Remove CollectionChangeRecord as it was deprecated for removal in v4, use
IterableChangeRecord instead.
BREAKING CHANGE: CollectionChangeRecord has been removed, use IterableChangeRecord
instead
PR Close#38668
In several occasions it has been observed when the browser has evicted
eagerly cached assets from the cache and which can also not be found on the
server anymore. This can lead to broken state where only parts of the application
will load and others will fail.
This commit fixes this issue by checking for the missing asset in the cache
and on the server. If this condition is true, the broken client will be
notified about the current state through the `UnrecoverableStateError`.
Closes#36539
PR Close#36847
In general, the router only matches and loads a single Route config tree. However,
named outlets with empty paths are a special case where the router can
and should actually match two different `Route`s and ensure that the
modules are loaded for each match.
This change updates the "ApplyRedirects" stage to ensure that named
outlets with empty paths finish loading their configs before proceeding
to the next stage in the routing pipe. This is necessary because if the
named outlet has `loadChildren` but the associated lazy config is not loaded
before following stages attempt to match and activate relevant `Route`s,
an error will occur.
fixes#12842
PR Close#38379
This commit introduces a new subscription in the `routerLinkActive` directive which triggers an update
when any of its associated routerLinks have changes. `RouterLinkActive` not only needs to know when
links are added or removed, but it also needs to know about if a link it already knows about
changes in some way.
Quick note that `from...mergeAll` is used instead of just a simple
`merge` (or `scheduled...mergeAll`) to avoid introducing new rxjs
operators in order to keep bundle size down.
Fixes#18469
PR Close#38511
This commit introduces a new subscription in the `routerLinkActive` directive which triggers an update
when any of its associated routerLinks have changes. `RouterLinkActive` not only needs to know when
links are added or removed, but it also needs to know about if a link it already knows about
changes in some way.
Quick note that `from...mergeAll` is used instead of just a simple
`merge` (or `scheduled...mergeAll`) to avoid introducing new rxjs
operators in order to keep bundle size down.
Fixes#18469
PR Close#38349
Currently the Closure-related tests are not tree-shaking the dev-mode-only content, thus payload
size checks are failing even if dev-mode-only content is added.
The 2e9fdbde9e commit
added some logic to JIT compiler, which is likely triggered the payload size increase. This commit
updates the payload size limits for Closure-related test to get master and patch branches back to
the "green" state.
PR Close#38411
The compiler does not currently report errors when there's an `@Input()`
for a `private`, `protected`, or `readonly` directive/component class member.
This change adds an option to enable reporting errors when a template
attempts to bind to one of these restricted input fields.
PR Close#38249
This commit contains no changes to code. It only breaks `i18n.ts` file
into `i18n.ts` + `i18n_apply.ts` + `i18n_parse.ts` +
`i18n_postprocess.ts` for easier maintenance.
PR Close#38368
The currently selected ICU was incorrectly being stored it `TNode`
rather than in `LView`.
Remove: `TIcuContainerNode.activeCaseIndex`
Add: `LView[TIcu.currentCaseIndex]`
PR Close#38345
This commit performs minor refactoring in Forms package to get rid of duplicate functions.
It looks like the functions were duplicated due to a slightly different type signatures, but
their logic is completely identical. The logic in retained functions remains the same and now
these function also accept a generic type to achieve the same level of type safety.
PR Close#38371
This commit uses getElementById and getElementsByName when an anchor scroll happens,
to avoid escaping the anchor and wrapping the code in a try/catch block.
Related to #28960
PR Close#30143
This change provides better typing for the `LView.debug` property which
is intended to be used by humans while debugging the application with
`ngDevMode` turned on.
In addition this chang also adds jasmine matchers for better asserting
that `LView` is in the correct state.
PR Close#38359
I18n code breaks up internationalization into opCodes which are then stored
in arrays. To make it easier to debug the codebase this PR adds `debug`
property to the arrays which presents the data in human readable format.
PR Close#38154
Some specialised browsers that do not support scroll restoration
(e.g. some web crawlers) do not allow `scrollRestoration` to be
writable.
