We are close enough to blacklist a few test targets, rather than whitelist targets to run...
Because bazel rules can be composed of other rules that don't inherit tags automatically,
I had to explicitly mark all of our ts_library and ng_module targes with "ivy-local" and
"ivy-jit" tags so that we can create a query that excludes all fixme- tagged targets even
if those targets are composed of other targets that don't inherit this tag.
This is the updated overview of ivy related bazel tags:
- ivy-only: target that builds or runs only under ivy
- fixme-ivy-jit: target that doesn't yet build or run under ivy with --compile=jit
- fixme-ivy-local: target that doesn't yet build or run under ivy with --compile=local
- no-ivy-jit: target that is not intended to build or run under ivy with --compile=jit
- no-ivy-local: target that is not intended to build or run under ivy with --compile=local
PR Close#26471
Allow the jsdoc tag processing to be configured by
type (export, member, param) and by action (required,
banned, toCopy).
This is a pre-requisite to moving over to using `@publicApi`
tags rather than `@stable` and `@experimental`.
PR Close#26595
This commit also removes the extra jasminewd2 typings, since the changes
have been merged in the official typings with
DefinitelyTyped/DefinitelyTyped#28957.
PR Close#26139
Using Renderer’s setElementAttribute or setElementStyle with a null or undefined value removes the
corresponding attribute or style. The argument type should allow this when using strictNullChecks.
Closes#13686
PR Close#17065
This commit adds an ngTemplateGuard_ngIf static method to the NgIf
directive and an ngTemplateContextGuard static method to NgFor. The
function of these two static methods is to enable type narrowing
within generated type checking code for consumers of the directives.
PR Close#26203
This fix is for the issue below when compiling I18N Angular apps using closure.
For certain locales closure converts the input locale id to a different equivalent locale string. For example if the input locale is 'id'(for Indonesia) goog.LOCALE is set to 'in' and the closure locale data is registered only for 'in'. The Angular compiler uses the original input locale string, 'id' to set the LOCALE_ID token and there is a mismatch of locale used to register and locale used when requesting the locale data.
The fix is for the closure-locale.ts code to register the locale data for all equivalent locales names so that it doesn't matter what goog.LOCALE is actually set to.
PR Close#25867
When using ViewEncapsulation.ShadowDom, Angular will not remove the child nodes of the DOM node a root Component is bootstrapped into. This enables developers building Angular Elements to use the `<slot>` element to do native content projection.
PR Close#24861
CanLoad now defines UrlSegment[] as a second parameter of the function.
Users can store the initial url segments and refer to them later, e.g. to go
back to the original url after authentication via router.navigate(urlSegments).
Existing code still works as before because the second function parameter
does not have to be defined.
Closes#12411
PR Close#13127
This has been deprecated to keep selector consistent with other core Angular selectors. As element selectors are in kebab-case.
Now deprecated:
```
<ngForm #myForm="ngForm">
```
After:
```
<ng-form #myForm="ngForm">
```
You can also choose to supress this warnings by providing a config for `FormsModule` during import:
```ts
imports: [
FormsModule.withConfig({warnOnDeprecatedNgFormSelector: 'never'});
]
Closes: #23678
PR Close#23721
Previously, some of the *Def symbols were not exported or were exported
as public API. This commit ensures every definition type is in the
private export namespace.
PR Close#24862
This commit moves the compiler compliance tests into compiler-cli,
and uses ngtsc to run them instead of the custom compilation
pipeline used before. Testing against ngtsc allows for validation
of the real compiler output.
This commit also fixes a few small issues that prevented the tests
from passing.
PR Close#24862
Within an @NgModule it's common to include in the imports a call to
a ModuleWithProviders function, for example RouterModule.forRoot().
The old ngc compiler was able to handle this pattern because it had
global knowledge of metadata of not only the input compilation unit
but also all dependencies.
The ngtsc compiler for Ivy doesn't have this knowledge, so the
pattern of ModuleWithProviders functions is more difficult. ngtsc
must be able to determine which module is imported via the function
in order to expand the selector scope and properly tree-shake
directives and pipes.
This commit implements a solution to this problem, by adding a type
parameter to ModuleWithProviders through which the actual module
type can be passed between compilation units.
The provider side isn't a problem because the imports are always
copied directly to the ngInjectorDef.
PR Close#24862
This change turns on preserve-symlinks in nodejs to verify hermeticity of the Angular build.
BREAKING CHANGE: Use of @angular/bazel rules now requires calling ng_setup_workspace() in your WORKSPACE file.
For example:
local_repository(
name = "angular",
path = "node_modules/@angular/bazel",
)
load("@angular//:index.bzl", "ng_setup_workspace")
ng_setup_workspace()
PR Close#24881
InjectorDef is parameterized on the type of the injector
configuration class (e.g. the @NgModule decorated type). Previously
this parameter was not included when generating .d.ts files that
contained InjectorDefs.
PR Close#24738
The reporter was added in 87d56acda, with the purpose of fixing
source-map paths (which was apparently needed back then). Things have
moved around a lot since then and the custom reporter doesn't seem to be
necessary any more. By removing the reporter, we have one less thing to
worry about while upgrading karma; plus we get improvements in built-in
reporters for free.
Output with the custom reporter:
```
at someMethod (packages/core/.../some-file.ts:13:37)
```
Output with the built-in reporter:
```
at someMethod (packages/core/.../some-file.ts:13.37 <- dist/all/@angular/core/.../some-file.js:1:337)
```
PR Close#24803
Due to changes in karma@1.0.0, `internal-angular` karma reporter stopped
showing browser logs (such as `console.log()` etc.).
