Prior to this change `projectDef` instructions were placed to root templates only, thus the necessary information (selectors) in nested templates was missing. This update adds the logic to insert `projectDef` instructions to all templates where <ng-content> is present.
PR Close#27384
Previously ngtsc assumed resource files (templateUrl, styleUrls) would be
physically present in the file system relative to the .ts file which
referenced them. However, ngc previously resolved such references in the
context of ts.CompilerOptions.rootDirs. Material depends on this
functionality in its build.
This commit introduces resolution of resources by leveraging the TypeScript
module resolver, ts.resolveModuleName(). This resolver is used in a way
which will never succeed, but on failure will return a list of locations
checked. This list is then filtered to obtain the correct potential
locations of the resource.
PR Close#27357
This commit adds support for resolution of styleUrls to ngtsc. Previously
this field was never read, and so components with styleUrls would appear
unstyled after compilation.
PR Close#27357
When a single resource is preloaded twice in ngtsc, the second request
would be recognized as in-flight in which case `undefined` would
be returned, which signals to the compilation that is can resume
synchronously. The compilation would then proceed immediately and call
`load`, only to find out that the request is still in-flight which is
not allowed.
This commit caches the Promise of the in-flight fetch requests, such
that subsequent preload requests can return the corresponding Promise
instance.
PR Close#27357
* Currently when building a `ng_module` with Bazel and having the flat module id option set, the flat module files are not being generated because `@angular/compiler-cli` does not properly determine the entry-point file.
Note that this logic is not necessarily specific to Bazel and the same problem can happen without Bazel if multiple TypeScript input files are specified while the `flatModuleIndex` option has been enabled.
PR Close#27200
For ngcc's processing of ES5 bundles, the spread syntax has been
downleveled from `[...ARRAY]` to become `ARRAY.slice()`. This commit
adds basic support for static resolution of such call.
PR Close#27158
The problem was caused by missing `allocateBindingSlots` that led to incorrect # of vars defined for components and as a result, causing errors at runtime. Now all `bind` operation are accounted for and the number of `vars` is correct.
PR Close#27338
The problem was caused by the self-closing i18n instruction that was generated in case we have styling instructions defined for a component. As a result, that caused problems at runtime. This update adds extra check to avoid creating self-closing i18n instructions (create i18nStart and i18nEnd instructions instead) when styling instructions are present.
PR Close#27330
Ngcc will now render additional exports for classes that are referenced in
`NgModule` decorated classes, but which were not publicly exported
from an entry-point of the package.
This is important because when ngtsc compiles libraries processed by ngcc
it needs to be able to publcly access decorated classes that are referenced
by `NgModule` decorated classes in order to build templates that use these
classes.
Doing this re-exporting is not without its risks. There are chances that
the class is not exported correctly: there may already be similarly named
exports from the entry-point or the class may be being aliased. But there
is not much more we can do from the point of view of ngcc to workaround
such scenarios. Generally, packages should have been built so that this
approach works.
PR Close#26906
There are a number of variables that need to be passed around
the program, in particular to the renderers, which benefit from being
stored in well defined objects.
The new `EntryPointBundle` structure is a specific format of an entry-point
and contains the compiled `BundleProgram` objects for the source and typings,
if appropriate.
This change helps with future refactoring, where we may need to add new
properties to this object. It allows us to maintain more stable APIs between
the constituent parts of ngcc, rather than passing lots of primitive values
around throughout the program.
PR Close#26906
The `NgModuleDecoratorHandler` can now register all the references that
it finds in the `NgModule` metadata, such as `declarations`, `imports`,
`exports` etc.
This information can then be used by ngcc to work out if any of these
references are internal only and need to be manually exported from a
library's entry-point.
PR Close#26906
By inverting the relationship between `EntryPointPaths` and
`EntryPointFormat` we can have interfaces rather than types.
Thanks to @gkalpak for this idea.
PR Close#26906
If a decorated class is not publicly exported via an entry-point then the
previous approach to finding the associated typings file failed.
