This commit relaxes the type of the `formControlName` input to accept both a `string` and a `number`.
Currently, when using a `FormArray`, most templates look like:
```
<div formArrayName="tags">
<div *ngFor="let tag of tagsArray.controls; index as i">
<input [formControlName]="i">
</div>
</div>
```
Here `formControlName` receives a number whereas its input type is a string.
This is fine for VE and `fullTemplateTypeCheck`, but not for Ivy which does a more thorough type checking on inputs with `fullTemplateTypeCheck` enabled and throws `Type 'number' is not assignable to type 'string'`. It is fixable by using `formControlName="{{i}}"` but you have to know the difference between `a="{{b}}"` and `[a]="b"` and change it all over the application codebase. This commit allows the existing code to still type-check.
PR Close#30606
Historically, we've cleaned Ivy commits out of the CHANGELOG because
Ivy was not available except as a preview. Given that Ivy will soon
be the default in 9.0.0, it no longer makes sense to remove the Ivy
commits from the log. This changes the gulp changelog task so that
Ivy commits are included by default.
PR Close#32114
Previously, `validate-commit-message` would treat `fixup! `-prefixed
commits like this:
- It would strip the `fixup! ` prefix.
- It would validate the rest of the commit message header as any other
commit.
However, fixup commits are special in that they need to exactly match an
earlier commit message header (sans the `fixup! ` prefix) in order for
git to treat them correctly. Otherwise, they will not be squashed into
the original commits and will be merged as is. Fixup commits can end up
not matching their original commit for several reasons (e.g. accidental
typo, changing the original commit message, etc.).
This commit prevents invalid fixup commits to pass validation by
ensuring that they match an earlier (unmerged) commit (i.e. a commit
between the current HEAD and the BASE commit).
NOTE: This new behavior is currently not activated in the pre-commit git
hook, that is used to validate commit messages (because the
preceding, unmerged commits are not available there). It _is_
activated in `gulp validate-commit-message`, which is run as part
of the `lint` job on CI and thus will detect invalid commits,
before their getting merged.
PR Close#32023
While `fixup! ` is fine, `squash! ` means that the commit message needs
tweaking, which cannot be done automatically during merging (i.e. it
should be done by the PR author).
Previously, `validate-commit-message` would always allow
`squash! `-prefixed commits, which would cause problems during merging.
This commit changes `validate-commit-message` to make it configurable
whether such commits are allowed and configures the
`gulp validate-commit-message` task, which is run as part of the `lint`
job on CI, to not allow them.
NOTE: This new check is disabled in the pre-commit git hook that is used
to validate commit messages, because these commits might still be
useful during development.
PR Close#32023
In Angular today, the following pattern works:
```typescript
export class BaseDir {
constructor(@Inject(ViewContainerRef) protected vcr: ViewContainerRef) {}
}
@Directive({
selector: '[child]',
})
export class ChildDir extends BaseDir {
// constructor inherited from BaseDir
}
```
A decorated child class can inherit a constructor from an undecorated base
class, so long as the base class has metadata of its own (for JIT mode).
This pattern works regardless of metadata in AOT.
In Angular Ivy, this pattern does not work: without the @Directive
annotation identifying the base class as a directive, information about its
constructor parameters will not be captured by the Ivy compiler. This is a
result of Ivy's locality principle, which is the basis behind a number of
compilation optimizations.
As a solution, @Directive() without a selector will be interpreted as a
"directive base class" annotation. Such a directive cannot be declared in an
NgModule, but can be inherited from. To implement this, a few changes are
made to the ngc compiler:
* the error for a selector-less directive is now generated when an NgModule
declaring it is processed, not when the directive itself is processed.
* selector-less directives are not tracked along with other directives in
the compiler, preventing other errors (like their absence in an NgModule)
from being generated from them.
PR Close#31379
This commit relaxes the type of the `formControlName` input to accept both a `string` and a `number`.
Currently, when using a `FormArray`, most templates look like:
```
<div formArrayName="tags">
<div *ngFor="let tag of tagsArray.controls; index as i">
<input [formControlName]="i">
</div>
</div>
```
Here `formControlName` receives a number whereas its input type is a string.
This is fine for VE and `fullTemplateTypeCheck`, but not for Ivy which does a more thorough type checking on inputs with `fullTemplateTypeCheck` enabled and throws `Type 'number' is not assignable to type 'string'`. It is fixable by using `formControlName="{{i}}"` but you have to know the difference between `a="{{b}}"` and `[a]="b"` and change it all over the application codebase. This commit allows the existing code to still type-check.
PR Close#30606
Currently we always generate the `read` parameter for the view and content query instructions, however since most of the time the `read` parameter won't be set, we'll end up generating `null` which adds 5 bytes for each query when minified. These changes make it so that the `read` parameter only gets generated if it has a value.
PR Close#31667
Currently when someone wants to explicitly run the
size-tracking tool tests, the size-tracking tool never
runs because of recent changes for the rules_nodejs
update broke the `entry_point` attribute.
PR Close#31779
When injecting a `ChangeDetectorRef` into a pipe, the expected result is that the ref will be tied to the component in which the pipe is being used. This works for most cases, however when a pipe is used inside a property binding of a component (see test case as an example), the current `TNode` is pointing to component's host so we end up injecting the inner component's view. These changes fix the issue by only looking up the component view of the `TNode` if the `TNode` is a parent.
This PR resolves FW-1419.
PR Close#31438
In the previous patch () all the existing styling code was turned
off in favor of using the new refactored ivy styling code. This
patch is a follow up patch to that and removes all old, unused
styling code from the render3 directory.
PR Close#31193
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.
PR Close#30742
Currently developers can use the `By` class to construct common
`DebugElement` query predicates. e.g. `By.directive(MyDirective)`.
The `directive()` and `all()` predicates are currently returning
a predicate that works for `DebugElement` nodes. This return type
is too strict since the predicate is not specific to `DebugElement`
instances and can also apply to `DebugNode` instances.
Meaning that developers are currently able to use the `directive()`
predicate when using `queryAllNodes()`. This is a common practice
but will break when the project is compiled with TypeScript's
`--strictFunctionTypes` flag as the `DebugElement` predicate type
is not assignable to predicates for `DebugNode`. In order to make
these predicates usable with `--strictFuntionTypes` enabled, we
adjust the predicate type to reflect what is actually needed for
evaluation of the predicate.