We already sniff the browser to see if it has the `window.scrollTo`
method, so now we also check whether `window.history.scrollRestoration`
is writable too.
Fixes#30629
PR Close#30630
The template type-checking engine relies on the abstraction interface
`TypeCheckingProgramStrategy` to create updated `ts.Program`s for
template type-checking. The basic API is that the type-checking engine
requests changes to certain files in the program, and the strategy provides
an updated `ts.Program`.
Typically, such changes are made to 'ngtypecheck' shim files, but certain
conditions can cause template type-checking to require "inline" operations,
which change user .ts files instead. The strategy used by 'ngc' (the
`ReusedProgramStrategy`) supports these kinds of updates, but other clients
such as the language service might not always support modifying user files.
To accommodate this, the `TypeCheckingProgramStrategy` interface was
modified to include a `supportsInlineOperations` flag. If an implementation
specifies `false` for inline support, the template type-checking system will
return diagnostics on components which would otherwise require inline
operations.
Closes#38059
PR Close#38105
When the `NgIf` directive is used in a template, its context variables
can be used to capture the bound value. This is sometimes used in
complex expressions, where the resulting value is captured in a
context variable. There's two syntax forms available:
1. Binding to `NgIfContext.ngIf` using the `as` syntax:
```html
<span *ngIf="enabled && user as u">{{u.name}}</span>
```
2. Binding to `NgIfContext.$implicit` using the `let` syntax:
```html
<span *ngIf="enabled && user; let u">{{u.name}}</span>
```
Because of the semantics of `ngIf`, it is known that the captured
context variable is truthy, however the template type checker
would not consider them as such and still report errors when
`strict` is enabled.
This commit updates `NgIf`'s context guard to make the types of the
context variables truthy, avoiding the issue.
Based on https://github.com/angular/angular/pull/35125
PR Close#36627
```
export const __core_private_testing_placeholder__ = '';
```
This API should be removed. But doing so seems to break `google3` and
so it requires a bit of investigation. A work around is to mark it as
`@codeGenApi` for now and investigate later.
PR Close#38274
`Attribute` decorator has defined `attributeName` as optional but actually its
mandatory and compiler throws an error if `attributeName` is undefined. Made
`attributeName` mandatory in the `Attribute` decorator to reflect this functionality
Fixes#32658
PR Close#38131
Previously the instructions were included in the golden files to monitor the frequency and rate of
the instruction API changes for the purpose of understanding the stability of this API (as it was
considered for becoming a public API and deployed to npm via generated code).
This experiment has confirmed that the instruction API is not stable enough to be used as public
API. We've since also came up with an alternative plan to compile libraries with the Ivy compiler
for npm deployment and this plan does not rely on making Ivy instructions public.
For these reasons, I'm removing the instructions from the golden files as it's no longer important
to track them.
The are three instructions that are still being included: `ɵɵdefineInjectable`, `ɵɵinject`, and
`ɵɵInjectableDef`.
These instructions are already generated by the VE compiler to support tree-shakable providers, and
code depending on these instructions is already deployed to npm. For this reason we need to treat
them as public api.
This change also reduces the code review overhead, because changes to public api golden files now
require multiple approvals.
PR Close#38224
Prior to this commit, duplicated styles defined in multiple components in the same file were not
shared between components, thus causing extra payload size. This commit updates compiler logic to
use `ConstantPool` for the styles (while generating the `styles` array on component def), which
enables styles sharing when needed (when duplicates styles are present).
Resolves#38204.
PR Close#38213
Default change detection fails in some cases for @angular/elements where
component events are called from the wrong zone.
This fixes the issue by running all ComponentNgElementStrategy methods
in the same zone it was created in.
Fixes#24181
PR Close#37814
This commit refactors the way we store validators in AbstractControl-based classes:
in addition to the combined validators function that we have, we also store the original list of validators.
This is needed to have an ability to clean them up later at destroy time (currently it's problematic since
they are combined in a single function).
The change preserves backwards compatibility by making sure public APIs stay the same.
