I updated the payload size limits as well. There still seem to be size regressions in the framework,
but at least the polyfills now uses the evergreen build of zones so we shaved off a few KB there.
PR Close#30183
Previously, the `aio_monitoring` job was testing both the stable
(https://angular.io/) and the @next (https://next.angular.io/) versions.
This commit splits the tests into two separate jobs (still run as part
of the same workflow). This speeds up the tests (since the two jobs can
now run in parallel) and makes it easier to isolate failures (e.g.
identify which branch is failing, disable one of the two, etc.).
(Credits to @petebacondarwin 😉)
PR Close#30110
This commit also changes the config files and their layout to
(reasonably closely) match what the cli would generate for a new app.
Related Jira issue: [TOOL-815](https://angular-team.atlassian.net/browse/TOOL-815)
PR Close#29926
The exact messages depend on the timing of several events and may vary
between runs. This occasionally causes flakes on CI.
This commit reduces the risk of flakes by loosen the conditions to only
check for what we actually care about.
Fixes#29544
PR Close#29757
This minimises the risk of unexpected failures due to breaking changes,
when building a new image (e.g. as a result of an unrelated config
change in Dockerfile).
PR Close#29976
Previously, the preview server docker image was based on Debian 8
(jessie). Recently, `jessie-updates` and `jessie-backborts` were removed
from the Debian mirrors ([more info][1]), thus breaking new builds of
the image.
Instead of updating `/etc/apt/sources.list` to remove the obsolete
sources, this commit upgrades to Debian 9 (stretch).
(The GCE VM running the preview server docker container was also
upgraded from Debian 8 to 9 this morning.)
---
Other changes:
- Removed dependency on `chkconfig`, which is not supported on Debian 9.
- Installing `nginx` from the regular repositories (instead of
`*-backports).
- Upgraded to `pm2` v3, which can handle hooking itself up to system
startup better (without `chkconfig` - see above).
- Updated tests to reflect the fact that `nginx` has dropped the reason
phrase in response status lines for HTTP/2 (in compliance with
[the spec][2]). (HTTP/1.1: `HTTP/1.1 200 OK` | HTTP/2: `HTTP/2 200`)
[1]: https://www.lucas-nussbaum.net/blog/?p=947
[2]: https://http2.github.io/http2-spec/#rfc.section.8.1.2.4
PR Close#29976
In #29926, the size of the build artifacts has increased due to turning
on differential loading (which generates an es2015/es5 pair for each JS
resource).
To avoid the preview server's rejecting the build artifacts (as in
[288181][1]), this commit increases the max allowed artifact size from
20MB to 25MB (current artifact size after #29926 is ~22MB).
[1]: https://circleci.com/gh/angular/angular/288181
PR Close#29976
In #29953, the wait period for SW on localhost was increased to avoid CI
flakes for the PWA score tests.
This commit expands the fix to non-localhost origins to avoid flakes in
the `aio_monitoring` job, when CircleCI VMs/network are slow.
(For reference, example failures: [289127], [289238])
[289127]: https://circleci.com/gh/angular/angular/289127
[289238]: https://circleci.com/gh/angular/angular/289238
PR Close#29988
In light of #29926, that will change the path of `tsconfig.app.json`,
this commit switches from a hard-coded `tsconfig.app.json` path to
looking it up in `angular.json` (to be more future-proof).
PR Close#29989
Previously, the `build-with-ivy` script could be used to build the `aio`
project with Ivy (once it had been prepared with `ivy-ngcc`, etc.) and
then restored the configuration (e.g. `tsconfig.json`) to non-ivy mode.
As a result, it was not useful for running other commands (e.g. unit/e2e
tests) in Ivy mode.
This commit renames the script to `switch-to-ivy` and employs a
different model (similar to `ng-packages-installer`), where the project
is setup to run in Ivy mode and then all subsequent commands are
executed in that mode (until restored).
Since this is currently only used on CI, there is no automatic way to
switch back to non-ivy mode (but it could be implemented in the future
if needed).
Finally, the script now modifies `src/tsconfig.app/json` instead of
`tsconfig.json` to ensure that the `angularCompilerOptions` are not
ignored/overwritten. This is also closer to what the cli generates
with the `--enable-ivy` option.
