnostic types as an enum
variant of 'ts.DiagnosticCategory', the registry is stored as an object.
Part of #32663.
PR Close#35678
Before this change ngIvy implementation of queries would throw upon
encountering null / undefined query result collected from an embedded
view. It turns out that we might have a provider that explicitly provides
a null / undefined value in a place of a token queried for.
This commit removes a check from the ngIvy query implementation that was
asserting on a query result to be defined.
Fixes#35673
PR Close#35796
Before this change `[class]` and `[className]` were both converted into `ɵɵclassMap`. The implication of this is that at runtime we could not differentiate between the two and as a result we treated `@Input('class')` and `@Input('className)` as equivalent.
This change makes `[class]` and `[className]` distinct. The implication of this is that `[class]` becomes `ɵɵclassMap` instruction but `[className]` becomes `ɵɵproperty' instruction. This means that `[className]` will no longer participate in styling and will overwrite the DOM `class` value.
Fix#35577
PR Close#35668
Prior to this commit, i18n attributes defined on `<ng-template>` tags were not processed by the compiler. This commit adds the necessary logic to handle i18n attributes in the same way how these attrs are processed for regular elements.
PR Close#35681
Prior to this patch, the `margin` and `padding` properties were not
detected properly by Firefox due to them being shorthand properties.
This patch ensures that both `margin` and `padding` are converted
read as `top right bottom left` in the event that the shorthand
property detection fails for auto-styling in Angular animations.
Fix#35463 (FW-1886)
PR Close#35701
With this change we spawn workers lazily based on the amount of work that needs to be done.
Before this change we spawned the maximum of workers possible. However, in some cases there are less tasks than the max number of workers which resulted in created unnecessary workers
Reference: #35717
PR Close#35719
The `ng_package` rule currently creates incorrect UMD module exports
if an entry-point has a module name with numbers included.
For example, consider an entry-point called `@angular/cdk/a11y`. The UMD
module name should be `ng.cdk.a11y`. Instead, `ng_package` currently generates
an UMD module export called `ng.cdk.a11Y`.
This is because the logic for converting dash-case to camel case is
invalid as it uses Starlark's `title()` method. The title method
converts text to title case while we actually just want to capitalize
the first letter of a dash-case segment.
Fixes angular/components#18652.
PR Close#35792
Adds a new entry-point to the `@angular/bazel` `ng_package` test that
contains numbers in the name. e.g. `example/a11y`. This test is added
to replicate a bug where the UMD module export for such entry-points
is incorrectly generated. i.e. `example.a11Y` is generated instead of
`example.a11y`.
PR Close#35792
This commit updates the host bindings micro benchmark to run tests with mutliple directives (where each directive contains host bindings). The number of directives is configurable as a constant in the micro benchmark file. This change is needed to have an ability to measure/compare perf in different scenarios.
PR Close#35736
This commit extends the range of tNode types that may have local refs to include `TNodeType.Container` to account for `<ng-template>`s. Original changes in https://github.com/angular/angular/pull/33415 didn't include that type and as a result, an error is thrown at runtime in case an i18n block contains an `<ng-template>` with local refs.
PR Close#35758
When the `NgIf` directive is used in a template, its context variables
can be used to capture the bound value. This is typically used together
with a pipe or function call, where the resulting value is captured in a
context variable. There's two syntax forms available:
1. Binding to `NgIfContext.ngIf` using the `as` syntax:
```html
<span *ngIf="(user$ | async) as user">{{user.name}}</span>
```
2. Binding to `NgIfContext.$implicit` using the `let` syntax:
```html
<span *ngIf="user$ | async; let user">{{user.name}}</span>
```
Because of the semantics of `ngIf`, it is known that the captured
context variable is non-nullable, however the template type checker
would not consider them as such and still report errors when
`strictNullTypes` is enabled.
This commit updates `NgIf`'s context guard to make the types of the
context variables non-nullable, avoiding the issue.