PR Close#30993
As part of FW-1265, the `@angular/core` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.
Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)
PR Close#30993
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).
These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.
These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.
PR Close#31550
Removes direct calls from one instruction into another, moves the shared logic into a separate function and removes the state getters from the shared function.
This PR resolves FW-1340.
PR Close#31456
Adds a new `elementContainer` instruction that can be used to avoid two instruction (`elementContainerStart` and `elementContainerEnd`) for `ng-container` that has text-only content. This is particularly useful when we have `ng-container` inside i18n sections.
This PR resolves FW-1105.
PR Close#31444
This partially reverts some changes from 71b9371180 (diff-dd469785fca8680a5b33b1e81c5cfd91R1420)
These broke the g3sync of zone.js because we use the output of the TypeScript compiler directly, rather than rely on the rollup commonjs plugin to define the global symbol
PR Close#31453
Adds the new `classMapInterpolate1` through `classMapInterpolate8` instructions which handle interpolations inside the `class` attribute and moves the interpolation logic internally. This allows us to remove the `interpolationX` instructions in a follow-up PR.
These changes also add an error if an interpolation is encountered inside a `style` tag (e.g. `style="width: {{value}}"`). Up until now this would actually generate valid instructions, because `styleMap` goes through the same code path as `classMap` which does support interpolation. At runtime, however, `styleMap` would set invalid styles that look like `<div style="0:w;1:i;2:d;3:t;4:h;5::;7:1;">`. In `ViewEngine` interpolations inside `style` weren't supported either, however there we'd output invalid styles like `<div style="unsafe">`, even if the content was trusted.
PR Close#31211
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)
@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802
also updates to rules_rass commit compatible with rules_nodejs 0.32.0
PR Close#31325
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.
This PR resolves FW-1404.
PR Close#31296
This was causing issues, because `zone.js` looks like a JS file (despite
it being a directory). The contents of `zone.js/` are still matched by
the globs (it is only the directory itself that is excluded).
Related to #30962.
PR Close#31295
Adds `zone.js` as valid scope for commit messages. This
is necessary because the `zone.js` repository has been
moved into the mono-repo and future changes should be
categorized properly through commit messages.
Currently the pre-commit git hook or CircleCI will fail when
`zone.js` is used as commit scope.
PR Close#31277
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)
@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802
also updates to rules_rass commit compatible with rules_nodejs 0.32.0
PR Close#31019
The function `bind` has been internalized wherever it was needed, this PR makes sure that it is no longer publicly exported.
FW-1385 #resolve
PR Close#31131
Adds two new helper functions that can be used when unit testing Angular services
that depend upon upgraded AngularJS services, or vice versa.
The functions return a module (AngularJS or NgModule) that is configured to wire up
the Angular and AngularJS injectors without the need to actually bootstrap a full
hybrid application.
This makes it simpler and faster to unit test services.
PR Close#16848
Currently when building the `ts-api-guardian` npm package,
the labels are not properly replaced after recent changes to
the `entry_point` attribute. This means that the `ts-api-guardian`
package is currently not usable externally.
PR Close#31096
i18nExp now uses `bind` internally rather than having the compiler generate it in order to bring it in line with other functions like `textBinding` & `property`.
FW-1384 #resolve
PR Close#31089
- Splits core functionality off into a shared internal function
- ɵɵtextBinding will no longer require an index
- Alters the compiler to stop generating an index argument for the instruction
- Updates tests
- Updates some usage of ɵɵtextBinding in i18n to use the helper function instead
PR Close#30792
Factory functions written by the compiler optionally allow an explicit type
to be passed. If called with this type, an instance of the given type will
be created instead of the type for which the factory was generated. This is
used to power inheritance of Angular types, as if the constructor of a class
is inherited from its superclass, then the factory function of the
superclass must be used (it has all the DI info) to construct an instance of
the derived class.
This commit adjusts typings in a few places to allow factory functions to be
called with this extra type parameter.
PR Close#30855
The compiler generates a 'token' field when it emits an ngInjectableDef,
but this field was not required by defineInjectable or the InjectableDef
interface, nor was it added by InjectionToken.
This commit makes 'token' required and adds it where missing.
PR Close#30855
- Removes ɵɵelementProperty instruction
- Updates tests that were using it
- NOTE: There is one test under `render3/integration_spec.ts` that is commented out, and needs to be reviewed. Basically, I could not find a good why to test what it was doing, because it was doing things that I am not sure we could generate in an acceptance test.
PR Close#30645
With View engine it was possible to declare multiple projection
definitions and to programmatically project nodes into the slots.
e.g.
```html
<ng-content></ng-content>
<ng-content></ng-content>
```
Using `ViewContainerRef#createComponent` allowed projecting
nodes into one of the projection defs (through index)
This no longer works with Ivy as the `projectionDef` instruction only
retrieves a list of selectors instead of also retrieving entries for
reserved projection slots which appear when using the default
selector multiple times (as seen above).
In order to fix this issue, the Ivy compiler now passes all
projection slots to the `projectionDef` instruction. Meaning that
there can be multiple projection slots with the same wildcard
selector. This allows multi-slot projection as seen in the
example above, and it also allows us to match the multi-slot node
projection order from View Engine (to avoid breaking changes).
It basically ensures that Ivy fully matches the View Engine behavior
except of a very small edge case that has already been discussed
in FW-886 (with the conclusion of working as intended).
Read more here: https://hackmd.io/s/Sy2kQlgTE
PR Close#30561
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
This commit makes the static flag on @ViewChild and @ContentChild required.
BREAKING CHANGE:
In Angular version 8, it's required that all @ViewChild and @ContentChild
queries have a 'static' flag specifying whether the query is 'static' or
'dynamic'. The compiler previously sorted queries automatically, but in
8.0 developers are required to explicitly specify which behavior is wanted.
This is a temporary requirement as part of a migration; see
https://angular.io/guide/static-query-migration for more details.
@ViewChildren and @ContentChildren queries are always dynamic, and so are
unaffected.
PR Close#30639
DEPRECATION:
platform-webworker has been around since the initial release of Angular
version 2. It began as an experiment to leverage Angular's rendering
architecture and try something different: to run an entire web application
in a web worker.
We've learned a lot from this experiment, and have come to the conclusion
that pushing entire applications to run in a web worker is not a recipe for
success for most applications. This is due to a number of unresolved issues,
including:
* Poor or non-existent support for web worker APIs in web crawlers/indexers.
