Prior to this change, if a navigation was ongoing and a new one came in, the router could get into a state where `router.currentNavigation` was `null` even though a navigation was executing. This change moves where we set the `currentNavigation` value so it's inside a `switchMap`. This solves the problem because the `finally` on the `switchMap` had been setting `currentNavigation` to `null` but the new `currentNavigation` value would have already been set. Essentially this was a timing problem and is resolved with this change.
Fixes#29389#29590
PR Close#29636
When a UrlTree of root url was returned by a guard as a redirection, the
navigation was not processed. The issue came from the error handler which
incorrectly marked the router as already navigated.
Fixes#27845
PR Close#28271
With #27680, a bug was fixed where multiple redirects using `eager` URL update could cause navigation to fail. However, that fix introduced a problem where with `skipLocationChange` enabled, the URL tree rendered was not properly stored for reference. This specifically caused an issue with named router outlets and subsequent navigations not being recognized.
This PR stores the correct `UrlTree` for reference with later navigations. It fixes the regression introdued with #27680.
Fixes#28200
PR Close#28300
Previously when testing code injected the Compiler, it received the
top-level Compiler implementation defined in linker/compiler.ts
(and governed by the __PRE_R3__ switch). Code running under the
TestBed, however, should always use a TestBed-aware Compiler
implementation.
This commit adds such an implementation to the TestBedRender3,
which passes compiled modules through the _compileNgModule()
function.
With this change, 3 formerly disabled router integration tests
now pass.
FW-855 #resolve
PR Close#28033
Previously, we had the logic to schedule a change detection tick
inside markViewDirty(). This is fine when used in markDirty(),
the user-facing API, because it should always schedule change
detection. However, this doesn't work when used in markForCheck()
because historically markForCheck() does not trigger change
detection.
To be backwards compatible, this commit moves the scheduling
logic out of markViewDirty() and into markDirty(), so
markForCheck no longer triggers a tick.
PR Close#28048
Navigating to a route such as `/users`, you may get redirected to `/login`. Previously, if you go then route to `/users` again the URL will end up showing `/users` after the second redirect. This only happened in `UrlUpdateStrategy="eager"`. This is now fixed so after the second redirect, the URL shows the correct page.
Fixes#27116
PR Close#27523
This option means guards and resolvers will ignore changes when a provided predicate function returns `false`. This supports use cases where an application needs to ignore some param updates but not others. For example, changing a sort param in the URL might need to be ignored, whereas changing the a `project` param might require re-run of guards and resolvers.
Related to #26861#18253#27464
PR Close#27682
It looks like `fixmeIvy` imports were accidentally removed from Router integration tests, thus causing build errors. The necessary imports are now restored and the project should build normally.
PR Close#27720
`NgModule` requires that `Component`s/`Directive`s/`Pipe`s are listed in
declarations, and that each `Component`s/`Directive`s/`Pipe` is declared
in exactly one `NgModule`. This change adds runtime checks to ensure
that these sementics are true at runtime.
There will need to be seperate set of checks for the AoT path of the
codebase to verify that same set of semantics hold. Due to current
design there does not seem to be an easy way to share the two checks
because JIT deal with references where as AoT deals with AST nodes.
PR Close#27604
Navigating to a route such as `/users`, you may get redirected to `/login`. Previously, if you go then route to `/users` again the URL will end up showing `/users` after the second redirect. This only happened in `UrlUpdateStrategy="eager"`. This is now fixed so after the second redirect, the URL shows the correct page.
Fixes#27116
PR Close#27523
This commit enables the above test to run under --define=compile=aot.
To accomplish this, one import is rewritten from a strange form to the
correct absolute form.
FW-658 #resolve
PR Close#27483
This option means guards and resolvers will ignore changes to matrix parameters. Guards and resolvers will be rerun when the path changes, when path parameters change, or when query parameters change.
The primary use case for such a mode is when updating the UI and getting the URL to be in sync with local changes. For example, if displaying a sortable table, changing the sort direction is often handled by the table itself. But you would want to update the URL to be in sync with what's being displayed to the user. As long as the table sort direction is stored as a matrix parameter, you can use this option to update the URL without causing the overhead of re-running guards and resolvers.
Related to #26861#18253
PR Close#27464
BREAKING CHANGE:
The public API for `DebugNode` was accidentally too broad. This change removes
1. Public constructor. Since `DebugNode` is a way for Angular to communicate information
on to the developer there is no reason why the developer should ever need to
Instantiate the `DebugNode`
2. We are also removing `removeChild`, `addChild`, `insertBefore`, and `insertChildAfter`.
All of these methods are used by Angular to constructor the correct `DebugNode` tree.
