Node roles are now serialized as well, they are not part of the node attributes anymore. DiscoveryNodeService takes care of dividing settings into attributes and roles. DiscoveryNode always requires to pass in attributes and roles separately.
This change moves placeholder replacement to a pkg private class for
settings. It also adds a null check when calling replacement, as
settings objects can still contain null values, because we only prohibit
nulls on file loading. Finally, this cleans up file and stream loading a
bit to not have unnecessary exception wrapping.
We can be better at checking `buffer_size` and `chunk_size` for S3 repositories.
For example, we know that:
* `buffer_size` should be more than `5mb`
* `chunk_size` should be no more than `5tb`
* `buffer_size` should be lower than `chunk_size`
Otherwise, setting `buffer_size` is useless.
For the record:
`chunk_size` is a Snapshot setting whatever the implementation is.
`buffer_size` is an S3 implementation setting.
Let say that you are snapshotting a 500mb file. If you set `chunk_size` to `200mb`, then Snapshot service will call S3 repository to snapshot 3 files with the following sizes:
* `200mb`
* `200mb`
* `100mb`
If you set `buffer_size` to `100mb` (AWS maximum size recommendation), the first file of `200mb` will be uploaded on S3 using the multipart feature in 2 chunks and the workflow is basically the following:
* create the multipart request and get back an `id` from AWS S3 platform
* upload part1: `100mb`
* upload part2: `100mb`
* "commit" the full upload using the `id`.
Closes#17244.
Today we allow to set all kinds of index level settings on the node level which
is error prone and difficult to get right in a consistent manner.
For instance if some analyzers are setup in a yaml config file some nodes might
not have these analyzers and then index creation fails.
Nevertheless, this change allows some selected settings to be specified on a node level
for instance:
* `index.codec` which is used in a hot/cold node architecture and it's value is really per node or per index
* `index.store.fs.fs_lock` which is also dependent on the filesystem a node uses
All other index level setting must be specified on the index level. For existing clusters the index must be closed
and all settings must be updated via the API on each of the indices.
Closes#16799
The build currently uses the old maven support in gradle. This commit
switches to use the newer maven-publish plugin. This will allow future
changes, for example, easily publishing to artifactory.
An additional part of this change makes publishing of build-tools part
of the normal publishing, instead of requiring a separate upload step
from within buildSrc. That also sets us up for a follow up to enable
precomit checks on the buildSrc code itself.
Add infrastructure to run REST tests on a multi-version cluster
This change adds the infrastructure to run the rest tests on a multi-node
cluster that users 2 different minor versions of elasticsearch. It doesn't implement
any dedicated BWC tests but rather leverages the existing REST tests.
Since we don't have a real version to test against, the tests uses the current version
until the first minor / RC is released to ensure the infrastructure works.
Given the amount of problems this change already found I think it's worth having this run with our test suite by default. The structure of this infra will likely change over time but for now it's a step into the right direction. We will likely want to split it up into integTests and integBwcTests etc. so each plugin can have it's own bwc tests but that's left for future refactoring.
Today, certain bootstrap properties are set and read via system
properties. This action-at-distance way of managing these properties is
rather confusing, and completely unnecessary. But another problem exists
with setting these as system properties. Namely, these system properties
are interpreted as Elasticsearch settings, not all of which are
registered. This leads to Elasticsearch failing to startup if any of
these special properties are set. Instead, these properties should be
kept as local as possible, and passed around as method parameters where
needed. This eliminates the action-at-distance way of handling these
properties, and eliminates the need to register these non-setting
properties. This commit does exactly that.
Additionally, today we use the "-D" command line flag to set the
properties, but this is confusing because "-D" is a special flag to the
JVM for setting system properties. This creates confusion because some
"-D" properties should be passed via arguments to the JVM (so via
ES_JAVA_OPTS), and some should be passed as arguments to
Elasticsearch. This commit changes the "-D" flag for Elasticsearch
settings to "-E".
Add REST test for:
* `.doc`
* `.docx`
The later fails with:
```
==> Test Info: seed=DB93397128B876D4; jvm=1; suite=1
Suite: org.elasticsearch.ingest.attachment.IngestAttachmentRestIT
2> REPRODUCE WITH: gradle :plugins:ingest-attachment:integTest -Dtests.seed=DB93397128B876D4 -Dtests.class=org.elasticsearch.ingest.attachment.IngestAttachmentRestIT -Dtests.method="test {yaml=ingest_attachment/30_files_supported/Test ingest attachment processor with .docx file}" -Des.logger.level=WARN -Dtests.security.manager=true -Dtests.locale=bg -Dtests.timezone=Europe/Athens
FAILURE 4.53s | IngestAttachmentRestIT.test {yaml=ingest_attachment/30_files_supported/Test ingest attachment processor with .docx file} <<< FAILURES!
> Throwable #1: java.lang.AssertionError: expected [2xx] status code but api [index] returned [400 Bad Request] [{"error":{"root_cause":[{"type":"parse_exception","reason":"Error parsing document in field [field1]"}],"type":"parse_exception","reason":"Error parsing document in field [field1]","caused_by":{"type":"tika_exception","reason":"Unexpected RuntimeException from org.apache.tika.parser.microsoft.ooxml.OOXMLParser@7f85baa5","caused_by":{"type":"illegal_state_exception","reason":"access denied (\"java.lang.RuntimePermission\" \"getClassLoader\")","caused_by":{"type":"access_control_exception","reason":"access denied (\"java.lang.RuntimePermission\" \"getClassLoader\")"}}}},"status":400}]
> at __randomizedtesting.SeedInfo.seed([DB93397128B876D4:53C706AB86441B2C]:0)
> at org.elasticsearch.test.rest.section.DoSection.execute(DoSection.java:107)
> at org.elasticsearch.test.rest.ESRestTestCase.test(ESRestTestCase.java:395)
> at java.lang.Thread.run(Thread.java:745)
```
Related to #16864
Internally the put pipeline API uses this information in node info API to validate if all specified processors in a pipeline exist on all nodes in the cluster.