Now we ensure that we extract all the class declarations from the
dtsTypings program, even if they are not exported from the entry-point.
This is achieved by also parsing statements of each source file, rather
than just parsing classes that are exported from the entry-point.
Because we now look at all the files, it is possible for there to be multiple
class declarations with the same local name. In this case, only the first
declaration with a given name is added to the map; subsequent classes are
ignored.
We are most interested in classes that are publicly exported from the
entry-point, so these are added to the map first, to ensure that they are
not ignored.
PR Close#26906
Previously the concept of multiple directives with the same selector was
not supported by ngtsc. This is due to the treatment of directives for a
component as a Map from selector to the directive, which is an erroneous
representation.
Now the directives for a component are stored as an array which supports
multiple directives with the same selector.
Testing strategy: a new ngtsc_spec test asserts that multiple directives
with the same selector are matched on an element.
PR Close#27298
These tests are not relevant to Ivy:
//packages/compiler-cli/test/diagnostics:check_types
//packages/compiler-cli/test/diagnostics:expression_diagnostics
//packages/compiler-cli/test/transformers:test
//packages/compiler-cli/test:extract_i18n
The //packages/compiler-cli/test:ngtools_api test has 2 specs, one of
which passes and the other of which depends on ngtsc supporting lazy
routes. It's now disabled with fixmeIvy().
PR Close#27301
These paths are no longer needed / used.
I had to disable one jit mode spec because it fails now that we actually run it.
I root caused the jit test failure as missing forwardRef support. See FW-645.
PR Close#27278
When ngtsc compiles @angular/core, it rewrites core imports to the
r3_symbols.ts file that exposes all internal symbols under their
external name. When creating the FESM bundle, the r3_symbols.ts file
causes the external symbol names to be rewritten to their internal name.
Under ngcc compilations of FESM bundles, the indirection of
r3_symbols.ts is no longer in place such that the external names are
retained in the bundle. Previously, the external name `ɵdefineNgModule`
was explicitly declared internally to resolve this issue, but the
recently added `setClassMetadata` was not declared as such, causing
runtime errors.
Instead of relying on the r3_symbols.ts file to perform the rewrite of
the external modules to their internal variants, the translation is
moved into the `ImportManager` during the compilation itself. This
avoids the need for providing the external name manually.
PR Close#27055
Now that the Ivy switch transform uses ts.getMutableClone() to copy
statements, there's no need to set .parent pointers on the resulting
updated nodes. Doing this was causing assertion failures deep in
TypeScript in some cases.
PR Close#27170
Make a copy of the ts.SourceFile before modifying it in the ivy_switch
transform. It's suspected that the Bazel tsc_wrapped host's SourceFile
cache has issues when the ts.SourceFiles are mutated.
PR Close#27032
In a more specific scenario: Considering people use a custom TypeScript compiler host with `NGC`, they _could_ expect only posix paths in methods like `writeFile`. This at first glance sounds like a trivial issue that should be just fixed by the actual compiler host, but usually TypeScript internal API's just pass around posix normalized paths, and therefore it would be good to follow the same standards when passing JSON genfiles to the `CompilerHost`.
For normal TypeScript files (and TS genfiles), this is already consistent because those will be handled by the actual TypeScript `Program` (see `emitCallback`).
PR Close#27062
This fixes an issue where packages would be skipped if they contained
e.g. RxJS 5 style imports such as
```
import { observeOn } from 'rxjs/operators/observeOn';
```
Given that no package.json file can be found at the imported path, the
dependency would be reported missing, causing the package to be skipped.
PR Close#27031
Previously the ivy definition calls we going directly after the
class constructor function But this meant that the lifecycle
hooks attached to the prototype were ignored by the ngtsc
compiler.
Now the definitions are written to the end of the IIFE block,
just before the return statement.
Closes#26849
PR Close#26856
For each package entry-point there is only one format that
is used to compile the typings files (.d.ts). This will be
either esm2015 or fesm2015 (preferred). So we would not run
any dts processing in the renderer if we are not compiling
the appropriate format.