The only public API update is the change to the `AbstractControl` class constructor to extend the set
of possible types that it can accept and process (which should not be breaking).
PR Close#37881
This commit updates synthetic host property and listener instruction names to better align with other instructions.
The `ɵɵupdateSyntheticHostBinding` instruction was renamed to `ɵɵsyntheticHostProperty` (to match the `ɵɵhostProperty`
instruction name) and `ɵɵcomponentHostSyntheticListener` was renamed to `ɵɵsyntheticHostListener` since this
instruction is generated for both Components and Directives (so 'component' is removed from the name).
This PR is a followup after PR #35568.
PR Close#37145
ReadonlyMap is a superset of Map, in keyValuePipe we do not change the value of the object so ReadonlyPipe Works right in this case and we can accomodate more types. To accomodate more types added ReadonlyMap in Key Value pipe.
Fixes#37308
PR Close#37311
Currently we read lifecycle hooks eagerly during `ɵɵdefineComponent`.
The result is that it is not possible to do any sort of meta-programing
such as mixins or adding lifecycle hooks using custom decorators since
any such code executes after `ɵɵdefineComponent` has extracted the
lifecycle hooks from the prototype. Additionally the behavior is
inconsistent between AOT and JIT mode. In JIT mode overriding lifecycle
hooks is possible because the whole `ɵɵdefineComponent` is placed in
getter which is executed lazily. This is because JIT mode must compile a
template which can be specified as `templateURL` and those we are
waiting for its resolution.
- `+` `ɵɵdefineComponent` becomes smaller as it no longer needs to copy
lifecycle hooks from prototype to `ComponentDef`
- `-` `ɵɵNgOnChangesFeature` feature is now always included with the
codebase as it is no longer tree shakable.
Previously we have read lifecycle hooks from prototype in the
`ɵɵdefineComponent` so that lifecycle hook access would be monomorphic.
This decision was made before we had `T*` data structures. By not
reading the lifecycle hooks we are moving the megamorhic read form
`ɵɵdefineComponent` to instructions. However, the reads happen on
`firstTemplatePass` only and are subsequently cached in the `T*` data
structures. The result is that the overall performance should be same
(or slightly better as the intermediate `ComponentDef` has been
removed.)
- [ ] Remove `ɵɵNgOnChangesFeature` from compiler. (It will no longer
be a feature.)
- [ ] Discuss the future of `Features` as they hinder meta-programing.
Fix#30497
PR Close#35464
The current method of handling duplicate navigations caused by 'hashchange' and 'popstate' events for the same url change does not correctly handle cancelled navigations. Because `scheduleNavigation` is called in a `setTimeout` in the location change subscription, the duplicate navigations are not flushed at the same time. This means that if the initial navigation hits a guard that schedules a new navigation, the navigation for the duplicate event will not compare to the correct transition (because we inserted another navigation between the duplicates). See https://github.com/angular/angular/issues/16710#issuecomment-646919529Fixes#16710
PR Close#37674
This commit updates the version of Angular Components used in angular.io
to version 10.0.1. It also updates the angular.io app to adapt to
breaking changes.
PR Close#37898
This commit updates the version of Angular framework used in angular.io
to version 10.0.2. It also features a commit message with a 100+ chars
long body.
PR Close#37898
This commit updates the payload size limit for the `hello_world` test app built using Closure. This is likely an effect of the changes in https://github.com/angular/angular/pull/36578 (that reduces the bundle size for most of the apps) and additional changes in subsequent commits.
PR Close#37784
This commit replaces an assert with more descriptive error message that is thrown in case `<ng-template>` or `<ng-container>` is used as host element for a Component.
Resolves#35240.
PR Close#35916
In version 10.0.0-next.8, we introduced absolute URL support for
server-based HTTP requests, so long as the fully-resolved URL was
provided in the initial config. However, doing so represents a
breaking change for users who already have their own interceptors
to model this functionality, since our logic executes before all
interceptors fire on a request. See original PR #37071.