Closes#16964
Squashed commit of the following:
commit a23f9d2d29220991aa498214530753d7a5a148c6
Merge: eec9c4e 0b0a251
Author: Robert Muir <rmuir@apache.org>
Date: Mon Mar 7 04:12:02 2016 -0500
Merge branch 'master' into lucene6
commit eec9c4e5cd11e9c3e0b426f04894bb2a6dae4f21
Merge: bc67205 675d940
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 13:45:00 2016 -0500
Merge branch 'master' into lucene6
commit bc67205bdfe1526eae277ab7856fc050ecbdb7b2
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 09:56:31 2016 -0500
fix test bug
commit a60723b007ff12d97b1810cef473bd7b553a0327
Author: Simon Willnauer <simonw@apache.org>
Date: Fri Mar 4 15:35:35 2016 +0100
Fix SimpleValidateQueryIT to put braces around boosted terms
commit ae3a49d7ba7ced448d2a5262e5d8ec98671a9090
Author: Simon Willnauer <simonw@apache.org>
Date: Fri Mar 4 15:27:25 2016 +0100
fix multimatchquery
commit ae23fdb88a8f6d3fb7ba60fd1aaf3fd72d899aa5
Author: Simon Willnauer <simonw@apache.org>
Date: Fri Mar 4 15:20:49 2016 +0100
Rewrite DecayFunctionScoreIT to be independent of the similarity used
This test relied a lot on the term scoring and compared scores
that are dependent on the similarity. This commit changes the base query
to be a predictable constant score query.
commit 366c2d518c35d31251033f1b6f6a93f6e2ae327d
Author: Simon Willnauer <simonw@apache.org>
Date: Fri Mar 4 14:06:14 2016 +0100
Fix scoring in tests due to changes to idf calculation.
Lucene 6 uses a different default similarity as well as a different
way to calculate IDF. In contrast to older version lucene 6 uses docCount per field
to calculate the IDF not the # of docs in the index to overcome the sparse field
cases.
commit dac99fd64ac2fa71b8d8d106fe68825e574c49f8
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 08:21:57 2016 -0500
don't hardcoded expected termquery score
commit 6e9f340ba49ab10eed512df86d52a121aa775b0f
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 08:04:45 2016 -0500
suppress deprecation warning until migrated to points
commit 3ac8908424b3fdad44a90a4f7bdb3eff7efd077d
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 07:21:43 2016 -0500
Remove invalid test: all commits have IDs, and its illegal to do this.
commit c12976288124ad1a26467e7e848fb810548e7eab
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 07:06:14 2016 -0500
don't test with unsupported back compat
commit 18bbfe76128570bc70883bf91ff4c44c82d27817
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 07:02:18 2016 -0500
remove now invalid lucene 4 backcompat test
commit 7e730e572886f0ef2d3faba712e4256216ff01ec
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 06:58:52 2016 -0500
remove now invalid lucene 4 backwards test
commit 244d2ab6868ba5ac9e0bcde3c2833743751a25ec
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 06:47:23 2016 -0500
use 6.0 codec
commit 5f64d4a431a6fdaa1234adca23f154c2a1de8284
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 06:43:08 2016 -0500
compile, javadocs, forbidden-apis, etc
commit 1f273cd62a7fe9ca8f8944acbbfc5cbdd3d81ccb
Merge: cd33921 29e3443
Author: Simon Willnauer <simonw@apache.org>
Date: Fri Mar 4 10:45:29 2016 +0100
Merge branch 'master' into lucene6
commit cd33921ac742ef9fb351012eff35f3c7dbda7264
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:58:37 2016 -0500
fix hunspell dictionary loading
commit c7fdbd837b01f7defe9cb1c24e2ec65604b0dc96
Merge: 4d4190f d8948ba
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:41:53 2016 -0500
Merge branch 'master' into lucene6
commit 4d4190fd82601aaafac6b8254ccb3edf218faa34
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:39:14 2016 -0500
remove nocommit
commit 77ca69e288b1a41aa9595c921ed166c272a00ea8
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:38:24 2016 -0500
clean up numericutils vs legacynumericutils
commit a466d696fbaad04b647ffbc0857a9439b583d0bf
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:32:43 2016 -0500
upgrade spatial4j
commit 5412c747a8cfe638bacedbc8233163cb75cc3dc5
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:19:28 2016 -0500
move to 6.0.0-snapshot-8eada27
commit b32bfe924626b87e540692375ece09e7c2edb189
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 11:30:09 2016 +0100
Fix some test compile errors.
commit 6ccde35e9840b03c68d1a2cd47c7923a06edf64a
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 11:25:51 2016 +0100
Current Lucene version is 6.0.0.
commit f62e1015d931b4cc04c778298a8fa1ba65e97ad9
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 11:20:48 2016 +0100
Fix compile errors in NGramTokenFilterFactory.
commit 6837c6eabf96075f743649da9b9b52dd39611c58
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 10:50:59 2016 +0100
Fix the edge ngram tokenizer/filter.
commit ccd7f070de5efcdfbeb34b9555c65c4990bf1ba6
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 10:42:44 2016 +0100
The missing value is now accessible through a getter.
commit bd3b77f9b28e5b05daa3d49683a9922a6baf2963
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 10:41:51 2016 +0100
Remove IndexCacheableQuery.
commit 05f3091c347aeae80eeb16349ac51d2b53cf86f7
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 10:39:43 2016 +0100
Fix compilation of function_score queries.
commit 81cda79a2431ac78f56b0cc5a5765387f662d801
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 10:35:02 2016 +0100
Fix compile errors in BlendedTermQuery.
commit 70994ce8dd1eca0b995870974a38e20f26f96a7b
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 23:33:03 2016 -0500
add bug ID
commit 29d4f1a71f36f646b5a6060bed3db019564a279d
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 21:02:32 2016 -0500
easy .store changes
commit 5e1a1e6fd665fa455e88d3a8987362fad5f44bb1
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 20:47:24 2016 -0500
cleanups mostly around boosting
commit 333a669ec6c305ada5645d13ed1da0e19ec1d053
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 20:27:56 2016 -0500
more simple fixes
commit bd5cd98a1e089c866b6b4a5e159400b110140ce6
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 19:49:38 2016 -0500
more easy fixes and removal of ancient cruft
commit a68f419ee47da5f9c9ce5b372f01d707e902474c
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 19:35:02 2016 -0500
cutover numerics
commit 4ca5dc1fa47dd5892db00899032133318fff3116
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 18:34:18 2016 -0500
fix some constants
commit 88710a17817086e477c6c021ec346d0534b7fb88
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 18:14:25 2016 -0500
Add spatial-extras jar as a core dependency
commit c8cd6726583e5ce3f546ed355d4eca037164a30d
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 18:03:33 2016 -0500
update to lucene 6 jars
Elasticsearch 5.0 doesn't support indices wiht legacy checksums anymore.