PR Close#26403
1) The `DecorationAnalyzer now analyzes all source files, rather than just
the entry-point files, which fixes#26183.
2) The `DecoratorAnalyzer` now runs all the `handler.analyze()` calls
across the whole entry-point *before* running `handler.compile()`. This
ensures that dependencies between the decorated classes *within* an
entry-point are known to the handlers when running the compile process.
3) The `Renderer` now does the transformation of the typings (.d.ts) files
which allows us to support packages that only have flat format
entry-points better, and is faster, since we won't parse `.d.ts` files twice.
PR Close#26403
The rendering of typings is not specific to the package
format, so it doesn't make sense to put it in a specific
renderer.
As a result there is no real difference between esm5 and esm2015
renderers, so there is no point in having separate classes.
PR Close#26403
Previously we always used the non-flat format because we thought
that this was the one that would always be available.
It turns out that this is not the case and that only one of the flat and
non-flat formats may be available.
Therefore we should use whichever is available, defaulting to the flat
format if that exists, since that will be faster to parse.
PR Close#26403
Going forward we need to be able to do the same work on both
flat and non-flat module formats (such as computing arity and
transforming .d.ts files)
PR Close#26403
The Material project uses slightly different properties to the
core Angular project for specifying the different format entry-point.
This commit ensures that we map these properties correctly for both
types of project.
PR Close#26403
The `NgModule` handler generates `R3References` for its declarations, imports,
exports, and bootstrap components, based on the relative import path
between the module and the classes it's referring to. This works fine for
compilation of a .ts Program inside ngtsc, but in ngcc the import needed
in the .d.ts file may be very different to the import needed between .js
files (for example, if the .js files are flattened and the .d.ts is not).
This commit introduces a new API in the `ReflectionHost` for extracting the
.d.ts version of a declaration, and makes use of it in the
`NgModuleDecorationHandler` to write a correct expression for the `NgModule`
definition type.
PR Close#26403
This commit causes a call to setClassMetadata() to be emitted for every
type being compiled by ngtsc (every Angular type). With this metadata,
the TestBed should be able to recompile these classes when overriding
decorator information.
Testing strategy: Tests in the previous commit for
generateSetClassMetadataCall() verify that the metadata as generated is
correct. This commit enables the generation for each DecoratorHandler,
and a test is added to ngtsc_spec to verify all decorated types have
metadata generated for them.
PR Close#26860
This commit introduces generateSetClassMetadataCall(), an API in ngtsc
for generating calls to setClassMetadata() for a given declaration. The
reflection API is used to enumerate Angular decorators on the declaration,
which are converted to a format that ReflectionCapabilities can understand.
The reflection metadata is then patched onto the declared type via a call
to setClassMetadata().
This is simply a utility, a future commit invokes this utility for
each DecoratorHandler.
Testing strategy: tests are included which exercise generateSetClassMetadata
in isolation.
PR Close#26860
This commit introduces the setClassMetadata() private function, which
adds metadata to a type in a way that can be accessed via Angular's
ReflectionCapabilities. Currently, it writes to static fields as if
the metadata being added was downleveled from decorators by tsickle.
The plan is for ngtsc to emit code which calls this function, passing
metadata on to the runtime for testing purposes. Calls to this function
would then be tree-shaken away for production bundles.
Testing strategy: proper operation of this function will be an integral
part of TestBed metadata overriding. Angular core tests will fail if this
is broken.
PR Close#26860
Previously, the Directive, Injectable, and Pipe DecoratorHandlers were
directly returning @angular/compiler metadata from their analyze() steps.
This precludes returning any additional information along with that
metadata. This commit introduces a wrapper interface for these handlers,
opening the door for additional information to be returned from analyze().
Testing strategy: this is a refactor commit, existing test coverage is
sufficient.
PR Close#26860
Previously the ReflectionHost API only returned the names of decorators
and not a reference to their TypeScript Identifier. This commit adds
the identifier itself, so that a consumer can write references to the
decorator.