Therefore, we introduce a flag to make this change consistent with
v9 behavior, allowing users to opt in to this new behavior. This
commit also fixes two issues with the previous implementation:
1. if the server was initiated with a relative URL, the absolute
URL construction would fail because needed components were empty
2. if the user's absolute URL was on a port, the port would not
be included
PR Close#37539
When using the routerLinkActive directive inside a component that is using ChangeDetectionStrategy.OnPush and lazy loaded module routes the routerLinkActive directive does not update after clicking a link to a lazy loaded route that has not already been loaded.
Also the OnPush nav component does not set routerLinkActive correctly when the default route loads, the non-OnPush nav component works fine.
regression caused by #15943closes#19934
PR Close#21411
In the early Zone.js versions (< 0.10.3), `ZoneAwarePromise` did not support `Symbol.species`,
so when user used a 3rd party `Promise` such as `es6-promise`, and try to load the promise library after import of `zone.js`, the loading promise library will overwrite the patched `Promise` from `zone.js` and will break `Promise` semantics with respect to `zone.js`.
Starting with `zone.js` 0.10.3, `Symbol.species` is supported therefore this will not longer be an issue. (https://github.com//pull/34533)
Before 0.10.3, the logic in zone.js tried to handle the case in the wrong way. It did so by overriding the descriptor of `global.Promise`, to allow the 3rd party libraries to override native `Promise` instead of `ZoneAwarePromise`. This is not the correct solution, and since the `Promise.species` is now supported, the 3rd party solution of overriding `global.Promise` is no longer needed.
PR removes the wrong work around logic. (This will improve the bundle size.)
PR Close#36851
Currently Angular internally already handles `InjectionToken` as
predicates for queries. This commit exposes this as public API as
developers already relied on this functionality but currently use
workarounds to satisfy the type constraints (e.g. `as any`).
We intend to make this public as it's low-effort to support, and
it's a significant key part for the use of light-weight tokens as
described in the upcoming guide: https://github.com/angular/angular/pull/36144.
In concrete, applications might use injection tokens over classes
for both optional DI and queries, because otherwise such references
cause classes to be always retained. This was also an issue in View
Engine, but now with Ivy, this pattern became worse, as factories are
directly attached to retained classes (ultimately ending up in the
production bundle, while being unused).
More details in the light-weight token guide and in: https://github.com/angular/angular-cli/issues/16866.
Closes#21152. Related to #36144.
PR Close#37506
In #29083 a call to `getCompilerFacade` was added to `ApplicationRef` which pulls in a bit of JIT-specific code. Since the code path that calls the function can't be hit for an AOT-compiled app, these changes add an `ngJitMode` guard which will allow for dead code elimination to drop it completely. Testing it out against a new CLI project showed a difference of ~1.2kb.
PR Close#37372
This PR provides a more helpful error than the one currently present:
`el.setAttribute is not a function`. It is not valid to have directives with host bindings
on `ng-template` or `ng-container` nodes. VE would silently ignore this, while Ivy
attempts to set the attribute and throws an error because these are comment nodes
and do not have `setAttribute` functionality.
It is better to throw a helpful error than to silently ignore this because
putting a directive with host binding on an `ng-template` or `ng-container` is most often a mistake.
Developers should be made aware that the host binding will have no effect in these cases.
Note that an error is already thrown in Ivy, as mentioned above, so this
is not a breaking change and can be merged to both master and patch.
Resolves#35994
PR Close#37111
In #37221 we disabled tsickle passes from transforming the tsc output that is used to publish all
Angular framework and components packages (@angular/*).
This change however revealed a bug in the ngc that caused __decorate and __metadata calls to still
be emitted in the JS code even though we don't depend on them.
Additionally it was these calls that caused code in @angular/material packages to fail at runtime
due to circular dependency in the emitted decorator code documeted as
https://github.com/microsoft/TypeScript/issues/27519.
This change partially rolls back #37221 by reenabling the decorator to static fields (static
properties) downleveling.
This is just a temporary workaround while we are also fixing root cause in `ngc` - tracked as
FW-2199.
