This commit adds an OpenID Connect authentication realm to
elasticsearch. Elasticsearch (with the assistance of kibana or
another web component) acts as an OpenID Connect Relying
Party and supports the Authorization Code Grant and Implicit
flows as described in http://ela.st/oidc-spec. It adds support
for consuming and verifying signed ID Tokens, both RP
initiated and 3rd party initiated Single Sign on and RP
initiated signle logout.
It also adds an OpenID Connect Provider in the idp-fixture to
be used for the associated integration tests.
This is a backport of #40674
This change adds either ToXContentObject or ToXContentFragment to classes
directly implementing ToXContent currently. This helps in reasoning about
whether those implementations output full xcontent object or just fragments.
Relates to #16347
It is possible for the watches tracked by ScheduleTriggerEngineMock to
get out of sync with the Watches in the ScheduleTriggerEngine
production code, which can lead to watches failing to run.
This commit:
1. Changes TimeWarp to try to run the watch on all schedulers, rather than stopping after one which claims to have the watch registered. This reduces the impact of desynchronization between the mocking code and the backing production code.
2. Makes ScheduleTriggerEngineMock respect pauses of execution again. This is necessary to prevent duplicate watch invocations due to the above change.
3. Tweaks how watches are registered in ScheduleTriggerEngineMock to prevent race conditions due to concurrent modification.
4. Tweaks WatcherConcreteIndexTests to use TimeWarp instead of waiting for watches to be triggered, as TimeWarp is more reliable and accomplishes the same goal.
For pattern "n:localhost" PatternRule#isLocalhost() matches
any local address, loopback address.
[Note: I think for "localhost" this should not consider IP address
as a match when they are bound to network interfaces. It should just
be loopback address check unless the intent is to match all local addresses.
This class is adopted from Netty3 and I am not sure if this is intended
behavior or maybe I am missing something]
For now I have fixed this assuming the PatternRule#isLocalhost check is
correct by avoiding use of local address to check address denied.
Closes#40194
Backport of (#41087)
* Use environment settings instead of state settings for Watcher config
Prior to this we used the settings from cluster state to see whether ILM was
enabled of disabled, however, these settings don't accurately reflect the
`xpack.ilm.enabled` setting in `elasticsearch.yml`.
This commit changes to using the `Environment` settings, which correctly reflect
the ILM enabled setting.
Resolves#41042
ILM poll intervals of less than 1 second will not be allowed, so add a
deprecation check for that.
Even though I'm pretty sure zero production clusters will do this, it's
best to be thorough.
Fixes some documentation urls in the rest-api-spec. Some of these URLs
pointed to 404s and a few others pointed to deprecated documentation
when we have better documentation now. I'm not consistent about `master`
vs `current` because we're not consistent in other places and I think we
should solve all of those at once with something a little more
automatic.
disallow partial results in rollup and data frame, after this change the client throws an error directly
replacing the previous runtime exception thrown, allowing better error handling in implementations.
This is a dependency of #39504
Motivation:
By refactoring `TransportShardBulkAction#shardOperationOnPrimary` to async, we enable using `DeterministicTaskQueue` based tests to run indexing operations. This was previously impossible since we were blocking on the `write` thread until the `update` thread finished the mapping update.
With this change, the mapping update will trigger a new task in the `write` queue instead.
This change significantly enhances the amount of coverage we get from `SnapshotResiliencyTests` (and other potential future tests) when it comes to tracking down concurrency issues with distributed state machines.
The logical change is effectively all in `TransportShardBulkAction`, the rest of the changes is then simply mechanically moving the caller code and tests to being async and passing the `ActionListener` down.
Since the move to async would've added more parameters to the `private static` steps in this logic, I decided to inline and dry up (between delete and update) the logic as much as I could instead of passing the listener + wait-consumer down through all of them.
* moved hlrc parsing tests from xpack to hlrc module and removed dependency on hlrc from xpack core
* deprecated old base test class
* added deprecated jdoc tag
* split test between xpack-core part and hlrc part
* added lang-mustache test dependency, this previously came in via
hlrc dependency.
* added hlrc dependency on a qa module
* duplicated ClusterPrivilegeName class in xpack-core, since x-pack
core no longer has a dependency on hlrc.
* replace ClusterPrivilegeName usages with string literals
* moved tests to dedicated to hlrc packages in order to remove Hlrc part from the name and make sure to use imports instead of full qualified class where possible
* remove ESTestCase. from method invocation and use method directly,
because these tests indirectly extend from ESTestCase
When monitoring exporters are all disabled, which must be done
explicitly, _and_ monitoring collection is enabled, then
any call to `_xpack/monitoring/_bulk` will create a task that
never closes _and_ ES collection will stop happening because
a semaphore is never marked as completed.
This also simplifies the async `ExportBulk` code by removing the
third step (second async step, `close`) entirely because it was
entirely unnecessary by both implementations.
* [ML] Add validation that rejects duplicate detectors in PutJobAction
Closes#39704
* Add YML integration test for duplicate detectors fix.
* Use "== false" comparison rather than "!" operator.
* Refine error message to sound more natural.
* Put job description in square brackets in the error message.
* Use the new validation in ValidateJobConfigAction.
* Exclude YML tests for new validation from permission tests.
This PR generates deprecation log entries for each Role Descriptor,
used for building a Role, when the Role Descriptor grants more privileges
for an alias compared to an index that the alias points to. This is done in
preparation for the removal of the ability to define privileges over aliases.
There is one log entry for each "role descriptor name"-"alias name" pair.
On such a notice, the administrator is expected to modify the Role Descriptor
definition so that the name pattern for index names does not cover aliases.
Caveats:
* Role Descriptors that are not used in any authorization process,
either because they are not mapped to any user or the user they are mapped to
is not used by clients, are not be checked.
* Role Descriptors are merged when building the effective Role that is used in
the authorization process. Therefore some Role Descriptors can overlap others,
so even if one matches aliases in a deprecated way, and it is reported as such,
it is not at risk from the breaking behavior in the current role mapping configuration
and index-alias configuration. It is still reported because it is a best practice to
change its definition, or remove offending aliases.
As empty string has a certain meaning, the JDBC driver returns an empty
set instead for better client compatibility.
Fix#41028
(cherry picked from commit 4cbafa585b7a514eb6c156606dd516324cd3980a)
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
The invalid license enforced is exposed to the cluster state update
thread (via the license state listener) before the constructor has
finished. This violates the JLS for safe publication of an object, and
means there is a concurrency bug lurking here. This commit addresses
this by avoiding publication of the invalid license enforcer before the
constructor has returned.
* The step is incremented by the listner in `org.elasticsearch.xpack.core.indexing.AsyncTwoPhaseIndexerTests.MockIndexer#onFinish` after isFinished is set to true, but the test only waited for `isFinished`,
fixed by calling `isFinished` last
* Also made `step` volatile since we are reading it from different thread from the one incrementing it
* Closes#40946
Properly treat '%' as a wildcard for catalog filtering instead of doing
a straight string match.
Table filtering now considers aliases as well.
Add escaping char for LIKE queries with user defined params
Fix monotony of ORDINAL_POSITION
Add integration test for SYS COLUMNS - currently running only inside
single_node since the cluster name is test dependent.
Add pattern unescaping for index names
Fix#40582
(cherry picked from commit 8e61b77d3f849661b7175544f471119042fe9551)
This opt-out query cache has an unsafe publication issue, where the
cache is exposed to another thread (namely the cluster state update
thread) before the constructor has finished execution. This exposes the
opt-out query cache to concurrency bugs. This commit addresses this by
ensuring that the opt-out query cache is not registered as a listener
for license state changes until after the constructor has returned.
Move verification of arguments for Conditional functions and IN
from `Verifier` to the `resolveType()` method of the functions.
(cherry picked from commit 241644aac57baee1eb128b993ee410c7d08172a5)
* Avoid sharing source directories as it breaks intellij
* Subprojects share main project output classes directory
* Fix jar hell
* Fix sql security with ssl integ tests
* Relax dependency ordering rule so we don't explode on cycles
Changed the JDBC metadata to return empty results sets instead of
throwing SQLFeatureNotSupported as it seems a more safer/compatible
approach for consumers.
Fix#40533
(cherry picked from commit ef2d2527c2b5140556fd477e7ff6ea36966684da)
- Remove superfluous methods that are already
defined in superclasses.
- Improve tests for null folding on conditionals
(cherry picked from commit 67f9404f5004362e569353d1e950ffe5d7a9ab6e)
This adds a new security/qa test for TLS on a basic license.
It starts a 2 node cluster with a basic license, and TLS enabled
on both HTTP and Transport, and verifies the license type, x-pack
SSL usage and SSL certificates API.
It also upgrades the cluster to a trial license and performs that
same set of checks (to ensure that clusters with basic license
and TLS enabled can be upgraded to a higher feature license)
Backport of: #40714
This change updates our version of httpclient to version 4.5.8, which
contains the fix for HTTPCLIENT-1968, which is a bug where the client
started re-writing paths that contained encoded reserved characters
with their unreserved form.
* Add Kibana application privileges for monitoring and ml reserved roles
* Adding test for kibana-.kibana application explicitly
* Whoa there, fat fingered kibana and application...
* And I copied something from monitoring I shouldn't have...
* And actually doing what Yogesh recommended...
The security index had a few "object" types with
"dynamic": true
However, this automatically creates a mapping for each field that is
created within those objects. This means that types are dynamically
inferred and "locked in" for future updates.
Instead we want "dynamic": false which will allow us to store a range
of fields in these nested objects and retrieve them from the source,
without creating mapping types for those fields.
Backport of: #40499
Many gradle projects specifically use the -try exclude flag, because
there are many cases where auto-closeable resource ignore is never
referenced in body of corresponding try statement. Suppressing this
warning specifically in each case that it happens using
`@SuppressWarnings("try")` would be very verbose.
This change removes `-try` from any gradle project and adds it to the
build plugin. Also this change removes exclude flags from gradle projects
that is already specified in build plugin (for example -deprecation).
Relates to #40366
When translating the original aggregation for the rollup indices,
the timezone of the date histogram is validated against the rollup
job but the value is not copied in the newly created date_histogram.
Prior to this PR, there is a bug in ILM which does not allow ILM to stop
if one or more indices have an index.lifecycle.name which refers to
a policy that does not exist - the operation_mode will be stuck as
STOPPING until either the policy is created or the nonexistent
policy is removed from those indices.
This change allows ILM to stop in this case and makes the logging more
clear as to why ILM is not stopping.
By default, in integ tests we wait for the standalone cluster to start
by using the ant Get task to retrieve the cluster health endpoint.
However the ant task has no facilities for customising the trusted
CAs for a https resource, so if the integ test cluster has TLS enabled
on the http interface (using a custom CA) we need a separate utility
for that purpose.
Backport of: #40573
This change adds information about which UI path
(if any) created ML anomaly detector jobs to the
stats returned by the _xpack/usage endpoint.