* Poor support in build and bundling tooling.
As a result, as of Angular version 8, we are deprecating the
`platform-webworker` APIs in Angular. This consists of both NPM packages,
`@angular/platform-webworker` and `@angular/platform-webworker-dynamic`.
Going forward, we will focus our efforts related to web workers around their
primary use case of offloading CPU-intensive but not critical work.
FW-1339 #resolve
PR Close#30642
DEPRECATION:
Angular previously has supported an integration with the Web Tracing
Framework (WTF) for performance testing of Angular applications. This
integration has not been maintained and likely does not work for the
majority of Angular applications today. As a result, we are deprecating
the integration in Angular version 8.
This deprecation covers the following public APIs:
* `WtfScopeFn`
* `wtfCreateScope`
* `wtfStartTimeRange`
* `wtfEndTimeRange`
* `wtfLeave`
FW-1338 #resolve
PR Close#30642
PR #29290 introduced a new `TestBed.get` signature and deprecated the existing one.
This raises a lot of TSLint deprecation warnings in projects using a strict TS config (see #29905 for context), so we are temporarily removing the `@deprecated` annotation in favor of a plain text warning until we properly fix it.
Refs #29905
Fixes FW-1336
PR Close#30514
BREAKING CHANGE
In PR #19558, we fixed a bug in `TestBed.overrideProvider` where
eager providers were not being instantiated correctly. However,
it turned out that since this bug had been around for quite a bit,
many apps were relying on the broken behavior where the providers
would not be instantiated. To assist in the transition, the
`TestBed.deprecatedOverrideProvider` method was temporarily
introduced to mimic the old behavior so that apps would have a
longer time period to migrate their code.
2 years and 3 versions later, it is time to remove the temporary
method. This commit removes `TestBed.deprecatedOverrideProvider`
altogether. Any usages of `TestBed.deprecatedOverrideProvider`
should be replaced with `TestBed.overrideProvider`. This may mean
that providers that were not created before will now be instantiated,
which could mean that your tests need to provide more mocks or stubs
for the dependencies of the newly instantiated providers.
PR Close#30576
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character
So back to the frog eyes we go.
```
__
/ɵɵ\
( -- ) - I am ineffable. I am forever.
_/ \_
/ \ / \
== == ==
```
PR Close#30546
Adds overloads to the `transform` methods of `SlicePipe`,
to have better types than `any` for `value` and `any` as a return.
With this commit, using `slice` in an `ngFor` still allow to type-check the content of the `ngFor`
with `fullTemplateTypeCheck` enabled in Ivy:
<div *ngFor="let user of users | slice:0:2">{{ user.typo }}</div>
|
`typo` does not exist on type `UserModel`
whereas it is currently not catched (as the return of `slice` is `any`) neither in VE nor in Ivy.
BREAKING CHANGE
`SlicePipe` now only accepts an array of values, a string, null or undefined.
This was already the case in practice, and it still throws at runtime if another type is given.
But it is now a compilation error to try to call it with an unsupported type.
PR Close#30156
We were on 69 for both of these platforms which is fairly old. This update also requires a temporary patch to the @bazel/karma npm package to disable chrome sandboxing on OSX as it is broken under Bazel as of chromium 73. Windows is still on Chromium 66 but updating this will require upstream changes to rules_webtesting as the archive name & executable name has changed as of 72 for Windows and hard-coded paths in rules_webtesting break things.
PR Close#30502
A structural directive can specify a template guard for an input, such that
the type of that input's binding can be narrowed based on the guard's return
type. Previously, such template guards could only be methods, of which an
invocation would be inserted into the type-check block (TCB). For `NgIf`,
the template guard narrowed the type of its expression to be `NonNullable`
using the following declaration:
```typescript
export declare class NgIf {
static ngTemplateGuard_ngIf<E>(dir: NgIf, expr: E): expr is NonNullable<E>
}
```
This works fine for usages such as `*ngIf="person"` but starts to introduce
false-positives when e.g. an explicit non-null check like
`*ngIf="person !== null"` is used, as the method invocation in the TCB
would not have the desired effect of narrowing `person` to become
non-nullable:
```typescript
if (NgIf.ngTemplateGuard_ngIf(directive, ctx.person !== null)) {
// Usages of `ctx.person` within this block would
// not have been narrowed to be non-nullable.
}
```
This commit introduces a new strategy for template guards to allow for the
binding expression itself to be used as template guard in the TCB. Now,
the TCB generated for `*ngIf="person !== null"` would look as follows:
```typescript
if (ctx.person !== null) {
// This time `ctx.person` will successfully have
// been narrowed to be non-nullable.
}
```
This strategy can be activated by declaring the template guard as a
property declaration with `'binding'` as literal return type.
See #30235 for an example where this led to a false positive.
PR Close#30248
The LocationShim (replacement for `$location`) was added to centralize dealing with the browser URL. Additionally, an `onUrlChange` method was added to Angular's Location service. This PR adds a corresponding method to the LocationShim so updates from AngularJS can be tracked in Angular.
PR Close#30466
Preserve compatibility with rollup_bundle rule.
Add missing npm dependencies, which are now enforced by the strict_deps plugin in tsc_wrapped
PR Close#30370
Currently in Ivy `NgModule` registration happens when the class is declared, however this is inconsistent with ViewEngine and requires extra generated code. These changes remove the generated code for `registerModuleFactory`, pass the id through to the `ngModuleDef` and do the module registration inside `NgModuleFactory.create`.
This PR resolves FW-1285.
PR Close#30244
After this PR is merged, maintainers no longer need to update .bazelrc
file, toolchain and platform related flags for RBE builds and tests
(unless there is a breaking change in Bazel related to those flags).
Maintainers just need to update the pin of @bazel-toolchains repo
regularly in the packages/bazel/package.bzl file according to
https://releases.bazel.build/bazel-toolchains.html to include the
latest checked-in toolchain configs. If rbe_autoconfig() cannot find
appropriate toolchain configs for the version of Bazel in the version of
@bazel_toolchains repo that is currently used by this project, it will pull
down the container and generate the configs on the fly as the beginning
of the build/test.
PR Close#29336
Based on discussion that happened on the PR that introduced
the size-tracking tool, we want to have another threshold for
the raw byte difference. This allows us to better control for
which changes the size-tracking tool should report a difference.