The last time we write legacy checksums was in 1.3.0 which was based
on lucene 4.9 already which means that all files have CRC32 checksums.
All indices that Elasticsearch can read today must be written with
lucene version >= 4.8 anyway so we can drop this layer of backwards
compatibility entirely.
Since we are close to upgrading to Lucene 6.0 we should get rid of this
in a more contiained change than the lucene upgrade.
This commit removes the ability to use string fields on indices created on or
after 5.0. Dynamic mappings now generate text fields by default for strings
but there are plans to also add a sub keyword field (in a future PR).
Most of the changes in this commit are just about replacing string with
keyword or text. Some tests have been removed because they existed because of
corner cases of string mappings like setting ignore-above on a text field or
enabling term vectors on a keyword field which are now impossible.
The plan is to remove strings entirely in 6.0.
Add setFactory permission to GceDiscoveryPlugin
This commit adds a missing permission and a simple test that
ensures we discover other nodes via a mock http endpoint.
Closes#16485
The big win here is catching tests that are incorrectly named and will
be skipped by gradle, providing a false sense of security.
The whole thing takes about 10 seconds on my Macbook Air, not counting
compiling the test classes, which seems worth it. Because this runs as
a gradle task with propery UP-TO-DATE handling it can be skipped if the
tests haven't been changed which should save some time.
I chose to keep this in test:framework rather than a new subproject of
buildSrc because ESIntegTestCase and doesn't inroduce any additional
dependencies.
DiscoveryService was a bridge into the discovery universe. This is unneeded and we can just access discovery directly or do things in a different way.
One of those different ways, is not having a dedicated discovery implementation for each our dicovery plugins but rather reuse ZenDiscovery.
UnicastHostProviders are now classified by discovery type, removing unneeded checks on plugins.
Closes#16821
We are using `2.0.0` today but Azure team now recommends:
```xml
<dependency>
<groupId>com.microsoft.azure</groupId>
<artifactId>azure-storage</artifactId>
<version>4.0.0</version>
</dependency>
```
This new version fix the timeout issues we have seen with azure storage although #15080 adds a timeout support.
Azure storage client 2.0.0 was not passing correctly this value when it was calling Azure services.
Note that the timeout is a server side timeout and not client side timeout.
It means that it will raise only a timeout when:
* upload of blob is complete
* if azure service is not able to process the blob (and store it) within a given time range.
In which case it will raise an exception which elasticsearch can deal with:
```
java.io.IOException
at __randomizedtesting.SeedInfo.seed([91BC11AEF16E073F:6886FA5308FCE4D8]:0)
at com.microsoft.azure.storage.core.Utility.initIOException(Utility.java:643)
at com.microsoft.azure.storage.blob.BlobOutputStream.writeBlock(BlobOutputStream.java:444)
at com.microsoft.azure.storage.blob.BlobOutputStream.access$000(BlobOutputStream.java:53)
at com.microsoft.azure.storage.blob.BlobOutputStream$1.call(BlobOutputStream.java:388)
at com.microsoft.azure.storage.blob.BlobOutputStream$1.call(BlobOutputStream.java:385)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
Caused by: com.microsoft.azure.storage.StorageException: Operation could not be completed within the specified time.
at com.microsoft.azure.storage.StorageException.translateException(StorageException.java:89)
at com.microsoft.azure.storage.core.StorageRequest.materializeException(StorageRequest.java:305)
at com.microsoft.azure.storage.core.ExecutionEngine.executeWithRetry(ExecutionEngine.java:175)
at com.microsoft.azure.storage.blob.CloudBlockBlob.uploadBlockInternal(CloudBlockBlob.java:1006)
at com.microsoft.azure.storage.blob.CloudBlockBlob.uploadBlock(CloudBlockBlob.java:978)
at com.microsoft.azure.storage.blob.BlobOutputStream.writeBlock(BlobOutputStream.java:438)
... 9 more
```
The following code was used to test this against Azure platform:
```java
public void testDumb() throws URISyntaxException, StorageException, IOException, InvalidKeyException {
String connectionString = "MY-AZURE-STRING";
CloudStorageAccount storageAccount = CloudStorageAccount.parse(connectionString);
CloudBlobClient client = storageAccount.createCloudBlobClient();
client.getDefaultRequestOptions().setTimeoutIntervalInMs(1000);
CloudBlobContainer container = client.getContainerReference("dumb");
container.createIfNotExists();
CloudBlockBlob blob = container.getBlockBlobReference("blob");
File sourceFile = File.createTempFile("sourceFile", ".tmp");
try {
int fileSize = 10000000;
byte[] buffer = new byte[fileSize];
Random random = new Random();
random.nextBytes(buffer);
logger.info("Generate local file");
FileOutputStream fos = new FileOutputStream(sourceFile);
fos.write(buffer);
fos.close();
logger.info("End generate local file");
FileInputStream fis = new FileInputStream(sourceFile);
logger.info("Start uploading");
blob.upload(fis, fileSize);
logger.info("End uploading");
}
finally {
if (sourceFile.exists()) {
sourceFile.delete();
}
}
}
```
With 2.0.0, the above code was not raising any exception. With 4.0.0, the exception is now thrown correctly.
The default timeout is 5 minutes. See https://github.com/Azure/azure-storage-java/blob/master/microsoft-azure-storage/src/com/microsoft/azure/storage/core/Utility.java#L352-L375Closes#12567.
Release notes from 2.0.0:
* Removed deprecated table AtomPub support.
* Removed deprecated constructors which take service clients in favor of constructors which take credentials.
* Added support for "Add" permissions on Blob SAS.
* Added support for "Create" permissions on Blob and File SAS.
* Added support for IP Restricted SAS and Protocol SAS.
* Added support for Account SAS to all services.
* Added support for Minute and Hour Metrics to FileServiceProperties and added support for File Metrics to CloudAnalyticsClient.
* Removed deprecated startCopyFromBlob() on CloudBlob. Use startCopy() instead.
* Removed deprecated Credentials and StorageKey classes. Please use the appropriate methods on StorageCredentialsAccountAndKey instead.
* Fixed a bug in table where a select on a non-existent field resulted in a null reference exception if the corresponding field in the TableEntity was not nullable.
* Fixed a bug in table where JsonParser was automatically closing the response stream before it was completely drained causing socket exhaustion.
* Fixed a bug in StorageCredentialsAccountAndKey.updateKey(String) which prevented valid keys from being set.
* Added CloudBlobContainer.listBlobs(final String, final boolean) method.
