During merging with `ng-dev pr merge` tooling will ensure that pull requests are
properly labeled for breaking changes. Pull requests with commits noting breaking
changes must also be labeled as such, additionally pull requests with breaking
change labels must contain commits noting breaking changes.
Fixes#38776
PR Close#41546
With the work done in #41291, the compiler always tracks the last known
program, so there's no need to track the program in the compiler factory
anymore.
PR Close#41517
After updating to use the v4 graphql api in the merge tooling, the githubTargetBranch
was set to be the sha of the latest commit rather than the branch name of the target
branch. This caused our tooling to mismatch which branches were actually being targeted
with the effect that if a PR targeted only the patch branch (i.e. labeled `target: patch`
and targeting `11.2.x` in github)it would still expect to merge into both `11.2.x` and
`master`. This is now corrected to once again use the branch name, restoring to the
previous functionality.
PR Close#41523
This commit adds a base class that contains common logic for all ControlValueAccessors defined in Forms package. This allows to remove duplicated logic from all built-in ControlValueAccessor classes.
PR Close#41225
This commit removes the line to set `currentNavigation` to `null` in the
navigation transitions subscription of the router. This logic is
already handled in the `finalize` stage of the transition pipe and has
been found to cause issues if a new navigation is triggered from a
subscription to the `NavigationEnd` event.
fixes#37460
PR Close#41262
`NgCompiler` previously had a notion of the "next" `ts.Program`, which
served two purposes:
* it allowed a client using the `ts.createProgram` API to query for the
latest program produced by the previous `NgCompiler`, as a starting
point for building the _next_ program that incorporated any new user
changes.
* it allowed the old `NgCompiler` to be queried for the `ts.Program` on
which all prior state is based, which is needed to compute the delta
from the new program to ultimately determine how much of the prior
state can be reused.
This system contained a flaw: it relied on the `NgCompiler` knowing when
the `ts.Program` would be changed. This works fine for changes that
originate in `NgCompiler` APIs, but a client of the `TemplateTypeChecker`
may use that API in ways that create new `ts.Program`s without the
`NgCompiler`'s knowledge. This caused the `NgCompiler`'s concept of the
"next" program to get out of sync, causing incorrectness in future
incremental analysis.
This refactoring cleans up the compiler's `ts.Program` management in
several ways:
* `TypeCheckingProgramStrategy`, the API which controls `ts.Program`
updating, is renamed to the `ProgramDriver` and extracted to a separate
ngtsc package.
* It loses its responsibility of determining component shim filenames. That
functionality now lives exclusively in the template type-checking package.
* The "next" `ts.Program` concept is renamed to the "current" program, as
the "next" name was misleading in several ways.
* `NgCompiler` now wraps the `ProgramDriver` used in the
`TemplateTypeChecker` to know when a new `ts.Program` is created,
regardless of which API drove the creation, which actually fixes the bug.
PR Close#41291
This commit changes the partial compilation so that it outputs declarations
rather than definitions for injectables.
The JIT compiler and the linker are updated to be able to handle these
new declarations.
PR Close#41316
The other similar interfaces were renamed in https://github.com/angular/angular/pull/41119,
but this one was left since it had existed before Ivy. It looks like the interface was
never actually exposed on npm so it is safe to rename this one too.
PR Close#41316
When we deactivate a child route, we deactivate its outlet as well as
its children. We also need to clear the stored information about the
route and the associated component.
If we do not, the context will keep these references and can result in
reactivating an outlet that was deactivated by the previous navigation.
Fixes#41379
PR Close#41381
Previously, the search index info file contained an array of strings that is
the dictionary of terms in the corpus.
Storing this as a space separated string reduces the size of the file.
PR Close#41447
Rather than relying on a preinstall script, set `engine-strict` to `true` in a
project `.npmrc` file, relying on the `engines` having `npm` set to note that
yarn should be used instead.