PR Close#29989
The server used for testing on localhost has less optimizations (e.g.
serves uncompressed files), so we need to wait longer the ServiceWorker
to be loaded and registered to allow Lighthouse to reliably detect it,
especially on slower environments (e.g. CI).
Related: https://github.com/GoogleChrome/lighthouse/issues/5527#issuecomment-483710849Fixes#29910
PR Close#29953
As of b9fead7f8, the image is referenced in `announcements.json`, but it
was already removed (as it wasn't used at the time) in 7f905da33.
PR Close#29902
We are using `chrome-launcher` and `lighthouse-logger` in
[test-pwa-score][1], but we do not explicitly list them as
`devDependencies`, so we are relying on the fact that they happen to be
hoisted in `node_modules/` by yarn. This may unexpectedly break in the
future.
This commit fixes this, by explicitly listing them as `devDependencies`.
[1]: https://github.com/angular/angular/blob/ea70d41ac/aio/scripts/test-pwa-score.js#L14-L18
PR Close#29904
The `Δ` caused issue with other infrastructure, and we are temporarily
changing it to `ɵɵ`.
This commit also patches ts_api_guardian_test and AIO to understand `ɵɵ`.
PR Close#29850
1) Path mappings are to be added in the workspace tsconfig files, hence the path needs to be `./` and not `../`
2) Fix export symbol as it cannot contain `-`
Fixes#29807
PR Close#29810
The `announcements.json` file should not be included in the sitemap and
including it causes an error in Google Search Console (because the
generated URL does not exist).
(This is a follow-up to fbef94a8e.)
PR Close#29754
Now, one can add an `@alias` tag to API docs, which tells dgeni that this
API element (usually a `const`) is really just an alias for some API element
defined elsewhere.
Dgeni will then look up this API element and copy over the properties from
the alias to the current doc.
For example, we would like to privately export an Enum from `@angular/core`
but then publicly export this from `@angular/common`:
**packages/core/private_exports.ts**
```ts
/**
* Description of this document.
*/
export enum ɵSomeEnum { ... }
```
**packages/common/public_api.ts**
```ts
import {ɵSomeEnum} from '@angular/core';
/**
* @alias core/ɵSomeEnum
*/
export const SomeEnum = ɵSomeEnum;
```
In the generated docs there will be a page for `common/SomeEnum`, which
will be rendered as an enum, rather than a const, showing the description
extracted from the `core/ɵSomeEnum`.
---
The implementation of this feature required some refactoring of the other
processing:
1. Previously `ɵ` prefixed exports were not even considered.
2. Due to 1. some processors needed to have guards added to ignore such
private exports (`addMetadataAliases` and `checkContentRules`).
3. The processing of package pages had to be reworked (and split) so that
it picked up the aliased export docs after their alias proeprties had
been copied.
See FW-1207, FW-632, #29249
PR Close#29673
Currently our plan is to skip the publish, docgen, and update steps for this package.
During RC, we'll determine if the breaking change is too difficult for users, in which case we might restore the package for another major.
PR Close#29550
Previously we had to share code between upgrade/dynamic and upgrade/static
by symlinking the `src` folder, which allowed both packages to access
the upgrade/common files.
These symlinks are always problematic on Windows, where we had to run
a script to re-link them, and restore them.
This change uses Bazel packages to share the `upgrade/common` code,
which avoids the need for symlinking the `src` folder.
Also, the Windows specific scripts that fixup the symlinks have also
been removed as there is no more need for them.
PR Close#29466
One of the tests introduced in #29601 is susceptible to a kind of
WebDriver flake related to trying to click elements hidden behind fixed
positioned elements.
This commit works around the issue by clicking the elements directly
using JavaScript (instead of `WebElement#click()`).
PR Close#29641
Previously, if the shape of data in `contributors.json` was incorrect,
there would be a runtime error (when trying to parse the data), which
would result in a blank page. The likelihood for this happening is
higher after #29553, where the shape of data changed.
This commit adds some basic e2e tests that verify the page works as
expected and there are contributors listed.
PR Close#29601
PhantomJS is [not being developed any more][1] and with modern
alternatives (such as Chrome headless) there is no reason to keep it as
a dependency.
[1]: https://github.com/ariya/phantomjs/issues/15344
PR Close#29611
Now that "Collaborators" is a separate group in the contributors page,
having "Angular Collaborators" as the heading of the page (which also
contains the "Angular" and "GDE" groups) is confusing.