Related to d571a5173.
PR Close#24803
With these changes, the types are a little stricter now and also not
compatible with Protractor's jasmine-like syntax. So, we have to also
use `@types/jasminewd2` for e2e tests (but not for non-e2e tests).
I also had to "augment" `@types/jasminewd2`, because the latest
typings from [DefinitelyTyped][1] do not reflect the fact that the
`jasminewd2` version (v2.1.0) currently used by Protractor supports
passing a `done` callback to a spec.
[1]: 566e039485/types/jasminewd2/index.d.ts (L9-L15)Fixes#23952Closes#24733
PR Close#19904
The js_expected_symbol_test implementation extracts symbols names
from a rollup iife bundle. Previously, it only handled the case
with a simple 'var bundle = ...;' statement.
Sometimes, rollup produces a more complex bundle, where the 'bundle'
variable is not the only top-level variable declared in the same
declaration statement. This commit patches the symbol exctractor
to support this more complex case.
Additionally, when the symbol test fails, it prints a command to
accept the symbol diff. This command needs to include the
--define=compile flag to ensure the diff is applied in the same
compile mode as the test was run.
PR Close#24677
This will allow RouterTestingModule to better support lazy loading of modules
when using summaries, since it can detect whether a module is already loaded
if it can access the id.
PR Close#24258
`NgForOf` used to implement `OnChanges` and than use
`ngOnChanges` callback to detect when `ngForOf` binding
changed to update the differ. We now do the checking
manually which puts less pressure on the runtime to do
the bookkeeping and should result in minor perf improvement.
PR Close#23378
Allows to write:
const fixture = TestBed
.overridePipe(DisplayNamePipe, { set: { pure: false } })
.createComponent(MenuComponent);
when you only want to set the `pure` metadata,
instead of currently:
const fixture = TestBed
.overridePipe(DisplayNamePipe, { set: { name: 'displayName', pure: false } })
.createComponent(MenuComponent);
which forces you to redefine the name of the pipe even if it is useless.
Fixes#24102
PR Close#24103
Bazel has a restriction that a single output (eg. a compiled version of
//packages/common) can only be produced by a single rule. This precludes
the Angular repo from having multiple rules that build the same code. And
the complexity of having a single rule produce multiple outputs (eg. an
ngc-compiled version of //packages/common and an Ivy-enabled version) is
too high.
Additionally, the Angular repo has lots of existing tests which could be
executed as-is under Ivy. Such testing is very valuable, and it would be
nice to share not only the code, but the dependency graph / build config
as well.
Thus, this change introduces a --define flag 'compile' with three potential
values. When --define=compile=X is set, the entire build system runs in a
particular mode - the behavior of all existing targets is controlled by
the flag. This allows us to reuse our entire build structure for testing
in a variety of different manners. The flag has three possible settings:
* legacy (the default): the traditional View Engine (ngc) build
* local: runs the prototype ngtsc compiler, which does not rely on global
analysis
* jit: runs ngtsc in a mode which executes tsickle, but excludes the
Angular related transforms, which approximates the behavior of plain
tsc. This allows the main packages such as common to be tested with
the JIT compiler.
Additionally, the ivy_ng_module() rule still exists and runs ngc in a mode
where Ivy-compiled output is produced from global analysis information, as
a stopgap while ngtsc is being developed.
PR Close#24056
Since `versionedFiles` behaves in the exact same way as `files`, there
is no reaason to have both. Users should use `files` instead.
This commit deprecates the property and prints a warning when coming
across an asset-group that uses it. It should be completely removed in
a future version.
Note, it has also been removed from the default `ngsw-config.json`
template in angular/devkit#754.
PR Close#23584
This commit adds a new compiler pipeline that isn't dependent on global
analysis, referred to as 'ngtsc'. This new compiler is accessed by
running ngc with "enableIvy" set to "ngtsc". It reuses the same initialization
logic but creates a new implementation of Program which does not perform the
global-level analysis that AngularCompilerProgram does. It will be the
foundation for the production Ivy compiler.
PR Close#23455
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an opaque token.
For this reson why declare the return value of `defineInjectable` as `never`.
PR Close#23383
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an `OpaqueToken`.
By prefixing the type with `ɵ` we are communicating the the outside world that
the value is not public API and is subject to change without backward compatibility.
PR Close#23371
- Remove default injection value from `inject` / `directiveInject` since
it is not possible to set using annotations.
- Module `Injector` is stored on `LView` instead of `LInjector` data
structure because it can change only at `LView` level. (More efficient)
- Add `ngInjectableDef` to `IterableDiffers` so that existing tests can
pass as well as enable `IterableDiffers` to be injectable without
`Injector`
PR Close#23345
This change changes:
- compiler uses `directiveInject` instead of `inject` for `Directive`s
- unifies the flags in `di` as well as `render3`
- changes the signature of `directiveInject` to match `inject` In prep for #23330
- compiler now generates flags for injection.
Compiler portion of #23342
Prep for #23330
PR Close#23345
The ServiceWorker will redirect navigation requests that don't match any
`asset` or `data` group to the specified index file. The rules for a
request to be classified as a navigation request are as follows:
1. Its `mode` must be `navigation`.
2. It must accept a `text/html` response.
3. Its URL must match certain criteria (see below).
By default, a navigation request can have any URL except for:
1. URLs containing `__`.
2. URLs to files (i.e. containing a file extension in the last path
segment).