* Fixed a bug in blob where using AccessConditions on block blob uploads larger than 64MB done with the upload* methods or block blob uploads done openOutputStream with would fail if the blob did not already exist.
* Added support for setting a proxy per request. Proxy can be set on an OperationContext instance and will be used when that instance is passed to the request method.
* Added support for SAS to the Azure File service.
* Added support for Append Blob.
* Added support for Access Control Lists (ACL) to File Shares.
* Added support for getting and setting of CORS rules to File service.
* Added support for ShareStats to File Shares.
* Added support for copying an Azure File to another Azure File or a Block Blob asynchronously, and aborting Azure File copy operations asynchronously.
* Added support for copying a Blob to an Azure File asynchronously.
* Added support for setting a maximum quota property on a File Share.
* Removed deprecated AuthenticationScheme and its getter and setter. In the future only SharedKey will be used.
* Removed deprecated getter/setters for all request option properties on the service clients. Please use the default request options getter/setters instead.
* Removed getSubDirectoryReference() for blob directories and file directories. Use getDirectoryReference() instead.
* Removed getEntityClass() in TableQuery. Please use getClazzType() instead.
* Added client-side verification for lease duration and break periods.
* Deprecated the setters in table for timestamp as this property is only modifiable by the service.
* Deprecated startCopyFromBlob() on CloudBlob. Use startCopy() instead.
* Deprecated the Credentials and StorageKey classes. Please use the appropriate methods on StorageCredentialsAccountAndKey instead.
* Deprecated constructors which take service clients in favor of constructors which take credentials.
* Fixed a bug where the DateBackwardCompatibility flag was not applied if set on the CloudTableClient default request options.
* Changed library behavior to retry all exceptions thrown when parsing a response object.
* Changed behavior to stop removing query parameters passed in with the resource URI if that URI contains a SAS token. Some query parameters such as comp, restype, snapshot and api-version will still be removed.
* Added support for logging StringToSign to SharedKey and SAS.
* **Added a connect timeout to prevent hangs when establishing the network connection.**
* **Made performance enhancements to the BlobOutputStream class.**
* Fixed a bug where maximum execution time was ignored for file, queue, and table services.
* **Changed the socket timeout to be set to the service side timeout plus 5 minutes when maximum execution time is not set.**
* **Changed the socket timeout to default to 5 minutes rather than infinite when neither service side timeout or maximum execution time are set.**
* Fixed a bug where MD5 was calculated for commitBlockList even though UseTransactionalMD5 was set to false.
* Fixed a bug where selecting fields that did not exist returned an error rather than an EntityProperty with a null value.
* Fixed a bug where table entities with a single quote in their partition or row key could be inserted but not operated on in any other way.
* Fixed a bug for all listing API's where next() would sometimes throw an exception if hasNext() had not been called even if there were more elements to iterate on.
* Added sequence number to the blob properties. This is populated for page blobs.
* Creating a page blob sets its length property.
* Added support for page blob sequence numbers and sequence number access conditions.
* Fixed a bug in abort copy where the lease access condition was not sent to the service.
* Fixed an issue in startCopyFromBlob where if the URI of the source blob contained certain non-ASCII characters they would not be encoded appropriately. This would result in Authorization failures.
* Fixed a small performance issue in XML serialization.
* Fixed a bug in BlobOutputStream and FileOutputStream where flush added data to a request pool rather than immediately committing it to the Azure service.
* Refactored to remove the blob, queue, and file package dependency on table in the error handling code.
* Added additional client-side logging for REST requests, responses, and errors.
Closes#15976.
Instead of modifying methods each time we need to add a new behavior for settings, we can simply pass `SettingsProperty... properties` instead.
`SettingsProperty` could be defined then:
```
public enum SettingsProperty {
Filtered,
Dynamic,
ClusterScope,
NodeScope,
IndexScope
// HereGoesYours;
}
```
Then in setting code, it become much more flexible.
TODO: Note that we need to validate SettingsProperty which are added to a Setting as some of them might be mutually exclusive.
Removes all our logger wrappers except the wrapper for log4j1.2. If you
depend on Elasticsearch's jar in your application you'll need to declare
log4j 1.2 and/or some bridge to your favorite logger.
We did this to simplify our builds and code. No more commons-logging like
log implementation sniffing. No more optional dependency hacks in gradle.
We might one day want to use j.u.l instead of log4j. If we do want that
we can recover its wrapper by studying this commit. We didn't go directly
to j.u.l in this commit because that is a bigger change. Our logging
configuration is based on log4j1.2 and people are used to it. So it'd
be a much more fraught breaking change to do that conversion.
Now we have a nice Setting infra, we can define in Setting class if a setting should be filtered or not.
So when we register a setting, setting filtering would be automatically done.
Instead of writing:
```java
Setting<String> KEY_SETTING = Setting.simpleString("cloud.aws.access_key", false, Setting.Scope.CLUSTER);
settingsModule.registerSetting(AwsEc2Service.KEY_SETTING, false);
settingsModule.registerSettingsFilterIfMissing(AwsEc2Service.KEY_SETTING.getKey());
```
We could simply write:
```java
Setting<String> KEY_SETTING = Setting.simpleString("cloud.aws.access_key", false, Setting.Scope.CLUSTER, true);
settingsModule.registerSettingsFilterIfMissing(AwsEc2Service.KEY_SETTING.getKey());
```
It also removes `settingsModule.registerSettingsFilterIfMissing` method.
The plan would be to remove as well `settingsModule.registerSettingsFilter` method but it still used with wildcards. For example in Azure Repository plugin:
```java
module.registerSettingsFilter(AzureStorageService.Storage.PREFIX + "*.account");
module.registerSettingsFilter(AzureStorageService.Storage.PREFIX + "*.key");
```
Closes#16598.
This is a simple port of the mapper attachment plugin to the ingest
functionality, no new features. The only option is to limit
the number of chars to prevent indexing of huge documents.
Fields can be selected in the processor as well.
Close#16303
Groovy uses reflection to invoke closures. These reflective calls are optimized by the JVM after "sun.reflect.inflationThreshold" number of invocations.
After inflation, access to sun.reflect.MethodAccessorImpl is required from the security manager.
Closes#16536
IndexShard currently holds an arbitraritly used `getQueryShardContext` that comes
out of a ThreadLocal. It's usage is undefined and arbitraty since there is also
such a method with different semantics on `IndexService` This commit removes the threadLocal on
IndexShard as well as on the context itself. It's types are now a member and the QueryShardContext
lifecycle is managed byt SearchContext which passes the types on from the SearchRequest.