Fixes#34572
PR Close#35125
This commit removes the `NullAstVisitor` and `visitAstChildren` exported
from `packages/compiler/src/expression_parser/ast.ts` because they
contain duplicate and buggy implementation, and their use cases could be
sufficiently covered by `RecursiveAstVisitor` if the latter implements the
`visit` method. This use case is only needed in the language service.
With this change, any visitor that extends `RecursiveAstVisitor` could
just define their own `visit` function and the parent class will behave
correctly.
A bit of historical context:
In language service, we need a way to tranverse the expression AST in a
selective manner based on where the user's cursor is. This means we need a
"filtering" function to decide which node to visit and which node to not
visit. Instead of refactoring `RecursiveAstVisitor` to support this,
`visitAstChildren` was created. `visitAstChildren` duplicates the
implementation of `RecursiveAstVisitor`, but introduced some bugs along
the way. For example, in `visitKeyedWrite`, it visits
```
obj -> key -> obj
```
instead of
```
obj -> key -> value
```
Moreover, because of the following line
```
visitor.visit && visitor.visit(ast, context) || ast.visit(visitor, context);
```
`visitAstChildren` visits every node *twice*.
PR Close#35619
This commit differentiates language service feature and language service
infrastructure tests. This is primarily to make testing of different
components at the development level easier. This commit continues a
small effort to expand our test coverage and normalize testing
structure.
Also adds test coverage to language service tests. We have quite a bit
to go on that front 🙂.
PR Close#35688
The `packages/localize/src/tools` folder was excluded
from the top level `tsconfig.json` which meant that in IDEs
these source files were not being given the correct configuration.
It was originally excluded because it required the native `node` typings
but this is no longer a requirement.
Removing this folder from the exclusion list exposed a new issue
where there was a typings mismatch between `@babel/...` sources
and the associated `@types/babel__...` typings packages.
A clean up of the package.json and yarn.lock appears to fix this.
PR Close#35711
For view and content queries, the Ivy compiler attempts to statically
evaluate the predicate token so that string predicates containing
comma-separated reference names can be split into an array of strings
during compilation. When the predicate is a dynamic value that cannot be
statically interpreted at compile time, the compiler would previously
produce an error. This behavior breaks a use-case where an `InjectionToken`
is being used as query predicate, as the usage of the `new` keyword
prevents such predicates from being statically evaluated.
This commit changes the behavior to no longer produce an error for
dynamic values. Instead, the expression is emitted as is into the
generated code, postponing the evaluation to happen at runtime.
Fixes#34267
Resolves FW-1828
PR Close#35307
Prior to this change, the logic that compiles Injectable in JIT mode used incorrect configuration that triggers a problem when `ChangeDetectorRef` is used as a dependency. This commit updates the logic to generate correct inject instruction to add the `ChangeDetectorRef` dependency in case it's requested in @Injectable class.
PR Close#35706
This commit adds micro benchmark for host bindings, so that we can assess the impact of changes related to host bindings (for example PR #35568).
PR Close#35705
Source-maps in the wild could be badly formatted,
causing the source-map flattening processing to fail
unexpectedly. Rather than causing the whole of ngcc
to crash, we gracefully fallback to just returning the
generated source-map instead.
PR Close#35718
Previously when rendering flattened source-maps, it was assumed that no
mapping would come from a line that is outside the lines of the actual
source content. It turns out this is not a valid assumption.
Now the code that renders flattened source-maps will handle such
mappings, with the additional benefit that the rendered source-map
will only contain mapping lines up to the last mapping, rather than a
mapping line for every content line.
Fixes#35709
PR Close#35718
If a package has a source-map but it does not provide
the actual content of the sources, then the source-map
flattening was crashing.
Now we ignore such mappings that have no source
since we are not able to compute the merged
mapping if there is no source file.
Fixes#35709
PR Close#35718
This commit adds a new ngcc configuration, `ignorableDeepImportMatchers`
for packages. This is a list of regular expressions matching deep imports
that can be safely ignored from that package. Deep imports that are not
ignored cause a warning to be logged.