Testing strategy: this commit is trivial, and the functionality will be
exercised by downstream tests.
PR Close#26860
Uglify and other tree-shakers attempt to determine if the invocation
of a function is side-effectful, and remove it if so (and the result
is unused). A /*@__PURE__*/ annotation on the call site can be used
to hint to the optimizer that the invocation has no side effects and
is safe to tree-shake away.
This commit adds a 'pure' flag to the output AST function call node,
which can be used to signal to downstream emitters that a pure
annotation should be added. It also modifies ngtsc's emitter to
emit an Uglify pure annotation when this flag is set.
Testing strategy: this will be tested via its consumers, by asserting
that pure functions are translated with the correct comment.
PR Close#26860
* No longer depends on a custom CircleCI docker image that comes with Bazel pre-installed. Since Bazel is now available through NPM, we should be able to use the version from `@bazel/bazel` in order to enforce a consistent environment on CI and locally.
* This also reduces the amount of packages that need to be published (ngcontainer is removed)
PR Close#26691
This makes yarn_install of ngdeps under Bazel faster, since we don't need many of the large dependencies.
It's important because downstream angular/bazel users will observe the same install time.
PR Close#26691
These tests were previously not running on CI so they have always been broken,
or got broken just recently :-(.
test(ivy): mark failing test targets with fixme-ivy-jit and fixme-ivy-local tags
PR Close#26735
We are close enough to blacklist a few test targets, rather than whitelist targets to run...
Because bazel rules can be composed of other rules that don't inherit tags automatically,
I had to explicitly mark all of our ts_library and ng_module targes with "ivy-local" and
"ivy-jit" tags so that we can create a query that excludes all fixme- tagged targets even
if those targets are composed of other targets that don't inherit this tag.
This is the updated overview of ivy related bazel tags:
- ivy-only: target that builds or runs only under ivy
- fixme-ivy-jit: target that doesn't yet build or run under ivy with --compile=jit
- fixme-ivy-local: target that doesn't yet build or run under ivy with --compile=local
- no-ivy-jit: target that is not intended to build or run under ivy with --compile=jit
- no-ivy-local: target that is not intended to build or run under ivy with --compile=local
PR Close#26471
This commit adds generation of .ngsummary.js shims alongside .ngfactory.js
shims when generated files are enabled.
Generated .ngsummary shims contain a single, null export for every exported
class with decorators that exists in the original source files. Ivy code
does not depend on summaries, so these exist only as a placeholder to allow
them to be imported and their values passed to old APIs. This preserves
backwards compatibility.
Testing strategy: this commit adds a compiler test to verify the correct
shape and contents of the generated .ngsummary.js files.
PR Close#26495
This commit refactors the shim host to be agnostic to the shims being
generated, and provides an API for generating additional shims besides
the .ngfactory.js. This will be used in a following commit to generate
.ngsummary.js shims.
Testing strategy: this refactor introduces no new behavior, so it's
sufficient that the existing tests for factory shim generation continue
to pass.
PR Close#26495
This simple refactor of the build rules renames the .ngfactory.js shim
generator to 'shims' instead of 'factories', in preparation for adding
.ngsummary.js shim generation.
Testing strategy: this commit does not introduce any new behavior and
merely moves files and symbols around. It's sufficient that the existing
ngtsc tests pass.
PR Close#26495
Originally, the ivy_switch mechanism used Bazel genrules to conditionally
compile one TS file or another depending on whether ngc or ngtsc was the
selected compiler. This was done because we wanted to avoid importing
certain modules (and thus pulling them into the build) if Ivy was on or
off. This mechanism had a major drawback: ivy_switch became a bottleneck
in the import graph, as it both imports from many places in the codebase
and is imported by many modules in the codebase. This frequently resulted
in cyclic imports which caused issues both with TS and Closure compilation.
It turns out ngcc needs both code paths in the bundle to perform the switch
during its operation anyway, so import switching was later abandoned. This
means that there's no real reason why the ivy_switch mechanism needed to
operate at the Bazel level, and for the ivy_switch file to be a bottleneck.