Changing the title to "Angular Contributors" to avoid confusion.
PR Close#29553
The name of the group also serves as the group tab's title in the docs
app and having "Collaborator" (singular) as a title for a list of people
didn't read well.
Changing th group name (and thus tab title) to "Collaborators" (plural).
PR Close#29553
When I tried one of the examples provided in the documention, encountered the " Can't bind to 'ngModel' since it isn't a known property of 'select' ” error. So to resolve it I imported the FormsModule in ngModule. If it is mentioned in the documentation, it would be handy for the beginners to try and learn. Thanks for considering.
Duplicate of pull Request# 29206, As I encountered few issues after multiple authors corrected, So I am creating the new pull request
PR Close#29522
The API changes are due to enabling strict checks in TypeScript (via `strict: true`).
The payload size changes in `polyfills.js` are due to more browser APIs being patched in recent versions (e.g. `fetch`, `customElement v1`).
PR Close#28219
Sometimes, in ESM5 code, aliases to exported variables are used internally
to refer to the exported value. This prevented some analysis from being
able to match up a reference to an export to the actual export itself.
For example in the following code:
```
var HttpClientXsrfModule = /** @class */ (function () {
function HttpClientXsrfModule() {
}
HttpClientXsrfModule_1 = HttpClientXsrfModule;
HttpClientXsrfModule.withOptions = function (options) {
if (options === void 0) { options = {}; }
return {
ngModule: HttpClientXsrfModule_1,
providers: [],
};
};
var HttpClientXsrfModule_1;
HttpClientXsrfModule = HttpClientXsrfModule_1 = tslib_1.__decorate([
NgModule({
providers: [],
})
], HttpClientXsrfModule);
return HttpClientXsrfModule;
}());
```
We were not able to tell that the `ngModule: HttpClientXsrfModule_1` property
assignment was actually meant to refer to the `function HttpClientXrsfModule()`
declaration. This caused the `ModuleWithProviders` processing to fail.
This commit ensures that we can compile typings files using the ESM5
format, so we can now update the examples boilerplate tool so that it
does not need to compile the ESM2015 format at all.
PR Close#29092
Now that we are using package.json properties to indicate which
entry-point format to compile, it turns out that we don't really
need to distinguish between flat and non-flat formats, unless we
are compiling `@angular/core`.
PR Close#29092
You can now specify a list of properties in the package.json that
should be considered (in order) to find the path to the format to compile.
The build marker system has been updated to store the markers in
the package.json rather than an additional external file.
Also instead of tracking the underlying bundle format that was compiled,
it now tracks the package.json property.
BREAKING CHANGE:
The `proertiesToConsider` option replaces the previous `formats` option,
which specified the final bundle format, rather than the property in the
package.json.
If you were using this option to compile only specific bundle formats,
you must now modify your usage to pass in the properties in the package.json
that map to the format that you wish to compile.
In the CLI, the `--formats` is no longer available. Instead use the
`--properties` option.
FW-1120
PR Close#29092
This guide is to help third party administrators to collect usage analytics
gathering for their own users with their own Google Analytics dashboard. It
is not meant for a generic audience.
PR Close#29382
The instructions lead you to think you run this step before setting
up your locale. The command is mentioned further in the guide after
setup is complete.
Closes#26052
PR Close#29313
With 63fb6c08cf1d69f912a0a4e9a28846d6e6985d04, the bug that required
us to temporarily disable these two SystemJS JIT tests has been fixed.
Therefore we can re-enable these tests.
PR Close#29083
It is useful for manually checking that all guides/examples/images have
owners in `.github/CODEOWNERS`, but is not used for automatic
verification (e.g. on CI) for now.
PR Close#28597
- remove individuals from @angular/* package.json, we don't keep them up-to-date
- switch keys in contributors.json to GitHub handles, seems like a better identifier and lets us grab avatar images from GitHub account
- move emeritus ppl to a new Alumni group (won't yet appear on the site)
- add "lead/mentor" keys so we know who is coordinating work
- add a script that generates an "org chart" graphic
PR Close#28930
Currently when building AIO with Ivy, we run Ngcc and transform
all found formats. This potentially slows down the build (and
therefore the "test_aio_local_ivy" job). Since it's not necessary
to build all formats, and we only need "fesm5" and "fesm2015",
we can explicitly specify the required formats.