Counts for the following possibilities are expected:
* ml_module_apache_access
* ml_module_apm_transaction
* ml_module_auditbeat_process_docker
* ml_module_auditbeat_process_hosts
* ml_module_nginx_access
* ml_module_sample
* multi_metric_wizard
* population_wizard
* single_metric_wizard
* unknown
The "unknown" count is for jobs that do not have a
created_by setting in their custom_settings.
Closes#38403
After `TIME` SQL data type is introduced, implement
`CURRENT_TIME/CURTIME` functions similarly to CURRENT_TIMESTAMP
that return the system's current time (only, without the date part).
Closes: #40468
(cherry picked from commit 9feede781409d0e264ce45951a25b28ff129b187)
It is possible to have SSL enabled but security disabled if security
was dynamically disabled by the license type (e.g. trial license).
e.g. In the following configuration:
xpack.license.self_generated.type: trial
# xpack.security not set, default to disabled on trial
xpack.security.transport.ssl.enabled: true
The security feature will be reported as
available: true
enabled: false
And in this case, SSL will be active even though security is not
enabled.
This commit causes the X-Pack feature usage to report the state of the
"ssl" features unless security was explicitly disabled in the
settings.
Backport of: #40672
TimeProcessor didn't implement `getWriteableName()` so the one from
the parent was used which returned the `NAME` of the parent. This
caused `TimeProcessor` objects to be deserialised into
DateTimeProcessor.
Moreover, added a restriction to run the TIME related integration tests
only in UTC timezone.
Fixes: #40717
(cherry picked from commit cfea348bec20e547df72c415cccd85279accb767)
A full format for a DATETIME would be:
`2019-03-30T10:20:30.123+10:00` which is 29 chars long.
For DATE a full format would be: `2019-03-30T00:00:00.000+10:00`
which is also 29 chars long.
(cherry picked from commit 6be83964ed025528778bca8d35692762e166983b)
It is important that resync actions are not rejected on the primary even if its
`write` threadpool is overloaded. Today we do this by exposing
`registerRequestHandlers` to subclasses and overriding it in
`TransportResyncReplicationAction`. This isn't ideal because it obscures the
difference between this action and other replication actions, and also might
allow subclasses to try and use some state before they are properly
initialised. This change replaces this override with a constructor parameter to
solve these issues.
Relates #40706
* [ML] Add mappings, serialization, and hooks to persist stats
* Adding tests for transforms without tasks having stats persisted
* intermittent commit
* Adjusting usage stats to account for stored stats docs
* Adding tests for id expander
* Addressing PR comments
* removing unused import
* adding shard failures to the task response
We enforced the timezone of range queries when using the rollup
search endpoint, but this validation is not needed. Since
rollup dates are stored in UTC, and range queries are always
converted to UTC (even if specifying a `time_zone`) the validation
is not needed and can prevent legitimate queries from running.
Previously we only set the latch countdown with `nextStep.setLatch` after the
cluster state change has already been counted down. However, it's possible
execution could have already started, causing the latch to be missed when the
`MockAsyncActionStep` is being executed.
This moves the latch setting to be before the call to
`runPolicyAfterStateChange`, which means it is always available when the
`MockAsyncActionStep` is executed.
I was able to reproduce the failure every 30-40 runs before this change. With
this change, running 2000+ times the test passes.
Resolves#40018
* [ML] Addressing bug streaming DatafeedConfig aggs from (<= 6.5.4) -> 6.7.0 (#40610)
* Addressing stream failure and adding tests to catch such in the future
* Add aggs to full cluster restart tests
* Test BWC for datafeeds with and without aggs
The wire serialisation is different for null/non-null
aggs, so it's worth testing both cases.
* Fixing bwc test, removing types
* Fixing BWC test for datafeed
* Update 40_ml_datafeed_crud.yml
* Update build.gradle
This adds a new `role_templates` field to role mappings that is an
alternative to the existing roles field.
These templates are evaluated at runtime to determine which roles should be
granted to a user.
For example, it is possible to specify:
"role_templates": [
{ "template":{ "source": "_user_{{username}}" } }
]
which would mean that every user is assigned to their own role based on
their username.
You may not specify both roles and role_templates in the same role
mapping.
This commit adds support for templates to the role mapping API, the role
mapping engine, the Java high level rest client, and Elasticsearch
documentation.
Due to the lack of caching in our role mapping store, it is currently
inefficient to use a large number of templated role mappings. This will be
addressed in a future change.
Backport of: #39984, #40504
This commit introduces 2 changes to application privileges:
- The validation rules now accept a wildcard in the "suffix" of an application name.
Wildcards were always accepted in the application name, but the "valid filename" check
for the suffix incorrectly prevented the use of wildcards there.
- A role may now be defined against a wildcard application (e.g. kibana-*) and this will
be correctly treated as granting the named privileges against all named applications.
This does not allow wildcard application names in the body of a "has-privileges" check, but the
"has-privileges" check can test concrete application names against roles with wildcards.
Backport of: #40398
Support ANSI SQL's TIME type by introductin a runtime-only
ES SQL time type.
Closes: #38174
(cherry picked from commit 046ccd4cf0a251b2a3ddff6b072ab539a6711900)
This change removes the variants of the rolling upgrade and full
cluster restart tests that use or do not use a system key. These tests
were added during 5.x when the system key was still used for security
and now the system key is only used as the watcher encryption key so
duplicating rolling upgrade and full cluster restarts is not needed.
The change here removes the subprojects for testing these scenarios and
defaults to always run with the watcher sensitive values encrypted for
these tests.
* Have LIKE and RLIKE only use term-level queries (wildcard and regexp respectively). They
are already working only with exact fields, thus be in-line with how
SQL works in general (what you index is what you search on).
(cherry picked from commit 1bba887d481b49db231a1442922f1813952dcc67)
Enable some Ignored integration tests for issues/features that
have already been resolved/implemented.
(cherry picked from commit c23580f477ffc61c5701e14a91006db7bf21a8d4)
Previously, an expression like `10 + 2::long` would be interpreted
as `CAST(10 + 2 AS LONG)` instead of `10 + CAST(2 AS LONG)`.
(cherry picked from commit e34cc2f38b1477e78788ee377938f42cc47187c7)
In some cases the retention leases can return null, causing a
`NullPointerException` when waiting for no followers.
This wraps those so that no NPE is thrown.
Here is an example failure:
```
[2019-03-26T09:24:01,368][ERROR][o.e.x.i.IndexLifecycleRunner] [node-0] policy [deletePolicy] for index [ilm-00001] failed on step [{"phase":"delete","action":"delete","name":"wait-for-shard-history-leases"}]. Moving to ERROR step
java.lang.NullPointerException: null
at org.elasticsearch.xpack.core.indexlifecycle.WaitForNoFollowersStep.lambda$evaluateCondition$0(WaitForNoFollowersStep.java:60) ~[?:?]
at java.util.stream.ReferencePipeline$7$1.accept(ReferencePipeline.java:267) ~[?:1.8.0_191]
at java.util.stream.ReferencePipeline$3$1.accept(ReferencePipeline.java:193) ~[?:1.8.0_191]
at java.util.Spliterators$ArraySpliterator.tryAdvance(Spliterators.java:958) ~[?:1.8.0_191]
at java.util.stream.ReferencePipeline.forEachWithCancel(ReferencePipeline.java:126) ~[?:1.8.0_191]
at java.util.stream.AbstractPipeline.copyIntoWithCancel(AbstractPipeline.java:498) ~[?:1.8.0_191]
at java.util.stream.AbstractPipeline.copyInto(AbstractPipeline.java:485) ~[?:1.8.0_191]
at java.util.stream.AbstractPipeline.wrapAndCopyInto(AbstractPipeline.java:471) ~[?:1.8.0_191]
at java.util.stream.MatchOps$MatchOp.evaluateSequential(MatchOps.java:230) ~[?:1.8.0_191]
at java.util.stream.MatchOps$MatchOp.evaluateSequential(MatchOps.java:196) ~[?:1.8.0_191]
at java.util.stream.AbstractPipeline.evaluate(AbstractPipeline.java:234) ~[?:1.8.0_191]
at java.util.stream.ReferencePipeline.anyMatch(ReferencePipeline.java:449) ~[?:1.8.0_191]
at org.elasticsearch.xpack.core.indexlifecycle.WaitForNoFollowersStep.lambda$evaluateCondition$2(WaitForNoFollowersStep.java:61) ~[?:?]
at org.elasticsearch.action.ActionListener$1.onResponse(ActionListener.java:62) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
at org.elasticsearch.action.support.ContextPreservingActionListener.onResponse(ContextPreservingActionListener.java:43) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
at org.elasticsearch.action.support.TransportAction$1.onResponse(TransportAction.java:68) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
at org.elasticsearch.action.support.TransportAction$1.onResponse(TransportAction.java:64) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
at org.elasticsearch.action.support.ContextPreservingActionListener.onResponse(ContextPreservingActionListener.java:43) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction.onCompletion(TransportBroadcastByNodeAction.java:383) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction.onNodeResponse(TransportBroadcastByNodeAction.java:352) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction$1.handleResponse(TransportBroadcastByNodeAction.java:324) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction$1.handleResponse(TransportBroadcastByNodeAction.java:314) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
at org.elasticsearch.transport.TransportService$ContextRestoreResponseHandler.handleResponse(TransportService.java:1095) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
at org.elasticsearch.transport.TransportService$DirectResponseChannel.processResponse(TransportService.java:1176) ~[elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
...
```
Replaces the vagrant based kerberos fixtures with docker based test fixtures plugin.
The configuration is now entirely static on the docker side and no longer driven by Gradle,
also two different services are being configured since there are two different consumers of the fixture that can run in parallel and require different configurations.
SYS TABLES meta command has been improved to better adhere to the ODBC
spec in particular with regards to the handling of enumerations (and
the differences between '%', null and ''(empty string))
Fix#40348
(cherry picked from commit e3070615000228c283d17ce8d182b44f1450a5d5)
Replicated closed indices can't be indexed into or searched, and therefore don't need a shard with
full indexing and search capabilities allocated. We can save on a lot of heap memory for those
indices by not allocating a mapper service and caching infrastructure (which preallocates a constant
amount per instance). Before this change, a 1GB ES instance could host 250 replicated closed
metricbeat indices (each index with one shard). After this change, the same instance can host 7300
replicated closed metricbeat instances (not that this would be a recommended configuration). Most
of the remaining memory is in the cluster state and the IndexSettings object.
Previously, `getTime(colIdx/colLabel)` and
`getObject(colIdx/colLabel, java.sql.Time.class)` methods were computing
the time from a `ZonedDateTime` by applying day in millis modulo on the epoch millis
of the `ZonedDateTime` object. This is wrong as we need to keep the time
related fields at the timezone of the `ZonedDateTime` object and just
set the date info to the epoch date (01/01/1970).
Additionally fixes a testing issue as the original timezone id is converted
to an offset string when parsing the response from the server.
* Document MATCH and QUERY function predicates.
* Polish the functions pages and add a list of functions to the main Functions & Operators page.