* Minor clean up of Writer constants.
* Removed synthetic attribute from the generated constructor and method.
* Added a safeguard for maximum script length.
Closes#16457
This processor is useful when all elements of a json array need to be processed in the same way.
This avoids that a processor needs to be defined for each element in an array.
Also it is very likely that it is unknown how many elements are inside an json array.
This change rewrites the entire settings filtering mechanism to be immutable.
All filters must be registered up-front in the SettingsModule. Filters that are comma-sparated are
not allowed anymore and check on registration.
This commit also adds settings filtering to the default settings recently added to ensure we don't render
filtered settings.
Also removes ensureCanWrite since this already passes the
TRUNCATE_EXISTING flag when opening.
Adds a REST test that fails without this fix due to the classloader
isolation.
Additionally, move SmbDirectoryWrapper into an elasticsearch package instead of a lucene one, so this would be found at compile time instead of runtime.
Forward-port of #16383
Renamed `ingest-with-mustache` to `smoke-test-ingest-with-all-dependencies`
Also renamed `ingest-disabled` to `smoke-test-ingest-disabled` so that the name is more inline with other qa smoke test modules.
This commit enableds strict settings validation on node startup. All settings
passed to elasticsearch either through system properties, yaml files or any other
way to pass settings must be registered and valid. Settings that are unknown ie. due to
typos or due to deprecation or removal will cause the node to NOT start up. Plugins
have to declare all their settings on the `SettingsModule#registerSetting` and settings for
plugins that are not installed must be removed.
This commit also removes the ability to specify the nodes name via `-Des.name` or just `name` in the
configuration files. The node name must be prefixed with the node prexif like `node.name: Boom`. Left over
usage of `name` will also cause startup to fail.
Cli tools currently catch all exceptions, and only print the exception
message, except when a special system property is set. Even with this
flag set, certain exceptions, like IOException, are captured and their
stack trace is always lost.
This change adds a UserError class, which can be used a cli tools to
specify a message to the user, as well as an exit status. All other
exceptions are propagated out of main, so java will exit with non-zero
and print the stack trace.
This commit removes and forbids the use of lowercase ells ('l') in long
literals because they are often hard to distinguish from the digit
representing one ('1').
Closes#16329
When there is an exception thrown during pipeline creation within
Rest calls (in put pipeline, and simulate) We now return a structured
error response to the user with details around which processor's
configuration is the cause of the issue, or which configuration property
is misconfigured, etc.
In the early days Elasticsearch used to use the index name as the index identity. Around 1.0.0 we introduced a unique index uuid which is stored in the index setting. Since then we used that uuid in a few places but it is by far not the main identifier when working with indices, partially because it's not always readily available in all places.
This PR start to make a move in the direction of using uuids instead of name by making sure that the uuid is available on the Index class (currently just a wrapper around the name) and as such also available via ShardRouting and ShardId.
Note that this is by no means an attempt to do the right thing with the uuid in all places. In almost all places it falls back to the name based comparison that was done before. It is meant as a first step towards slowly improving the situation.
Closes#16217
This commit method renames the ScriptEngineService interface methods
types, extensions, and sandboxed to getTypes, getExtensions, and
isSandboxed, respectively.
This commit converts the script mode settings to the new settings
infrastructure. This is a major refactoring of the handling of script
mode settings. This refactoring is necessary because these settings are
determined at runtime based on the registered script engines and the
registered script contexts.
Parsing is currently very lenient, which has the bad side-effect that if you
have a typo and pass eg. `store: fasle` this will actually be interpreted as
`store: true`. Since mappings can't be changed after the fact, it is quite bad
if it happens on an index that already contains data.
Note that this does not cover all settings that accept a boolean, but since the
PR was quite hard to build and already covers some main settirgs like `store`
or `doc_values` this would already be a good incremental improvement.
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
New Features:
Exceptions (throw, try/catch)
Infinite Loop Checking
Iterators added to the API
Fixes:
Improved loop path analysis
Fixed set/add issue with shortcuts in lists
Fixed minor promotion issue with incorrect type
Fixed score issue related to score extending Number
Documentation:
Added JavaDocs for some files
One test we forgot in #14843 and #13779 is the default client selection.
Most of the time, users won't define explicitly which client they want to use because they are providing only one connection to Azure storage:
```yml
cloud:
azure:
storage:
my_account:
account: your_azure_storage_account
key: your_azure_storage_key
```
Then using the default client like this:
```sh
# This one will use the default account (my_account1)
curl -XPUT localhost:9200/_snapshot/my_backup1?pretty -d '{
"type": "azure"
}'
```
This commit adds tests to check that the right client is still selected when no client is explicitly set when creating the snapshot.
This commit replaces server side timeout (which is BTW not correctly implemented in azure client 2.0.0 but fixed later #16084) with a client side timeout.
As a consequence, for each request sent to azure, azure client will raise an exception after a given amount of time (timeout).
Closes#12567
The rest test framework, because it used to be tightly integrated with
ESIntegTestCase, currently expects the addresses for the test cluster to
be passed using the transport protocol port. However, it only uses this
to then find the http address.
This change makes ESRestTestCase extend from ESTestCase instead of
ESIntegTestCase, and changes the sysprop used to tests.rest.cluster,
which now takes the http address.
closes#15459
Removes all Xlint skips in lang-plan-a. Warnings were just some extra
casts which were removed, some raw types which we just needed to <?>, and
a couple of unchecked casts in data that we know to be Map<String, Object>
because that structure is super-ultra-common in scripts.
This would be useful in order to only perform some validations in the case of
a mapping update and in cases when a mapping is restored eg. after a restart,
such as discussed in #15989.
This replaces the current `applyDefault` parameter which can be derived from
the mapping merge reason: the default mapping should be applied only in case of
a mapping update, if the mapping does not exist yet and if this is not the
default mapping.
Site plugins used to be used for things like kibana and marvel, but
there is no longer a need since kibana (and marvel as a kibana plugin)
uses node.js. This change removes site plugins, as well as the flag for
jvm plugins. Now all plugins are jvm plugins.
the environment is now available through NodeModule#getNode#getEnvironment and can be retrieved during onModule(NodeModule), no need for this indirection anymore using the BiFunction
* Folded IngestModule into NodeModule
* Renamed IngestBootstrapper to IngestService
* Let NodeService construct IngestService and removed the Guice annotations
* Let IngestService implement Closable
Using a single azure account is now rejected.