While these rules are fine in many cases, sometimes it is desirable to
configure different rules for the URLs of navigation requests (e.g.
ignore specific URLs and pass them through to the server).
This commit adds support for specifying an optional `navigationUrls`
list in `ngsw-config.json`, which contains URLs or simple globs
(currently only recognizing `!`, `*` and `**`).
Only requests whose URLs match any of the positive URLs/patterns and
none of the negative ones (i.e. URLs/patterns starting with `!`) will be
considered navigation requests (and handled accordingly by the SW).
(This is an alternative implementation to #23025.)
Fixes#20404
PR Close#23339
CLI will soon consider the first entry to be the main entry in the package group.
This will then be used to display the main entry in "ng update" listing.
PR Close#23303
Previously, it was necessary to attach on of the three "stability"
jsdoc tags (`@stable`, `@deprecated` or `@experimental`) to each
public API export.
To ensure that the public API was correctly tagged, the `ts-api-guardian`
would check that one of these tags appeared on every public export.
Now the doc-gen is able to compute that a code item is stable if
it does not contain the `@experimental` nor `@deprecated` tags.
Therefore there is no need to provide the `@stable` tag any more; and
this tag has now been marked as deprecated - i.e. it should not be used.
The ts-api-guardian has been modified in this commit so that it no longer
warns/fails if the `@stable` is missing.
PR Close#23176
This avoids the need to run bazel run :install instead of yarn install.
We merge the devDependencies of ts-api-guardian into the root package.json file.
PR Close#22894
I added this option for demos, so that it would be easier to see a graphviz graph of the dependency structure without all the node_modules edges.
However, `ibazel` picks up this option as well, and means it doesn't trigger on changes that only appear through an implicit dependency.
PR Close#22912
Using `-—define` causes bazel to bust the cache which means that doing
`bazel test target` followed by `bazel run -—define UPDATE_GOLDEN=1 target` will
cause caches to be invalidated and house full rebuild.
PR Close#22913
This lets projects like Material change ng_package "bundle index" files to non-conflicting paths
Currently packages like @angular/core ship with the generated metadata
in a path like 'core.js' which overwrites one of the inputs.
Angular material puts the generated file in a path like 'index.js'
Either way these files generated by ng_module rules have the potential
to collide with inputs given by the user, which results in an error.
Instead, give users the freedom to choose a different non-conflicting name.
Also this refactors the ng_package rule, removing the redundant
secondary_entry_points attribute.
Instead, we assume that any ng_module in the deps with a module_name
attribute is a secondary entry point.
PR Close#22814
This adds compilation of @NgModule providers and imports into
ngInjectorDef statements in generated code. All @NgModule annotations
will be compiled and the @NgModule decorators removed from the
resultant js output.
All @Injectables will also be compiled in Ivy mode, and the decorator
removed.
PR Close#22458
BREAKING CHANGE:
The `<template>` tag was deprecated in Angular v4 to avoid collisions (i.e. when
using Web Components).
This commit removes support for `<template>`. `<ng-template>` should be used
instead.
BEFORE:
<!-- html template -->
<template>some template content</template>
# tsconfig.json
{
# ...
"angularCompilerOptions": {
# ...
# This option is no more supported and will have no effect
"enableLegacyTemplate": [true|false]
}
}
AFTER:
<!-- html template -->
<ng-template>some template content</ng-template>
PR Close#22783
Angular Package Format v6 stops bundling files in the esm5 and esm2015
directories, now that Webpack 4 can tree-shake per-file.
Adds some missing files like package.json to make packages closer to
what we publish today.
Refactor ng_package to be a type of npm_package and re-use the packaging
action from that rule.
PR Close#22782
This patch removes the deprecated support for animation
symbol imports from @angular/core.
BREAKING CHANGE: it is no longer possible to import
animation-related functions from @angular/core. All
animation symbols must now be imported from @angular/animations.
PR Close#22692
Allow passing an optional timeout to Testability's whenStable(). If
specified, if Angular is not stable before the timeout is hit, the
done callback will be invoked with a list of pending macrotasks.
Also, allows an optional update callback, which will be invoked whenever
the set of pending macrotasks changes. If this callback returns true,
the timeout will be cancelled and the done callback will not be invoked.
If the optional parameters are not passed, whenStable() will work
as it did before, whether or not the task tracking zone spec is
available.
This change also migrates the Testability unit tests off the deprecated
AsyncTestCompleter.
PR Close#16863
Rename @Injectable({scope -> providedIn}).
Instead of {providedIn: APP_ROOT_SCOPE}, accept {providedIn: 'root'}.
Also, {providedIn: null} implies the injectable should not be added
to any scope.
PR Close#22655
We now create npm packages to cover all the public api assertions in tools/public_api_guard.
We no longer depend on ts-api-guardian from npm - it is now stale since the repository was archived.
There is no longer a gulp task to enforce or accept the public API, this is in CircleCI as part of running all bazel test targets.
PR Close#22639
Support for using the `ngModel` input property and `ngModelChange`
event with reactive form directives has been deprecated in
Angular v6 and will be removed in Angular v7.
Now deprecated:
```html
<input [formControl]="control" [(ngModel)]="value">
```
```ts
this.value = 'some value';
```
This has been deprecated for a few reasons. First, developers have
found this pattern confusing. It seems like the actual `ngModel`
directive is being used, but in fact it's an input/output property
named `ngModel` on the reactive form directive that simply approximates
(some of) its behavior. Specifically, it allows getting/setting the
value and intercepting value events. However, some of `ngModel`'s other
features - like delaying updates with`ngModelOptions` or exporting the
directive - simply don't work, which has understandably caused some
confusion.