(cherry picked from commit 4cec0ae1b962ec7ea011a290aec72740386eb808)
Currently the TransportMessageListener is applied and used in the
Transport class. However, local requests and responses never make it to
this class. This PR moves the listener add/remove methods to the
TransportService. After this change the Transport can only have one
listener set with it. This one listener is the TransportService, which
will then propogate the events to the external listeners.
Additionally this commit back ports #40237
Remove Tracer from MockTransportService
Currently the TransportMessageListener is applied and used in the
Transport class. However, local requests and responses never make it to
this class. This PR moves the listener add/remove methods to the
TransportService. After this change the Transport can only have one
listener set with it. This one listener is the TransportService, which
will then propogate the events to the external listeners.
* [ML] Add data frame task state object and field
* A new state item is added so that the overall task state can be
accoutned for
* A new FAILED state and reason have been added as well so that failures
can be shown to the user for optional correction
* Addressing PR comments
* adjusting after master merge
* addressing pr comment
* Adjusting auditor usage with failure state
* Refactor, renamed state items to task_state and indexer_state
* Adding todo and removing redundant auditor call
* Address HLRC changes and PR comment
* adjusting hlrc IT test
create and use unique, deterministic document ids based on the grouping values.
This is a pre-requisite for updating documents as well as preventing duplicates after a hard failure during indexing.
This change removes the use of hardcoded port values for the
idp-fixture in favor of the mapped ephemeral ports. This should prevent
failures due to port conflicts in CI.
Ensure that there is at least a 1s delay between the time that state
is persisted by each of the two jobs in the test.
Model snapshot IDs use the current time in epoch seconds to
distinguish themselves, hence snapshots will be overwritten
by another if it occurs in the same 1s window.
Closes#40347
To avoid having to specify each spec by hand (which can miss specs to be
added), the test infrastructure now performs classpath discovery so that
each spec added, is automatically considered.
Relates #40358
(cherry picked from commit d0f60b4425c731509aa8ca765d55f563f866ef90)
* [ML] make source and dest objects in the transform config
* addressing PR comments
* Fixing compilation post merge
* adding comment for Arrays.hashCode
* addressing changes for moving dest to object
* fixing data_frame yml tests
* fixing API test
Right now, the stats API only provides refresh metrics regarding
internal refreshes. This isn't very useful and somewhat misleading for
cluster administrators since the internal refreshes are not indicative
of documents being available for search.
In this PR I added a new metric for collecting external refreshes as
they occur and exposing them through the stats API. Now, calling an
endpoint for stats will yield external refresh metrics as well.
Relates #36712
Previously, `getDate(int columnIdx)/getDate(String columnLabel)` and
were using legacy`java.util.Calendar` instead of the the `java.time.*`
classes to reset to the start of day. This resulted in different results
for certain timestamps and timezones when calling
`getDate(col)` vs`getObject(col, java.sql.Date)`
Now only the methods (that must be implemented due to the JDBC spec)
`getDate(int columnIdx, Calendar cal)/getDate(String columnLabel, Calendar cal)`
are still using the `java.util.Calendar` for those conversion.
The same change was applied to
`getTime(int columnIdx)/getTime(String columnLabel)`
and
`getTimestamp(int columnIdx)/getTimestamp(String columnLabel)`
Fixes: #40289
(cherry picked from commit 44560671f18397e0c58e3647732880fcb73a5034)
In some cases, a request to perform a retention lease action can arrive
on a primary shard before it is active. In this case, the primary shard
would not yet be in primary mode, tripping an assertion in the
replication tracker. Instead, we should not attempt to perform such
actions on an initializing shard. This commit addresses this by not
returning the primary shard in the single shard iterator if the primary
shard is not yet active.
Previously metric aggregations on date fields would return a double
which caused errors when trying to apply scalar functions on top, e.g.:
```
SELECT YEAR(MAX(date)) FROM test
```
Fixes: #40376
(cherry-picked from commit 41d0a038467fbdbbf67fd9bfdf27623451cae63a)
* Refactor RegexMatch to support both LIKE and RLIKE
* Add integration tests for RLIKE
* Polish the rest of tests
(cherry picked from commit 7562d6eeeb77c04794002649fe726f4b3a9a398b)
Upgrade JLine to 3.10.0
Switch to using JLine granular jars instead of the uber-one
Remove Jansi dependency (due to errors in closing streams)
Pin JNA dependency to our own artifact
Fix#40239
(cherry picked from commit 9afa65fa80111f3b68c13373c7b6db13c11dde31)
Extend CAST to support all data types notations (whether SQL or ES
specific)
Fix#40282
(cherry picked from commit eb2ee8a344da946920598839a5db76c8bb9bc3fe)
Add a checkpoint service for data frame transforms, which allows to ask for a checkpoint of the
source. In future these checkpoints will be stored in the internal index to
- detect upstream changes
- updating the data frame without a full re-run
- allow data frame clients to checkpoint themselves
* Rewrite Round and Truncate functions to have a slightly different
approach to handling the optional parameter in the constructor. Until now
the optional parameter was considered 0 if the value was missing and the
constructor was filling in this value. The current solution is to have
the optional parameter as null right until the actual calculation is done.
(cherry picked from commit 3e314f8fa4cb322e67949e80857561ce51268726)
If there's a failover on the follower, then its max_seq_no_of_updates is
bootstrapped from its max_seq_no which might be higher than the
max_seq_no_of_updates of the leader. We need to relax this check.
Relates #40249
This refactoring is in the context of the work related to moving security
tokens to a new index. In that regard, the Token Service has to work with
token documents stored in any of the two indices, albeit only as a transient
situation. I reckoned the added complexity as unmanageable,
hence this refactoring.
This is incomplete, as it fails to address the goal of minimizing .security accesses,
but I have stopped because otherwise it would've become a full blown rewrite
(if not already). I will follow-up with more targeted PRs.
In addition to being a true refactoring, some 400 errors moved to 500. Furthermore,
more stringed validation of various return result, has been implemented, notably the
one of the token document creation.
This commit adjusts the frequency with which CCR renews retention leases
and with which primaries sync retention leases to replicas. This helps
Lucene reclaim soft-deleted documents more aggressively, which we have
found in some use-cases can help improve performance, and either way
will help keep disk space under more control.
* Define a equals method for Like function so that the pattern used
is considered in the equality check. Whenever the functions are resolved
this check should be used.
(cherry picked from commit 4e5d5af58a140573b8ee19d57c7839db7b779e3b)
When creating API keys we check for if API key with
the same key name already exists and fail the request if it does.
The check should have been performed with XPackSecurityUser
instead of the authenticated user. This caused the request to fail
in case of the non-super user trying to create an API key.
This commit fixes by executing search action with SECURITY_ORIGIN
so it can be executed with XPackSecurityUser.
Also fixed the Rest test to avoid using a user with `super_user` role.
Closes#40029
Previously, calling getDate()/getTime()/getTimestamp() and getObject()
with the corresponding java.sql class on a column of SQL DATE type from
the JDBC result set would throw an Exception.
* [Data Frame] Refactor GET Transforms API:
* Add pagination
* comma delimited list expression support GET transforms
* Flag troublesome internal code for future refactor
* Removing `allow_no_transforms` param, ratcheting down pageparam option
* Changing DataFrameFeatureSet#usage to not get all configs
* Intermediate commit
* Writing test for batch data gatherer
* Removing unused import
* removing bad println used for debugging
* Updating BatchedDataIterator comments and query
* addressing pr comments
* disallow null scrollId to cause stackoverflow
Previously, when a trival plain `SELECT` or a trivial `SELECT` with
aggregations has also an `ORDER BY` or a `LIMIT` or both, then the
optimization to convert it to a `LocalRelation` was skipped resulting
in exception thrown. E.g.::
```
SELECT 'foo' FROM test LIMIT 10
```
or
```
SELECT 'foo' FROM test GROUP BY 1 ORDER BY 1
```
Fixes: #40211
When selecting columns of ES type `date` (SQL's DATETIME) the
`FieldHitExtractor` was not using the timezone of the client session
but always resorted to UTC. The same behaviour (UTC only) was
encountered also for grouping keys (`CompositeKeyExtractor`) and
for First/Last functions on dates (`TopHitsAggExtractor`).
Fixes: #40152
Currently, we cannot update index setting index.translog.sync_interval if index is open, because it's
not dynamic which can be updated for closed index only.
Closes#32763
If a replica were first reset due to one primary failover and then
promoted (before resync completes), its MSU would not include changes
since global checkpoint, leading to errors during translog replay.
Fixed by re-initializing MSU before restoring local history.
Some field types are not used for queries which use auto-expansion, in
particular, `binary`, `geo_point`, and `geo_shape`. This was causing the
count returned by the deprecation check and the count returned by the
query-time deprecation warning to be misaligned for indices with fields
of those types, with the count returned by the deprecation check being
larger.
The setup-passwords tool gives cryptic messages in case where custom discovery providers are
used (see #33580). As the URL auto-detection logic should be seen as best effort, this commit
improves the exception message to make it clearer what needs to be done to fix the issue.
Relates #33580
This named writable was never registered, so it means that we could not
read auto-follow patterns that were registered in the cluster
state. This causes them to be lost on restarts, a bad bug. This commit
addresses this by registering this named writable, and we add a basic
CCR restart test to ensure that CCR keeps functioning properly when the
follower is restarted.
The Migration Assistance API has been functionally replaced by the
Deprecation Info API, and the Migration Upgrade API is not used for the
transition from ES 6.x to 7.x, and does not need to be kept around to
repair indices that were not properly upgraded before upgrading the
cluster, as was the case in 6.
We introduced WAIT_CLUSTERSTATE action in #19287 (5.0), but then stopped
using it since #25692 (6.0). This change removes that action and related
code in 7.x and 8.0.
Relates #19287
Relates #25692
We were leaking a reference to an AutoFollowCoordinator during
construction, violating safe publication according to the JLS
specification. This commit addresses this by waiting to register
AutoFollowCoordinator with the ClusterApplierService after the
AutoFollowCoordinator is fully constructed. We also remove ourselves as
a listener when stopping.
* Take into consideration aliases that can be used as aggregates
and in the ORDER BY element so that the groupings are re-ordered inside
the composite aggregation according to the ORDER BY ordering.
(cherry picked from commit 110c0b90b9cf2e9344ab3f412cfa8f8cd94ad71f)
For cases where fields can have multi values, allow the behavior to be
customized through a dedicated configuration field.
By default this will be enabled on the drivers so that existing datasets
work instead of throwing an exception.
For regular SQL usage, the behavior is false so that the user is aware
of the underlying data.
Fix#39700
(cherry picked from commit 2b351571961f172fd59290ee079126bbd081ceaf)
When shutting down a node, auto-followers will keep trying to run. This
is happening even as transport services and other components are being
closed. In some cases, this can lead to a stack overflow as we rapidly
try to check the license state of the remote cluster, can not because
the transport service is shutdown, and then immeidately retry
again. This can happen faster than the shutdown, and we die with stack
overflow. This commit adds a stop command to auto-followers so that this
retry loop occurs at most once on shutdown.