// FW-1892
Fixes#35615
PR Close#35683
If an injectable has a `useClass`, Ivy injects the token in `useClass`, rather than the original injectable, if the injectable is re-provided under a different token. The correct behavior is that it should inject the re-provided token, no matter whether it has `useClass`.
Fixes#34110.
PR Close#34574
ɵAnimationDriver can be safely removed from private exports as AnimationDriver
is already a public export. Since its already available, we can safely remove
its declaration and migrate its only usage in our repo to rely on the public
AnimationDriver symbol.
PR Close#35690
Template type-checking within the Ivy compiler has been disabled internally
in g3 until compatibility with the whole codebase could be verified. As that
verification is now complete and template type-checking is known to be
compatible with g3, this commit enables it.
PR Close#35672
This commit normalizes hover and util tests in the language service.
This is part of a small effort to simplify and normalize the language
service testing structure, which currently contains specs that are
largely created and left without relation to other tests.
PR Close#35656
It's possible to pass a directive as an input to itself. Consider:
```html
<some-cmp #ref [value]="ref">
```
Since the template type-checker attempts to infer a type for `<some-cmp>`
using the values of its inputs, this creates a circular reference where the
type of the `value` input is used in its own inference:
```typescript
var _t0 = SomeCmp.ngTypeCtor({value: _t0});
```
Obviously, this doesn't work. To resolve this, the template type-checker
used to generate a `null!` expression when a reference would otherwise be
circular:
```typescript
var _t0 = SomeCmp.ngTypeCtor({value: null!});
```
This effectively asks TypeScript to infer a value for this context, and
works well to resolve this simple cycle. However, if the template
instead tries to use the circular value in a larger expression:
```html
<some-cmp #ref [value]="ref.prop">
```
The checker would generate:
```typescript
var _t0 = SomeCmp.ngTypeCtor({value: (null!).prop});
```
In this case, TypeScript can't figure out any way `null!` could have a
`prop` key, and so it infers `never` as the type. `(never).prop` is thus a
type error.
This commit implements a better fallback pattern for circular references to
directive types like this. Instead of generating a `null!` in place for the
reference, a type is inferred by calling the type constructor again with
`null!` as its input. This infers the widest possible type for the directive
which is then used to break the cycle:
```typescript
var _t0 = SomeCmp.ngTypeCtor(null!);
var _t1 = SomeCmp.ngTypeCtor({value: _t0.prop});
```
This has the desired effect of validating that `.prop` is legal for the
directive type (the type of `#ref`) while also avoiding a cycle.
Fixes#35372Fixes#35603Fixes#35522
PR Close#35622
NG6002/NG6003 are errors produced when an NgModule being compiled has an
imported or exported type which does not have the proper metadata (that is,
it doesn't appear to be an @NgModule, or @Directive, etc. depending on
context).
Previously this error message was a bit sparse. However, Github issues show
that this is the most common error users receive when for whatever reason
ngcc wasn't able to handle one of their libraries, or they just didn't run
it. So this commit changes the error message to offer a bit more useful
context, instructing users differently depending on whether the class in
question is from their own project, from NPM, or from a monorepo-style local
dependency.
PR Close#35620
When binding to `[style]` we correctly sanitized/unwrapped properties but we did not do it for the object itself.
```
@HostBinding("style")
style: SafeStyle = this.sanitizer.bypassSecurityTrustStyle(
"background: red; color: white; display: block;"
);
```
Above code would fail since the `[style]` would not unwrap the `SafeValue` and would treat it as object resulting in incorrect behavior.
Fix#35476 (FW-1875)
PR Close#35564
The library used by ngcc to update the source files (MagicString) is able
to generate a source-map but it is not able to account for any previous
source-map that the input text is already associated with.
There have been various attempts to fix this but none have been very
successful, since it is not a trivial problem to solve.
This commit contains a novel approach that is able to load up a tree of
source-files connected by source-maps and flatten them down into a single
source-map that maps directly from the final generated file to the original
sources referenced by the intermediate source-maps.