**Note**: Currently this does not have any big effect, because Angular
Material does not ship ES2015/ES5 files. The change primarily just
suppresses the Ngcc messages for Material not providing ES2015/ES5
entry-points.
Technically if new non-Ivy packages are added to AIO, this
speeds up the build as we don't build the unused formats.
PR Close#29117
As a side effect of 09b34bae8655d4251516655c317b150c46cd3653,
we fixed that the docs systemjs examples currently do not run
with Ivy in JIT mode. This now uncovered new failures with the JIT
resource loading. e.g.
```
zone.js:665 Unhandled Promise rejection: Component 'PhoneListComponent' is not resolved:
- templateUrl: ./phone-list.template.html
Did you run and wait for 'resolveComponentResources()'? ; Zone: <root> ; Task: Promise.then ; Value: Error: Component 'PhoneListComponent' is not resolved:
- templateUrl: ./phone-list.template.html
Did you run and wait for 'resolveComponentResources()'?
at Function.get (directive.ts:54)
at getComponentDef (definition.ts:648)
at verifyDeclarationsHaveDefinitions (module.ts:185)
at Array.forEach (<anonymous>)
at verifySemanticsOfNgModuleDef (module.ts:159)
at Function.get (module.ts:132)
at getInjectorDef (defs.ts:181)
at R3Injector.processInjectorType (r3_injector.ts:230)
at eval (r3_injector.ts:114)
at eval (r3_injector.ts:451) Error: Component 'PhoneListComponent' is not resolved:
```
We temporarily disable these two failing SystemJS examples by adding them to the
`fixmeIvyExamples` list.
PR Close#28984
Currently when adding the example boilerplate to all
examples with Ivy enabled, we run Ngcc and transform
all found formats. This potentially slows down the build and
is not necessary as we only need the "fesm5" and "fesm2015" bundles.
PR Close#28984
Angular supports using <style> and <link> tags inline in component
templates, but previously such tags were not implemented within the ngtsc
compiler. This commit introduces that support.
FW-1069 #resolve
PR Close#28997
The supposedly visually hidden `mat-icon` creates unnecessary space at
the bottom of the page (below the footer) in recent Chrome versions.
This didn't happen before and it still doesn't happen in other browsers
(Firefox, Edge, IE).
This commit fixes it by wrapping the icon in a visually hidden `div`
container, which doesn't have other styles (such as `mat-icon` does)
that could affect the layout of the page.
Fixes#28858
PR Close#28864
This should be `ngsw.json` not `ngsw-config.json` as the latter is only the src file that gets then compiled into the `ngsw.json` and placed into the `dist` folder
PR Close#28832
Updating the doc to add the beginning label.
I'm not sure if this was the way it was intended, but it looked strange with just an ending </label> tag.
PR Close#28602
This guide is not being shown publicly, and its test is currently being ignored.
Instead of deleting this test and guide, it may be repurposed in the future for a local development guide.
PR Close#28592
Previously, `ng-packages-installer` would replace the version ranges for
all dependencies that were peer dependencies of an Angular package with
the version range used in the Angular package. This effectively meant
that the pinned version (from `yarn.lock`) for that dependency was
ignored (even if the pinned version satisfied the new version range).
This commit reduces non-determinism in CI jobs using the locally built
Angular packages by always using pinned versions of dependencies for
Angular package peer dependencies if possible.
For example, assuming the following versions for the RxJS dependency:
- **aio/package.json**: `rxjs: ^6.3.0`
- **aio/yarn.lock**: `rxjs@^6.3.0: 6.3.3`
- **@angular/core#peerDependencies**: `rxjs: ^6.0.0`
...the following versions would be used with `ng-packages-installer`:
- Before this commit:
- **aio/package.json**: `rxjs: ^6.0.0`
- **node_modules/rxjs/**: `6.4.0` (latest version satisfying `^6.0.0`)
- After this commit:
- **aio/package.json**: `rxjs: ^6.3.0`
- **node_modules/rxjs/**: `6.3.3` (because it satisfies `^6.0.0`)
PR Close#28510
`ng-packages-installer` can be used to replace Angular packages with
locally built ones (from `dist/packages-dist/`) along with their peer
dependencies.