This commit enables full-cluster-restart and rolling-upgrade tests
to run with nodes using a JVM in fips approved only node by using
PEM key material instead of a JKS for the transport layer in that
case.
With SUN security provider, a CertificateException is thrown when
attempting to parse a Certificate from a PEM file on disk with
`sun.security.provider.X509Provider#parseX509orPKCS7Cert`
When using the BouncyCastle Security provider (as we do in fips
tests) the parsing happens in
CertificateFactory#engineGenerateCertificates which doesn't throw
an exception but returns an empty list.
In order to have a consistent behavior, this change makes it so
that we throw a CertificateException when attempting to read
a PEM file from disk and failing to do so in either Security
Provider
Resolves: #39580
`SecurityIndexManager` is hardcoded to handle only the `.security`-`.security-7` alias-index pair.
This commit removes the hardcoded bits, so that the `SecurityIndexManager` can be reused
for other indices, such as the planned security tokens index (`.security-tokens-7`).
This change adjusts the LDAP connection timeout for retrieving
attributes while performing the SAML IT to 5 seconds, from 5 ms
that it previously was.
Resolves: #40025
When an auto-follower coordinator times out waiting for the remote
cluster state, we do not log any indication of this. While this is
expected behavior in quiet deployments, it is still useful to see this
information for tracing the behavior of the auto-follow
coordinator. This commit adds a trace log message indicating that the
timeout.
This commit removes the cluster state size field from the cluster state
response, and drops the backwards compatibility layer added in 6.7.0 to
continue to support this field. As calculation of this field was
expensive and had dubious value, we have elected to remove this field.
Since other classes besides intervals can be serialized as part of
the Cursor, the getNamedWritables method should be moved from Intervals
to a more generic class Literals.
Relates to #39973
If multiple jobs are created together and the anomaly
results index does not exist then some of the jobs could
fail to update the mappings of the results index. This
lead them to fail to write their results correctly later.
Although this scenario sounds rare, it is exactly what
happens if the user creates their first jobs using the
Nginx module in the ML UI.
This change fixes the problem by updating the mappings
of the results index if it is found to exist during a
creation attempt.
Fixes#38785
org.elasticsearch.xpack.monitoring.action.MonitoringBulkRequestTests#testAddRequestContent
can still randomly use a defaultType for monitoring. The defaultType
support has been removed as of PR #39888. Prior to its's removal it
would default the type if one is not specified. The _type on the monitoring
bulk end point is currently required, though it is not used as the final index type
(which defaultType would have).
Closes#39980
Previously, JDBC's REST call to the server was always sending UTC
instead of the timezone passed through connection string/properties.
Moreover the conversion to java.sql.Date was problematic as a
calculation on the epoch millis was used to set the time to 00:00:00.000
and the timezone info was lost. This caused the resulting java.sql.Date
object which is always using the JVM's timezone (no matter what timezone
setting is used in the connection string/properties) to be wrongly created.
Fixes: #39915
* [ML] Refactor common utils out of ML plugin to XPack.Core
* implementing GET filters with abstract transport
* removing added rest param
* adjusting how defaults can be supplied
* [Data Frame] Refactor PUT transform such that:
* POST _start creates the task and starts it
* GET transforms queries docs instead of tasks
* POST _stop verifies the stored config exists before trying to stop
the task
* Addressing PR comments
* Refactoring DataFrameFeatureSet#usage, decreasing size returned getTransformConfigurations
* fixing failing usage test
The problem here was that `DatafeedJob` was updating the last end time searched
based on the `now` even though when there are aggregations, the extactor will
only search up to the floor of `now` against the histogram interval.
This commit fixes the issue by using the end time as calculated by the extractor.
It also adds an integration test that uses aggregations. This test would fail
before this fix. Unfortunately the test is slow as we need to wait for the
datafeed to work in real time.
Closes#39842
The change replaces the Vagrant box based fixture with a fixture
based on docker compose and 2 docker images, one for an openldap
server and one for a Shibboleth SAML Identity Provider.
The configuration of both openldap and shibboleth is identical to
the previous one, in order to minimize required changes in the
tests
When following the steps mentioned in upgrade guide
https://www.elastic.co/guide/en/elastic-stack/6.6/upgrading-elastic-stack.html
if we disable the cluster shard allocation but fail to enable it after
upgrading the nodes and plugins, the next step of upgrading internal
indices fails. As we did not check the bulk request response for reindexing,
we delete the old index assuming it has been created. This is fatal
as we cannot recover from this state.
This commit adds a pre-upgrade check to test the cluster shard
allocation setting and fail upgrade if it is disabled. In case there
are search or bulk failures then we remove the read-only block and
fail the upgrade index request.
Closes#39339
The LDAP tests attempt to bind all interfaces,
but if for some reason an interface can't be bound
the tests will stall until the suite times out.
This modifies the tests to be a bit more lenient and allow
some binding to fail so long as at least one succeeds.
This allows the test to continue even in more antagonistic
environments.
Indices with very large numbers of fields (>1024 by default) that do not
have index.query.default_field set will experience query failures in 7.0
for Simple Query String and Multi-Match queries. This deprecation check
issues a warning for indices of that size that do not have
index.query.default_field set.
This also adds a deprecation check for index templates with field counts
that would trigger these query failures as well.
When a query is translated into script terms agg where key has a date
type, it should generate a terms agg with value_type long instead of
date, otherwise the key gets formatted as a string, which confuses
hit extractor.
Fixes#37042
This commit removes the "doc" type from monitoring internal indexes.
The template still carries the "_doc" type since that is needed for
the internal representation.
This change impacts the following templates:
monitoring-alerts.json
monitoring-beats.json
monitoring-es.json
monitoring-kibana.json
monitoring-logstash.json
As part of the required changes, the system_api_version has been
bumped from "6" to "7" and support for version "2" has been dropped.
A new empty pipeline is now introduced for the version "7", and
the formerly empty "6" pipeline will now remove the type and re-direct
the request to the "7" index.
Additionally, to due to a difference in the internal representation
(which requires the inclusion of "_doc" type) and external representation
(which requires the exclusion of any type) a helper method is introduced
to help convert internal to external representation, and used by the
monitoring HTTP template exporter.
Relates #38637
Painless allows ZonedDateTime objects to be passed natively to scripts
which creates problematic translate queries as the ZonedDateTime is
passed as a string instead.
Wrap this with a dedicated method to perform the conversion.
Fix#39877
(cherry picked from commit 4957cad5bda77257d10430ac102e93f5e062148a)
Enhance ConstantProcessor to properly serialize complex objects
(Intervals) that have their own custom serialization/deserialization
mechanism
Fix#39875
(cherry picked from commit ed8a1f9340673e69a44ea7a89679cadb4762e43d)
* reduce the number of leader indices to be auto followed
* also check the number of follower indices being created
* also check the whether leader indices are marked as auto followed
Relates to #36761
The monitoring bulk API accepts the same format as the bulk API, yet its concept
of types is different from "mapping types" and the deprecation warning is only
emitted as a side-effect of this API reusing the parsing logic of bulk requests.
This commit extracts the parsing logic from `_bulk` into its own class with a
new flag that allows to configure whether usage of `_type` should emit a warning
or not. Support for payloads has been removed for simplicity since they were
unused.
@jakelandis has a separate change that removes this notion of type from the
monitoring bulk API that we are considering bringing to 8.0.
* [ML] refactoring lazy query and agg parsing
* Clean up and addressing PR comments
* removing unnecessary try/catch block
* removing bad call to logger
* removing unused import
* fixing bwc test failure due to serialization and config migrator test
* fixing style issues
* Adjusting DafafeedUpdate class serialization
* Adding todo for refactor in v8
* Making query non-optional so it does not write a boolean byte
The watcher stats implementation tries to look at all queued watches
before preparing the result. We want to cast these to a
WatchExecutionTask to extract the context to prepare the stats for
queued watches. The problem is that not all tasks on the watcher queue
were WatchExecutionTask. This is because a manually executed watch was
not even at all wrapped in a WatchExecutionTask. Moreover, we were using
ExecutorService#submit(Runnable) which would wrap the Runnable in a
FutureTask<?>. This commit addresses this by using a WatchExecutionTask,
and also using ExecutorService#execute(Runnable) so that no wrapping
occurs. This will let us continue with the assumption that all queued
tasks are WatchExecutionTasks.
* Bundle java in distributions
Setting up a jdk is currently a required external step when installing
elasticsearch. This is particularly problematic for the rpm/deb packages
as installing a jdk in the same package installation command does not
guarantee any order, so must be done in separate steps. Additionally,
JAVA_HOME must be set and often causes problems in selecting a correct
jdk when, for example, the system java is an older unsupported version.
This commit bundles platform specific openjdks into each distribution.
In addition to eliminating the issues above, it also presents future
possible improvements like using jlink to build jdk images only
containing modules that elasticsearch uses.
closes#31845
This commit removes the "doc" type from watcher internal indexes.
The template still carries the "_doc" type since that is needed for
the internal representation.
This impacts the .watches, .triggered-watches, and .watch-history indexes.
External consumers do not need any changes since all external calls
go through the _watcher API, and should not interact with the the .index directly.
Relates #38637
This test was more complicated than necessary, where we were capturing
requests to prevent removal of retention leases, so that our forget
follower request could remove the retention leases instead. Instead, a
pause is enough to ensure that the retention leases are not re-added
after we remove them by the forget follower request. This commit
simplifies this test, and should remove some spurious failures.
Relates #39850
This commit changes the type from "doc" to "_doc" for the
.logstash-management template. Since this is an internally
managed template it does not always go through the REST
layer for it's internal representation. The internal
representation requires the default "_doc" type, which for
external templates is added in the REST layer.
Related #38637
When trace logging is enabled we log the computed steps for a policy. This
commit makes sure that the steps that are logged are in the same order they will
be run when the policy executes. This makes it much easier to reason about the
policy if the move-to-step API is ever required in the future.
A TLS handshake requires exchanging multiple messages to initiate a
session. If one side decides to close during the handshake, it is
supposed to send a close_notify alert (similar to closing during
application data exchange). The java SSLEngine engine throws an
exception when this happens. We currently log this at the warn level if
trace logging is not enabled. This level is too high for a valid
scenario. Additionally it happens all the time in tests (quickly closing
and opened transports). This commit changes this to be logged at the
debug level if trace is not enabled. Additionally, it extracts the
transport security exception handling to a common class.
This commit introduces the forget follower API. This API is needed in cases that
unfollowing a following index fails to remove the shard history retention leases
on the leader index. This can happen explicitly through user action, or
implicitly through an index managed by ILM. When this occurs, history will be
retained longer than necessary. While the retention lease will eventually
expire, it can be expensive to allow history to persist for that long, and also
prevent ILM from performing actions like shrink on the leader index. As such, we
introduce an API to allow for manual removal of the shard history retention
leases in this case.
Previously all the threads were writing the received tokens to a
HashSet. In cases with many threads, sometimes (1 every ~25 tests)
calling size() on the HashSet returned 2 even though it seemed to
contain only one String and there was no evidence from logging that
threadSecurityClient.refreshToken() ever returned a different
access or refresh token.