Resolves FW-2198.
Related to FW-2196
PR Close#37317
As of TypeScript 3.9, the tsc emit is not compatible with Closure
Compiler due to
https://github.com/microsoft/TypeScript/pull/32011.
There is some hope that this will be fixed by a solution like the one
proposed in
https://github.com/microsoft/TypeScript/issues/38374 but currently it's
unclear if / when that will
happen.
Since the Closure support has been somewhat already broken, and the
tsickle pass has been a source
of headaches for some time for Angular packages, we are removing it for
now while we rethink our
strategy to make Angular Closure compatible outside of Google.
This change has no effect on our Closure compatibility within Google
which work well because all the
code is compiled from sources and passed through tsickle.
This change only disables the tsickle pass but doesn't remove it.
A follow up PR should either remove all the traces of tscikle or
re-enable the fixed version.
BREAKING CHANGE: Angular npm packages no longer contain jsdoc comments
to support Closure Compiler's advanced optimizations
The support for Closure compiler in Angular packages has been
experimental and broken for quite some
time.
As of TS3.9 Closure is unusable with the JavaScript emit. Please follow
https://github.com/microsoft/TypeScript/issues/38374 for more
information and updates.
If you used Closure compiler with Angular in the past, you will likely
be better off consuming
Angular packages built from sources directly rather than consuming the
version we publish on npm
which is primarily optimized for Webpack/Rollup + Terser build pipeline.
As a temporary workaround you might consider using your current build
pipeline with Closure flag
`--compilation_level=SIMPLE`. This flag will ensure that your build
pipeline produces buildable and
runnable artifacts, at the cost of increased payload size due to
advanced optimizations being disabled.
If you were affected by this change, please help us understand your
needs by leaving a comment on https://github.com/angular/angular/issues/37234.
PR Close#37221
PR #13380 added support for `null` and `undefined` but the type on the parameter was not updated.
This would result in a compilation error if `fullTemplateTypeCheck` is enabled.
Fixes#36544
PR Close#37018
This commit updates payload size limits that are triggering errors after merging cda2530. That commit seems to contribute to the payload size increase, but all checks were "green" for the original PR (#35889), so it looks like it's an accumulated payload size increase from multiple changes. The goal of this commit is to bring the master branch back to "green" state.
PR Close#37123
The _tViewNode field (that was marked as internal) on the ViewRef is not
necessery as a reference to a relevant TView is available as a local
variable.
PR Close#36814
TypeScript 3.9 introduced a breaking change where extends `any` no longer acts as `any`, instead it acts as `unknown`.
With this change we retain the behavior we had with TS 3.8 which is;
When using the `EventEmitter` as a type you must always provide a type;
```ts
let emitter: EventEmitter<string>
```
and when initializing the `EventEmitter` class you can either provide a type or or use the fallback type which is `any`
```ts
const emitter = new EventEmitter(); // EventEmitter<any>
const emitter = new EventEmitte<string>(); // EventEmitter<string>
``
PR Close#36989
With this changer we update the CLI size-tracking changes for uncompressed
main-es2015 file. This file is larger due to new emitted shape of
ES2015 classes in TypeScript 3.9, which are now wrapped in IIFE.
PR Close#36989
In 420b9be1c1 all style-based sanitization code was
disabled because modern browsers no longer allow for javascript expressions within
CSS. This patch is a follow-up patch which removes all traces of style sanitization
code (both instructions and runtime logic) for the `[style]` and `[style.prop]` bindings.
PR Close#36965
Previously in v9, we deprecated the pattern of undecorated base classes
that rely on Angular features. We ran a migration for this in version 9
and will run the same on in version 10 again.
To ensure that projects do not regress and start using the unsupported
pattern again, we report an error in ngtsc if such undecorated classes
are discovered.
We keep the compatibility code enabled in ngcc so that libraries
can be still be consumed, even if they have not been migrated yet.
Resolves FW-2130.