In addition, this pattern mixes template-driven and reactive forms
strategies, which we generally don't recommend because it doesn't take
advantage of the full benefits of either strategy. Setting the value in
the template violates the template-agnostic principles behind reactive
forms, whereas adding a FormControl/FormGroup layer in the class removes
the convenience of defining forms in the template.
To update your code before v7, you'll want to decide whether to stick
with reactive form directives (and get/set values using reactive forms
patterns) or switch over to template-driven directives.
After (choice 1 - use reactive forms):
```html
<input [formControl]="control">
```
```ts
this.control.setValue('some value');
```
After (choice 2 - use template-driven forms):
```html
<input [(ngModel)]="value">
```
```ts
this.value = 'some value';
```
You can also choose to silence this warning by providing a config for
`ReactiveFormsModule` at import time:
```ts
imports: [
ReactiveFormsModule.withConfig({warnOnNgModelWithFormControl: 'never'});
]
```
Alternatively, you can choose to surface a separate warning for each
instance of this pattern with a config value of `"always"`. This may
help to track down where in the code the pattern is being used as the
code is being updated.
Note: `warnOnNgModelWithFormControl` is set up as deprecated so that it
can be removed in v7 when it is no longer needed. This will not display
properly in API docs yet because dgeni doesn't yet support deprecating
properties in object literals, but we have an open issue to resolve the
discrepancy here: https://github.com/angular/angular/issues/22640.
PR Close#22633
Also use it to test the public API for core and common
Once we have an ng_package for every package, we can remove
the npm dependency on ts-api-guardian and the gulp-based
public api check.
PR Close#22544
inject() supports the ngInjectableDef-based configuration of the injector
(otherwise known as tree-shakeable services). It was missing from the
exported API of @angular/core, this PR adds it.
The test added here is correct in theory, but may pass accidentally due
to the decorator side-effect replacing the inject() call at runtime. An
upcoming compiler PR will strip reified decorators from the output
entirely.
Fixes#22388
PR Close#22389
The utility functions `formatNumber`, `formatPercent`, `formatCurrency`, and `formatDate` used by the number, percent, currency and date pipes are now available for developers who want to use them outside of templates.
Fixes#20536
PR Close#22423
This produces a directory following the Angular Package layout spec.
Includes integration test coverage by making a minimal ng_package in integration/bazel.
Unit tests verify the content of the @angular/core and @angular/common packages.
This doesn't totally match our current output, but is good enough to unblock some
early adopters.
It re-uses logic from the rollup_bundle rule in rules_nodejs. It should also
eventually have the .pack and .publish secondary targets like npm_package rule.
PR Close#22221
This patch removes the need to include the Web Animations API Polyfill
(web-animations-js) as a dependency. Angular will now fallback to using
CSS Keyframes in the event that `element.animate` is no longer supported
by the browser.
In the event that an application does use `AnimationBuilder` then the
web-animations-js polyfill is required to enable programmatic,
position-based access to an animation.
Closes#17496
PR Close#22143
closes#17958
BREAKING CHANGE:
- `AbstractControl#statusChanges` now emits an event of `'PENDING'` when you call `AbstractControl#markAsPending`
- Previously it did not emit an event when you called `markAsPending`
- To migrate you would need to ensure that if you are filtering or checking events from `statusChanges` that you account for the new event when calling `markAsPending`
PR Close#20212
This patch ensures that if the NoopAnimationsModule is used then it will
correctly report the associated `totalTime` property within the emitted
AnimationEvent instance when an animation event trigger is fired.
BREAKING CHANGE: When animation is trigged within a disabled zone, the
associated event (which an instance of AnimationEvent) will no longer
report the totalTime as 0 (it will emit the actual time of the
animation). To detect if an animation event is reporting a disabled
animation then the `event.disabled` property can be used instead.
PR Close#22225
InjectionToken can be created with an ngInjectableDef, and previously
this allowed the full expressiveness of @Injectable. However, this
requires a runtime reflection system in order to generate factories
from expressed provider declarations.
Instead, this change requires scoped InjectionTokens to provide the
factory directly (likely using inject() for the arguments), bypassing
the need for a reflection system.
Fixes#22205
PR Close#22207
@Injectable() supports a scope parameter which specifies the target module.
However, it's still difficult to specify that a particular service belongs
in the root injector. A developer attempting to ensure that must either
also provide a module intended for placement in the root injector or target
a module known to already be in the root injector (e.g. BrowserModule).
Both of these strategies are cumbersome and brittle.
Instead, this commit adds a token APP_ROOT_SCOPE which provides a
straightforward way of targeting the root injector directly, without
requiring special knowledge of modules within it.
PR Close#22185
This should cause Bazel builds to be incremental, only re-building parts of Angular affected by changes since the last build.
It also fixes a potential version skew, where CI was running the Bazel linter binaries in the ngcontainer docker image, but developers built them using the versions in WORKSPACE
PR Close#21784
The AsyncPipe type signature was changed to allow
deferred creation of promises and observalbes that
is supported by the implementation by allowing
`Promise<T>|null|undefined` and by allowing
`Observable<T>|null|undefined`.
PR Close#22169
This commit bundles 3 important changes, with the goal of enabling tree-shaking
of services which are never injected. Ordinarily, this tree-shaking is prevented
by the existence of a hard dependency on the service by the module in which it
is declared.