This commit changes the test to use a ConcurrentHashMap instead,
checking that we only received one pair of access token/refresh token
eventually. It also adds a check so that we won't take into consideration
tokens that are returned after 30s, hence not in the concurrent refresh
time window.
Due to migration from joda to java.time licence expiration 'full date' format
has to use 4-char pattern (MMMM). Also since jdk9 the date with ROOT
locale will still return abbreviated days and month names.
closes#39136
backport #39681
Fixes several errors of the token retry logic:
* not checking for backoff.hasNext() before calling backoff.next()
* checking for backoff.hasNext() without calling backoff.next()
* not preserving the context on the retry
* calling scheduleWithFixedDelay instead of schedule
This change does the following:
1. Makes the per-node setting xpack.ml.max_open_jobs
into a cluster-wide dynamic setting
2. Changes the job node selection to continue to use the
per-node attributes storing the maximum number of open
jobs if any node in the cluster is older than 7.1, and
use the dynamic cluster-wide setting if all nodes are on
7.1 or later
3. Changes the docs to reflect this
4. Changes the thread pools for native process communication
from fixed size to scaling, to support the dynamic nature
of xpack.ml.max_open_jobs
5. Renames the autodetect thread pool to the job comms
thread pool to make clear that it will be used for other
types of ML jobs (data frame analytics in particular)
Backport of #39320
Today the `GroupedActionListener` accepts a `defaults` parameter but all
callers pass an empty list. Also it is permitted to pass an empty group but
this is trappy because the delegated listener is never be called in that case.
This commit removes the `defaults` parameter and forbids an empty group.
As we are moving to single type indices,
we need to address this change in security-related indexes.
To address this, we are
- updating index templates to use preferred type name `_doc`
- updating the API calls to use preferred type name `_doc`
Upgrade impact:-
In case of an upgrade from 6.x, the security index has type
`doc` and this will keep working as there is a single type and `_doc`
works as an alias to an existing type. The change is handled in the
`SecurityIndexManager` when we load mappings and settings from
the template. Previously, we used to do a `PutIndexTemplateRequest`
with the mapping source JSON with the type name. This has been
modified to remove the type name from the source.
So in the case of an upgrade, the `doc` type is updated
whereas for fresh installs `_doc` is updated. This happens as
backend handles `_doc` as an alias to the existing type name.
An optional step is to `reindex` security index and update the
type to `_doc`.
Since we do not support the security audit log index,
that template has been deleted.
Relates: #38637
This commit renames the retention lease setting
index.soft_deletes.retention.lease so that it is under the namespace
index.soft_deletes.retention_lease. As such, we rename the setting to
index.soft_deletes.retention_lease.period.
Previously, Watcher only attached its listener to indices that started
with the prefix `.watches`, which causes Watcher to silently fail to
schedule newly created Watches if the `.watches` alias is redirected to
an index that does not start with `.watches`.
Watcher now attaches the listener to all indices, so that Watcher can
respond to changes in which index has the `.watches` alias.
Also adjusts the tests to randomly use non-prefixed concrete indices
for .watches and .triggered_watches.
This change adds two new cluster privileges:
* manage_data_frame_transforms
* monitor_data_frame_transforms
And two new built-in roles:
* data_frame_transforms_admin
* data_frame_transforms_user
These permit access to the data frame transform endpoints.
(Index privileges are also required on the source and
destination indices for each data frame transform, but
since these indices are configurable they it is not
appropriate to grant them via built-in roles.)
Today we have no chance to fetch actual segment stats for segments that
are currently unloaded. This is relevant in the case of frozen indices.
This allows to monitor how much memory a frozen index would use if it was
unfrozen.
This is a backport of #39631
Co-authored-by: Jay Modi jaymode@users.noreply.github.com
This change adds support for the concurrent refresh of access
tokens as described in #36872
In short it allows subsequent client requests to refresh the same token that
come within a predefined window of 60 seconds to be handled as duplicates
of the original one and thus receive the same response with the same newly
issued access token and refresh token.
In order to support that, two new fields are added in the token document. One
contains the instant (in epoqueMillis) when a given refresh token is refreshed
and one that contains a pointer to the token document that stores the new
refresh token and access token that was created by the original refresh.
A side effect of this change, that was however also a intended enhancement
for the token service, is that we needed to stop encrypting the string
representation of the UserToken while serializing. ( It was necessary as we
correctly used a new IV for every time we encrypted a token in serialization, so
subsequent serializations of the same exact UserToken would produce
different access token strings)
This change also handles the serialization/deserialization BWC logic:
In mixed clusters we keep creating tokens in the old format and
consume only old format tokens
In upgraded clusters, we start creating tokens in the new format but
still remain able to consume old format tokens (that could have been
created during the rolling upgrade and are still valid)
When reading/writing TokensInvalidationResult objects, we take into
consideration that pre 7.1.0 these contained an integer field that carried
the attempt count
Resolves#36872
Previously, the security index could be wrongfully recreated. This might
happen if the index was interpreted as missing, as in the case of a fresh
install, but the index existed and the state did not yet recover.
This fix will return HTTP SERVICE_UNAVAILABLE (503) for requests that
try to write to the security index before the state has not been recovered yet.
Investigating how to make DeleteExpiredDataIT faster, it was
revealed that the security audit trail threads were quite hot.
Disabling that seems to be helping quite a bit with making this
test faster. This commit also unmutes the test to see how it goes
with the audit trail disabled.
Relates #39658Closes#39575
MIN/MAX on strings are supported and are implemented with
TopAggs FIRST/LAST respectively, but they cannot operate on
`text` fields without underlying `keyword` fields => inexact.
Follows: #39427
`enum` is a single option from a known list of `options`
`list` is an array of unknown values
`flags` are multiple options from a list of known `options`.
We don't support the `flags` type but a `list` with `options` acts as one. This is already the case for other API's taking metric such as `node.stats.json`.
watcher.stats behaves the same as other API's as `metrics` and as such accepts the following `GET _xpack/watcher/stats/queued_watches,current_watches`
(cherry picked from commit 4c00a025b8ac9b397b27c4ae2f799553d6499412)
ML has historically used doc as the single mapping type but reindex in 7.x
will change the mapping to _doc. Switching to the typeless APIs handles
case where the mapping type is either doc or _doc. This change removes
deprecated typed usages.
This cleans up the Engine implementation by separating the sequence number generation from the
planning step in the engine, to avoid for the planning step to have any side effects. This makes it
easier to see that every sequence number is properly accounted for.
Fix bug in IndexResolver that caused conflicts in multi-field types to
be ignored up (causing the query to fail later on due to mapping
conflicts).
The issue was caused by the multi-field which forced the parent creation
before checking its validity across mappings
Fix#39547
(cherry picked from commit 4e4fe289f90b9b5eae09072d54903701a3128696)
Queries that require counting of all hits (COUNT(*) on implicit
group by), now enable accurate hit tracking.
Fix#37971
(cherry picked from commit 265b637cf6df08986a890b8b5daf012c2b0c1699)
This commit parallelizes some parts of the test
and its remove an unnecessary refresh call.
On my local machine it shaves off about 15 seconds
for a test execution time of ~64s (down from ~80s).
This test is still slow but progress over perfection.
Relates #37339
This is a backport of #38382
This change adds supports for the concurrent refresh of access
tokens as described in #36872
In short it allows subsequent client requests to refresh the same token that
come within a predefined window of 60 seconds to be handled as duplicates
of the original one and thus receive the same response with the same newly
issued access token and refresh token.
In order to support that, two new fields are added in the token document. One
contains the instant (in epoqueMillis) when a given refresh token is refreshed
and one that contains a pointer to the token document that stores the new
refresh token and access token that was created by the original refresh.
A side effect of this change, that was however also a intended enhancement
for the token service, is that we needed to stop encrypting the string
representation of the UserToken while serializing. ( It was necessary as we
correctly used a new IV for every time we encrypted a token in serialization, so
subsequent serializations of the same exact UserToken would produce
different access token strings)
This change also handles the serialization/deserialization BWC logic:
- In mixed clusters we keep creating tokens in the old format and
consume only old format tokens
- In upgraded clusters, we start creating tokens in the new format but
still remain able to consume old format tokens (that could have been
created during the rolling upgrade and are still valid)
Resolves#36872
Co-authored-by: Jay Modi jaymode@users.noreply.github.com
Backport support for replicating closed indices (#39499)
Before this change, closed indexes were simply not replicated. It was therefore
possible to close an index and then decommission a data node without knowing
that this data node contained shards of the closed index, potentially leading to
data loss. Shards of closed indices were not completely taken into account when
balancing the shards within the cluster, or automatically replicated through shard
copies, and they were not easily movable from node A to node B using APIs like
Cluster Reroute without being fully reopened and closed again.
This commit changes the logic executed when closing an index, so that its shards
are not just removed and forgotten but are instead reinitialized and reallocated on
data nodes using an engine implementation which does not allow searching or
indexing, which has a low memory overhead (compared with searchable/indexable
opened shards) and which allows shards to be recovered from peer or promoted
as primaries when needed.
This new closing logic is built on top of the new Close Index API introduced in
6.7.0 (#37359). Some pre-closing sanity checks are executed on the shards before
closing them, and closing an index on a 8.0 cluster will reinitialize the index shards
and therefore impact the cluster health.
Some APIs have been adapted to make them work with closed indices:
- Cluster Health API
- Cluster Reroute API
- Cluster Allocation Explain API
- Recovery API
- Cat Indices
- Cat Shards
- Cat Health
- Cat Recovery
This commit contains all the following changes (most recent first):
* c6c42a1 Adapt NoOpEngineTests after #39006
* 3f9993d Wait for shards to be active after closing indices (#38854)
* 5e7a428 Adapt the Cluster Health API to closed indices (#39364)
* 3e61939 Adapt CloseFollowerIndexIT for replicated closed indices (#38767)
* 71f5c34 Recover closed indices after a full cluster restart (#39249)
* 4db7fd9 Adapt the Recovery API for closed indices (#38421)
* 4fd1bb2 Adapt more tests suites to closed indices (#39186)
* 0519016 Add replica to primary promotion test for closed indices (#39110)
* b756f6c Test the Cluster Shard Allocation Explain API with closed indices (#38631)
* c484c66 Remove index routing table of closed indices in mixed versions clusters (#38955)
* 00f1828 Mute CloseFollowerIndexIT.testCloseAndReopenFollowerIndex()
* e845b0a Do not schedule Refresh/Translog/GlobalCheckpoint tasks for closed indices (#38329)
* cf9a015 Adapt testIndexCanChangeCustomDataPath for replicated closed indices (#38327)
* b9becdd Adapt testPendingTasks() for replicated closed indices (#38326)
* 02cc730 Allow shards of closed indices to be replicated as regular shards (#38024)
* e53a9be Fix compilation error in IndexShardIT after merge with master
* cae4155 Relax NoOpEngine constraints (#37413)
* 54d110b [RCI] Adapt NoOpEngine to latest FrozenEngine changes
* c63fd69 [RCI] Add NoOpEngine for closed indices (#33903)
Relates to #33888
* SYS COLUMNS will skip UNSUPPORTED field types in ODBC and JDBC, as well.