PR Close#35132
Currently we resolve the `NgModuleRef.componentFactoryResolver` by going through the injector, but the problem is that `ComponentFactoryResolver` has a dependency on `NgModuleRef`, which means that if the module that's attached to the ref tries to inject `ComponentFactoryResolver` in its constructor, we'll create a circular dependency which throws at runtime.
These changes resolve the issue by creating the `ComponentFactoryResolver` manually ahead of time without going through the injector. We can do this safely, because the only dependency for the resolver is the current module ref which is providing it.
Aside from fixing the issue, another advantage to this approach is that it should reduce the amount of generated JS, because it removes a getter and a provider definitio.
Fixes#35580.
PR Close#35637
Technically, function definitions can live anywhere because they are
hoisted. However, in this case Closure optimizations break when exported
function definitions are referred in another static object that is
exported.
The bad pattern is:
```
exports const obj = {f};
export function f() {...}
```
which turns to the following in Closure's module system:
```
goog.module('m');
exports.obj = {f};
function f() {...}
exports.f = f;
```
which badly optimizes to (note module objects are collapsed)
```
var b = a; var a = function() {...}; // now b is undefined.
```
This is an optimizer bug and should be fixed in Closure, but in the
meantime this change is a noop and will unblock other changes we want to
make.
PR Close#32230
For example, '<div><p string-model~{cursor}></p></div>', when provide the hover info for 'string-model', the 'path.head' is root tag 'div'. Use the parent of 'path.tail' instead.
PR Close#35317
Currently if TestBed detects that TestBed.overrideModule was used for module X, transitive scopes are recalculated recursively for all modules that X imports and previously calculated data (stored in cache) is ignored. This behavior was introduced in https://github.com/angular/angular/pull/33787 to fix stale transitive scopes issue (cache was not updated if module overrides are present).
The perf issue comes from a "diamond" problem, where module X is overridden which imports modules A and B, which both import module C. Under previous logic, module C gets its transitive deps recomputed multiple times, during the recompute for both A and B. For deep graphs and big common/shared modules this can be super costly.
This commit updates the logic to recalculate ransitive scopes for the overridden module, while keeping previously calculated scopes of other modules untouched.
PR Close#35454
Prior to this commit the service worker only treated 504 errors as "effectively offline".
This commit changes the behaviour to treat both 503 (Service Unavailable) and 504 as "offline".
Fixes#35571
PR Close#35595
The only test case for `ngFor` exercises an incorrect usage which causes
two bound attributes to be generated . This commit adds a canonical and
correct usage to show the difference between the two.
PR Close#35671
Now Angular doesn't support add event listeners as passive very easily.
User needs to use `elem.addEventListener('scroll', listener, {passive: true});`
or implements their own EventManagerPlugin to do that.
Angular may finally support new template syntax to support passive event, for now,
this commit introduces a temp solution to allow user to define the passive event names
in zone.js configurations.
User can define a global varibale like this.
```
(window as any)['__zone_symbol__PASSIVE_EVENTS'] = ['scroll'];
```
to let all `scroll` event listeners passive.
PR Close#34503
As a part of the process of setting up Router providers, we use `ApplicationRef` as a dependency while providing `Router` token. The thing is that `ApplicationRef` is actually unused (all referenced were removed in 5a849829c4 (diff-c0baae5e1df628e1a217e8dc38557fcb)), but it's still listed as dependency. This is causing problems in case `Router` is used as a dependency for factory functions provided as `APP_INITIALIZERS` multi-token (causing cyclic dependency). This commit removes unused `ApplicationRef` dependency in `Router`, so it can be used without causing cyclic dependency issue.
PR Close#35642
Previously if there were two path-mapped libraries that are in
different directories but the path of one started with same string
as the path of the other, we would incorrectly return the shorter
path - e.g. `dist/my-lib` and `dist/my-lib-second`. This was because
the list of `basePaths` was searched in ascending alphabetic order and
we were using `startsWith()` to match the path.
Now the `basePaths` are searched in reverse alphabetic order so the
longer path will be matched correctly.