Firstly, @Injectable() is modified to accept a 'scope' parameter, which points
to an @NgModule(). This reverses the dependency edge, permitting the module to
not depend on the service which it "provides".
Secondly, the runtime is modified to understand the new relationship created
above. When a module receives a request to inject a token, and cannot find that
token in its list of providers, it will then look at the token for a special
ngInjectableDef field which indicates which module the token is scoped to. If
that module happens to be in the injector, it will behave as if the token
itself was in the injector to begin with.
Thirdly, the compiler is modified to read the @Injectable() metadata and to
generate the special ngInjectableDef field as part of TS compilation, using the
PartialModules system.
Additionally, this commit adds several unit and integration tests of various
flavors to test this change.
PR Close#22005
This is a customization of the rollup_bundle rule from rules_nodejs
which adds the build-optimizer as a plugin.
Add a functional test with fast round-trip that asserts the minified app
still works.
Publish the min.js artifact on circleCI so we can track its size.
PR Close#22004
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
- Improve `WrappedValue` by adding `unwrap` symetrical to `wrap`.
- remove dead code - `ValueUnwrapper`
The property `wrapped` is an implementation details and should never be accessed
directly - use `unwrap(wrappedValue)`. Will change to protected in Angular 7.
PR Close#20997
This helps ensure we use the same tsconfig.json file for all compilations.
Next steps are to make it the same tsconfig.json file used by the editor
PR Close#20964
- Add tests target for `test`, `test_node_only` and `test_web` in `core` package.
- Created a `_testing_init` pseudo package where bootstrap code for tests is kept.
- Moved `source_map_util` from `test` to `testing` so to prevent circular dependency.
- Removed `visibility:public` for testing `BUILD` packages.
PR Close#21053
Previously, the router would merge path and matrix params, as well as
data/resolve, with special rules (only merging down when the route has
an empty path, or is component-less). This change adds an extra option
"paramsInheritanceStrategy" which, when set to 'always', makes child
routes unconditionally inherit params from parent routes.
Closes#20572.
Allows a directive to use the expression passed directly to a property
as a guard instead of filtering the type through a type expression.
This more accurately matches the intent of the ngIf usage of its template
enabling better type inference.
Moved NgIf to using this type of guard instead of a function guard.
Closes: #20967
I originally added this when I was trying to build `//packages/core`, which is not what users will do often.
This makes it harder for team members to understand what Bazel is doing. I find myself suggesting to turn it off, so it's better to just remove it.
PR Close#20943
Structural directives can now specify a type guard that describes
what types can be inferred for an input expression inside the
directive's template.
NgIf was modified to declare an input guard on ngIf.
After this change, `fullTemplateTypeCheck` will infer that
usage of `ngIf` expression inside it's template is truthy.
For example, if a component has a property `person?: Person`
and a template of `<div *ngIf="person"> {{person.name}} </div>`
the compiler will no longer report that `person` might be null or
undefined.
The template compiler will generate code similar to,
```
if (NgIf.ngIfTypeGuard(instance.person)) {
instance.person.name
}
```
to validate the template's use of the interpolation expression.
Calling the type guard in this fashion allows TypeScript to infer
that `person` is non-null.
Fixes: #19756?
PR Close#20702
Add enough BUILD files to make it possible to
`bazel build packages/core/test`
Also re-format BUILD.bazel files with Buildifier.
Add a CI lint check that they stay formatted.
PR Close#20768
Currently a bug exists where attempting to inject SwPush crashes the
application if Service Workers are unsupported. This happens because
SwPush doesn't properly detect that navigator.serviceWorker isn't
set.
This change ensures that all passive observation of SwPush and
SwUpdate doesn't cause crashes, and that calling methods to perform
actions on them results in rejected Promises. It's up to applications
to detect when those services are not available, and refrain from
attempting to use them.
To that end, this change also adds an `isSupported` getter to both
services, so users don't have to rely on feature detection directly
with browser APIs. Currently this simply detects whether the SW API
is present, but in the future it will be expanded to detect whether
a particular browser supports specific APIs (such as push
notifications, for example).
Currently, the way to not use the SW is to not install its module.
However, this means that you can't inject any of its services.
This change adds a ServiceWorkerModule.disabled() MWP, that still
registers all of the right providers but acts as if the browser does
not support Service Workers.
- update to TypeScript 2.5
- point the 2.4 typings test at the previous typescript version, so we
don't break it accidentally
- widen the peerDeps from Angular packages that depend on TypeScript
- update to latest TypeScript 2.5 compatible Bazel rules
- move .bazelrc to tools/bazel.rc per https://docs.bazel.build/versions/master/best-practices.html#bazelrc
PR Close#20175
This allows to overwrite templates for JIT and AOT components alike.
In contrast to `TestBed.overrideTemplate`, the template is compiled
in the context of the testing module, allowing to use other testing
directives.
Closes#19815
This PR was merged without API docs and general rollout plan.
We can't release this as is in 5.1 without a plan for documentation, cli integration, etc.
We use the globally installed yarn now. The local yarn was used in
`check-environment.js` only, which results in the `--integrity` check
always failing (if dependencies were installed with the global yarn).
Right now HEAD and 5.0.x have a branch deviation and therefore
all the commits between both branches are being compared. There
exists a problematic commit which has a commit message that is
longer than 100 commits. This patch will temporarily increase
the limit to 120 so that CI passes. Once master is resumed to
being the primary development branch (once 5.0.0 is out) then
the the msg limit will be set back to 100.