---
Output from `npm install` changes from:
```
$ npm install
> angular-srcs@12.0.0-next.7 preinstall /usr/local/account/js/angular
> node tools/yarn/check-yarn.js
/usr/local/account/js/angular/tools/yarn/check-yarn.js:12
throw new Error(
^
Error: Please use Yarn instead of NPM to install dependencies. See: https://yarnpkg.com/lang/en/docs/install/
at Object.<anonymous> (/usr/local/account/js/angular/tools/yarn/check-yarn.js:12:9)
at Module._compile (internal/modules/cjs/loader.js:778:30)
at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
at Module.load (internal/modules/cjs/loader.js:653:32)
at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
at Function.Module._load (internal/modules/cjs/loader.js:585:3)
at Function.Module.runMain (internal/modules/cjs/loader.js:831:12)
at startup (internal/bootstrap/node.js:283:19)
at bootstrapNodeJSCore (internal/bootstrap/node.js:623:3)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! angular-srcs@12.0.0-next.7 preinstall: `node tools/yarn/check-yarn.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the angular-srcs@12.0.0-next.7 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/account/.npm/_logs/2021-04-06T22_54_02_292Z-debug.log
```
to
```
$ npm install
npm ERR! code ENOTSUP
npm ERR! notsup Unsupported engine for angular-srcs@12.0.0-next.7: wanted: {"node":">=10.19.0 <13.0.0","yarn":">=1.22.4 <2","npm":"Plesae use yarn instead of NPM to install dependencies"} (current: {"node":"10.20.1","npm":"6.14.4"})
npm ERR! notsup Not compatible with your version of node/npm: angular-srcs@12.0.0-next.7
npm ERR! notsup Not compatible with your version of node/npm: angular-srcs@12.0.0-next.7
npm ERR! notsup Required: {"node":">=10.19.0 <13.0.0","yarn":">=1.22.4 <2","npm":"Plesae use yarn instead of NPM to install dependencies"}
npm ERR! notsup Actual: {"npm":"6.14.4","node":"10.20.1"}
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/account/.npm/_logs/2021-04-06T22_53_23_912Z-debug.log
```
PR Close#41477
* We had a usage of `Observable.subscribe` that uses the deprecated signature with 3 arguments. These changes switch to the non-deprecated version that passes in an `Observer`.
* Avoids always creating a `complete` callback since it isn't required.
* We were repeating all of the internal callbacks twice: once for sync and once for async. These changes move them out into variables so that they're more minifier-friendly. The savings aren't huge (~100 bytes minified), but it doesn't add any maintenance effort on our end so I decided to add it.
PR Close#41450
Add a property, `targetLabelExemptScopes`, to the merge configuration allowing certain
scopes to be exempted from requirements for features and breaking changes only included
in PRs targetting certain labels.
PR Close#41459
Check commits in pull requests to ensure the pr can be merged into the target branch. Confirms
that prs targeting minor do not contain breaking changes, and prs targeting patch or lts do not
contain breaking changes or `feat` commits.
PR Close#41459
Currently, we throw a FatalDiagnosticError when we fail to load a resource
(`templateUrl` or `styleUrl`) at various stages in the compiler. This prevents
analysis of the component from completing. This will result in in users not being
able to get any information in the component template when there is a missing
`styleUrl`, for example.
This commit simply tracks the diagnostic, marks the component as poisoned, and
continues merrily along. Environments configured to use poisoned data
(like the language service) will then be able to use other information from the analysis.
Fixes https://github.com/angular/vscode-ng-language-service/issues/1241
PR Close#41403
As the `test` and `refactor` commit types are not used in release notes and there
are solid use cases for having multiple scopes/scopeless uses of these types, they
are made to be optional instead of required on commits.
PR Close#41486
Previously, the `angular-in-memory-web-api` package was built in
`dist/packages-dist/misc/angular-in-memory-web-api/`. This was different
from other Angular packages, which were placed directly in
`dist/packages-dist/`. This caused the `create-package-archives.sh`
script to create an invalid `misc.tgz` archive (i.e. treating the
`misc/` subdirectory as a package).
See, for example, the artifacts [here][1].
This commit changes the build scripts to have the
`angular-in-memory-web-api` package built in
`dist/angular-in-memory-web-api-dist/`, similar to how the `zone.js`
package is handled. It also updates the CircleCI config to correctly
publish the `angular-in-memory-web-api` package to CI build artifacts.
[1]: https://circleci.com/gh/angular/angular/951491
PR Close#41429
This commit updates the `build-ivy-npm-packages.js` script to also build
the `angular-in-memory-web-api` package. This could be used if someone
wanted to test the Ivy packages in docs examples or an integration test.
PR Close#41429
This commit makes the build scripts for the various packages (framework,
`@angular/dev-infra-private`, `angular-in-memory-web-api`, `zone.js`)
consistent. This makes it easier to maintain them (e.g. make similar
changes across all build scripts).
PR Close#41429
This commit enables linting for the scripts in
`aio/tools/ng-packages-installer/`. It also makes the necessary changes
to the files to make linting pass.
PR Close#41429
This commit updates the `eslint` and `eslint-plugin-jasmine` packages to
latest versions to take advantage of latest fixes and improvements.
PR Close#41429
For commits from git log entries additional fields are available such as the reference
hash and author name, update the utility functions in commit-message to include the
parsed fields. Additionally define, per commit message type, whether to include the
commit in a release notes entry.
PR Close#41458
Create a utility method for the latest git tag, sorted by committerdate, which
matches SemVer, representing the latest version released on the branch.
PR Close#41455
Joey Perrott
Pete Bacon Darwin
Sagar Pandita
Keen Yee Liau
Alan Agius
Aristeidis Bampakos
Andrew Kushnir
Andrew Scott
Alex Rickabaugh
Kristiyan Kostadinov
Zack DeRose
Paul Muriel Biya-Bi
Andrew Scott
George Kalpakas
JounQin
josemontespg