// FW-1873
Fixes#35536
PR Close#35592
* it's tricky to get out of the runfiles tree with `bazel test` as `BUILD_WORKSPACE_DIRECTORY` is not set but I employed a trick to read the `DO_NOT_BUILD_HERE` file that is one level up from `execroot` and that contains the workspace directory. This is experimental and if `bazel test //:test.debug` fails than `bazel run` is still guaranteed to work as `BUILD_WORKSPACE_DIRECTORY` will be set in that context
* test //integration:bazel_test and //integration:bazel-schematics_test exclusively
* run "exclusive" and "manual" bazel-in-bazel integration tests in their own CI job as they take 8m+ to execute
```
//integration:bazel-schematics_test PASSED in 317.2s
//integration:bazel_test PASSED in 167.8s
```
* Skip all integration tests that are now handled by angular_integration_test except the tests that are tracked for payload size; these are:
- cli-hello-world*
- hello_world__closure
* add & pin @babel deps as newer versions of babel break //packages/localize/src/tools/test:test
@babel/core dep had to be pinned to 7.6.4 or else //packages/localize/src/tools/test:test failed. Also //packages/localize uses @babel/generator, @babel/template, @babel/traverse & @babel/types so these deps were added to package.json as they were not being hoisted anymore from @babel/core transitive.
NB: integration/hello_world__systemjs_umd test must run with systemjs 0.20.0
NB: systemjs must be at 0.18.10 for legacy saucelabs job to pass
NB: With Bazel 2.0, the glob for the files to test `"integration/bazel/**"` is empty if integation/bazel is in .bazelignore. This glob worked under these conditions with 1.1.0. I did not bother testing with 1.2.x as not having integration/bazel in .bazelignore is correct.
PR Close#33927
When a pipe inherits its constructor, and as a result its factory, from an injectable in AOT mode, it can end up throwing an error, because the inject implementation hasn't been set yet. These changes ensure that the implementation is set before the pipe's factory is invoked.
Note that this isn't a problem in JIT mode, because the factory inheritance works slightly differently, hence why this test isn't going through `TestBed`.
Fixes#35277.
PR Close#35468
Under View Engine's default (non-fullTemplateTypeCheck) checking, object and
array literals which appear in templates are treated as having type `any`.
This allows a number of patterns which would not otherwise compile, such as
indexing an object literal by a string:
```html
{{ {'a': 1, 'b': 2}[value] }}
```
(where `value` is `string`)
Ivy, meanwhile, has always inferred strong types for object literals, even
in its compatibility mode. This commit fixes the bug, and adds the
`strictLiteralTypes` flag to specifically control this inference. When the
flag is `false` (in compatibility mode), object and array literals receive
the `any` type.
PR Close#35462
In its default compatibility mode, the Ivy template type-checker attempts to
emulate the View Engine default mode as accurately as is possible. This
commit addresses a gap in this compatibility that stems from a View Engine
type-checking bug.
Consider two template expressions:
```html
{{ obj?.field }}
{{ fn()?.field }}
```
and suppose that the type of `obj` and `fn()` are the same - both return
either `null` or an object with a `field` property.
Under View Engine, these type-check differently. The `obj` case will catch
if the object type (when not null) does not have a `field` property, while
the `fn()` case will not. This is due to how View Engine represents safe
navigations:
```typescript
// for the 'obj' case
(obj == null ? null as any : obj.field)
// for the 'fn()' case
let tmp: any;
((tmp = fn()) == null ? null as any : tmp.field)
```
Because View Engine uses the same code generation backend as it does to
produce the runtime code for this expression, it uses a ternary for safe
navigation, with a temporary variable to avoid invoking 'fn()' twice. The
type of this temporary variable is 'any', however, which causes the
`tmp.field` check to be meaningless.
Previously, the Ivy template type-checker in compatibility mode assumed that
`fn()?.field` would always check for the presence of 'field' on the non-null
result of `fn()`. This commit emulates the View Engine bug in Ivy's
compatibility mode, so an 'any' type will be inferred under the same
conditions.
As part of this fix, a new format for safe navigation operations in template
type-checking code is introduced. This is based on the realization that
ternary based narrowing is unnecessary.