This commit removes the Bazel-level ivy_switch mechanism, and introduces
an additional TypeScript transform in ngtsc (and the pass-through tsc
compiler used for testing JIT) to perform the same operation that ngcc
does, and flip the switch during ngtsc compilation. This allows the
ivy_switch file to be removed, and the individual switches to be located
directly next to their consumers in the codebase, greatly mitigating the
circular import issues and making the mechanism much easier to use.
As part of this commit, the tag for marking switched variables was changed
from __PRE_NGCC__ to __PRE_R3__, since it's no longer just ngcc which
flips these tags. Most variables were renamed from R3_* to SWITCH_* as well,
since they're referenced mostly in render2 code.
Test strategy: existing test coverage is more than sufficient - if this
didn't work correctly it would break the hello world and todo apps.
PR Close#26550
The 'animations' field of @Component metadata should be copied directly
into the ngComponentDef for that component and should not pass through
static resolution.
Previously the animations array was statically resolved and then the
values were translated back when generating ngComponentDef.
PR Close#26322
Previously we only removed assignments to `Class.decorators = [];`
if the array was not empty.
Now we also remove calls to `__decorate([])`, similarly.
PR Close#26236
Previously, classes that were declared via variable declarations,
rather than class declarations, were being excluded from the
parsed classes.
PR Close#26236
The most recent Angular distributions have begun to use __decorate instead of Class.decorators.
This prevents `ngcc` from recognizing the classes and then fails to perform the transform to
ivy format.
Example:
```
var ApplicationModule = /** @class */ (function () {
// Inject ApplicationRef to make it eager...
function ApplicationModule(appRef) {
}
ApplicationModule = __decorate([
NgModule({ providers: APPLICATION_MODULE_PROVIDERS }),
__metadata("design:paramtypes", [ApplicationRef])
], ApplicationModule);
return ApplicationModule;
}());
```
Now `ngcc` recognizes `__decorate([...])` declarations and performs its transform.
See FW-379
PR Close#26236
In some formats variables are declared as `var` or `let` and only
assigned a value later in the code.
The ngtsc resolver still needs to be able to resolve this value,
so the host now provides a `host.getVariableValue(declaration)`
method that can do this resolution based on the format.
The hosts make some assumptions about the layout of the
code, so they may only work in the constrained scenarios that
ngcc expects.
PR Close#26236
This commit builds on the NgtscTestEnvironment helper work before and
introduces template_typecheck_spec.ts, which contains compiler tests
for template type-checking.
PR Close#26203
This commit gets ready for the introduction of ngtsc template
type-checking tests by refactoring test environment setup into a
custom helper. This helper will simplify the authoring of future
ngtsc tests.
Ngtsc tests previously returned a numeric error code (a la ngtsc's CLI
interface) if any TypeScript errors occurred. The helper has the
ability to run ngtsc and return the actual array of ts.Diagnostics, which
greatly increases the ability to write clean tests.
PR Close#26203
This commit enables generation and checking of a type checking ts.Program
whenever the fullTemplateTypeCheck flag is enabled in tsconfig.json. It
puts together all the pieces built previously and causes diagnostics to be
emitted whenever type errors are discovered in a template.
Todos:
* map errors back to template HTML
* expand set of type errors covered in generated type-check blocks
PR Close#26203
Before type checking can be turned on in ngtsc, appropriate metadata for
each component and directive must be determined. This commit adds tracking
of the extra metadata in *DefWithMeta types to the selector scope handling,
allowing for later extraction for type-checking purposes.
PR Close#26203
This commit introduces the template type-checking context API, which manages
inlining of type constructors and type-check blocks into ts.SourceFiles.
This API will be used by ngtsc to generate a type-checking ts.Program.
An TypeCheckProgramHost is provided which can wrap a normal ts.CompilerHost
and intercept getSourceFile() calls. This can be used to provide source
files with type check blocks to a ts.Program for type-checking.