PR Close#36921
In v9, we deprecated the use of ModuleWithProviders
without a generic. In v10, we will be requiring the
generic when using ModuleWithProviders. You can read
more about the reasoning behind this change in the
migration guide:
http://v9.angular.io/guide/migration-module-with-providers
PR Close#36892
This patch is the first of many commits to disable sanitization for
[stlye.prop] and [style] bindings in Angular.
Historically, style-based sanitization has only been required for old
IE browsers (IE6 and IE7). Since Angular does not support these old
browsers at all, there is no reason for the framework to support
style-based sanitization.
PR Close#35621
The purpose of the `WrappedValue` is to allow same object instance to be treated as different for the purposes of change detection. It is currently used with `async` pipe and only with `Observables`. The use case which it covers is if the `Observable` produces the same instance of the value but it is desirable to still try to mark it as changed for the purposes of change detection.
We believe tha the above use case is too rare to warrant special handling in the framework. (Having special handling causes application slowdown for the users and mental load for the developers.) No replacement is planned for this deprecation.
PR Close#36819
As a performance optimization, this commit splits the single
__ngtypecheck__.ts file which was previously added to the user's program as
a container for all template type-checking code into multiple .ngtypecheck
shim files, one for each original file in the user's program.
In larger applications, the generation, parsing, and checking of this single
type-checking file was a huge performance bottleneck, with the file often
exceeding 1 MB in text content. Particularly in incremental builds,
regenerating this single file for the entire application proved especially
expensive.
This commit introduces a new strategy for template type-checking code which
makes use of a new interface, the `TypeCheckingProgramStrategy`. This
interface abstracts the process of creating a new `ts.Program` to type-check
a particular compilation, and allows the mechanism there to be kept separate
from the more complex logic around dealing with multiple .ngtypecheck files.
A new `TemplateTypeChecker` hosts that logic and interacts with the
`TypeCheckingProgramStrategy` to actually generate and return diagnostics.
The `TypeCheckContext` class, previously the workhorse of template type-
checking, is now solely focused on collecting and generating type-checking
file contents.
A side effect of implementing the new `TypeCheckingProgramStrategy` in this
way is that the API is designed to be suitable for use by the Angular
Language Service as well. The LS also needs to type-check components, but
has its own method for constructing a `ts.Program` with type-checking code.
Note that this commit does not make the actual checking of templates at all
_incremental_ just yet. That will happen in a future commit.
PR Close#36211
The legacy HTTP package was deprecated in v5 with the launch of
@angular/common/http. The legacy package hasn't been published
since v7, and will therefore not include a migration.
PR Close#27038
Update the Angular CLI and Angular framework packages to latest `@next`
versions. Also, update the app to look more closely to how a newly
generated app with the latest CLI would look like.
PR Close#36145
This commit updates all payload sizes for angular.io to make it easier
to compare payload size changes as a result of upgrading Angular
packages and other dependencies in subsequent commits.
PR Close#36145
Previously it was not possible to provide `CacheQueryOptions` ([MDN](https://developer.mozilla.org/en-US/docs/Web/API/Cache)) for querying the Cache.
This commit introduces a new parameter called `cacheQueryOptions` for `DataGroup` and `AssetGroup`.
Currently only `ignoreSearch` is supported as `ignoreVary` and `ignoreMethod` would require using
the complete Request object for matching which is not possible with the current implementation.
Closes#28443
PR Close#34663
Only refresh transplanted views at the insertion location in Ivy.
Previously, Ivy would check transplanted views at both the insertion and
declaration points. This is achieved by adding a marker to the insertion
tree when we encounter a transplanted view that needs to be refreshed at
its declaration. We use this marker as an extra indication that we still
need to descend and refresh those transplanted views at their insertion
locations even if the insertion view and/or its parents are not dirty.
This change fixes several issues:
* Transplanted views refreshed twice if both insertion and declaration
are dirty. This could be an error if the insertion component changes
result in data not being available to the transplanted view because it
is slated to be removed.
