In environments such as the Language Service where inline type-checking code
is not supported, the compiler would previously produce a diagnostic when a
template would require inlining to check. This happened whenever its
component class had generic parameters with bounds that could not be safely
reproduced in an external TCB. However, this created a bad user experience
for the Language Service, as its features would then not function with such
templates.
Instead, this commit changes the compiler to use the same strategy for
inline TCBs as it does for inline type constructors - falling back to `any`
for generic types when inlining isn't available. This allows the LS to
support such templates with slightly weaker type-checking semantics, which
a test verifies. There is still a case where components that aren't
exported require an inline TCB, and the compiler will still generate a
diagnostic if so.
Fixes#41395
PR Close#41513
Previously, the `DefaultImportRecorder` interface was used as follows:
1. During the analysis phase, the default import declaration of an
identifier was recorded.
2. During the emit phase each emitted identifier would be recorded.
The information from step 1 would then be used to determine the
default import declaration of the identifier which would be
registered as used.
3. A TypeScript transform would taint all default imports that were
registered as used in step 2 such that the imports are not elided
by TypeScript.
In incremental compilations, a file may have to be emitted even if its
analysis data has been reused from the prior compilation. This would
mean that step 1 is not executed, resulting in a mismatch in step 2 and
ultimately in incorrectly eliding the default. This was mitigated by
storing the mapping from identifier to import declaration on the
`ts.SourceFile` instead of a member of `DefaultImportTracker` such that
it would also be visible to the `DefaultImportRecorder` of subsequent
compiles even if step 1 had not been executed.
Ultimately however, the information that is being recorded into the
`DefaultImportRecorder` has a longer lifetime than a single
`DefaultImportRecorder` instance, as that is only valid during a single
compilation whereas the identifier to import declaration mapping
outlives a single compilation. This commit replaces the registration of
this mapping by attaching the default import declaration on the output
AST node that captures the identifier. This enables the removal of
all of the `DefaultImportRecorder` usages throughout the analysis phase
together with the `DefaultImportRecorder` interface itself.
PR Close#41557
The Angular compiler has to actively keep default import statements
alive if they were only used in type-only positions, but have been
emitted as value expressions for DI purposes. A problem occurred in
incremental recompilations, where the relationship between an identifier
usage and its corresponding default import would not be considered. This
could result in the removal of the default import statement and caused
a `ReferenceError` at runtime.
This commit fixes the issue by storing the association from an
identifier to its default import declaration on the source file itself,
instead of within the `DefaultImportTracker` instance. The
`DefaultImportTracker` instance is only valid for a single compilation,
whereas the association from an identifier to a default import
declaration is valid as long as the `ts.SourceFile` is the same
instance.
A subsequent commit refactor the `DefaultImportTracker` to no longer
be responsible for registering the association, as its lifetime is
conceptually too short to do so.
Fixes#41377
PR Close#41557
The `emitDecoratorMetadata` compiler option does not have to be enabled
as Angular decorators are transformed by the AOT compiler. Having the
option enabled in our tests can hide issues around import preservation,
as with `emitDecoratorMetadata` enabled the TypeScript compiler itself
does not elide imports even if they are only used in type-positions.
This is unlike having `emitDecoratorMetadata` disabled, however; in that
case the Angular compiler has to actively trick TypeScript into
retaining default imports when an identifier in a type-only position has
been reified into a value position for DI purposes.
A subsequent commit addresses a bug in default import preservation
that relies on this flag being `false`.
PR Close#41557
In Angular CLI 12, application can only be compiled using Ivy, therefore we shouldn't run these tests when Bazel runs with View Engine context.
PR Close#41434
This is a temporary workaround until the CLI version containing a fix for the regression caused by deacc74 is available on NPM.
Without this change CLI builds will fail with;
```
angularCompiler.getNextProgram is not a function
```
PR Close#41434
With this change we add several packages to ignored `ignoreDeps` as these packages cannot be updated safely as they cause a large number of errors.
In addition, we add a group for `remark` packages.
PR Close#41434
With this change we update several dependencies to avoid Renovate creating a lot of PRs during onboarding. We also remove yarn workspaces as after further analysis these are not needed.
Certain dependencies such as `@octokit/rest`, `remark` and `@babel/*` have not been updated as they require a decent amount of work to update, and it's best to leave them for a seperate PR.