This allows use to fix `TestBed.overrideProvider` to keep imported `NgModule`s eager,
while allowing our users to still keep the old semantics until they have fixed their
tests.
PR Close#19558
This commit fixes several issues discovered through use in real apps.
* The sha1() function operated on text content, causing issues for binary-format files.
A sha1Binary() function which operates on unparsed data now avoids any encoding issues.
* The characters '?' and '+' were not escaped in Glob-to-regex conversion previously, but
are now.
* URLs from the browser contain the full origin, but were checked against the table of
hashes from the manifest which only has the path for URLs from the same origin. Now the
origin is checked and URLs are relativized to the domain root before comparison if
appropriate.
* ngsw: prefix was missing from data groups, is now added.
* Occasionally servers will return a redirected response for an asset, and caching it could
cause errors for navigation requests. The SW now handles this by detecting such responses
and following the redirect manually, to avoid caching a redirected response.
* The request for known assets is now created from scratch from the URL before fetching from
the network, in order to sanitize it and avoid carrying any special modes or headers that
might result in opaque responses.
* Debugging log for troubleshooting.
* Avoid creating errors by returning 504 responses on error.
* Fix bug where idle queue doesn't run in some circumstances.
* Add tests for the above.
This service worker is a conceptual derivative of the existing @angular/service-worker maintained at github.com/angular/mobile-toolkit, but has been rewritten to support use across a much wider variety of applications.
Entrypoints include:
@angular/service-worker: a library for use within Angular client apps to communicate with the service worker.
@angular/service-worker/gen: a library for generating ngsw.json files from glob-based SW config files.
@angular/service-worker/ngsw-worker.js: the bundled service worker script itself.
@angular/service-worker/ngsw-cli.js: a CLI tool for generating ngsw.json files from glob-based SW config files.
This is necessary to enable type-based optimizations with Closure.
Without explicity making these options the same named type, Closure
thinks they are different types and cannot disambiguate the `fromObject`
property.
TransferState provides a shared store that is transferred from the
server to client. To use it import BrowserTransferStateModule from the
client app module and ServerTransferStateModule from the server app
module and TransferState will be available as an Injectable object.
PR Close#19134
With this commit `ngc` is used instead of `tsc-wrapped` for
collecting metadata and tsickle rewriting and `tsc-wrapped`
is removed from the repository.
`@angular/tsc-wrapped@5` is now deprecated and is no longer
used, updated, or maintained as part as of Angular 5.x.x.
`@angular/tsc-wrapped@4` is still maintained and required by
Angular 4.x.x and will be maintained as long as 4.x.x is in
LTS.
PR Close#19298
The private classes `ApplicationRef_`, `PlatformRef_`, `JSONPConnection_`, `JSONPBackend_`, `ClientMessageBrokerFactory_`, `ServiceMessageBroker_`, `ClientMessageBroker_` and `ServiceMessageBrokerFactory_` have been removed and merged into their public equivalents.
The size of the minified umd bundles have been slightly decreased:
| package | before | after |
| -------------------|------------|------------|
| core | 217.791 kb | 217.144 kb |
| http | 33.260 kb | 32.838 kb |
| platform-webworker | 56.015 kb | 54.933 kb |
PR Close#19143
- temporarily keeps the old sources under packages/tsc-wrapped
until the build scripts are changed to use compiler-cli everywhere.
- removes the compiler options `disableTransformerPipeline` that was introduced
in a previous beta of Angular 5, i.e. the transformer based compiler
is now always enabled.
PR Close#18966
Add testability hook to downgraded component so that protractor can wait for asynchronous call to complete.
Add unregisterApplication() and unregisterAllApplications() to testability registry for cleaning up testability and unit test.
A multi RENDER_MODULE_HOOK provider can provide function that will be called with the current document just before the document is rendered to
string.
This hook can for example be used for the state transfer module to serialize any server state that needs to be transported to the client, just before the current platform state is rendered to string.
PR Close#19023
* The problem was with the `fireChildActivationStart` function. It was taking a `path` param, which was an
array of `ActivatedRouteSnapshot`s. The function was being fired for each piece of the route that was being
activated. This resulted in far too many `ChildActivationStart` events being fired, and being fired on routes
that weren't actually getting activated. This change fires the event only for those routes that are actually
being activated.
fixes#18942
PR Close#19043
* Introduced with #18407, `RouteEvents` don't actually have a common constructor. Reverting here to be able to add new functionality to ChildActivation events.
PR Close#19043
* Remove now unnecessary portions of build.
* Add a compilePackageES5 method to build ES5 from sources
* Rework all package.json and rollup config files to new format
* Remove "extends" from tsconfig-build.json files and fixup compilation roots
PR Close#18541
Fixes#14638
Uses Domino - https://github.com/fgnass/domino and removes dependency on
Parse5.
The DOCUMENT and nativeElement were never typed earlier and were
different on the browser(DOM nodes) and the server(Parse5 nodes). With
this change, platform-server also exposes a DOCUMENT and nativeElement
that is closer to the client. If you were relying on nativeElement on
the server, you would have to change your code to use the DOM API now
instead of Parse5 AST API.
Removes the need to add services for each and every Document
manipulation like Title/Meta etc.
This does *not* provide a global variable 'document' or 'window' on the
server. You still have to inject DOCUMENT to get the document backing
the current platform server instance.