For the `fn()` case in strict mode, Ivy now generates:
```typescript
(null as any ? fn()!.field : undefined)
```
This effectively uses the ternary operator as a type "or" operation. The
resulting type will be a union of the type of `fn()!.field` with
`undefined`.
For the `fn()` case in compatibility mode, Ivy now emulates the bug with:
```typescript
(fn() as any).field
```
The cast expression includes the call to `fn()` and allows it to be checked
while still returning a type of `any` from the expression.
For the `obj` case in compatibility mode, Ivy now generates:
```typescript
(obj!.field as any)
```
This cast expression still returns `any` for its type, but will check for
the existence of `field` on the type of `obj!`.
PR Close#35462
I think the bug is introduced in my PR#34847. For example, 'model="{{title}}"', the attribute value cannot be parsed by 'parseTemplateBindings'.
PR Close#35494
In ES5 code, TypeScript requires certain helpers (such as
`__spreadArrays()`) to be able to support ES2015+ features. These
helpers can be either imported from `tslib` (by setting the
`importHelpers` TS compiler option to `true`) or emitted inline (by
setting the `importHelpers` and `noEmitHelpers` TS compiler options to
`false`, which is the default value for both).
Ngtsc's `StaticInterpreter` (which is also used during ngcc processing)
is able to statically evaluate some of these helpers (currently
`__assign()`, `__spread()` and `__spreadArrays()`), as long as
`ReflectionHost#getDefinitionOfFunction()` correctly detects the
declaration of the helper. For this to happen, the left-hand side of the
corresponding call expression (i.e. `__spread(...)` or
`tslib.__spread(...)`) must be evaluated as a function declaration for
`getDefinitionOfFunction()` to be called with.
In the case of imported helpers, the `tslib.__someHelper` expression was
resolved to a function declaration of the form
`export declare function __someHelper(...args: any[][]): any[];`, which
allows `getDefinitionOfFunction()` to correctly map it to a TS helper.
In contrast, in the case of emitted helpers (and regardless of the
module format: `CommonJS`, `ESNext`, `UMD`, etc.)), the `__someHelper`
identifier was resolved to a variable declaration of the form
`var __someHelper = (this && this.__someHelper) || function () { ... }`,
which upon further evaluation was categorized as a `DynamicValue`
(prohibiting further evaluation by the `getDefinitionOfFunction()`).
As a result of the above, emitted TypeScript helpers were not evaluated
in ES5 code.
---
This commit changes the detection of TS helpers to leverage the existing
`KnownFn` feature (previously only used for built-in functions).
`Esm5ReflectionHost` is changed to always return `KnownDeclaration`s for
TS helpers, both imported (`getExportsOfModule()`) as well as emitted
(`getDeclarationOfIdentifier()`).
Similar changes are made to `CommonJsReflectionHost` and
`UmdReflectionHost`.
The `KnownDeclaration`s are then mapped to `KnownFn`s in
`StaticInterpreter`, allowing it to statically evaluate call expressions
involving any kind of TS helpers.
Jira issue: https://angular-team.atlassian.net/browse/FW-1689
PR Close#35191
This is in preparation of using the `KnownFn` type for known TypeScript
helpers (in addition to built-in functions/methods). This will in turn
allow simplifying the detection of both imported and emitted TypeScript
helpers.
PR Close#35191
Andrew Kushnir
Greg Magolan
Pete Bacon Darwin
George Kalpakas
Paul Gschwendtner
Sonu Kapoor
JoostK
Keen Yee Liau
Keen Yee Liau
Pawel Kozlowski
Filipe Silva
Wagner Maciel
ayazhafiz
danranVm
Misko Hevery
Alex Rickabaugh
JiaLiPassion
Alex Eagle
Ayaz Hafiz
crisbeto
Alan Agius
Joey Perrott
Andrew Scott
ivanwonder
Matias Niemelä
Santosh Yadav
Yiting Wang
Doug Parker
KostyaTretyak
Lars Gyrup Brink Nielsen
Zac
Felix Becker
Rado Kirov
Alex Wiese
Pusztai Tibor