This commit fixes this issue and adds a test for it.
This regression was introduced with #13779. Hopefully no elasticsearch version has been released since then.
Needs to be merged in 2.2, 2.x and master branches.
ContextAndHeaders has a massive impact on the core infrastructure since it has to
be manually passed on to all relevant places across threads/network calls etc. For the same reason
it's also very error prone and easily forgotten on potentially relevant APIs.
The new ThreadContext is associated with a ThreadPool (node or transport client) and ensures that
headers and context registered on a current thread are inherited to new threads spawned, send across
the network to be deserialized on the receiver end as well as restored on the response handling thread
once the response is received.
1. Uses forbidden patterns to prevent things from referencing
java.io.Serializable or from mentioning serialVersionUID.
2. Uses -Xlint:-serial so we don't have to hear from javac that we aren't
declaring serialVersionUID on any classes that we make that happen to extend
Serializable.
3. Remove Serializable and serialVersionUID declarations.
I didn't use forbidden apis because it doesn't look like it has a way to ban
explicitly implementing Serializable. If you try to ban Serializable with
forbidden apis you end up banning all Exceptions and all Strings.
Closes#15847
This commit removes and now forbids all uses of
java.util.concurrent.ThreadLocalRandom across the codebase. The
underlying issue with ThreadLocalRandom is that it can not be
seeded. This means that if ThreadLocalRandom is used in production code,
then tests that cover any code path containing ThreadLocalRandom will be
prevented from being reproducible by use of ThreadLocalRandom. Instead,
using org.elasticsearch.common.random.Randomness#get will give
reproducible sources of random when running under tests and otherwise
still give an instance of ThreadLocalRandom when running as production
code.
CRUD and simulate apis work now fine, every node has the pipelines in memory, but node.ingest disables ingestion, meaning that any index or bulk request with a pipeline id is going to fail
Right now we define the same sort of methods as taking String arrays and
string varargs. We should standardize on one and varargs is easier to
call so lets use varargs!
We will keep this abstractions as it's convenient, otherwise IngestDocument would depend on ScriptService directly, and would explicitly rely on mustache which is not even part of core. better to have the interface in core, and the impl as part of the ingest plugin, which relies on mustache, shipped with core by default.
* Added percolator field mapper that extracts the query terms and indexes these terms with the percolator query.
* At percolate time these extracted terms are used to query percolator queries that are like to be evaluated. This can significantly cut down the time it takes to percolate. Whereas before all percolator queries were evaluated if they matches with the document being percolated.
* Changes made to percolator queries are no longer immediately visible, a refresh needs to happen before the changes are visible.
* By default the percolate api only returns upto 10 matches instead of returning all matching percolator queries.
* Made percolate more modular, so that it is easier to add unit tests.
* Added unit tests for the percolator.
Closes#12664Closes#13646
Adds task manager class and enables all activities to register with the task manager. Currently, the immutable Transport*Activity class represents activity itself shared across all requests. This PR adds and an additional structure Task that keeps track of currently running requests and can be used to communicate with these requests using TransportTaskAction.
Related to #15117
By default, azure does not timeout. This commit adds support for a timeout settings which defaults to 5 minutes.
It's a timeout **per request** not a global timeout for a snapshot request.
It can be defined globally, per account or both. Defaults to `5m`.
```yml
cloud:
azure:
storage:
timeout: 10s
my_account1:
account: your_azure_storage_account1
key: your_azure_storage_key1
default: true
my_account2:
account: your_azure_storage_account2
key: your_azure_storage_key2
timeout: 30s
```
In this example, timeout will be 10s for `my_account1` and 30s for `my_account2`.
Closes#14277.
All those repository settings can also be defined globally in `elasticsearch.yml` file using prefix `repositories.azure.`. For example:
```yml
repositories.azure:
container: backup-container
base_path: backups
chunk_size: 32m
compress": true
```
Closes#13776.
An index template for the '.ingest' index is required because:
* We don't want arbitrary fields in pipeline documents, because that can turn into upgrade problems if we add more properties to the pipeline dsl.
* We know what are the usages are of the '.ingest' index, so we can optimize for that and prevent that this index is used for different purposes.
Closes#15001
This removes the backward compatibility layer with pre-2.0 indices, notably
the extraction of _id, _routing or _timestamp from the source document when a
path is defined.
This changes a couple of things:
Mappings are truly immutable. Before, each field mapper stored a
MappedFieldTypeReference that was shared across fields that have the same name
across types. This means that a mapping update could have the side-effect of
changing the field type in other types when updateAllTypes is true. This works
differently now: after a mapping update, a new copy of the mappings is created
in such a way that fields across different types have the same MappedFieldType.
See the new Mapper.updateFieldType API which replaces MappedFieldTypeReference.
DocumentMapper is now immutable and MapperService.merge has been refactored in
such a way that if an exception is thrown while eg. lookup structures are being
updated, then the whole mapping update will be aborted. As a consequence,
FieldTypeLookup's checkCompatibility has been folded into copyAndAddAll.
Synchronization was simplified: given that mappings are truly immutable, we
don't need the read/write lock so that no documents can be parsed while a
mapping update is being processed. Document parsing is not performed under a
lock anymore, and mapping merging uses a simple synchronized block.
This adds the required changes/checks so that the build can run on
FreeBSD.
There are a few things that differ between FreeBSD and Linux:
- CPU probes return -1 for CPU usage
- `hot_threads` cannot be supported on FreeBSD
From OpenJDK's `os_bsd.cpp`:
```c++
bool os::is_thread_cpu_time_supported() {
#ifdef __APPLE__
return true;
#else
return false;
#endif
}
```
So this API now returns (for each FreeBSD node):
```
curl -s localhost:9200/_nodes/hot_threads
::: {Devil Hunter Gabriel}{q8OJnKCcQS6EB9fygU4R4g}{127.0.0.1}{127.0.0.1:9300}
hot_threads is not supported on FreeBSD
```
- multicast fails in native `join` method - known bug:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=193246
Which causes:
```
1> Caused by: java.net.SocketException: Invalid argument
1> at java.net.PlainDatagramSocketImpl.join(Native Method)
1> at java.net.AbstractPlainDatagramSocketImpl.join(AbstractPlainDatagramSocketImpl.java:179)
1> at java.net.MulticastSocket.joinGroup(MulticastSocket.java:323)
1> at org.elasticsearch.plugin.discovery.multicast.MulticastChannel$Plain.buildMulticastSocket(MulticastChannel.java:309)
```
So these tests are skipped on FreeBSD.