See: https://github.com/angular/angular/pull/30070#discussion_r278332315
PR Close#30257
This is the final patch to migrate the Angular styling code to have a
smaller instruction set in preparation for the runtime refactor. All
styling-related instructions now work both in template and hostBindings
functions and do not use `element` as a prefix for their names:
BEFORE:
elementStyling()
elementStyleProp()
elementClassProp()
elementStyleMap()
elementClassMap()
elementStylingApply()
AFTER:
styling()
styleProp()
classProp()
styleMap()
classMap()
stylingApply()
PR Close#30318
This patch removes all host-specific styling instructions in favor of
using element-level instructions instead. Because of the previous
patches that made sure `select(n)` worked between styling calls, all
host level instructions are not needed anymore. This patch changes each
of those instruction calls to use any of the `elementStyling*`,
`elementStyle*` and `elementClass*` styling instructions instead.
PR Close#30336
This patch is one commit of many patches that will unify all styling instructions
across both template-level bindings and host-level bindings. This patch in particular
removes the `elementIndex` param because it is already set prior to each styling
instruction via the `select(n)` instruction.
PR Close#30313
This patch breaks up the existing `elementStylingMap` into
`elementClassMap` and `elementStyleMap` instructions. It also breaks
apart `hostStlyingMap` into `hostClassMap` and `hostStyleMap`
instructions. This change allows for better tree-shaking and reduces
the complexity of the styling algorithm code for `[style]` and `[class]`
bindings.
PR Close#30293
Fixes `HostBinding` and `HostListener` declarations not being inherited from base classes that don't have an Angular decorator.
This PR resolves FW-1275.
PR Close#30158
Introduces a new Bazel test that allows us to inspect
what source-files contribute to a given bundled file
and how much bytes they contribute to the bundle size.
Additionally the size-tracking rule groups the size
data by directories. This allows us to compare size
changes in the scope of directories. e.g. a lot of
files in a directory could increase slightly in size, but
in the directory scope the size change could be significant
and needs to be reported by the test target.
Resolves FW-1278
PR Close#30070
Currently when working on Windows, it's not possible to accept a new
golden for a `symbol-extractor` Bazel test. This is because the generated
executable output from the `nodejs_binary` rule (without a macro) misses
a Windows executable wrapper that sets up the proper environment
variables for the runfiles. Causing the following failure on Windows:
```
>>>> FAIL: RUNFILES environment variable is not set. <<<<
```
PR Close#30127
When the workspace node_modules are not installed outside of bazel context the api guardian tests fails because the tree artifacts files are not symlinked in windows.
We need to pass the node module location in the node_path
PR Close#30105
This change addresses several issues with ts-api-guardian and public api guards related tests in Windows
The fixes contain 3 main changes:
1) In `stripExportPattern` - replace `^` with `^^^^` in RegExp due to a double escaping requirment under Windows. Note that under Linux this the extra character has no effect because it's still a valid RegExp in Js.
2. Force `*.patch` files to always be with a LF line sequence instead of CRLF in windows
3. When adding JSDoc comments consider the presence of a carriage return in a line new feed
Partially addresses #29785
PR Close#30105
- Extracts and documents code that will be common to interpolation instructions
- Ensures that binding indices are updated at the proper time during compilation
- Adds additional tests
Related #30011
PR Close#30129
When using the npm package in a workspace which doesn't depend on chalk, ts-api-guardian fails with an error `Error: Cannot find module 'chalk'`
PR Close#30138
Previously, the ServiceWorker registration options should be defined as
an object literal (in order for them to be compatible with Ahead-of-Time
compilation), thus making it impossible to base the ServiceWorker
behavior on runtime conditions.
This commit allows specifying the registration options using a regular
provider, which means that it can take advantage of the `useFactory`
option to determine the config at runtime, while still remaining
compatible with AoT compilation.
PR Close#21842
The proposed ES dynamic import() is now supported by the Angular CLI and the
larger toolchain. This renders the `loadChildren: string` API largely
redundant, as import() is far more natural, is less error-prone, and is
standards compliant. This commit deprecates the `string` form of
`loadChildren` in favor of dynamic import().
DEPRECATION:
When defining lazy-loaded route, Angular previously offered two options for
configuring the module to be loaded, both via the `loadChildren` parameter
of the route. Most Angular developers are familiar withthe `string` form of
this API. For example, the following route definition configures Angular to
load a `LazyModule` NgModule from `lazy-route/lazy.module.ts`:
```
[{
path: 'lazy',
loadChildren: 'lazy-route/lazy.module#LazyModule',
}]
```
This "magic string" configuration was previously necessary as there was
no dynamic module loading standard on the web. This has changed with the
pending standardization of dynamic `import()` expressions, which are now
supported in the Angular CLI and in web tooling in general. `import()`
offers a more natural and robust solution to dynamic module loading. The
above example can be rewritten to use dynamic `import()`:
```
[{
path: 'lazy',
loadChildren: () => import('./lazy-route/lazy.module').then(mod => mod.LazyModule),
}]
```
This form of lazy loading offers significant advantages in terms of:
* type checking via TypeScript
* simplicity of generated code
* future potential to run natively in supporting browsers
(see: [caniuse: dynamic import()](https://caniuse.com/#feat=es6-module-dynamic-import))
As a result, Angular is deprecating the `loadChildren: string` syntax in
favor of ES dynamic `import()`. An automatic migration will run during
`ng upgrade` to convert your existing Angular code to the new syntax.
PR Close#30073
This commit provides a replacement for `$location`. The new service is written in Angular, and can be consumed into existing applications by using the downgraded version
of the provider.
Prior to this addition, applications upgrading from AngularJS to Angular could get into a situation where AngularJS wanted to control the URL, and would often parse or se
rialize the URL in a different way than Angular. Additionally, AngularJS was alerted to URL changes only through the `$digest` cycle. This provided a buggy feedback loop
from Angular to AngularJS.
With this new `LocationUpgradeProvider`, the `$location` methods and events are provided in Angular, and use Angular APIs to make updates to the URL. Additionally, change
s to the URL made by other parts of the Angular framework (such as the Router) will be listened for and will cause events to fire in AngularJS, but will no longer attempt
to update the URL (since it was already updated by the Angular framework).
This centralizes URL reads and writes to Angular and should help provide an easier path to upgrading AngularJS applications to Angular.