PR Close#26203
This commit introduces the main functionality of the type-check compiler:
generation of type check blocks. Type check blocks are blocks of TypeScript
code which can be inlined into source files, and when processed by the
TypeChecker will give information about any typing errors in template
expressions.
PR Close#26203
Template type-checking will make use of expression and statement
translation as well as the ImportManager, so this code needs to
live in a separate build target which can be depended on by both
the main ngtsc transform as well as the template type-checking
mechanism. This refactor introduces a separate build target
for that code.
PR Close#26203
Previously in Ivy, metadata for directives/components/modules/etc was
carried in .d.ts files inside type information encoded on the
DirectiveDef, ComponentDef, NgModuleDef, etc types of Ivy definition
fields. This works well, but has the side effect of complicating Ivy's
runtime code as these extra generic type parameters had to be specified
as <any> throughout the codebase. *DefInternal types were introduced
previously to mitigate this issue, but that's the wrong way to solve
the problem.
This commit returns *Def types to their original form, with no metadata
attached. Instead, new *DefWithMeta types are introduced that alias the
plain definition types and add extra generic parameters. This way the
only code that needs to deal with the extra metadata parameters is the
compiler code that reads and writes them - the existence of this metadata
is transparent to the runtime, as it should be.
PR Close#26203
This commit introduces //packages/compiler-cli/src/ngtsc/typecheck as a
container for template type-checking code, and implements an initial API:
type constructor generation.
Type constructors are static methods on component/directive types with
no runtime implementation. The methods are used during compilation to
enable inference of a component or directive's generic type parameters
from the types of expressions bound to any of their @Inputs. A type
constructor looks like:
class Directive<T> {
someInput: T;
static ngTypeCtor<T>(init: Partial<Pick<Directive<T>, 'someInput'>>): Directive<T>;
}
It can be used to infer a type for T based on the input:
const _dir = Directive.ngTypeCtor({someInput: 'string'}); // Directive<T>
PR Close#26203
`TypeScript` only supports merging and extending of `compilerOptions`. This is an implementation to support extending and inheriting of `angularCompilerOptions` from multiple files.
Closes: #22684
PR Close#22717
Create getter methods `getXXXDef` for each definition which
uses `hasOwnProperty` to verify that we don't accidently read form the
parent class.
Fixes: #24011Fixes: #25026
PR Close#25736
Previously, if ngtsc encountered a VariableDeclaration without an
initializer, it would assume that the variable was undefined, and
return that result.
However, for symbols exported from external modules that resolve to
.d.ts files, variable declarations are of the form:
export declare let varName: Type;
This form also lacks an initializer, but indicates the presence of an
importable symbol which can be referenced. This commit changes the
static resolver to understand variable declarations with the 'declare'
keyword and to generate references when it encounters them.
PR Close#25775
The bootstrap property of @NgModule was not previously compiled by
the compiler in AOT or JIT modes (in Ivy). This commit adds support
for bootstrap.
PR Close#25775
Closure requires @nocollapse on Ivy definition static fields in order
to not convert them to standalone constants. However tsickle, the tool
which would ordinarily be responsible for adding @nocollapse, doesn't
properly annotate fields which are added synthetically via transforms.
So this commit adds @nocollapse by applying regular expressions against
code during the final write to disk.
PR Close#25775
`ngcc` adds marker files to each folder that has been
compiled, containing the version of the ngcc used.
When compiling, it will ignore folders that contain these
marker files, as long as the version matches.
PR Close#25557
Closure compiler requires that the i18n message constants of the form
const MSG_XYZ = goog.getMessage('...');
have names that are unique across an entire compilation, even if the
variables themselves are local to a given module. This means that in
practice these names must be unique in a codebase.
The best way to guarantee this requirement is met is to encode the
relative file name of the file into which the constant is being written
into the constant name itself. This commit implements that solution.
PR Close#25689
TypeScript has a more modern diagnostic emit function which produces
contextually annotated error information, using colors in the console
to indicate where in the code the error occurs.