Previously, in order to achieve this, `yarn install` was called with the
`--no-lockfile` option, which resulted in installing the latest versions
of all dependencies (including transitive ones) permitted by the
corresponding version ranges in `package.json` files. As a result, newly
released versions would be picked, resulting in unexpected,
non-deterministic breakages in CI.
This commit calls `yarn install` with the `--pure-lockfile` option
instead. As a result, only the Angular packages (for which the locally
built ones are used) and their peer dependencies are unpinned; the
pinned versions from `yarn.lock` are used for all other (direct and
transitive) dependencies.
While this does not eliminate non-determinism across builds, it
significantly reduces it.
PR Close#28510
Since b43f8bc7d, RxJS does not need to be patched any more in the
top-level `node_modules/`, so we don't need to special-case RxJS in
`ng-package-installer` and use `node_modules/rxjs/`.
PR Close#28510
The docs don't mention that the app will never be stable if a `setInterval` is running somewhere, and that it will prevent the servcie worker to be registered too.
PR Close#28102
There is no debouncing when we store the scroll Position.
Currently, we have a message in the console after a while:
>Throttling history state changes to prevent the browser from hanging
see: https://bugs.chromium.org/p/chromium/issues/detail?id=786211 for more informations
PR Close#28368
Currently our version of Yarn is installed through
the "circleci/node" docker image. This is problematic
because in order to be able to update Yarn, we always
need to update the docker image to a version that
comes with the desired Yarn version. Sometimes there
is no docker image with the desired latest Yarn version,
and therefore we cannot easily update the Yarn version.
Additionally updating the docker image also means that
we need to update our version of NodeJS, as well as the
version of `openssl` might have changed (meaning that
our encrypted credential files may not be decodable with
the new version of `openssl`)
PR Close#28546
By default, `webdriver-manager update` will download the latest
ChromeDriver version, which might not be compatible with the Chrome
version included in the [docker image used on CI], causing CI failures.
Previously, we used to pin the ChromeDriver version on CI in
[ngcontainer's Dockerfile][2]. This was accidentally broken in #26691,
while moving from ngcontainer to default CircleCI docker images.
This commit fixes the issue by pinning ChromeDriver to a known
compatible version.
[1]: bfd48d156d/.circleci/config.yml (L16)
[2]: bfd48d156d/tools/ngcontainer/Dockerfile (L63)
PR Close#28494
Mike Brocchi
William Koza
George Kalpakas
陈旭10045812
arjunyel
Richard Lea
Kapunahele Wong
Raja Rama Mohan Thavalam
Max Kramer
Brad Green
Igor Minar
jenniferfell
Judy Bogart
Uday Vunnam
Suraj Poddar
Vani
Filipe Silva
Peter Johan Salomonsen
JiaLi.Passion
Igor Minar
Alex Eagle
Dustin M. Eastway
Andrew Kushnir
Trevor Karjanis
Brandon
Kenny Schank
iliesaithamouda
Suguru Inatomi
Ahsan Ayaz
hpawe01
Jurgen Van de Moere
Alex Rickabaugh
Alan Agius
Surya Malladi
Santosh Yadav
Ben Lesh
hateonion
Renan Montebelo
Andrew Seguin
Pete Bacon Darwin
musou1500
zverbeta
Dave
Maxime Lafarie
Stephen Fluin
Kara
Emilie Huet
cexbrayat
Tim Deschryver
Martin Ockovsky
Jorge Cano
Amit Chaurasia
Roland Rytz
Jun
javatutorials2016
JoostK
Bonnie Brennan
Ricky Roller
davidlsharp1
Amadou Sall
Siddharth Ajmera
luixaviles
Justin Schwartzenberger
Hans Larsen
Robert Tyree
Eduard
Greg Magolan
Paul Gschwendtner
Sam Julien
Adam Plumer
Patrick Roche
tomastrajan
Author Name
Nikita Poltoratsky
nchetankumar
Mikhail Tatsky
Camille Roux
softchris
Rick Katka
Oscar Busk
Daniel Ruf
Jeferson Duwe
Sharon DiOrio
Juri Strumpflohner
sis0k0
Nikita Potapenko
Jamie R. Rytlewski
Keilla Fernandes
Sergej Grilborzer
Marc Laval
SebastienBtr
Nikita Potapenko
Sebastian Dorn
LHearen
Jeremy Elbourn
Jeff Cross
jithil-kore