PR Close#41434
Creates a singleton class for GitClient rather than relying on creating an instance to
require being passed around throughout its usages.
PR Close#41515
This commit refactors the generated code for class metadata in partial
compilation mode. Instead of emitting class metadata into a top-level
`ɵsetClassMetadata` call guarded by `ngDevMode` flags, the class
metadata is now declared using a top-level `ɵɵngDeclareClassMetadata`
call.
PR Close#41200
This commit marks the `compilationMode` compiler option as stable, such
that libraries can be compiled in partial compilation mode.
In partial compilation mode, the compiler's output changes from fully
compiled AOT definitions to an intermediate form using partial
declarations. This form is suitable to be published to NPM, which now
allows libraries to be compiled and published using the Ivy compiler.
Please be aware that libraries that have been compiled using this mode
can only be used in Angular 12 applications and up; they cannot be used
when Ivy is disabled (i.e. when using View Engine) or in versions of
Angular prior to 12. The `compilationMode` option has no effect if
`enableIvy: false` is used.
Closes#41496
PR Close#41518
Fixes an error that will be thrown if `DebugRenderer2.destroyNode` is called with a node that has already been destroyed. The error happened, because we had a non-null assertion, even though the value can be null.
Note that this fix applies only to ViewEngine, because Ivy doesn't provide the `DebugRenderer2`. I decided to resolve it, because it fix is straightforward and this error has been showing up in our logs for a long time now, making actual errors harder to find.
PR Close#41565
During merging with `ng-dev pr merge` tooling will ensure that pull requests are
properly labeled for breaking changes. Pull requests with commits noting breaking
changes must also be labeled as such, additionally pull requests with breaking
change labels must contain commits noting breaking changes.
Fixes#38776
PR Close#41546
With the work done in #41291, the compiler always tracks the last known
program, so there's no need to track the program in the compiler factory
anymore.
PR Close#41517
After updating to use the v4 graphql api in the merge tooling, the githubTargetBranch
was set to be the sha of the latest commit rather than the branch name of the target
branch. This caused our tooling to mismatch which branches were actually being targeted
with the effect that if a PR targeted only the patch branch (i.e. labeled `target: patch`
and targeting `11.2.x` in github)it would still expect to merge into both `11.2.x` and
`master`. This is now corrected to once again use the branch name, restoring to the
previous functionality.
PR Close#41523
This commit adds a base class that contains common logic for all ControlValueAccessors defined in Forms package. This allows to remove duplicated logic from all built-in ControlValueAccessor classes.
PR Close#41225
This commit removes the line to set `currentNavigation` to `null` in the
navigation transitions subscription of the router. This logic is
already handled in the `finalize` stage of the transition pipe and has
been found to cause issues if a new navigation is triggered from a
subscription to the `NavigationEnd` event.
fixes#37460
PR Close#41262
`NgCompiler` previously had a notion of the "next" `ts.Program`, which
served two purposes:
* it allowed a client using the `ts.createProgram` API to query for the
latest program produced by the previous `NgCompiler`, as a starting
point for building the _next_ program that incorporated any new user
changes.
* it allowed the old `NgCompiler` to be queried for the `ts.Program` on
which all prior state is based, which is needed to compute the delta
from the new program to ultimately determine how much of the prior
state can be reused.
This system contained a flaw: it relied on the `NgCompiler` knowing when
the `ts.Program` would be changed. This works fine for changes that
originate in `NgCompiler` APIs, but a client of the `TemplateTypeChecker`
may use that API in ways that create new `ts.Program`s without the
`NgCompiler`'s knowledge. This caused the `NgCompiler`'s concept of the
"next" program to get out of sync, causing incorrectness in future
incremental analysis.
This refactoring cleans up the compiler's `ts.Program` management in
several ways:
* `TypeCheckingProgramStrategy`, the API which controls `ts.Program`
updating, is renamed to the `ProgramDriver` and extracted to a separate
ngtsc package.
* It loses its responsibility of determining component shim filenames. That
functionality now lives exclusively in the template type-checking package.
* The "next" `ts.Program` concept is renamed to the "current" program, as
the "next" name was misleading in several ways.
* `NgCompiler` now wraps the `ProgramDriver` used in the
`TemplateTypeChecker` to know when a new `ts.Program` is created,
regardless of which API drove the creation, which actually fixes the bug.