PR Close#30055
Without this change, the framework doesn't surface URL parts such as hostname, protocol, and port. This makes it difficult to rebuild a complete URL. This change provides new APIs to read these values.
PR Close#30055
Previously there wasn't a way to retrieve `history.state` from the `Location` service. The only time the framework exposed this value was in navigation events. This meant if you weren't using the Angular router, there wasn't a way to get access to this `history.state` value other than going directly to the DOM.
This PR adds an API to retrieve the value of `history.state`. This will be useful and needed to provide a backwards-compatible `Location` service that can emulate AngularJS's `$location` service since we will need to be able to read the state data in order to produce AngularJS location transition events.
This feature will additionally be useful to any application that wants to access state data through Angular rather than going directly to the DOM APIs.
PR Close#30055
Fixes view and content queries not being inherited in Ivy, if the base class hasn't been annotated with an Angular decorator (e.g. `Component` or `Directive`).
Also reworks the way the `ngBaseDef` is created so that it is added at the same point as the queries, rather than inside of the `Input` and `Output` decorators.
This PR partially resolves FW-1275. Support for host bindings will be added in a follow-up, because this PR is somewhat large as it is.
PR Close#30015
built-in, relative, absolute, nested node_modules - Error: Cannot find module '../lib/cli'
built-in, relative, absolute, nested node_modules - Error: Cannot find module '../lib/cli'
This is because the transpiled lib files need to be added to the data.
PR Close#30063
At the moment `ts_api_guardian_test` rule depends on the entire node_modules tree, this is causing an input file tree of over 71473 in the material repo which is failing RBE
With this change we add only the required dependencies to as data attribute instead of the `@npm//:node_modules`
With this change we should also reduce the `Too many open files in system` error that sometimes crops up
PR Close#30051
With this change downstream users will no longer need to build ts-api-guardian from source as now the bazel rule is available in the npm package.
This can be used by installing ts-api-guardian as a devDependency and changing the load syntax from:
```
load("@angular//tools/ts-api-guardian:index.bzl", "ts_api_guardian_test")
```
to:
```
load("@npm_ts_api_guardian//:index.bzl", "ts_api_guardian_test")
```
**Note**: downstream users should also clean their `WORKSPACE` and remove the dependencies of angular workspace.
PR Close#29977
With dts bundles, `core.d.ts` will include an `EventListener` class as it's used in 303eae918d/packages/core/src/debug/debug_node.ts (L32)
This will conflict with the DOM EventListener, as anything in `core.d.ts` which is using the DOM EventListener will fallback in using the one defined in the same module and hence build will fail because their implementation is different.
With this change, we rename the local `EventListener` to `DebugEventListener`, the later one is non exported.
Fixes#29806
PR Close#29809
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
The `Δ` caused issue with other infrastructure, and we are temporarily
changing it to `ɵɵ`.
This commit also patches ts_api_guardian_test and AIO to understand `ɵɵ`.
PR Close#29850
So far using runtime i18n with ivy meant that you needed to use Closure and `goog.getMsg` (or a polyfill). This PR changes the compiler to output both closure & non-closure code, while the unused option will be tree-shaken by minifiers.
This means that if you use the Angular CLI with ivy and load a translations file, you can use i18n and the application will not throw at runtime.
For now it will not translate your application, but at least you can try ivy without having to remove all of your i18n code and configuration.
PR Close#28689
- Removes `@publicApi` annotation from ivy instructions
- Adds new `@codeGenApi` annotation to ivy instructions
- Updates ts_api_guardian to support the new annotation properly
PR Close#29820
Currently in Ivy we pass both the raw and parsed selectors to the projectionDef instruction, because the parsed selectors are used to match most nodes, whereas the raw ones are used to match against nodes with the ngProjectAs attribute. The raw selectors add a fair bit of code that won't be used in most cases, because ngProjectAs is somewhat rare.
These changes rework the compiler not to output the raw selectors in the projectionDef, but to parse the selector in ngProjectAs and to store it on the TAttributes. The logic for matching has also been changed so that it matches the pre-parsed ngProjectAs selector against the list of projection selectors.
PR Close#29578
The new styling algorithm in angular is designed to evaluate host
bindings stylinh priority in order of directive evaluation order. This,
however, does not work with respect to parent/sub-class directives
because sub-class host bindings are run after the parent host bindings
but still have priority. This patch ensures that the host styling bindings
for parent and sub-class components/directives are executed with respect
to the styling algorithm prioritization.
Jira Issue: FW-1132
PR Close#29602
Adds an overload to TestBed.get making parameters strongly typed and
deprecated previous signature that accepted types `any`. The function
still returns `any` to prevent build breakages, but eventually stronger
type checks will be added so a future Angular version will break builds
due to additional type checks.
See previous breaking change - #13785
Issue #26491
PR Close#29290
This new interface will match classes whether they are abstract or
concrete. Casting as `AbstractType<MyConcrete>` will return a type that
isn't newable. This type will be used to match abstract classes in the
`get()` functions of `Injector` and `TestBed`.
Type isn't used yet so this isn't a breaking change.
Issue #26491
PR Close#29295
Currently our plan is to skip the publish, docgen, and update steps for this package.
During RC, we'll determine if the breaking change is too difficult for users, in which case we might restore the package for another major.
PR Close#29550
Previously we had to share code between upgrade/dynamic and upgrade/static
by symlinking the `src` folder, which allowed both packages to access
the upgrade/common files.
These symlinks are always problematic on Windows, where we had to run
a script to re-link them, and restore them.
This change uses Bazel packages to share the `upgrade/common` code,
which avoids the need for symlinking the `src` folder.
Also, the Windows specific scripts that fixup the symlinks have also
been removed as there is no more need for them.
PR Close#29466
Currently with the release of "8.0.0-beta.10", the Bazel npm packag accidentally
was stamped with an incorrect version placeholder: `8.0.0-beta.10+1.sha-a28b3e3`.
This can happen because the placeholder is based on latest tag that matches the
Semver format. e.g. if `HEAD` equals to the commit that has the latest tag, the
version name will be correct and refer to the tag name (e.g. `8.0.0-beta.10`). Though
if the latest commit is not tagged with the most recent tag, the version
name will also include the SHA of the commit (e.g. `8.0.0-beta.10+1.sha-a28b3e3`).
We can ensure that we don't accidentally release versions from a more recent commit
that shouldn't be part of the release by adding a pre-release check that ensures that
the `BUILD_SCM_VERSION` Bazel status variable matches the expected version format.
