Currently, categories support designating only 1 group as a moderation group on the category. This commit removes the one group limitation and makes it possible to designate multiple groups as mods on a category.
Internal topic: t/124648.
A new setting attribute is used to define the areas (separated by `|`).
In addition, endpoint `/admin/config/site_settings.json` accepts new `filter_area` data.
Prior to this fix we could exit early if tags was `[]` as `tags && (tags & post.topic.tags.map(&:name)).empty?` would have returned true. This commit ensures it's not the case anymore and adds a test for it.
Co-Authored-By: Martin Brennan <mjrbrennan@gmail.com>
This change introduces a new thread notification level allowing users to get notified when someone replies to the thread.
Users who watch a thread will get a green notification on the chat icon and a user notification (blue). User notifications are consolidated based on thread id to prevent cluttering the original users notification area.
---------
Co-authored-by: Régis Hanol <regis@hanol.fr>
We're working to remove all decorators from object-literal-properties. This commit refactors all initializers which were using these decorators into classes, where decorators are allowed. Also adds cleanup logic to the local-dates initializer, which was previously missing.
This commit introduces a little bit of duplication
since the old plugin UIs not using the new plugin show
page look different from ones like AI and Gamification
which have been converted. We can use the new admin
header component on the plugins list, but for the other
pages we are manually rendering a breadcrumb trail and
the list of plugin tabs.
Over time as we convert more plugins to use the new UI
guidelines and show page we can get rid of this duplication.
Removes chat-specific changes from dfc947a97d, and adds `preventScroll: true` to prevent timing issues between the emoji picker being brought into the viewport and being focussed.
The following test is flakey. We don't care about the order because we check if the tags are being sent.
```
Failure/Error: measurement = Benchmark.measure { example.run }
expected: ["tag4", "tag5"]
got: ["tag5", "tag4"]
(compared using ==)
```
Create a topic can fail in many different ways and we don't want this to impact the rest of the application, the call will now be wrapped in a begin/rescue block and log an error if it fails.
Previous to this change there is no clean way to apply keyboard shortcuts
to things such as "add poll" and other hidden options in the toolbar
This allows shortcuts to be specified similar to how they are on the toolbar
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Now that `ActiveRecord` relations are properly handled in a `model`
step, putting this step back will allow the service to stops its
execution if there are no users to be removed without calling the pretty
big SQL query contained in the `CalculateMembershipsForRemoval` action.
When we use CTRL/CMD + K to search, on the server we run 4 queries:
- 1 for users
- 1 for groups
- 1 for category channels
- 1 for direct message channels
The server returns up to 10 results per type and the client concatenate all the results (in the order I described) and then takes the first 10 or so.
Let's say you've had 1:1s with john1, john2, and john3. Searching for “john” would return all the johns as “users”. It doesn’t make sense to also return them as 1:1 dms.
That’s what this fixes. When the search returns some users, we skip all 1:1s because we assume they will show up as the results of the “users” query.
We’ll always return matching direct messages with more than 2 users (aka. “group chats”). All 3 other queries (users, groups, and category channels) are unaffected.
Internal ref - t/136079
This patch allows using an AR relation as a model in services without
fetching associated records. It will just check if the relation is empty
or not. In the former case, the execution will stop at that point, as
expected.
This commit introduces a new frontend API to add custom items to the "Site activity" section in the new /about page. The new API is called `addAboutPageActivity` and it works along side the `register_stat` serve-side API which serializes the data that the frontend API consumes. More details of how the two APIs work together is in the JSDoc comment above the API function definition.
Internal topic: t/128545/9.
This commit improves the hilight-ing of mentions in posts and chat messages.
- `@here` and `@all` will generate a `<a class="mention --wide">`
- bots will generate a `<a class="mention --bot">`
- current user will generate a `<a class="mention --current">`
To achieve this change the following value transformer has been added: "mentions-class". It will be run in posts and chat messages after the mention is rendered.
A bug were bots were not considered in mentioned users has also been fixed as part of this PR.
This is a variation on bc3e8a9963cf9a64d114ec751c875025af169690, which was reverted due to issues on iOS. Safari's "in response to user action" check cannot follow the `runAfterFramePaint` chain of interaction -> requestAnimationFrame -> messageChannel, and so some sensitive browser APIs (e.g. clipboard, upload, etc.) were blocked.