PR Close#41291
This commit changes the partial compilation so that it outputs declarations
rather than definitions for injectables.
The JIT compiler and the linker are updated to be able to handle these
new declarations.
PR Close#41316
The other similar interfaces were renamed in https://github.com/angular/angular/pull/41119,
but this one was left since it had existed before Ivy. It looks like the interface was
never actually exposed on npm so it is safe to rename this one too.
PR Close#41316
When we deactivate a child route, we deactivate its outlet as well as
its children. We also need to clear the stored information about the
route and the associated component.
If we do not, the context will keep these references and can result in
reactivating an outlet that was deactivated by the previous navigation.
Fixes#41379
PR Close#41381
Previously, the search index info file contained an array of strings that is
the dictionary of terms in the corpus.
Storing this as a space separated string reduces the size of the file.
PR Close#41447
Rather than relying on a preinstall script, set `engine-strict` to `true` in a
project `.npmrc` file, relying on the `engines` having `npm` set to note that
yarn should be used instead.
---
Output from `npm install` changes from:
```
$ npm install
> angular-srcs@12.0.0-next.7 preinstall /usr/local/account/js/angular
> node tools/yarn/check-yarn.js
/usr/local/account/js/angular/tools/yarn/check-yarn.js:12
throw new Error(
^
Error: Please use Yarn instead of NPM to install dependencies. See: https://yarnpkg.com/lang/en/docs/install/
at Object.<anonymous> (/usr/local/account/js/angular/tools/yarn/check-yarn.js:12:9)
at Module._compile (internal/modules/cjs/loader.js:778:30)
at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
at Module.load (internal/modules/cjs/loader.js:653:32)
at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
at Function.Module._load (internal/modules/cjs/loader.js:585:3)
at Function.Module.runMain (internal/modules/cjs/loader.js:831:12)
at startup (internal/bootstrap/node.js:283:19)
at bootstrapNodeJSCore (internal/bootstrap/node.js:623:3)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! angular-srcs@12.0.0-next.7 preinstall: `node tools/yarn/check-yarn.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the angular-srcs@12.0.0-next.7 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/account/.npm/_logs/2021-04-06T22_54_02_292Z-debug.log
```
to
```
$ npm install
npm ERR! code ENOTSUP
npm ERR! notsup Unsupported engine for angular-srcs@12.0.0-next.7: wanted: {"node":">=10.19.0 <13.0.0","yarn":">=1.22.4 <2","npm":"Plesae use yarn instead of NPM to install dependencies"} (current: {"node":"10.20.1","npm":"6.14.4"})
npm ERR! notsup Not compatible with your version of node/npm: angular-srcs@12.0.0-next.7
npm ERR! notsup Not compatible with your version of node/npm: angular-srcs@12.0.0-next.7
npm ERR! notsup Required: {"node":">=10.19.0 <13.0.0","yarn":">=1.22.4 <2","npm":"Plesae use yarn instead of NPM to install dependencies"}
npm ERR! notsup Actual: {"npm":"6.14.4","node":"10.20.1"}
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/account/.npm/_logs/2021-04-06T22_53_23_912Z-debug.log
```
PR Close#41477
* We had a usage of `Observable.subscribe` that uses the deprecated signature with 3 arguments. These changes switch to the non-deprecated version that passes in an `Observer`.
* Avoids always creating a `complete` callback since it isn't required.
* We were repeating all of the internal callbacks twice: once for sync and once for async. These changes move them out into variables so that they're more minifier-friendly. The savings aren't huge (~100 bytes minified), but it doesn't add any maintenance effort on our end so I decided to add it.
PR Close#41450
Add a property, `targetLabelExemptScopes`, to the merge configuration allowing certain
scopes to be exempted from requirements for features and breaking changes only included
in PRs targetting certain labels.
PR Close#41459
Check commits in pull requests to ensure the pr can be merged into the target branch. Confirms
that prs targeting minor do not contain breaking changes, and prs targeting patch or lts do not
contain breaking changes or `feat` commits.
PR Close#41459
Alex Rickabaugh
Alan Cohen
JoostK
Alan Agius
Pete Bacon Darwin
Joey Perrott
Benjamin Kindle
Kristiyan Kostadinov
Sagar Pandita
Keen Yee Liau
Aristeidis Bampakos
Andrew Kushnir
Andrew Scott
Zack DeRose
Paul Muriel Biya-Bi