Resolves#15562
both processors and pipelines now have the ability to define
a separate list of processors to be executed if the original line
of execution throws an Exception.
processors without an on_failure parameter defined will throw an
exception and exit the pipeline immediately. processors with on_failure
defined will catch the exception and allow for further processors to
run. Exceptions within the on_failure block will be treated the same as
the top-level.
The append processor allows to append one or more values to an existing list; add a new list with the provided values if the field doesn't exist yet, or convert an existing scalar into a list and add the provided values to the newly created list.
This required adapting of IngestDocument#appendFieldValue behaviour, also added support for templating to it.
Closes#14324
DocumentMapperParser has both parse and parseCompressed methods. Except that the
parse methods are ONLY used from the unit tests. This commit removes the parse
method and moves all tests to parseCompressed so that they test more
realistically how mappings are managed.
Then I renamed parseCompressed to parse given that this is the only alternative
anyway.
This change adds a Fixture class for use by gradle. A Fixture is an
external process that integration tests will use. It can be added as a
dependsOn for integTest, and will automatically be shutdown upon success
or failure, as well as relevant information dumped on failure. There is
also an example fixture in this change.
* Pipeline store can now only start when there is no .ingest index or all primary shards of .ingest have been started
* IngestPlugin adds`node.ingest` setting to `true`. This is used to figure out to what nodes to send the refresh request too. This setting isn't yet configurable. This will be done in a follow up issue.
* Removed the background pipeline updater and added added logic to deal with specific scenarious to reload all pipelines.
* Ingest services are no longer be managed by Guice. Only the bootstrapper gets managed by guice and that contructs
all the services/components ingest will need.
Added ingest wide template infrastructure to IngestDocument
Added a TemplateService interface that the ingest framework uses
Added a TemplateService implementation that the ingest plugin provides that delegates to the ES' script service
Cut SetProcessor over to use the template infrastructure for the `field` and `value` settings.
Removed the MetaDataProcessor
Removed dependency on mustache library
Added qa ingest mustache rest test so that the ingest and mustache integration can be tested.
We have the Text API, which is essentially a wrapper around a String and a
BytesReference and then we have 3 implementations depending on whether the
String view should be cached, the BytesReference view should be cached, or both
should be cached.
This commit merges everything into a single Text that is essentially the old
StringAndBytesText impl.
Long term we should look into whether this API has any performance benefit or
if we could just use plain strings. This would greatly simplify all our other
APIs that currently use Text.
This fixes the `lenient` parameter to be `missingClasses`. I will remove this boolean and we can handle them via the normal whitelist.
It also adds a check for sheisty classes (jar hell with the jdk).
This is inspired by the lucene "sheisty" classes check, but it has false positives. This check is more evil, it validates every class file against the extension classloader as a resource, to see if it exists there. If so: jar hell.
This jar hell is a problem for several reasons:
1. causes insanely-hard-to-debug problems (like bugs in forbidden-apis)
2. hides problems (like internal api access)
3. the code you think is executing, is not really executing
4. security permissions are not what you think they are
5. brings in unnecessary dependencies
6. its jar hell
The more difficult problems are stuff like jython, where these classes are simply 'uberjared' directly in, so you cant just fix them by removing a bogus dependency. And there is a legit reason for them to do that, they want to support java 1.4.
When creating a metadata mapper for a new type, we reuse an existing
configuration from an existing type (if any) in order to avoid introducing
conflicts. However this field type that is provided is considered as both an
initial configuration and the default configuration. So at serialization time,
we might only serialize the difference between the current configuration and
this default configuration, which might be different to what is actually
considered the default configuration.
This does not cause bugs today because metadata mappers usually override the
toXContent method and compare the current field type with Defaults.FIELD_TYPE
instead of defaultFieldType() but I would still like to do this change to
avoid future bugs.
The `path` option allowed to index/store a field `a.b.c` under just `c` when
set to `just_name`. This "feature" has been removed in 2.0 in favor of `copy_to`
so we can remove the back compat in 3.x.
Today mappings are mutable because of two APIs:
- Mapper.merge, which expects changes to be performed in-place
- IncludeInAll, which allows to change whether values should be put in the
`_all` field in place.
This commit changes both APIs to return a modified copy instead of modifying in
place so that mappings can be immutable. For now, only the type-level object is
immutable, but in the future we can imagine making them immutable at the
index-level so that mapping updates could be completely atomic at the index
level.
Close#9365
This change adds back the http.type setting. It also cleans up all the
transport related guice code to be consolidated within the
NetworkModule (as transport and http related stuff is what and how ES
exposes over the network). The setter methods previously used by some
plugins to override eg the TransportService or HttpServerTransport are
removed, and those plugins should now register a custom implementation
of the class with a name and set that using the appropriate config
setting. Note that I think ActionModule should also be moved into here,
to sit along side the rest actions, but I left that for a followup.
closes#14148
Migrated from ES-Hadoop. Contains several improvements regarding:
* Security
Takes advantage of the pluggable security in ES 2.2 and uses that in order
to grant the necessary permissions to the Hadoop libs. It relies on a
dedicated DomainCombiner to grant permissions only when needed only to the
libraries installed in the plugin folder
Add security checks for SpecialPermission/scripting and provides out of
the box permissions for the latest Hadoop 1.x (1.2.1) and 2.x (2.7.1)
* Testing
Uses a customized Local FS to perform actual integration testing of the
Hadoop stack (and thus to make sure the proper permissions and ACC blocks
are in place) however without requiring extra permissions for testing.
If needed, a MiniDFS cluster is provided (though it requires extra
permissions to bind ports)
Provides a RestIT test
* Build system
Picks the build system used in ES (still Gradle)
This commit removes and now forbids all uses of
Collections#shuffle(List) and Random#<init>() across the codebase. The
rationale for removing and forbidding these methods is to increase test
reproducibility. As these methods use non-reproducible seeds, production
code and tests that rely on these methods contribute to
non-reproducbility of tests.
Instead of Collections#shuffle(List) the method
Collections#shuffle(List, Random) can be used. All that is required then
is a reproducible source of randomness. Consequently, the utility class
Randomness has been added to assist in creating reproducible sources of
randomness.
Instead of Random#<init>(), Random#<init>(long) with a reproducible seed
or the aforementioned Randomess class can be used.