NESTED and OBJECT types were already skipped in ODBC mode, now they are
skipped in JDBC mode, as well.
(cherry picked from commit 9e0df64b2d36c9069dfa506570468f0522c86417)
For functions: move checks for `text` fields without underlying `keyword`
fields or with many of them (ambiguity) to the type resolution stage.
For Order By/Group By: move checks to the `Verifier` to catch early
before `QueryTranslator` or execution.
Closes: #38501Fixes: #35203
This commit adds a simple integ test that exercises the flow:
* snapshot .security
* delete .security
* restore .security
, checking that the Native Realm works as expected.
Relates #34454
fix a couple of odd behaviors of data frame transforms REST API's:
- check if id from body and id from URL match if both are specified
- do not allow a body for delete
- allow get and stats without specifying an id
Backport of #39325
When ILM is disabled and Watcher is setting up the templates and policies for
the watch history indices, it will now use a template that does not have the
`index.lifecycle.name` setting, so that indices are not created with the
setting.
This also adds tests for the behavior, and changes the cluster state used in
these tests to be real instead of mocked.
Resolves#38805
This change fixes the tests that expect the reload of a
SSLConfiguration to fail. The tests relied on an incorrect assumption
that the reloader only called reload on for an SSLConfiguration if the
key and trust managers were successfully reloaded, but that is not the
case. This change removes the fail call with a wrapped call to the
original method and captures the exception and counts down a latch to
make these tests consistently tested.
Closes#39260
Backport of #39350
Contains the following:
* LUCENE-8635: Move terms dictionary off-heap for non-primary-key fields in `MMapDirectory`
* LUCENE-8292: `TermsEnum` is fully abstract
* LUCENE-8679: Return WITHIN in `EdgeTree#relateTriangle` only when polygon and triangle share one edge
* LUCENE-8676: Nori tokenizer deals correctly with large buffers
* LUCENE-8697: `GraphTokenStreamFiniteStrings` better handles side paths with gaps
* LUCENE-8664: Add `equals` and `hashCode` to `TotalHits`
* LUCENE-8660: `TopDocsCollector` returns accurate hit counts if the total equals the threshold
* LUCENE-8654: `Polygon2D#relateTriangle` fix for when the polygon is inside the triangle
* LUCENE-8645: `Intervals#fixField` can merge intervals from different fields
* LUCENE-8585: Create jump-tables for DocValues at index time
Previously, if a text field had an underlying keyword field
the latter was not used instead of the text leading to wrong
results returned by queries filtering with LIKE/RLIKE.
Fixes: #39442
The ScheduledEvent class has never preserved the time
zone so it makes more sense for it to store the start and
end time using Instant rather than ZonedDateTime.
Closes#38620
* Add "columnar" option for REST requests (but be lenient for non-"plain"
modes) for json, yaml, smile and cbor formats.
* Updated documentation
(cherry picked from commit 5b7e0de237fb514d14a61a347bc669d4b4adbe56)
Currently there are two security tests that specifically target the
netty security transport. This PR moves the client authentication tests
into `AbstractSimpleSecurityTransportTestCase` so that the nio transport
will also be tested.
Additionally the work to build transport configurations is moved out of
the netty transport and tested independently.
This changes the name of the internal security index to ".security-7",
but supports indices that were upgraded from earlier versions and use
the ".security-6" name.
In all cases, both ".security-6" and ".security-7" are considered to
be restricted index names regardless of which name is actually in use
on the cluster.
Backport of: #39337
Some small fix for the `x-pack` rest api spec.
* In both `security.enable_user.json` and `security.disable_user.json`
the `username` parameter was `false` instead of `true`
(the documentation is already correct).
* In `security.get_privileges.json` there were missing all the
possible paths since the path parameters are not required.
This fix aligns the document with the rest of the spec,
where all the possible combinations are listed.
It is possible that the Unfollow API may fail to release shard history
retention leases when unfollowing, so this needs to be handled by the
ILM Unfollow action. There's nothing much that can be done automatically
about it from the follower side, so this change makes the ILM unfollow
action simply ignore those failures.
This change is a backport of #39252
- Fixes TokenBackwardsCompatibilityIT: Existing tests seemed to made
the assumption that in the oneThirdUpgraded stage the master node
will be on the old version and in the twoThirdsUpgraded stage, the
master node will be one of the upgraded ones. However, there is no
guarantee that the master node in any of the states will or will
not be one of the upgraded ones.
This class now tests:
- That we can generate and consume tokens before we start the
rolling upgrade.
- That we can consume tokens generated in the old cluster during
all the stages of the rolling upgrade.
- That while on a mixed cluster, when/if the master node is
upgraded, we can generate, consume and refresh a token
- That after the rolling upgrade, we can consume a token
generated in an old cluster and can invalidate it so that it
can't be used any more.
- Ensures that during the rolling upgrade, the upgraded nodes have
the same configuration as the old nodes. Specifically that the
file realm we use is explicitly named `file1`. This is needed
because while attempting to refresh a token in a mixed cluster
we might create a token hitting an old node and attempt to refresh
it hitting a new node. If the file realm name is not the same, the
refresh will be seen as being made by a "different" client, and
will, thus, fail.
- Renames the Authentication variable we check while refreshing a
token to be clientAuth in order to make the code more readable.
Some of the above were possibly causing the flakiness of #37379
Today when users upgrade to 7.0, existing indices will automatically
switch to soft-deletes without an opt-out option. With this change,
we only enable soft-deletes by default for new indices.
Relates #36141
This commit is the final piece of the integration of CCR with retention
leases. Namely, we periodically renew retention leases and advance the
retaining sequence number while following.
* Remove Hipchat support from Watcher (#39199)
Hipchat has been shut down and has previously been deprecated in
Watcher (#39160), therefore we should remove support for these actions.
* Add migrate note
With this change, we won't wait for the local checkpoint to advance to
the max_seq_no before starting phase2 of peer-recovery. We also remove
the sequence number range check in peer-recovery. We can safely do these
thanks to Yannick's finding.
The replication group to be used is currently sampled after indexing
into the primary (see `ReplicationOperation` class). This means that
when initiating tracking of a new replica, we have to consider the
following two cases:
- There are operations for which the replication group has not been
sampled yet. As we initiated the new replica as tracking, we know that
those operations will be replicated to the new replica and follow the
typical replication group semantics (e.g. marked as stale when
unavailable).
- There are operations for which the replication group has already been
sampled. These operations will not be sent to the new replica. However,
we know that those operations are already indexed into Lucene and the
translog on the primary, as the sampling is happening after that. This
means that by taking a snapshot of Lucene or the translog, we will be
getting those ops as well. What we cannot guarantee anymore is that all
ops up to `endingSeqNo` are available in the snapshot (i.e. also see
comment in `RecoverySourceHandler` saying `We need to wait for all
operations up to the current max to complete, otherwise we can not
guarantee that all operations in the required range will be available
for replaying from the translog of the source.`). This is not needed,
though, as we can no longer guarantee that max seq no == local
checkpoint.
Relates #39000Closes#38949
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
when dealing with TimeoutException
The `IndexFollowingIT#testDeleteLeaderIndex()`` test failed,
because a NPE was captured as fatal error instead of an IndexNotFoundException.
Closes#39308
There have been intermittent failures where either
LDAP server could not be started or KDC server could
not be started causing failures during test runs.
`KdcNetwork` class from Apache kerby project does not set reuse
address to `true` on the socket so if the port that we found to be free
is in `TIME_WAIT` state it may fail to bind. As this is an internal
class for kerby, I could not find a way to extend.
This commit adds a retry loop for initialization. It will keep
trying in an await busy loop and fail after 10 seconds if not
initialized.
Closes#35982
Finally! This commit should fix the issues with the CCR retention lease
that has been plaguing build failures. The issue here is that we are
trying to prevent the clear session requests from being executed until
after we have been able to validate that retention leases are being
renewed. However, we were only blocking the clear session requests but
not blocking them when they are proxied through another node. This
commit addresses that.
Relates #39268
This commit changes the sort order of shard stats that are collected in
CCR retention lease integration tests. This change is done so that
primaries appear first in sort order.
This test fails rarely but it is flaky in its current form. The problem
here is that we lack a guarantee on the retention leases having been
synced to all shard copies. We need to sleep long enough to ensure that
that occurs, and then we can sample the retention leases, possibly sleep
again (we usually will not have too since the first sleep will have been
long enough to allow a sync and a renewal to happen, if one was going to
happen), and the sample the retention leases for comparison.
Closes#39331
The shard logged here is the leader shard but it should be the follower
shard since this background retention lease renewal is happening on the
follower side. This commit fixes that.
This commit simplifies the use of transport mocking in the CCR retention
lease integration tests. Instead of adding a send rule between nodes, we
add a default send rule. This greatly simplifies the code here, and
speeds the test up a little bit too.
This fixes#39245. Currently it is possible in this test that the clear
session call times-out. This means that the index commit will not be
released and there will be an assertion triggered in the test teardown.
This commit ensures that we wipe the leader index in the test to avoid
this assertion.
It is okay if the clear session call times-out in normal usage. This
scenario is unavoidable due to potential network issues. We have a local
timeout on the leader to clean it up when this scenario happens.
The assertBusy() that waits the default 10 seconds for a
datafeed to complete very occasionally times out on slow
machines. This commit increases the timeout to 60 seconds.
It will almost never actually take this long, but it's
better to have a timeout that will prevent time being
wasted looking at spurious test failures.
This test should no longer pass when the functionality it is intended to
test is broken, as it now indexes a number of documents and verifies
that the index is staying on the same step until after indexing and
replication of those documents is finished. This prevents the test from
passing if the leader index progresses in its lifecycle during that time.
This test failed once in a very long time with the assertion
that there is no document for the `non_existing_job` in the
state index. I could not see how that is possible and I cannot
reproduce. With this commit the failure message will reveal
some examples of the left behind docs which might shed a light
about what could go wrong.
With this commit we remove all usages of the deprecated method
`ExceptionsHelper#detailedMessage` in tests. We do not address
production code here but rather in dedicated follow-up PRs to keep the
individual changes manageable.
Relates #19069
This commit makes `TransformIntegrationTests` into a standard integration test, as
opposed to using `TimeWarp`, which registers the mock component
`ScheduleEngineTriggerMock` to trigger watches.
The simplification may help with flakiness we've observed `TimeWarp, as in #37882.
The SchedulerEngine is used in several places in our code and not all
of these usages properly stopped the SchedulerEngine, which could lead
to test failures due to leaked threads from the SchedulerEngine. This
change adds stopping to these usages in order to avoid the thread leaks
that cause CI failures and noise.
Closes#38875
Currently remote compression and ping schedule settings are dynamic.