Today, constructing a new GET request with headers looks like:
const headers = new HttpHeaders({
'My-Header': 'header value',
});
http.get('/url', {headers}).subscribe(...);
This indirection is unnecessary. It'd be more ergonomic to write:
http.get('/url', {headers: {'My-Header': 'header value'}}).subscribe(...);
This commit allows that new syntax, both for HttpHeaders and HttpParams.
In the HttpParams case it also allows construction of HttpParams with a map.
PR Close#18490
BREAKING CHANGE: `RouterOutlet` properties `locationInjector` and `locationFactoryResolver` have been removed as they were deprecated since v4.
PR Close#18781
BREAKING CHANGE: Because of multiple bugs and browser inconsistencies, we have dropped the intl api in favor of data exported from the Unicode Common Locale Data Repository (CLDR).
Unfortunately we had to change the i18n pipes (date, number, currency, percent) and there are some breaking changes.
1. I18n pipes
* Breaking change:
- By default Angular now only contains locale data for the language `en-US`, if you set the value of `LOCALE_ID` to another locale, you will have to import new locale data for this language because we don't use the intl API anymore.
* Features:
- you don't need to use the intl polyfill for Angular anymore.
- all i18n pipes now have an additional last parameter `locale` which allows you to use a specific locale instead of the one defined in the token `LOCALE_ID` (whose value is `en-US` by default).
- the new locale data extracted from CLDR are now available to developers as well and can be used through an API (which should be especially useful for library authors).
- you can still use the old pipes for now, but their names have been changed and they are no longer included in the `CommonModule`. To use them, you will have to import the `DeprecatedI18NPipesModule` after the `CommonModule` (the order is important):
```ts
import { NgModule } from '@angular/core';
import { CommonModule, DeprecatedI18NPipesModule } from '@angular/common';
@NgModule({
imports: [
CommonModule,
// import deprecated module after
DeprecatedI18NPipesModule
]
})
export class AppModule { }
```
Dont forget that you will still need to import the intl API polyfill if you want to use those deprecated pipes.
2. Date pipe
* Breaking changes:
- the predefined formats (`short`, `shortTime`, `shortDate`, `medium`, ...) now use the patterns given by CLDR (like it was in AngularJS) instead of the ones from the intl API. You might notice some changes, e.g. `shortDate` will be `8/15/17` instead of `8/15/2017` for `en-US`.
- the narrow version of eras is now `GGGGG` instead of `G`, the format `G` is now similar to `GG` and `GGG`.
- the narrow version of months is now `MMMMM` instead of `L`, the format `L` is now the short standalone version of months.
- the narrow version of the week day is now `EEEEE` instead of `E`, the format `E` is now similar to `EE` and `EEE`.
- the timezone `z` will now fallback to `O` and output `GMT+1` instead of the complete zone name (e.g. `Pacific Standard Time`), this is because the quantity of data required to have all the zone names in all of the existing locales is too big.
- the timezone `Z` will now output the ISO8601 basic format, e.g. `+0100`, you should now use `ZZZZ` to get `GMT+01:00`.
| Field type | Format | Example value | v4 | v5 |
|------------|---------------|-----------------------|----|---------------|
| Eras | Narrow | A for AD | G | GGGGG |
| Months | Narrow | S for September | L | MMMMM |
| Week day | Narrow | M for Monday | E | EEEEE |
| Timezone | Long location | Pacific Standard Time | z | Not available |
| Timezone | Long GMT | GMT+01:00 | Z | ZZZZ |
* Features
- new predefined formats `long`, `full`, `longTime`, `fullTime`.
- the format `yyy` is now supported, e.g. the year `52` will be `052` and the year `2017` will be `2017`.
- standalone months are now supported with the formats `L` to `LLLLL`.
- week of the year is now supported with the formats `w` and `ww`, e.g. weeks `5` and `05`.
- week of the month is now supported with the format `W`, e.g. week `3`.
- fractional seconds are now supported with the format `S` to `SSS`.
- day periods for AM/PM now supports additional formats `aa`, `aaa`, `aaaa` and `aaaaa`. The formats `a` to `aaa` are similar, while `aaaa` is the wide version if available (e.g. `ante meridiem` for `am`), or equivalent to `a` otherwise, and `aaaaa` is the narrow version (e.g. `a` for `am`).
- extra day periods are now supported with the formats `b` to `bbbbb` (and `B` to `BBBBB` for the standalone equivalents), e.g. `morning`, `noon`, `afternoon`, ....
- the short non-localized timezones are now available with the format `O` to `OOOO`. The formats `O` to `OOO` will output `GMT+1` while the format `OOOO` will be `GMT+01:00`.
- the ISO8601 basic time zones are now available with the formats `Z` to `ZZZZZ`. The formats `Z` to `ZZZ` will output `+0100`, while the format `ZZZZ` will be `GMT+01:00` and `ZZZZZ` will be `+01:00`.
* Bug fixes
- the date pipe will now work exactly the same across all browsers, which will fix a lot of bugs for safari and IE.
- eras can now be used on their own without the date, e.g. the format `GG` will be `AD` instead of `8 15, 2017 AD`.
3. Currency pipe
* Breaking change:
- the default value for `symbolDisplay` is now `symbol` instead of `code`. This means that by default you will see `$4.99` for `en-US` instead of `USD4.99` previously.
* Deprecation:
- the second parameter of the currency pipe (`symbolDisplay`) is no longer a boolean, it now takes the values `code`, `symbol` or `symbol-narrow`. A boolean value is still valid for now, but it is deprecated and it will print a warning message in the console.