This commit is similar, but uses `next()` instead of `runAfterFramePaint()`. The result seems the same, but doesn't have the same issue on iOS.
The chat-emoji-picker change was required to resolve a test failure. The emoji picker has never closed-on-scroll on desktop, so there is no user-facing change in behavior.
This is a follow-up to 671f40ce07 and
ed11ee9d05.
While the optimisations in the previous commits were sound, it did not
resolve the memory bloat we were seeing. It turns out that we call
`.blank?` on the model's result if the model has not been marked
optional. The problem with this is that if the model returns an
ActiveRecord relation, calling `.blank?` on the relation basically loads
everything into memory.
Therefore, this commit removes `users` as a model in the since it really isn't
a model but just a relation.
This is a follow up to ed11ee9d05.
In `Chat::AutoRemove::HandleCategoryUpdated`, we are currently loading
the related users record in batches and then handing it off to
`Chat::Action::CalculateMembershipsForRemoval.call`. However, we are
still seeing memory spike as a result of this.
This commit eliminates the allocation of `User` ActiveRecord objects until
absolutely necessary. `Chat::Action::CalculateMembershipsForRemoval.call` has been
updated to accept an ActiveRecord relation instead which allows us to
avoid the ActiveRecord allocations.
This change delays the notify watching job to allow time for message to be marked as seen within chat.
Without a slight delay the job fires straight away and often means that messages are seen on screen but the user also receives a notification due to Chat::Notifier.user_has_seen_message? returning false.
This commit seeks to reduce the memory footprint of `Chat::AutoRemove::HandleCategoryUpdated.call`
by optimizing the
`Chat::AutoRemove::HandleCategoryUpdated#remove_users_without_channel_permission` method which was
loading all the ActiveRecord users objects into memory at once. This
change updates the method call to load the ActiveRecord user objects in
batches instead.
See: https://meta.discourse.org/t/cant-edit-topic-with-poll-bug-occurs/320845?u=merefield
When the Poll is set to "results ON_CLOSE", vote numbers for each option are only streamed to the browser when the vote is Closed. It is therefore not possible to render the Results.
The current issue is that when you refresh the page, for those that have voted the default view is results. For this type of poll this should NOT happen. The Results view in this mode should not be possible to see until closure, even for the Author.
Because the votes are not yet serialised when this kind of poll remains open, an attempt to display results causes a JavaScript exception and in any case does not make logical sense.
So the fix here is making sure the default view, for Polls that have results on close, is the voting view until the Poll is Closed.
I've added a test to cover this scenario.
Additionally, this requires a refresh of the page when the poll admin actions a Close to ensure the results are serialized in.
Initially, the poll results display a maximum of 25 voters per option. If the number of voters exceeds this limit, a button allows users to load additional pages of voters.
When this button is clicked, a method is called to retrieve the additional voter information. However, there was a bug where the local tracked object was not properly updated for ranked choice voters. This is due to the existence of two attributes per option: one indicating whether new data is currently loading, and the other containing the list of voters.
Instead of updating the entire option key with the voters list, the fix requires updating the voters attribute only.
This is a small but critical change. The pull request also includes a new test that significantly increases coverage, addressing this issue and beyond.
Adds a new statistics (hidden from the UI, but available via the API) that tracks daily participating users.
A user is considered as "participating" if they have
- Reacted to a post
- Replied to a topic
- Created a new topic
- Created a new PM
- Sent a chat message
- Reacted to a chat message
Internal ref - t/131013
* FEATURE: Change tags sent in topic_tags_changed trigger in discourse_automation
Before, it was sending the old tags and the current tags in topic.
Now, it sends the removed tags and the added tags in the topic.
* DEV: update `missing_tags` to be `removed_tags`
* DEV: add spacing for better readability
This outlet is rendered before the content of the drawer. The `currentRouteName` is accessible in `outletArgs`.
Example:
```gjs
export default class Test extends Component {
<template>
{{#if (eq @outletArgs.currentRouteName "chat.browse")}}
the browse page
{{/if}}
</template>
}
```
What does this add?
===================
This PR adds an extra button to the poll to show the absolute number of
people who voted for each option. This button will only be added for
the single/multi-select bar chart.