* CheckAlways transplanted views not refreshed if shielded by
non-dirty OnPush (fixes#35400)
* Transplanted views still refreshed when insertion tree is detached
(fixes#21324)
PR Close#35968
If there's an error during the first creation pass of a `TView`, the data structure may be corrupted which will cause framework assertion failures downstream which can mask the user's error. These changes add a new flag to the `TView` that indicates whether the first creation pass was successful, and if it wasn't we try re-create the `TView`.
Fixes#31221.
PR Close#36381
The html parser already normalizes line endings (converting `\r\n` to `\n`)
for most text in templates but it was missing the expressions of ICU expansions.
In ViewEngine backticked literal strings, used to define inline templates,
were already normalized by the TypeScript parser.
In Ivy we are parsing the raw text of the source file directly so the line
endings need to be manually normalized.
This change ensures that inline templates have the line endings of ICU
expression normalized correctly, which matches the ViewEngine.
In ViewEngine external templates, defined in HTML files, the behavior was
different, since TypeScript was not normalizing the line endings.
Specifically, ICU expansion "expressions" are not being normalized.
This is a problem because it means that i18n message ids can be different on
different machines that are setup with different line ending handling,
or if the developer moves a template from inline to external or vice versa.
The goal is always to normalize line endings, whether inline or external.
But this would be a breaking change since it would change i18n message ids
that have been previously computed. Therefore this commit aligns the ivy
template parsing to have the same "buggy" behavior for external templates.
There is now a compiler option `i18nNormalizeLineEndingsInICUs`, which
if set to `true` will ensure the correct non-buggy behavior. For the time
being this option defaults to `false` to ensure backward compatibility while
allowing opt-in to the desired behavior. This option's default will be
flipped in a future breaking change release.
Further, when this option is set to `false`, any ICU expression tokens,
which have not been normalized, are added to the `ParseResult` from the
`HtmlParser.parse()` method. In the future, this collection of tokens could
be used to diagnose and encourage developers to migrate their i18n message
ids. See FW-2106.
Closes#36725
PR Close#36741
A CanLoad guard returning UrlTree cancels current navigation and redirects.
This matches the behavior available to `CanActivate` guards added in #26521.
Note that this does not affect preloading. A `CanLoad` guard blocks any
preloading. That is, any route with a `CanLoad` guard is not preloaded
and the guards are not executed as part of preloading.
fixes#28306
PR Close#36610
This change is part of a larger effort to migrate all golden type
tracking files to a single location. Additionally, this makes it
a bit easier to manage file ownership in pullapprove.
PR Close#36455
Moves the circular deps golden for packages into a subfolder of goldens,
`/goldens/circular-deps/` to more easily target the files for
ownership.
PR Close#36630
With the large scale refactoring of the repo to the new version of clang-format, some import orders were changed.
Specifically the imports found in this range.
The file previously read:
import {TestBed} from './test_bed';
import {ComponentFixtureAutoDetect, ComponentFixtureNoNgZone, TestBedStatic, TestComponentRenderer, TestModuleMetadata} from './test_bed_common';
import {R3TestBedCompiler} from './r3_test_bed_compiler';
and now reads:
import {R3TestBedCompiler} from './r3_test_bed_compiler';
import {TestBed} from './test_bed';
import {ComponentFixtureAutoDetect, ComponentFixtureNoNgZone, TestBedStatic, TestComponentRenderer, TestModuleMetadata} from './test_bed_common';
This change in order cause the circular dependency to be entered earlier and changed the golden file for our circular deps discovery.
PR Close#36629
Currently the golden output of the circular-deps tool is purely
based on the order of source files passed to the tool, and on the
amount of imports inside source files.
This is actually resulting in deterministic output as running
the tool multiple times without any changes to source files,
results in the same output.
Though it seems like the tool is too strict and we can avoid
unnecessary golden changes if:
1. A source file that is part of a cycle is imported earlier (in terms
of how the analyzer visits them). This could result in the cycle path
starting with a different source file.
2. Source files which are not part of a cycle are imported earlier
(in terms of how the analyzer visits them). This could result in moved
items in the golden if re-approved (even though the cycles remain the same)
To fix this, we normalize the cycle path array that serves as
serializable data structure for the text-based goldens. Since
the paths represents a cycle, the path can be shifted in a
deterministic way so that cycles don't change unnecessarily
in the golden, and to simplify comparison of cycles.