Closes#15287
IndexResponse, DeleteResponse and UpdateResponse share some logic. This can be unified to a single DocWriteResponse base class. On top, some replication actions are now not about write operations anymore. This commit renames ActionWriteResponse to ReplicationResponse
Last some toXContent is moved from the Rest layer to the actual response classes, for more code re-sharing.
Closes#15334
Unify metadata map and source, add also support for _ingest prefix. Depending on the prefix, either _source, nothing or _ingest, we will figure out which map to use for values retrieval, but also modifications.
If one is using the ingest plugin and providing a pipeline id with the request, the chance that the source is going to be modified is 99%. We shouldn't worry about keeping track of whether something changed. That seemed useful at first so we can save the resources for setting back the source (map to bytes) when not needed. Also, we are trying to unify metadata fields and source in the same map and that is going to complicate how we keep track of changes that happen in the source only. Best solution is to remove the flag.
IngestDocument now holds an additional map of transient metadata. The only field that gets added automatically is `timestamp`, which contains the timestamp of ingestion in ISO8601 format. In the future it will be possible to eventually add or modify these fields, which will not get indexed, but they will be available via templates to all of the processors.
Transient metadata will be visualized by the simulate api, although they will never get indexed. Moved WriteableIngestDocument to the simulate package as it's only used by simulate and it's now modelled for that specific usecase.
Also taken the chance to remove one IngestDocument constructor used only for testing (accepting only a subset of es metadata fields). While doing that introduced some more randomizations to some existing processor tests.
Closes#15036
throw exception if a copy_to is within a multi field
Copy to within multi field is ignored from 2.0 on, see #10802.
Instead of just ignoring it, we should throw an exception if this
is found in the mapping when a mapping is added. For already
existing indices we should at least log a warning.
We remove the copy_to in any case.
related to #14946
This commit adds the infrastructure to make settings that are updateable
resetable and changes the application of updates to be transactional. This means
setting updates are either applied or not. If the application failes all values are rejected.
This initial commit converts all dynamic cluster settings to make use of the new infrastructure.
All cluster level dynamic settings are not resettable to their defaults or to the node level settings.
The infrastructure also allows to list default values and descriptions which is not fully implemented yet.
Values can be reset using a list of key or simple regular expressions. This has only been implemented on the java
layer yet. For instance to reset all recovery settings to their defaults a user can just specify `indices.recovery.*`.
This commit also adds strict settings validation, if a setting is unknown or if a setting can not be applied the entire
settings update request will fail.
When using S3 or EC2, it was possible to use a proxy to access EC2 or S3 API but username and password were not possible to be set.
This commit adds support for this. Also, to make all that consistent, proxy settings for both plugins have been renamed:
* from `cloud.aws.proxy_host` to `cloud.aws.proxy.host`
* from `cloud.aws.ec2.proxy_host` to `cloud.aws.ec2.proxy.host`
* from `cloud.aws.s3.proxy_host` to `cloud.aws.s3.proxy.host`
* from `cloud.aws.proxy_port` to `cloud.aws.proxy.port`
* from `cloud.aws.ec2.proxy_port` to `cloud.aws.ec2.proxy.port`
* from `cloud.aws.s3.proxy_port` to `cloud.aws.s3.proxy.port`
New settings are `proxy.username` and `proxy.password`.
```yml
cloud:
aws:
protocol: https
proxy:
host: proxy1.company.com
port: 8083
username: myself
password: theBestPasswordEver!
```
You can also set different proxies for `ec2` and `s3`:
```yml
cloud:
aws:
s3:
proxy:
host: proxy1.company.com
port: 8083
username: myself1
password: theBestPasswordEver1!
ec2:
proxy:
host: proxy2.company.com
port: 8083
username: myself2
password: theBestPasswordEver2!
```
Note that `password` is filtered with `SettingsFilter`.
We also fix a potential issue in S3 repository. We were supposed to accept key/secret either set under `cloud.aws` or `cloud.aws.s3` but the actual code never implemented that.
It was:
```java
account = settings.get("cloud.aws.access_key");
key = settings.get("cloud.aws.secret_key");
```
We replaced that by:
```java
String account = settings.get(CLOUD_S3.KEY, settings.get(CLOUD_AWS.KEY));
String key = settings.get(CLOUD_S3.SECRET, settings.get(CLOUD_AWS.SECRET));
```
Also, we extract all settings for S3 in `AwsS3Service` as it's already the case for `AwsEc2Service` class.
Closes#15268.
Since 2.2 we run all scripts with minimal privileges, similar to applets in your browser.
The problem is, they have unrestricted access to other things they can muck with (ES, JDK, whatever).
So they can still easily do tons of bad things
This PR restricts what classes scripts can load via the classloader mechanism, to make life more difficult.
The "standard" list was populated from the old list used for the groovy sandbox: though
a few more were needed for tests to pass (java.lang.String, java.util.Iterator, nothing scary there).
Additionally, each scripting engine typically needs permissions to some runtime stuff.
That is the downside of this "good old classloader" approach, but I like the transparency and simplicity,
and I don't want to waste my time with any feature provided by the engine itself for this, I don't trust them.
This is not perfect and the engines are not perfect but you gotta start somewhere. For expert users that
need to tweak the permissions, we already support that via the standard java security configuration files, the
specification is simple, supports wildcards, etc (though we do not use them ourselves).
Azure team released new versions of their Java SDK.
According to https://github.com/Azure/azure-sdk-for-java/wiki/Azure-SDK-for-Java-Features, it comes with 2 versions.
We should at least update to `0.9.0` of V1 but also consider moving to the new APIs (V2).
This commit first updates to latest API V1.
```xml
<dependency>
<groupId>com.microsoft.azure</groupId>
<artifactId>azure-svc-mgmt-compute</artifactId>
<version>0.9.0</version>
</dependency>
```
Closes#15209
Clinton Gormley
javanna
Boaz Leskes
Jason Tedor
Xu Zhang
Ryan Ernst
Nicolas Trésegnie
David Pilato
Simon Willnauer
Jun Ohtani
Yannick Welsch
Simon Willnauer
Areek Zillur
Adrien Grand
thefourtheye
Martijn van Groningen
Robert Muir
Lee Hinman
Daniel Mitterdorfer
Nik Everett
Sylwester Lachiewicz
Jack Conradson
Mike McCandless
Nicholas Knize
Alexander Reelsen
Yannick Welsch
Tal Levy
Tanguy Leroux
Robert Muir
Luca Cavanna
Igor Motov
Costin Leau
Britta Weber