* Features:
- you can now choose between `code`, `symbol` or `symbol-narrow` which gives you access to more options for some currencies (e.g. the canadian dollar with the code `CAD` has the symbol `CA$` and the symbol-narrow `$`).
4. Percent pipe
* Breaking change
- if you don't specify the number of digits to round to, the local format will be used (and it usually rounds numbers to 0 digits, instead of not rounding previously), e.g. `{{ 3.141592 | percent }}` will output `314%` for the locale `en-US` instead of `314.1592%` previously.
Fixes#10809, #9524, #7008, #9324, #7590, #6724, #3429, #17576, #17478, #17319, #17200, #16838, #16624, #16625, #16591, #14131, #12632, #11376, #11187
PR Close#18284
BREAKING CHANGE: `NgFor` has been removed as it was deprecated since v4. Use `NgForOf` instead. This does not impact the use of`*ngFor` in your templates.
PR Close#18758
BREAKING CHANGE: `NgTemplateOutlet#ngOutletContext` has been removed as it was deprecated since v4. Use `NgTemplateOutlet#ngTemplateOutletContext` instead.
PR Close#18780
BREAKING CHANGE: `DifferFactory.create` no longer takes ChangeDetectionRef as a first argument as it was not used and deprecated since v4.
PR Close#18757
BREAKING CHANGE: `NgProbeToken` has been removed from `@angular/platform-browser` as it was deprecated since v4. Import it from `@angular/core` instead.
PR Close#18760
This commit introduces a new Input property called
`ngFormOptions` to the `NgForm` directive. You can use it
to set default `updateOn` values for all the form's child
controls. This default will be used unless the child has
already explicitly set its own `updateOn` value in
`ngModelOptions`.
Potential values: `change` | `blur` | `submit`
```html
<form [ngFormOptions]="{updateOn: blur}">
<input name="one" ngModel> <!-- will update on blur-->
</form>
```
For more context, see [#18577](https://github.com/angular/angular/pull/18577).
toString() from DefaultIterableDiffer is only used in tests and should not
be part of the production code. toString() methods from differs add
~ 0.3KB (min+gzip) to the production bundle size.
This commit introduces a new option to template-driven forms that
improves performance by delaying form control updates until the
"blur" or "submit" event. To use it, set the `updateOn` property
in `ngModelOptions`.
```html
<input ngModel [ngModelOptions]="{updateOn: blur}">
```
Like in AngularJS, setting `updateOn` to `blur` or `submit` will
delay the update of the value as well as the validation status.
Updating value and validity together keeps the system easy to reason
about, as the two will always be in sync. It's also worth noting
that the value/validation pipeline does still run when the form is
initialized (in order to support initial values).
Upcoming PRs will address:
* Support for setting group-level `updateOn` in template-driven forms
* Option for skipping initial validation run or more global error
display configuration
* Better support of reactive validation strategies
See more context in #18408, #18514, and the [design doc](https://docs.google.com/document/d/1dlJjRXYeuHRygryK0XoFrZNqW86jH4wobftCFyYa1PA/edit#heading=h.r6gn0i8f19wz).
BREAKING CHANGE
It is no longer possible to declare classes in this format.
```
Component({...}).
Class({
constructor: function() {...}
})
```
This format would only work with JIT and with ES5. This mode doesn’t
allow build tools like Webpack to process and optimize the code, which
results in prohibitively large bundles. We are removing this API
because we are trying to ensure that everyone is on the fast path by
default, and it is not possible to get on the fast path using the ES5
DSL. The replacement is to use TypeScript and `@Decorator` format.
```
@Component({...})
class {
constructor() {...}
}
```
The source map does not currently work with the transformer pipeline.
It will be re-enabled after TypeScript 2.4 is made the min version.
To revert to the former compiler, use the `disableTransformerPipeline` in
tsconfig.json:
```
{
"angularCompilerOptions": {
"disableTransformerPipeline": true
}
}
```
This commit adds support for setting default `updateOn` values
in `FormGroups` and `FormArrays`. If you set `updateOn` to
’blur’` at the group level, all child controls will default to `’blur’`,
unless the child has explicitly specified a different `updateOn` value.
```
const c = new FormGroup({
one: new FormControl()
}, {updateOn: blur});
```
It's worth noting that parent groups will always update their value and
validity immediately upon value/validity updates from children. In other
words, if a group is set to update on blur and its children are individually
set to update on change, the group will still update on change with its
children; its default value will simply not be used.
Igor Minar
Greg Magolan
Miško Hevery
Alex Eagle
Pete Bacon Darwin
George Kalpakas
Manduro
Alex Rickabaugh
Alex Eagle
Brandon Roberts
Alan Agius
Wei Huang
Wassim Chegham
Vikram Subramanian
Filipe Silva
Rob Wormald
Marcus Krahl
Victor Berchet
Judy Bogart
Kara Erickson
Roope Hakulinen
Paul Gschwendtner
mhartington
Marc Laval
Adrien Samson
Jason Aden
sergeome
Olivier Combe
Fabian Wiles
Victor Savkin
Jeremy Elbourn
cexbrayat
Matias Niemelä
Rafael
Joey Perrott
Andrew Seguin
Michael Giambalvo
Chuck Jazdzewski
JiaLi.Passion
harunurhan
Trotyl
vsavkin
Oussama Ben Brahim
Zaven Muradyan
Wilgert Velinga
Tobias Bosch
Igor Minar
Hans Larsen
tinayuangao
Jeremy Elbourn
Vikram Subramanian
Yi Qi
Pawel Kozlowski
Kara