Related meta topic: https://meta.discourse.org/t/absolute-numbers-in-polls/32771
Prior to this fix the query in stalled_topic_finder would assume that tags/categories would be nil or an array of ids. However it can be an empty array, in this case the query will not return results.
* FIX: make the check better for drawer rerouter
* adds a redirect method to chat-drawer-routes
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Fixes issue with polls not being fully updated by remote vote contributions in (semi-) real-time.
This was down to too great a focus on tracking local state and not accommodating a more data down approach with responsive getters.
This is now implemented.
I've tried hard to minimise the changes whilst making sure the paradigm is properly followed through.
* FIX: Remove chat default channel being applied to mobile chat and drawer
* DEV: removing chat_default_channel_id setting
* DEV: add migration to remove chat default channel id
* DEV: remove default_channel_validator and tests
* DEV: rename chat preferred mobile index to chat preferred index
* UX: change routing to be consistent with mobile
* DEV: change migration file to use script
* UX: show footer only if more than one option is available
* UX: Remove desktopView only checks for chat
* DEV: Remove unused imports
* UX: Update chat footer checks and Add rerouting to chat drawer
* UX: Add margin to chat row in desktop and update chat drawer logic
* UX: Change chat in desktop to use flexbox
* UX: Add drawer actions to chat navbar
* DEV: Update page object with new chat css classes
removed `.open-browse-page-btn` usage in 7bd65006d7
* DEV: rename `browse/open` in chat url to `channels`
* UX: Adjust css for when in threads mode
* DEV: change css class name in no_sidebar_spec.rb
* DEV: rename tests to be more descriptive with the action they are testing
update chat template to not rely on `:has`
* DEV: update test and add method to chat page object
* DEV: update no_sidebar_spec for chat changes
* DEV: remove tests from navigation_spec that no longer apply
* DEV: revert typo in test
* DEV: change url path for mobile chat in test specs
* DEV: Add check for when is desktop in rerouting
* UX: Removed footer from desktop.
Made `hasThreads` and `hasDirectMessages` methods in chat-drawer public
* UX: remove sidebar on desktop full page if dm list is empty
* DEV: Address review comments
* DEV: Adjust reroute logic for chat browse
remove unused code
* UX: Adjust rerouting to go to browse.open
* UX: Change rerouting to be more consistent
Add chat_default_channel_id routing
* UX: Update rerouting configuration for chat routes
* DEV: Update tests with the new chat behavior
* DEV: revert changes made in tests and bring back toggle for drawer
* DEV: revert classes in page objects
* DEV: Add tests to new chat navigation behavior
remove unused stylesheets
revert deleted lines in tests
update concat class logic in chat dm template
* DEV: update css on test
The message grace edit window (10 seconds) was too short after freezing time, possibly causing the test to fail occasionally if the record is not updated within 5 seconds.
* `@ember/owner` instead of `@ember/application`
* `discourse-i18n` instead of `I18n`
* `{ service } from "@ember/service"` instead of `inject as service`
This is a performance optimisation to prevent the same route to keep reloading the same endpoint.
No tests as it's not changing behavior and is also quite complex to test efficiently.
Our old group SMTP SSL option was a checkbox,
but this was not ideal because there are actually
3 different ways SSL can be used when sending
SMTP:
* None
* SSL/TLS
* STARTTLS
We got around this before with specific overrides
for Gmail, but it's not flexible enough and now people
want to use other providers. It's best to be clear,
though it is a technical detail. We provide a way
to test the SMTP settings before saving them so there
should be little chance of messing this up.
This commit also converts GroupEmailSettings to a glimmer
component.
This PR introduces FormKit, a component-based form library designed to simplify form creation and management. This library provides a single `Form` component, various field components, controls, validation mechanisms, and customization options. Additionally, it includes helpers to facilitate testing and writing specifications for forms.
1. **Form Component**:
- The main component that encapsulates form logic and structure.
- Yields various utilities like `Field`, `Submit`, `Alert`, etc.
**Example Usage**:
```gjs
import Form from "discourse/form";
<template>
<Form as |form|>
<form.Field
@name="username"
@title="Username"
@validation="required"
as |field|
>
<field.Input />
</form.Field>
<form.Field @name="age" @title="Age" as |field|>
<field.Input @type="number" />
</form.Field>
<form.Submit />
</Form>
</template>
```
2. **Validation**:
- Built-in validation rules such as `required`, `number`, `length`, and `url`.