PR Close#29551
The router loadChildren property already supports a promise that returns a NgModuleFactory, but the typings cause the compilation to fail.
PR Close#29392
After rebasing Material on master, we found new tests that were
added and are still failing. This commit adds them to the blocklist
so we can fix them.
PR Close#29409
Just updating comments in query-related things to make it easier for the next person that has to grok this for the first time.
Also adds a demo from @mhevery to one of the query specs
Related #29031
PR Close#29342
Just updating comments in query-related things to make it easier for the next person that has to grok this for the first time.
Also adds a demo from @mhevery to one of the query specs
Related #29031
PR Close#29342
Angular Ivy interprets inline static style/class attribute values as instructions that
are processed whilst an element gets created. Because these inline style values are
referenced by style/class bindings, their inline style values are applied at a later
stage. Despite them being eventually applied, their values should be applied earlier
before any directives are instantiated so that directive code can rely on any inline
style/class changes.
This patch ensures that all static style/class attribute values are applied (rendered)
on the element before directives are instantiated.
Jira Issue: FW-1133
PR Close#29269
`api-extractor` binary is required for external consumers of `ng_module` that want to use the `bundle_dts` flag.
This also sets a different api-exttractor binary to use for ng_module, based if it's internal or external.
PR Close#29202
This method is a more convenient and efficient way of removing all
components from a FormArray. Before it, we needed to loop the FormArray
removing each component until empty.
Resolves#18531
PR Close#28918
Angular supports having a component extend off of a parent component.
When this happens, all annotation-level data is inherited including styles
and classes. Up until now, Ivy only paid attention to static styling
values on the parent component and not the child component. This patch
ensures that both the parent's component and child component's styling
data is merged and rendered accordingly.
Jira Issue: FW-1081
PR Close#29015
Currently we only reset the `Attached` flag of a view if it is detached through its parent, however this means that if a root view is destroyed, its flag will never be reset. This manifested itself in one of the Material tests where we were destroying the root view.
This PR resolves FW-1130.
PR Close#29064
Currently if a user accidentally calls ViewContainerRef.insert() with
a view that has already been attached, we do not clean up the references
properly, so we create a view tree with a cycle. This causes an infinite
loop when the view is destroyed.
This PR ensures that we fall back to ViewContainerRef.move() behavior
if we try to insert a view that is already attached. This fixes the
cycle and honors the user intention.
PR Close#29047
Currently if an embedded view contains projected nodes, its `rootNodes` array will include `null` instead of the root nodes inside the projection slot. This manifested itself in one of the Material unit tests where we stamp out a template and then move its `rootNodes` into the overlay container.
This PR is related to FW-1087.
PR Close#28951
If an interface is not exported publicly from its package, then the doc-gen
does not see it, and so cannot include it in the generated documentation.
This was the case for a number of `...Decorator` interfaces, such as
`PipeDecorator` and `InputDecorator.
This commit adds these interfaces to the public export to fix this problem.
PR Close#28836
Fixes the `ngOnDestroy` hook on a component or directive being called twice, if the type is also registered as a provider.
This PR resolves FW-1010.
PR Close#28470
This commit removes more test from the Material blocklist so that
they will run on CI. After static query support was added, they
are no longer failing.
PR Close#28876
Prior to this fix, both the `NgStyle` and `NgClass` directives made use
of `Renderer2` and this dependency raised issues for future versions of
Angular that cannot inject it. This patch ensures that there are two
versions of both directives: one for the VE and another for Ivy.
Jira Issue: FW-882
PR Close#28711
The `setUpLocationSync` function in @angular/router/upgrade didn't previously let you sync hash-based navigations. With this change, you can now pass an option to `setUpLocationSync` that will make sure location changes run in Angular in hash-based apps.
Fixes#24429#21995
PR Close#28609
Prior to this commit, the timing of `ViewChild`/`ContentChild` query
resolution depended on the results of each query. If any results
for a particular query were nested inside embedded views (e.g.
*ngIfs), that query would be resolved after change detection ran.
Otherwise, the query would be resolved as soon as nodes were created.
This inconsistency in resolution timing had the potential to cause
confusion because query results would sometimes be available in
ngOnInit, but sometimes wouldn't be available until ngAfterContentInit
or ngAfterViewInit. Code depending on a query result could suddenly
stop working as soon as an *ngIf or an *ngFor was added to the template.
With this commit, users can dictate when they want a particular
`ViewChild` or `ContentChild` query to be resolved with the `static`
flag. For example, one can mark a particular query as `static: false`
to ensure change detection always runs before its results are set:
```ts
@ContentChild('foo', {static: false}) foo !: ElementRef;
```
This means that even if there isn't a query result wrapped in an
*ngIf or an *ngFor now, adding one to the template later won't change
the timing of the query resolution and potentially break your component.
Similarly, if you know that your query needs to be resolved earlier
(e.g. you need results in an ngOnInit hook), you can mark it as
`static: true`.
```ts
@ViewChild(TemplateRef, {static: true}) foo !: TemplateRef;
```
Note: this means that your component will not support *ngIf results.
If you do not supply a `static` option when creating your `ViewChild` or
`ContentChild` query, the default query resolution timing will kick in.
Note: This new option only applies to `ViewChild` and `ContentChild`
queries, not `ViewChildren` or `ContentChildren` queries, as those types
already resolve after CD runs.
PR Close#28810
Previously, the `validate-commit-message` gulp task was using the
`git log ... ^r1 r2` syntax to list commits between the base branch and
the current head. This didn't work as expected on Windows, because `^`
is the escape character. As a result, the command was equivalent to
`git log ... r1 r2` on Windows, which essentially logs all commits
reachable from either `r1` or `r2`.
This commit fixes it by switching to git's
[double-dot range notation][1] (`r1..r2`), which is an alias for the
`^r1 r2` syntax and works correctly on all platforms.
[1]: https://git-scm.com/docs/gitrevisions#_dotted_range_notationsFixes#16830
PR Close#28780
Stop execution when an error happens in `validate-commit-message` gulp
task and ensure the error message is printed at the bottom.
Fixes#16829
PR Close#28780
Since we build and publish the individual packages
using Bazel and `build.sh` has been removed, we can
safely remove the `rollup.config.js` files which are no
longer needed because the `ng_package` bazel rule
automatically handles the rollup settings and globals.