This commit swiches ngtsc to use this format for diagnostics when
emitting them after a failed compilation.
PR Close#25647
This commit takes the first steps towards ngtsc producing real
TypeScript diagnostics instead of simply throwing errors when
encountering incorrect code.
A new class is introduced, FatalDiagnosticError, which can be thrown by
handlers whenever a condition in the code is encountered which by
necessity prevents the class from being compiled. This error type is
convertable to a ts.Diagnostic which represents the type and source of
the error.
Error codes are introduced for Angular errors, and are prefixed with -99
(so error code 1001 becomes -991001) to distinguish them from other TS
errors.
A function is provided which will read TS diagnostic output and convert
the TS errors to NG errors if they match this negative error code
format.
PR Close#25647
In tsc 3.0 the check that enables program structure reuse in tryReuseStructureFromOldProgram has changed
and now uses identity comparison on arrays within CompilerOptions. Since we recreate the options
on each incremental compilation, we now fail this check.
After this change the default set of options is reused in between incremental compilations, but we still
allow options to be overriden if needed.
PR Close#25275
This fixes a bug in ngtsc where each @Directive was compiled using a
separate ConstantPool. This resulted in two issues:
* Directive constants were not shared across the file
* Extra statements from directive compilation were dropped instead of
added to the file
This commit fixes both issues and adds a test to verify @Directive is
working properly.
PR Close#25620
This commit adds support for enumeration values. An enumeration value
is now a first-class return value of the resolver, which provides both
a Reference to the enum type itself and the name of the value from that
enum. Resolving an enum itself returns a Map<string, EnumValue>.
PR Close#25619
Ivy definitions in .d.ts files often reference the type of a class.
Sometimes, those classes have generic type parameters. When this is
the case, ngtsc needs to emit generic type parameters in the .d.ts
files (usually by passing 'any').
PR Close#25406
Since non-flat module formats (esm2015, esm5) have different structure
than their flat counterparts (and since we are operating on JS files
inside `node_modules/`, we need to configure TS to include deeply nested
JS files (by specifying a sufficiently high `maxNodeModuleJsDepth`).
Remains to be determined if this has any (noticeable) performance
implications.
PR Close#25406
In some code formats (e.g. ES5) methods can actually be function
expressions. For example:
```js
function MyClass() {}
// this static method is declared as a function expression
MyClass.staticMethod = function() { ... };
```
PR Close#25406
ngtsc's static resolver can evaluate function calls where parameters
have default values. In TypeScript code these default values live on the
function definition, but in ES5 code the default values are represented
by statements in the function body.
A new ReflectionHost method getDefinitionOfFunction() abstracts over
this difference, and allows the static reflector to more accurately
evaluate ES5 code.
PR Close#25406
A small bug caused base factory variable statements for @Component to
not be emitted properly. At the same time as this is fixed, those
statements are now emitted as const.
PR Close#25425
When @angular/core is compiled by ngtsc, a factory file is generated
for ApplicationModule, that is currently invalid because r3_symbols
does not export NgModuleFactory. This change fixes that issue and
ensures the generated ngfactory file for @angular/core is valid.
PR Close#25392
When generating the 'directives:' property of ngComponentDef, ngtsc
needs to be conscious of declaration order. If a directive being
written into the array is declarated after the component currently
being compiled, then the entire directives array needs to be wrapped
in a closure.
This commit fixes ngtsc to pay attention to such ordering issues
within directives arrays.
PR Close#25392
This commit creates an API for factory functions which allows them
to be inherited from one another. To do so, it differentiates between
the factory function as a wrapper for a constructor and the factory
function in ngInjectableDefs which is determined by a default
provider.
The new form is:
factory: (t?) => new (t || SomeType)(inject(Dep1), inject(Dep2))
The 't' parameter allows for constructor inheritance. A subclass with
no declared constructor inherits its constructor from the superclass.
With the 't' parameter, a subclass can call the superclass' factory
function and use it to create an instance of the subclass.