There is no reason why the developer should ever be constructing a `DebugNode` tree
And these methods should have never been made public.
3. All properties have been change to `readonly` since `DebugNode` is used by Angular
to communicate to developer and there is no reason why these APIs should be writable.
While technically breaking change we don’t expect anyone to be effected by this change.
PR Close#27223
This option means guards and resolvers will ignore changes to optional
parameters such as query and matrix params. When the path or any path
params change, guards and resolvers will be run
Related to discussion in #18253
FW-560 #resolve
PR Close#26861
* Removed `andObservable` helper function in favor of inline implementation
* Flow `boolean | UrlTree` through guards check
* Add tests to verify behavior of `checkGuards` function flowing `UrlTree` properly
PR Close#26521
We are close enough to blacklist a few test targets, rather than whitelist targets to run...
Because bazel rules can be composed of other rules that don't inherit tags automatically,
I had to explicitly mark all of our ts_library and ng_module targes with "ivy-local" and
"ivy-jit" tags so that we can create a query that excludes all fixme- tagged targets even
if those targets are composed of other targets that don't inherit this tag.
This is the updated overview of ivy related bazel tags:
- ivy-only: target that builds or runs only under ivy
- fixme-ivy-jit: target that doesn't yet build or run under ivy with --compile=jit
- fixme-ivy-local: target that doesn't yet build or run under ivy with --compile=local
- no-ivy-jit: target that is not intended to build or run under ivy with --compile=jit
- no-ivy-local: target that is not intended to build or run under ivy with --compile=local
PR Close#26471
* If all guards return `true`, operator returns `true`
* `false` and `UrlTree` are now both valid returns from a guard
* Both these values wait for higher priority guards to resolve
* Highest priority `false` or `UrlTree` value will be returned
PR Close#26478
This is a major refactor of how the router previously worked. There are a couple major advantages of this refactor, and future work will be built on top of it.
First, we will no longer have multiple navigations running at the same time. Previously, a new navigation wouldn't cause the old navigation to be cancelled and cleaned up. Instead, multiple navigations could be going at once, and we imperatively checked that we were operating on the most current `router.navigationId` as we progressed through the Observable streams. This had some major faults, the biggest of which was async races where an ongoing async action could result in a redirect once the async action completed, but there was no way to guarantee there weren't also other redirects that would be queued up by other async actions. After this refactor, there's a single Observable stream that will get cleaned up each time a new navigation is requested.
Additionally, the individual pieces of routing have been pulled out into their own operators. While this was needed in order to create one continuous stream, it also will allow future improvements to the testing APIs as things such as Guards or Resolvers should now be able to be tested in much more isolation.
* Add the new `router.transitions` observable of the new `NavigationTransition` type to contain the transition information
* Update `router.navigations` to pipe off of `router.transitions`
* Re-write navigation Observable flow to a single configured stream
* Refactor `switchMap` instead of the previous `mergeMap` to ensure new navigations cause a cancellation and cleanup of already running navigations
* Wire in existing error and cancellation logic so cancellation matches previous behavior
PR Close#25740
This is a major refactor of how the router previously worked. There are a couple major advantages of this refactor, and future work will be built on top of it.
First, we will no longer have multiple navigations running at the same time. Previously, a new navigation wouldn't cause the old navigation to be cancelled and cleaned up. Instead, multiple navigations could be going at once, and we imperatively checked that we were operating on the most current `router.navigationId` as we progressed through the Observable streams. This had some major faults, the biggest of which was async races where an ongoing async action could result in a redirect once the async action completed, but there was no way to guarantee there weren't also other redirects that would be queued up by other async actions. After this refactor, there's a single Observable stream that will get cleaned up each time a new navigation is requested.
Additionally, the individual pieces of routing have been pulled out into their own operators. While this was needed in order to create one continuous stream, it also will allow future improvements to the testing APIs as things such as Guards or Resolvers should now be able to be tested in much more isolation.
* Add the new `router.transitions` observable of the new `NavigationTransition` type to contain the transition information
* Update `router.navigations` to pipe off of `router.transitions`
* Re-write navigation Observable flow to a single configured stream
* Refactor `switchMap` instead of the previous `mergeMap` to ensure new navigations cause a cancellation and cleanup of already running navigations
* Wire in existing error and cancellation logic so cancellation matches previous behavior
PR Close#25740
Previously, when you attempted to bootstrap a component that had a
router-outlet using ngsummaries, it would complain that the component
was not provided by any module even if it was. This commit fixes a
mistake (AFAICT) which caused the lookup of the component in the AOT
summaries to fail.