PR Close#28646
Currently errors thrown inside event handler in Ivy are caught and forwarded to the `ErrorHandler`, however this means that if they happen during a unit test, the test won't fail. These changes add a test-specific `ErrorHandler` that throws the error rather than logging it out.
PR Close#28707
Prior to this change we used current injector implementation for module injector, which was causing problems and produces circular dependencies in case the same token is referenced (with @SkipSelf flag) in the `deps` array. The origin of the problem was that once `directiveInject` implementation becomes active, it was used for module injector as well, thus searching deps in Component/Directive DI scope. This fix sets `injectInjectorOnly` implementation for module injector to resolve the problem.
PR Close#28667
This commit adds a devMode-only check which will throw if a user
attempts to bind a property that does not match a directive
input or a known HTML property.
Example:
```
<div [unknownProp]="someValue"></div>
```
The above will throw because "unknownProp" is not a known
property of HTMLDivElement.
This check is similar to the check executed in View Engine during
template parsing, but occurs at runtime instead of compile-time.
Note: This change uncovered an existing bug with host binding
inheritance, so some Material tests had to be turned off. They
will be fixed in an upcoming PR.
PR Close#28537
createInjector() is an Ivy-only API that should not have
been exported as part of the public API. This commit removes
the export. It will be re-exported when Ivy is released.
PR Close#28509
In 7cb8396, we improved the symbol test to remove suffixes from
the output, so "CIRCULAR$1" became "CIRCULAR". However, the logic
that checked for extra symbols depended on each symbol being unique.
If multiple symbols with the same name were added (e.g. pulled in
from separate files), they would be added to the map as "extras",
even if they were marked as expected in the golden file.
This commit updates the symbol checking logic to take multiple
symbols with the same name into account.
Closes#28406
PR Close#28459
* No longer builds the example e2e tests using "tsc". The examples are now built with Bazel and can therefore be built with Ivy by using the `--define=compile=aot` switch.
* No longer runs the example e2e tests using the protractor CLI. example e2e tests are executed with the Bazel protractor rule and can therefore run incrementally.
NOTE: Unit tests found within the examples are still running within the legacy jobs.
PR Close#28402
- Wraps the NgOnChangesFeature in a factory such that no side effects occur in the module root
- Adds comments to ngInherit property on feature definition interface to help guide others not to make the same mistake
- Updates compiler to generate the feature properly after the change to it being a factory
- Updates appropriate tests
PR Close#28187
Prior to this fix Ivy would not execute any animation triggers
that exist as host bindings on an element if it is removed by
the parent template.
PR Close#28162
There was an issue where init_browser_spec.js was being run out of order, this change adds it as a runtime dependency so it is executed when it needs to be preventing tests from bombing when they try to read from isNode from global scope before it is defined
PR Close#27965
@angular/forms declares several directives and a module which are not
exported from the package via the entrypoint, either intentionally or as a
historical accident.
Ivy's locality principle necessitates that directives used in user code be
importable from the package which defines them. This requires these forms
directives to be exported.
Several directives which define ControlValueAccessors are exported:
* NumberValueAccessor
* RangeValueAccessor
A few more directives and a module are exported privately (with a ɵ prefix):
* NgNoValidate
* NgSelectMultipleOption
* InternalFormsSharedModule
PR Close#27743
test.sh is no longer needed... all the tests should now be executed via bazel.
if for whatever reason we need to run the legacy unit test setup, we should should follow the commands that we use to execute those tests in .circle/config.yaml
PR Close#27937
Internally getError and hasError call the AbstractControl#get method which takes `path: Array<string | number> | string` as input, since there are different ways to traverse the AbstractControl tree.
This change matches the method signitures of all methods that use this.
PR Close#20211
This option means guards and resolvers will ignore changes when a provided predicate function returns `false`. This supports use cases where an application needs to ignore some param updates but not others. For example, changing a sort param in the URL might need to be ignored, whereas changing the a `project` param might require re-run of guards and resolvers.
Related to #26861#18253#27464
PR Close#27682
`NgModule` requires that `Component`s/`Directive`s/`Pipe`s are listed in
declarations, and that each `Component`s/`Directive`s/`Pipe` is declared
in exactly one `NgModule`. This change adds runtime checks to ensure
that these sementics are true at runtime.
There will need to be seperate set of checks for the AoT path of the
codebase to verify that same set of semantics hold. Due to current
design there does not seem to be an easy way to share the two checks
because JIT deal with references where as AoT deals with AST nodes.
PR Close#27604
* Suppresses the warning from the Bazel TypeScript rules about overwritten options from the `tools/tsconfig.json` file. This is the only remaining warning that makes our Bazel build on Angular Material "dirty"
PR Close#27583
there is still too much churn to make this info useful in the release notes, advanced
developers can use git log to find out what's going on with ivy.
PR Close#27532
This option means guards and resolvers will ignore changes to matrix parameters. Guards and resolvers will be rerun when the path changes, when path parameters change, or when query parameters change.
The primary use case for such a mode is when updating the UI and getting the URL to be in sync with local changes. For example, if displaying a sortable table, changing the sort direction is often handled by the table itself. But you would want to update the URL to be in sync with what's being displayed to the user. As long as the table sort direction is stored as a matrix parameter, you can use this option to update the URL without causing the overhead of re-running guards and resolvers.
Related to #26861#18253
PR Close#27464
BREAKING CHANGE:
The public API for `DebugNode` was accidentally too broad. This change removes
1. Public constructor. Since `DebugNode` is a way for Angular to communicate information
on to the developer there is no reason why the developer should ever need to
Instantiate the `DebugNode`
2. We are also removing `removeChild`, `addChild`, `insertBefore`, and `insertChildAfter`.
All of these methods are used by Angular to constructor the correct `DebugNode` tree.
There is no reason why the developer should ever be constructing a `DebugNode` tree
And these methods should have never been made public.
3. All properties have been change to `readonly` since `DebugNode` is used by Angular
to communicate to developer and there is no reason why these APIs should be writable.
While technically breaking change we don’t expect anyone to be effected by this change.
PR Close#27223
This fixes an issue where a value would hide the type.
```
export interface Foo {
someMethod(): void;
}
export const Foo: Function = ...;
```
In the above example the `Foo` constant will hide the `interface Foo` symbol.
This change properly saves the interface in addition to the type.