However, we do not listen for changes. This commit adds listeners for
changes to those two settings. Additionally, when those settings change
we now close existing connections and open new ones with the settings
applied.
Fixes#37201.
Sleeps in tests smell funny, and we try to avoid them to the extent
possible. We are using a small one in a CCR test. This commit clarifies
the purpose of that sleep by adding a comment explaining it. We also
removed a hard-coded value from the test, that if we ever modified the
value higher up where it was set, we could end up forgetting to change
the value here. Now we ensure that these would move in lock step if we
ever maintain them later.
We have some CCR tests where we use mock transport send rules to control
the behavior that we desire in these tests. Namely, we want to simulate
an exception being thrown on the leader side, or a variety of other
situations. These send rules were put in place between the data nodes on
each side. However, it might not be the case that these requests are
being sent between data nodes. For example, a request that is handled on
a non-data master node would not be sent from a data node. And it might
not be the case that the request is sent to a data node, as it could be
proxied through a non-data coordinating node. This commit addresses this
by putting these send rules in places between all nodes on each side.
Closes#39011Closes#39201
`ReadOnlyEngine` never recovers operations from translog and never
updates translog information in the index shard's recovery state, even
though the recovery state goes through the `TRANSLOG` stage during
the recovery. It means that recovery information for frozen shards indicates
an unkown number of recovered translog ops in the Recovery APIs
(translog_ops: `-1` and translog_ops_percent: `-1.0%`) and this is confusing.
This commit changes the `recoverFromTranslog()` method in `ReadOnlyEngine`
so that it always recover from an empty translog snapshot, allowing the recovery
state translog information to be correctly updated.
Related to #33888
Initially in #38910, ShardFollowTask was reusing ImmutableFollowParameters'
serialization logic. After merging, bwc tests failed sometimes and
the binary serialization that ShardFollowTask was originally was using
was added back. ImmutableFollowParameters is using optional fields (optional vint)
while ShardFollowTask was not (vint).
Today we always refresh when looking up the primary term in
FollowingEngine. This is not necessary for we can simply
return none for operations before the global checkpoint.
The follower won't always have the same history as the leader for its
soft-deletes retention can be different. However, if some operation
exists on the history of the follower, then the same operation must
exist on the leader. This change relaxes the history check in
ShardFollowTaskReplicationTests.
Closes#39093
This commit introduces the retention leases to ESIndexLevelReplicationTestCase,
then adds some tests verifying that the retention leases replication works
correctly in spite of the presence of the primary failover or out of order
delivery of retention leases sync requests.
Relates #37165
This change aims to fix failures in the session factory load balancing
tests that mock failure scenarios. For these tests, we randomly shut
down ldap servers and bind a client socket to the port they were
listening on. Unfortunately, we would occasionally encounter failures
in these tests where a socket was already in use and/or the port
we expected to connect to was wrong and in fact was to one of the ldap
instances that should have been shut down.
The failures are caused by the behavior of certain operating systems
when it comes to binding ports and wildcard addresses. It is possible
for a separate application to be bound to a wildcard address and still
allow our code to bind to that port on a specific address. So when we
close the server socket and open the client socket, we are still able
to establish a connection since the other application is already
listening on that port on a wildcard address. Another variant is that
the os will allow a wildcard bind of a server socket when there is
already an application listening on that port for a specific address.
In order to do our best to prevent failures in these scenarios, this
change does the following:
1. Binds a client socket to all addresses in an awaitBusy
2. Adds assumption that we could bind all valid addresses
3. In the case that we still establish a connection to an address that
we should not be able to, try to bind and expect a failure of not
being connected
Closes#32190
This commit fixes a broken CCR retention lease unfollow test. The
problem with the test is that the random subset of shards that we picked
to disrupt would not necessarily overlap with the actual shards in
use. We could take a non-empty subset of [0, 3] (e.g., { 2 }) when the
only shard IDs in use were [0, 1]. This commit fixes this by taking into
account the number of shards in use in the test.
With this change, we also take measure to ensure that a successful
branch is tested more frequently than would otherwise be the case. On
that branch, we want to sometimes pretend that the retention lease is
already removed. The randomness here was also sometimes selecting a
subset of shards that did not overlap with the shards actually in use
during the test. While this does not break the test, it is confusing and
reduces the amount of coverage of that branch.
Relates #39185
In most of the places we avoid creating the `.security` index (or updating the mapping)
for read/search operations. This is more of a nit for the case of the getRole call,
that fixes a possible mapping update during a get role, and removes a dead if branch
about creating the `.security` index.
This commit attempts to remove the retention leases on the leader shards
when unfollowing an index. This is best effort, since the leader might
not be available.
This defaults to "true" (current behavior) and will throw an exception
if there is a property that cannot be recognized. If "false", it will
ignore anything unrecognizable.
(cherry picked from commit 38fbf9792bcf4fe66bb3f17589e5fe6d29748d07)
The watcher trigger service could attempt to modify the perWatchStats
map simultaneously from multiple threads. This would cause the
internal state to become inconsistent, in particular the count()
method may return an incorrect value for the number of watches.
This changes replaces the implementation of the map with a
ConcurrentHashMap so that its internal state remains consistent even
when accessed from mutiple threads.
Backport of: #39092
The ML memory tracker does searches against ML results
and config indices. These searches can be asynchronous,
and if they are running while the node is closing then
they can cause problems for other components.
This change adds a stop() method to the MlMemoryTracker
that waits for in-flight searches to complete. Once
stop() has returned the MlMemoryTracker will not kick
off any new searches.
The MlLifeCycleService now calls MlMemoryTracker.stop()
before stopping stopping the node.
Fixes#37117
These two changes are interlinked.
Before this change unsetting ML upgrade mode would wait for all
datafeeds to be assigned and not waiting for their corresponding
jobs to initialise. However, this could be inappropriate, if
there was a reason other that upgrade mode why one job was unable
to be assigned or slow to start up. Unsetting of upgrade mode
would hang in this case.
This change relaxes the condition for considering upgrade mode to
be unset to simply that an assignment attempt has been made for
each ML persistent task that did not fail because upgrade mode
was enabled. Thus after unsetting upgrade mode there is no
guarantee that every ML persistent task is assigned, just that
each is not unassigned due to upgrade mode.
In order to make setting upgrade mode work immediately after
unsetting upgrade mode it was then also necessary to make it
possible to stop a datafeed that was not assigned. There was
no particularly good reason why this was not allowed in the past.
It is trivial to stop an unassigned datafeed because it just
involves removing the persistent task.
Prior to this commit, if during fetch leader / follower GCP
a fatal error occurred, then the shard follow task was removed.
This is unexpected, because if such an error occurs during the lifetime of shard follow task then replication is stopped and the fatal error flag is set. This allows the ccr stats api to report the fatal exception that has occurred (instead of the user grepping through the elasticsearch logs).
This issue was found by a rare failure of the `FollowStatsIT#testFollowStatsApiIncludeShardFollowStatsWithRemovedFollowerIndex` test.
Closes#38779
* Disable specific locales for tests in fips mode
The Bouncy Castle FIPS provider that we use for running our tests
in fips mode has an issue with locale sensitive handling of Dates as
described in https://github.com/bcgit/bc-java/issues/405
This causes certificate validation to fail if any given test that
includes some form of certificate validation happens to run in one
of the locales. This manifested earlier in #33081 which was
handled insufficiently in #33299
This change ensures that the problematic 3 locales
* th-TH
* ja-JP-u-ca-japanese-x-lvariant-JP
* th-TH-u-nu-thai-x-lvariant-TH
will not be used when running our tests in a FIPS 140 JVM. It also
reverts #33299
The .ml-annotations index is created asynchronously when
some other ML index exists. This can interfere with the
post-test index deletion, as the .ml-annotations index
can be created after all other indices have been deleted.
This change adds an ML specific post-test cleanup step
that runs before the main cleanup and:
1. Checks if any ML indices exist
2. If so, waits for the .ml-annotations index to exist
3. Deletes the other ML indices found in step 1.
4. Calls the super class cleanup
This means that by the time the main post-test index
cleanup code runs:
1. The only ML index it has to delete will be the
.ml-annotations index
2. No other ML indices will exist that could trigger
recreation of the .ml-annotations index
Fixes#38952
* Fix#38623 remove xpack namespace REST API
Except for xpack.usage and xpack.info API's, this moves the last remaining API's out of the xpack namespace
* rename xpack api's inside inside the files as well
* updated yaml tests references to xpack namespaces api's
* update callsApi calls in the IT subclasses
* make sure docs testing does not use xpack namespaced api's
* fix leftover xpack namespaced method names in docs/build.gradle
* found another leftover reference
(cherry picked from commit ccb5d934363c37506b76119ac050a254fa80b5e7)
The data frame plugin allows users to create feature indexes by pivoting a source index. In a
nutshell this can be understood as reindex supporting aggregations or similar to the so called entity
centric indexing.
Full history is provided in: feature/data-frame-transforms
* During fetching remote mapping if remote client is missing then
`NoSuchRemoteClusterException` was not handled.
* When adding remote connection, check that it is really connected
before continue-ing to run the tests.
Relates to #38695
Follow index in follow cluster that follows an index in the leader cluster and another
follow index in the leader index that follows that index in the follow cluster.
During the upgrade index following is paused and after the upgrade
index following is resumed and then verified index following works as expected.
Relates to #38037
This commit is the first step in integrating shard history retention
leases with CCR. In this commit we integrate shard history retention
leases with recovery from remote. Before we start transferring files, we
take out a retention lease on the primary. Then during the file copy
phase, we repeatedly renew the retention lease. Finally, when recovery
from remote is complete, we disable the background renewing of the
retention lease.
This commit adds a `ListenerTimeouts` class that will wrap a
`ActionListener` in a listener with a timeout scheduled on the generic
thread pool. If the timeout expires before the listener is completed,
`onFailure` will be called with an `ElasticsearchTimeoutException`.
Timeouts for the get ccr file chunk action are implemented using this
functionality. Additionally, this commit attempts to fix#38027 by also
blocking proxied get ccr file chunk actions. This test being un-muted is
useful to verify the timeout functionality.
Today when processing an operation on a replica engine (or the
following engine), we first add it to Lucene, then add it to translog,
then finally marks its seq_no as completed. If a flush occurs after step1,
but before step-3, the max_seq_no in the commit's user_data will be
smaller than the seq_no of some documents in the Lucene commit.
We verify seq_no_stats is aligned between copies at the end of some
disruption tests. Sometimes, the assertion `assertSeqNos` is tripped due
to a lagged global checkpoint on replicas. The global checkpoint on
replicas is lagged because we sync the global checkpoint 30 seconds (by
default) after the last replication operation. This change reduces the
global checkpoint sync-internal to 1s in the disruption tests.
Closes#38318Closes#36789
The CCR REST tests that rely on these assertions are flaky. They are
flaky since the introduction of recovery from the remote.