I believe this change is safe. I've run the affected tests within Google
and there were no breakages caused by this change.
PR Close#24892
CanLoad now defines UrlSegment[] as a second parameter of the function.
Users can store the initial url segments and refer to them later, e.g. to go
back to the original url after authentication via router.navigate(urlSegments).
Existing code still works as before because the second function parameter
does not have to be defined.
Closes#12411
PR Close#13127
With these changes, the types are a little stricter now and also not
compatible with Protractor's jasmine-like syntax. So, we have to also
use `@types/jasminewd2` for e2e tests (but not for non-e2e tests).
I also had to "augment" `@types/jasminewd2`, because the latest
typings from [DefinitelyTyped][1] do not reflect the fact that the
`jasminewd2` version (v2.1.0) currently used by Protractor supports
passing a `done` callback to a spec.
[1]: 566e039485/types/jasminewd2/index.d.ts (L9-L15)Fixes#23952Closes#24733
PR Close#19904
All errors for existing fields have been detected and suppressed with a
`!` assertion.
Issue/24571 is tracking proper clean up of those instances.
One-line change required in ivy/compilation.ts, because it appears that
the new syntax causes tsickle emitted node to no longer track their
original sourceFiles.
PR Close#24572
The recognizer code used to call Object.freeze() on queryParams before
using them to construct ActivatedRoutes, with the intent being to help
avoid common invalid usage. Unfortunately, Object.freeze() works
in-place, so this was also freezing the queryParams on the actual
UrlTree object, making it more difficult to manipulate UrlTrees in
things like UrlHandlingStrategy.
This change simply shallow-copies the queryParams before freezing them.
Fixes#22617
PR Close#22663
When asking the route reuse strategy to retrieve a detached route handle, store the
return value in a local variable for further processing instead of asking again later.
resolves#22474
PR Close#22475
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on RFC 3986 and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* URI fragments will now serialize the same as query strings
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
Fixes: #10280
PR Close#22337
Fixes: #10280
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on [RFC 3986](http://tools.ietf.org/html/rfc3986) and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* Query strings will now serialize with decoded slash (`/`) and question mark (`?`)
* URI fragments will now serialize the same as query strings, but hash sign (`#`) will also appear decoded
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
PR Close#22337
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
This helps ensure we use the same tsconfig.json file for all compilations.
Next steps are to make it the same tsconfig.json file used by the editor
PR Close#20964
Bazel runs on newer version of RxJs than is installed in Yarn. The never version subclasses `EmptyError` in a different way which fails the `instanceof` check. This change makes the `instanceof` check more robust with respect to `EmptyError`.
PR Close#21053
Previously, the router would merge path and matrix params, as well as
data/resolve, with special rules (only merging down when the route has
an empty path, or is component-less). This change adds an extra option
"paramsInheritanceStrategy" which, when set to 'always', makes child
routes unconditionally inherit params from parent routes.
Closes#20572.
* The problem was with the `fireChildActivationStart` function. It was taking a `path` param, which was an
array of `ActivatedRouteSnapshot`s. The function was being fired for each piece of the route that was being
activated. This resulted in far too many `ChildActivationStart` events being fired, and being fired on routes
that weren't actually getting activated. This change fires the event only for those routes that are actually
being activated.
fixes#18942
PR Close#19043
* Introduced with #18407, `RouteEvents` don't actually have a common constructor. Reverting here to be able to add new functionality to ChildActivation events.
PR Close#19043
BREAKING CHANGE: the values `true`, `false`, `legacy_enabled` and `legacy_disabled` for the router parameter `initialNavigation` have been removed as they were deprecated. Use `enabled` or `disabled` instead.
PR Close#18781
Jason Aden
Greg Magolan
Adam Plumer
Wassim Chegham
Pawel Kozlowski
stoneLeaf
kevinphelps
Kara Erickson
Alex Rickabaugh
Marc Laval
Miško Hevery
Matias Niemelä
Andrew Kushnir
Igor Minar
miginmrs
Sarun Intaralawan
Daniel Wiehl
Matt Keller
Trotyl
Marcus Krahl
Adrien Samson
sergeome
George Kalpakas
Rado Kirov
Victor Savkin
Alex Eagle
Zaven Muradyan
Steven Liekens
Veres Lajos
Victor Berchet
Oussama Ben Brahim
vsavkin
Mark Kennedy
Tobias Bosch
Chuck Jazdzewski
Olivier Combe
Dzmitry Shylovich
Lars Gyrup Brink Nielsen
Sam Verschueren
Roy Ling
Jason Aden