For @Injectables with configured providers, the factory function is
of the form:
factory: (t?) => t ? constructorInject(t) : provider();
where constructorInject(t) creates an instance of 't' using the
naturally declared constructor of the type, and where provider()
creates an instance of the base type using the special declared
provider on @Injectable.
PR Close#25392
Previously, ngtsc used a new ConstantPool for each decorator
compilation. This could result in collisions between constants in the
top-level scope.
Now, ngtsc uses a single ConstantPool for each source file being
compiled, and merges the constant statements into the file after the
import section.
PR Close#25392
The performCompilation() is always called with an undefined oldProgram option (even in watch mode).
This was regression introduced in: 957be960d2
Partial fix, discovered in: #21361
PR Close#21364
Inside of a nested template, an attempt to generate code for a banana-
in-a-box expression would cause a crash in the _AstToIrVisitor, as it
was not handling the case where a write would be generated to a local
variable.
This change supports such a mode of operation.
PR Close#25321
before:
```
Expected to find features 'import * as i0 from "@angular/core";
import { Directive, Input } from '@angular/core';
```
after:
```
Failed to find "template" after "...Component_Factory() { return new
MyComponent(); }," in:
'import * as i0 from "@angular/core";
import { Directive, Input } from '@angular/core';```
```
PR Close#25291
To match the View Engine behavior.
We should make this configurable so that the node injector is tree shaken when
directives do not need to be published.
PR Close#25291
Previously the compiler compliance tests ran and built test code with
real dependencies on @angular/core and @angular/common. This meant that
any changes to the compiler would result in long rebuild processes
for tests to rerun.
This change removes those dependencies and causes test code to be built
against the fake_core stub of @angular/core that the ngtsc tests use.
This change also removes the dependency on @angular/common entirely, as
locality means it's possible to reference *ngIf without needing to link
to an implementation.
PR Close#25248
Existing bootstrap code in the wild depends on the existence of
.ngfactory files, which Ivy does not need. This commit adds the
capability in ngtsc to generate .ngfactory files which bridge
existing bootstrap code with Ivy.
This is an initial step. Remaining work includes complying with
the compiler option to specify a generated file directory, as well
as presumably testing in g3.
PR Close#25176
Before this change bound properties would not be used when matching directives
at runtime.
That is `<ng-template [ngIf]=cond>...</ng-template>` would not trigger the
`ngIf` directive.
PR Close#25272
The optional property on `ts.CompilerHost` is called `realpath` (lower
case), not `realPath` (lower camel case).
It is not clear to me what the impact of this is, but the author's
intent was clearly to override `realpath`.
PR Close#25023
Update XMB placeholders(<ph>) to include the original value on top of an
example. Placeholders can by definition have one example(<ex>) tag and a
text node. The text node is used by TC as the "original" value from the
placeholder, while the example should represent a dummy value.
For example: <ph name="PET"><ex>Gopher</ex>{{ petName }}</ph>.
This change makes sure that we have the original text, but it *DOES NOT*
make sure that the example is correct. The example has the same wrong
behavior of showing the interpolation text rather than a useful
example.
No breaking changes, but tools that depend on the previous behavior and
don't consider the full XMB definition may fail to parse the XMB.
Fixes b/72565847
PR Close#25079
In some code formats (e.g. ES5) methods can actually be function
expressions. For example:
```js
function MyClass() {}
// this static method is declared as a function expression
MyClass.staticMethod = function() { ... };
```
PR Close#24897
Andrew Kushnir
Alex Rickabaugh
JoostK
Paul Gschwendtner
Pete Bacon Darwin
Igor Minar
Marc Laval
Olivier Combe
Matias Niemelä
Misko Hevery
Greg Magolan
Charles Lyding
cexbrayat
Kara Erickson
Huáng Jùnliàng
Alex Eagle
Pawel Kozlowski
Alan Agius
George Kalpakas
Ben Lesh
Ádám Lippai
Victor Berchet
Martin Probst
Carlos Ortiz Garcia