The underlying problem is this: these tests are making assertions about
the number of operations read by the shard following task. However, with
recovery from remote, we no longer have guarantees that the assumptions
these tests were relying on hold. Namely, these tests were assuming that
the only way that a document could land in the follower index is via the
shard following task. With recovery from remote, there is another way,
which is via the files that are copied over during the recovery
phase. Most of the time this will not be a problem because with the
small number of documents that we are indexing in these tests, it is
usally not the case that a flush would occur and so there would not be
any documents in the files copied over. However, a flush can occur any
time at which point all of the indexed documents could end up in a safe
commit and copied over during recovery from remote. This commit modifies
these assertions to ones that are not prone to this issue, yet still
validate the health of the follower shard.
Few tests failed intermittently and most of the
times due to invalidated or expired keys that were
deleted were still reported in search results.
This commit removes the test and adds enhancements
to other tests testing different scenario's.
When ExpiredApiKeysRemover is triggered, the tests
did not await its termination thereby sometimes
the results would be wrong for a search operation.
DELETE_INTERVAL setting has been further reduced to
100ms so we can trigger ExpiredApiKeysRemover faster.
Closes#38408
The rest of `CCRIT` is now no longer relevant, because the remaining
test tests the same of the index following test in the rolling upgrade
multi cluster module.
Added `tests.upgrade_from_version` version to test. It is not needed
in this branch, but is in 6.7 branch.
Closes#37231
The previous logic for concurrent file chunk fetching did not allow for multiple chunks from the same
file to be fetched in parallel. The parallelism only allowed to fetch chunks from different files in
parallel. This required complex logic on the follower to be aware from which file it was already
fetching information, in order to ensure that chunks for the same file would be fetched in sequential
order. During benchmarking, this exhibited throughput issues when recovery came towards the end,
where it would only be sequentially fetching chunks for the same largest segment file, with
throughput considerably going down in a high-latency network as there was no parallelism anymore.
The new logic here follows the peer recovery model more closely, and sends multiple requests for
the same file in parallel, and then reorders the results as necessary. Benchmarks show that this
leads to better overall throughput and the implementation is also simpler.
Backport of #38818 to `7.x`. Original description:
The HTTP exporter code in the Monitoring plugin makes `GET _template` requests to check for existence of templates. These requests don't need to pass the `include_type_name` query parameter so this PR removes it from the request. This should remove the following deprecation log entries on the Monitoring cluster in 7.0.0 onwards:
```
[types removal] Specifying include_type_name in get index template requests is deprecated.
```
This change makes the writing of new usage data conditional based on
the version that is being written to. A test has also been added to
ensure serialization works as expected to an older version.
Relates #38687, #38917
This change updates the authentication service to use a consistent view
of the realms based on the license state at the start of
authentication. Without this, the license can change during
authentication of a request and it will result in a failure if the
realm that extracted the token is no longer in the realm list. This
manifests in some tests as an authentication failure that should never
really happen; one example would be the test framework's transport
client user should always have a succesful authentication but in the
LicensingTests this can fail and will show up as a
NoNodeAvailableException.
Additionally, the licensing tests have been updated to ensure that
there is consistency when changing the license. The license is changed
by modifying the internal xpack license state on each node, which has
no protection against be changed by some pending cluster action. The
methods to disable and enable now ensure we have a green cluster and
that the cluster is consistent before returning.
Closes#30301
This changes the output of the `_cat/indices` API with `Security` enabled.
It is possible to only display the index name (and possibly the index
health, depending on the request options) but not its stats (doc count, merges,
size, etc). This is the case for closed indices which have index metadata in the
cluster state but no associated shards, hence no shard stats.
However, when `Security` is enabled, and the request contains wildcards,
**open** indices without stats are a common occurrence. This is because the
index names in the response table are picked up directly from the cluster state
which is not filtered by `Security`'s _indexNameExpressionResolver_, unlike the
stats data which is populated by the indices stats API which does go through the
index name resolver.
This is a bug, because it is circumventing `Security`'s function to hide
unauthorized indices.
This has been fixed by displaying the index names as they are resolved by the indices
stats API. The outputs of these two APIs is now very similar: same index names,
similar data but different format.
Closes#37190
Right now there is no way to determine whether the
token service or API key service is enabled or not.
This commit adds support for the enabled status of
token and API key service to the security feature set
usage API `/_xpack/usage`.
Closes#38535
The should fix the following NPE:
```
[2019-02-11T23:27:48,452][WARN ][o.e.p.PersistentTasksNodeService] [node_s_0] task kD8YzUhHTK6uKNBNQI-1ZQ-0 failed with an exception
1> java.lang.NullPointerException: null
1> at org.elasticsearch.xpack.ccr.action.ShardFollowTasksExecutor.lambda$fetchFollowerShardInfo$7(ShardFollowTasksExecutor.java:305) ~[main/:?]
1> at org.elasticsearch.action.ActionListener$1.onResponse(ActionListener.java:61) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.TransportAction$1.onResponse(TransportAction.java:68) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.TransportAction$1.onResponse(TransportAction.java:64) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction.onCompletion(TransportBroadcastByNodeAction.java:383) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction.onNodeResponse(TransportBroadcastByNodeAction.java:352) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction$1.handleResponse(TransportBroadcastByNodeAction.java:324) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction$1.handleResponse(TransportBroadcastByNodeAction.java:314) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.TransportService$ContextRestoreResponseHandler.handleResponse(TransportService.java:1108) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.TransportService$DirectResponseChannel.processResponse(TransportService.java:1189) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.TransportService$DirectResponseChannel.sendResponse(TransportService.java:1169) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.TaskTransportChannel.sendResponse(TaskTransportChannel.java:54) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$BroadcastByNodeTransportRequestHandler.messageReceived(TransportBroadcastByNodeAction.java:417) [elasticsearch-8.0.0-SNAP
SHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$BroadcastByNodeTransportRequestHandler.messageReceived(TransportBroadcastByNodeAction.java:391) [elasticsearch-8.0.0-SNAP
SHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.RequestHandlerRegistry.processMessageReceived(RequestHandlerRegistry.java:63) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.TransportService$7.doRun(TransportService.java:687) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.common.util.concurrent.ThreadContext$ContextPreservingAbstractRunnable.doRun(ThreadContext.java:751) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.common.util.concurrent.AbstractRunnable.run(AbstractRunnable.java:37) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [?:1.8.0_202]
1> at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [?:1.8.0_202]
1> at java.lang.Thread.run(Thread.java:748) [?:1.8.0_202]
```
Relates to #38779
* Add rolling upgrade multi cluster test module (#38277)
This test starts 2 clusters, each with 3 nodes.
First the leader cluster is started and tests are run against it and
then the follower cluster is started and tests execute against this two cluster.
Then the follower cluster is upgraded, one node at a time.
After that the leader cluster is upgraded, one node at a time.
Every time a node is upgraded tests are ran while both clusters are online.
(and either leader cluster has mixed node versions or the follower cluster)
This commit only tests CCR index following, but could be used for CCS tests as well.
In particular for CCR, unidirectional index following is tested during a rolling upgrade.
During the test several indices are created and followed in the leader cluster before or
while the follower cluster is being upgraded.
This tests also verifies that attempting to follow an index in the upgraded cluster
from the not upgraded cluster fails. After both clusters are upgraded following the
index that previously failed should succeed.
Relates to #37231 and #38037
* Filter out upgraded version index settings when starting index following (#38838)
The `index.version.upgraded` and `index.version.upgraded_string` are likely
to be different between leader and follower index. In the event that
a follower index gets restored on a upgraded node while the leader index
is still on non-upgraded nodes.
Closes#38835
When shutting down Watcher, the `bulkProcessor` is null if watcher has been
disabled in the configuration. This protects the flush and close calls with a
check for watcher enabled to avoid a NullPointerException
Resolves#38798
Currently we index documents concurrently to attempt to ensure that we
update mappings during the restore process. However, this does not
actually test that the mapping will be correct and is dangerous as it
can lead to a misalignment between the max sequence number and the local
checkpoint. If these are not aligned, peer recovery cannot be completed
without initiating following which this test does not do. That causes
teardown assertions to fail.
This commit removes the concurrent indexing and flushes after the
documents are indexed. Additionally it modifies the mapping specific
test to ensure that there is a mapping update when the restore session
is initiated. This mapping update is picked up at the end of the restore
by the follower.
Instead of using `WarningsHandler.PERMISSIVE`, we only match warnings
that are due to types removal.
This PR also renames `allowTypeRemovalWarnings` to `allowTypesRemovalWarnings`.
Relates to #37920.
Forward port of https://github.com/elastic/elasticsearch/pull/38757
This change reverts the initial 7.0 commits and replaces them
with the 6.7 variant that still allows for the ecs flag.
This commit differs from the 6.7 variants in that ecs flag will
now default to true.
6.7: `ecs` : default `false`
7.x: `ecs` : default `true`
8.0: no option, but behaves as `true`
* Revert "Ingest node - user agent, move device to an object (#38115)"
This reverts commit 5b008a34aa.
* Revert "Add ECS schema for user-agent ingest processor (#37727) (#37984)"
This reverts commit cac6b8e06f.
* cherry-pick 5dfe1935345da3799931fd4a3ebe0b6aa9c17f57
Add ECS schema for user-agent ingest processor (#37727)
* cherry-pick ec8ddc890a34853ee8db6af66f608b0ad0cd1099
Ingest node - user agent, move device to an object (#38115) (#38121)
* cherry-pick f63cbdb9b426ba24ee4d987ca767ca05a22f2fbb (with manual merge fixes)
Dep. check for ECS changes to User Agent processor (#38362)
* make true the default for the ecs option, and update 7.0 references and tests
Change the formatting for Watcher.status.lastCheck and lastMetCondition
to be the same as Watcher.status.state.timestamp. These should all have
only millisecond precision
closes#38619
backport #38626
Alpar Torok
Ioannis Kakavas
Christoph Büscher
Gordon Brown
Yogesh Gaikwad
Lee Hinman
Nik Everett
Martijn van Groningen
Hendrik Muhs
Benjamin Trent
Armin Braun
Dimitris Athanasiou
Jason Tedor
Chris Earle
Przemysław Witek
Albert Zaharovits
Costin Leau
Andrei Stefan
Julie Tibshirani
Mark Vieira
Marios Trivyzas
David Kyle
Tim Vernum
Jay Modi
David Turner
Brandon Kobel
Jim Ferenczi
David Roberts
Alexander Reelsen
Zachary Tong
Marios Trivyzas
James Rodewig
Ryan Ernst
krisds
Luca Cavanna
Igor Motov
Yannick Welsch
Adrien Grand
Tim Brooks
Sébastien Loix
Like
alex101101
Ed Savage
Nhat Nguyen
Lisa Cawley
Henning Andersen
Mark Vovchuk
jaymode
Jake Landis
Ioannis Kakavas
Michael Basnight
Daniel Mitterdorfer
Przemyslaw Gomulka
Tomas Della Vedova
Simon Willnauer
Martijn Laarman
Tim Vernum
Tanguy Leroux
Shajahan Palayil
Alan Woodward
Mehran Koushkebaghi
Costin Leau
Tal Levy
iverase
Shaunak Kashyap