PR Close#27223
A recent commit (probably 2c7386c) has changed the import graph of the
DI types in core, and somehow results in the ngc compiler deciding to
re-export core DI types from application factories which tangentially
use inject(). This is not really surprising; ngc's import graph can be
very unstable.
However, this results in a re-export of InjectFlags surviving JS
compilation. InjectFlags was a const enum, akin to an interface in TS,
with no runtime repesentation. This causes a warning to be emitted by
Webpack when it sees the re-export of InjectFlags.
This commit avoids the issue by removing 'const' from the declaration
of InjectFlags, causing it to have a runtime value. This is a temporary
fix. The real fix will be for ngc to no longer write exports of const
enums.
Testing strategy: manually verified. Due to the problem only manifesting
when recompiling after a change and then running Webpack, there is no
existing framework via which this could be easily tested with an
integration test. Additionally, the potential for this issue is gone in
Ivy, so this solution is only temporarily needed.
Fixes#27251.
PR Close#27279
These paths are no longer needed / used.
I had to disable one jit mode spec because it fails now that we actually run it.
I root caused the jit test failure as missing forwardRef support. See FW-645.
PR Close#27278
This option means guards and resolvers will ignore changes to optional
parameters such as query and matrix params. When the path or any path
params change, guards and resolvers will be run
Related to discussion in #18253
FW-560 #resolve
PR Close#26861
At the moment, `path.posix.relative` will break paths in windows as it will return something like
```
Error: Source file "../C:/users/alag/_bazel_alag/3tbqurya/execroot/angular/bazel-out/x64_windows-fastbuild/bin/packages/core/core.d.ts" not found
```
PR Close#26888
This API is part of our public api surface and needs to be monitored by the public_api_guard.
I also had to go back and mark all of the exported functions with @publicApi jsdoc tag.
PR Close#27008
Currently, calling `downgradeModule()` more than once is not supported.
If one wants to downgrade multiple Angular modules, they can create a
"super-module" that imports all the rest and downgrade that.
This commit adds support for downgrading multiple Angular modules. If
multiple modules are downgraded, then one must explicitly specify the
downgraded module that each downgraded component or injectable belongs
to, when calling `downgradeComponent()` and `downgradeInjectable()`
respectively.
No modification is needed (i.e. there is no need to specify a module for
downgraded components and injectables), if an app is not using
`downgradeModule()` or if there is only one downgraded Angular module.
Fixes#26062
PR Close#26217
* No longer depends on a custom CircleCI docker image that comes with Bazel pre-installed. Since Bazel is now available through NPM, we should be able to use the version from `@bazel/bazel` in order to enforce a consistent environment on CI and locally.
* This also reduces the amount of packages that need to be published (ngcontainer is removed)
PR Close#26691
This makes yarn_install of ngdeps under Bazel faster, since we don't need many of the large dependencies.
It's important because downstream angular/bazel users will observe the same install time.
PR Close#26691
* Fixes that the `ts-api-guardian` package does not work on Windows with Bazel. This is because `ts-api-guardian` does not resolve the runfiles through theNodeJS `require` function that properly handles runfiles within Bazel.
PR Close#26761
Since the API guardian can be also used by other projects, we should not set up the default Angular project tag rules unless specified explicitly through a given command option (`useAngularTagRules`)
PR Close#26761
These tests are currently broken because of the following reasons:
- ivy no longer emits a generated index, so the filename of the main d.ts file is different
- ivy currently exports some symbols that don't match the golden file, this needs investigation
PR Close#26602
these files are not used because the api surface of this package is not considered
to be stable/public api.
the presence of these files only confuses the reader.
PR Close#26602
These tests were previously not running on CI so they have always been broken,
or got broken just recently :-(.
test(ivy): mark failing test targets with fixme-ivy-jit and fixme-ivy-local tags
PR Close#26735
We are close enough to blacklist a few test targets, rather than whitelist targets to run...
Because bazel rules can be composed of other rules that don't inherit tags automatically,
I had to explicitly mark all of our ts_library and ng_module targes with "ivy-local" and
"ivy-jit" tags so that we can create a query that excludes all fixme- tagged targets even
if those targets are composed of other targets that don't inherit this tag.
This is the updated overview of ivy related bazel tags:
- ivy-only: target that builds or runs only under ivy
- fixme-ivy-jit: target that doesn't yet build or run under ivy with --compile=jit
- fixme-ivy-local: target that doesn't yet build or run under ivy with --compile=local
- no-ivy-jit: target that is not intended to build or run under ivy with --compile=jit
- no-ivy-local: target that is not intended to build or run under ivy with --compile=local
PR Close#26471
Allow the jsdoc tag processing to be configured by
type (export, member, param) and by action (required,
banned, toCopy).
This is a pre-requisite to moving over to using `@publicApi`
tags rather than `@stable` and `@experimental`.
PR Close#26595
This commit also removes the extra jasminewd2 typings, since the changes
have been merged in the official typings with
DefinitelyTyped/DefinitelyTyped#28957.
PR Close#26139
Using Renderer’s setElementAttribute or setElementStyle with a null or undefined value removes the
corresponding attribute or style. The argument type should allow this when using strictNullChecks.
Closes#13686
PR Close#17065
This commit adds an ngTemplateGuard_ngIf static method to the NgIf
directive and an ngTemplateContextGuard static method to NgFor. The
function of these two static methods is to enable type narrowing
within generated type checking code for consumers of the directives.
PR Close#26203
cexbrayat
Kara Erickson
Kristiyan Kostadinov
George Kalpakas
Alex Rickabaugh
JiaLiPassion
Igor Minar
Paul Gschwendtner
Matias Niemelä
Pawel Kozlowski
Judy Bogart
Joey Perrott
Alex Eagle
Greg Magolan
Pete Bacon Darwin
Olivier Combe
Ben Lesh
Santosh Yadav
Misko Hevery
Brandon
JoostK
Jason Aden
Xin Gao
Alan Agius
Adam Plumer
deebloo
Filipe Silva
Carlos Ortiz García
Marc Laval
Andrew Seguin
Renan Montebelo
Wassim Chegham
Cody Schroeder
Andrew Kushnir
Jeremy Elbourn
Daniel Ruf
alsami
Teamop
Fabian Wiles
Alex Eagle
Keen Yee Liau
Lars Gyrup Brink Nielsen
Joost Zöllner
Alex Eagle
Manduro