Additionally, we sort the cycles in a deterministic way so
that the golden doesn't change unnecessarily (as explained above).
PR Close#36505
The matcher is allowed to return null per
https://angular.io/api/router/UrlMatcher#usage-notes
And run `yarn gulp format` to pick up recent clang format changes.
Closes#29824
BREAKING CHANGE: UrlMatcher's type now reflects that it could always return
null.
If you implemented your own Router or Recognizer class, please update it to
handle matcher returning null.
PR Close#36402
Prior to this commit, the `packages/core/src/render3/interfaces/query.ts` file used to import `QueryList` using `../../linker`, which contains a lot of re-exports and as a result, this one import caused a lot of circular deps cycles reported by the tool that checks such deps. In other places in the code the `QueryList` is imported using more narrow import (`linker/query_list`), so this commit uses the same pattern. This change allowed to reduce the number of known cycles from 343 to 207, the golden file was updated accordingly.
PR Close#36286
`KeyValuePipe` currently accepts `null` values as well as `Map`s and a
few others. However, due to the way in which TS overloads work, a type
of `T|null` will not be accepted by `KeyValuePipe`'s signatures, even
though both `T` and `null` individually would be.
To make this work, each signature that accepts some type `T` has been
duplicated with a second one below it that accepts a `T|null` and
includes `null` in its return type.
Fixes#35743
PR Close#36093
This commit augments the `FactoryDef` declaration of Angular decorated
classes to contain information about the parameter decorators used in
the constructor. If no constructor is present, or none of the parameters
have any Angular decorators, then this will be represented using the
`null` type. Otherwise, a tuple type is used where the entry at index `i`
corresponds with parameter `i`. Each tuple entry can be one of two types:
1. If the associated parameter does not have any Angular decorators,
the tuple entry will be the `null` type.
2. Otherwise, a type literal is used that may declare at least one of
the following properties:
- "attribute": if `@Attribute` is present. The injected attribute's
name is used as string literal type, or the `unknown` type if the
attribute name is not a string literal.
- "self": if `@Self` is present, always of type `true`.
- "skipSelf": if `@SkipSelf` is present, always of type `true`.
- "host": if `@Host` is present, always of type `true`.
- "optional": if `@Optional` is present, always of type `true`.
A property is only present if the corresponding decorator is used.
Note that the `@Inject` decorator is currently not included, as it's
non-trivial to properly convert the token's value expression to a
type that is valid in a declaration file.
Additionally, the `ComponentDefWithMeta` declaration that is created for
Angular components has been extended to include all selectors on
`ng-content` elements within the component's template.
This additional metadata is useful for tooling such as the Angular
Language Service, as it provides the ability to offer suggestions for
directives/components defined in libraries. At the moment, such
tooling extracts the necessary information from the _metadata.json_
manifest file as generated by ngc, however this metadata representation
is being replaced by the information emitted into the declaration files.
Resolves FW-1870
PR Close#35695
Sets up a golden file for the TypeScript circular dependencies for
source files inside of the `packages/` folder.
Also sets up the appropriate Yarn shorthand scripts, and a codeowner
group that is soley responsible for verifying changes to the golden.
PR Close#35647
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
Joey Perrott
Sonu Kapoor
Alan Agius
Misko Hevery
Andrew Scott
Andrew Scott
Anas Barghoud
Andrew Kushnir
Alessandro
marcvincenti
JiaLiPassion
Alex Rickabaugh
Andrea Canciani
Ajit Singh
Igor Minar
remackgeek
Judy Bogart
George Kalpakas
Harri Lehtola
Adam
Manduro
crisbeto
Paul Gschwendtner
Matias Niemelä
pkozlowski-opensource
Pete Bacon Darwin
Kara Erickson
Maximilian Koeller
Ayaz Hafiz
Mikel Ward
JoostK
Joey Perrott