- Custom validation callbacks for more complex validation logic.
**Example Usage**:
```javascript
validateUsername(name, value, data, { addError }) {
if (data.bar / 2 === value) {
addError(name, "That's not how maths work.");
}
}
```
```hbs
<form.Field @name="username" @validate={{this.validateUsername}} />
```
3. **Customization**:
- Plugin outlets for extending form functionality.
- Styling capabilities through propagated attributes.
- Custom controls with properties provided by `form` and `field`.
**Example Usage**:
```hbs
<Form class="my-form" as |form|>
<form.Field class="my-field" as |field|>
<MyCustomControl id={{field.id}} @onChange={{field.set}} />
</form.Field>
</Form>
```
4. **Helpers for Testing**:
- Test assertions for form and field validation.
**Example usage**:
```javascript
assert.form().hasErrors("the form shows errors");
assert.form().field("foo").hasValue("bar", "user has set the value");
```
- Helper for interacting with he form
**Example usage**:
```javascript
await formKit().field("foo").fillIn("bar");
```
5. **Page Object for System Specs**:
- Page objects for interacting with forms in system specs.
- Methods for submitting forms, checking alerts, and interacting with fields.
**Example Usage**:
```ruby
form = PageObjects::Components::FormKit.new(".my-form")
form.submit
expect(form).to have_an_alert("message")
```
**Field Interactions**:
```ruby
field = form.field("foo")
expect(field).to have_value("bar")
field.fill_in("bar")
```
6. **Collections handling**:
- A specific component to handle array of objects
**Example Usage**:
```gjs
<Form @data={{hash foo=(array (hash bar=1) (hash bar=2))}} as |form|>
<form.Collection @name="foo" as |collection|>
<collection.Field @name="bar" @title="Bar" as |field|>
<field.Input />
</collection.Field>
</form.Collection>
</Form>
```
This commit ensures the browse page can be loaded in the drawer and doesn’t force full page mode.
Other notable changes of this commit:
- be consistent about wrapping each full page route with "c-routes.--route-name" and each drawer container with "c-drawer-routes.--route-name"
- move browse channels into its own component, it was before in the template of the channels browse
This change allows us to distinguish between regular user generated chat messages and those created via the Chat SDK.
A new created_by_sdk boolean column is added to the Chat Messages table. When this value is true, we will not include the message in the user summary email that is sent to users.
Prior to this fix the following sequence would cause an overflow:
- open a thread
- expand thread panel to maximum width
- close panel
- reduce window width
- open thread again
- 💥
The fix is now ensuring that we never use or set a width which would cause the main panel + side panel to be larger than the chat container. We also removed the service as it was overkill for this case and it's easier to have all the implementation at one place.
This commit also uses JS animation api to set the width of the panel.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
During migration of Poll plugin from widget basis to glimmer, some functionality was inadvertently dropped:
- A single button should appear instead of the dropdown menu when there is only one valid "poll admin" action
- No button should appear when there are no valid "poll admin" actions for current user
This PR restores the original behaviour and adds test coverage (that didn't exist prior to migration, partly why it wasn't caught earlier)
relates to #27204
related meta topic: https://meta.discourse.org/t/what-is-the-gear-button-under-the-poll-for/315477/2
Prior to this fix we would show the message after a round trip to the server. If you had a too long message error, at this point your input would be empty and we would show an error in chat. It's important to have this server side safety net, but we can have a better UX by showing an error on the frontend before sending the message, that way you can correct your message before sending it and not lose it.
Fixes a flaky test. `afterUpdate` from chart.js is not integrated with the runloop and component lifecycle, as a result we have no guarantee on when it will happen. The easiest change we can do for now is ensuring we actually have the DOM we expect to have, and if not, we exit early.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Co-authored-by: merefield <merefield@gmail.com>
The "migration to Glimmer" has been broken out here from #27155 to make the review process less onerous and reduce change risk:
* DEV: migrates most of the widget code to Glimmer in prep for IRV additions
* NB This already incorporates significant amounts of review and feedback from the prior PR.
* NB because there was significant additional feedback relating to older Poll code that I've improved with feedback, there are some additional changes here that are general improvements to the plugin and not specific to IRV nor Glimmer!
* There should be no trace of IRV code here.
Once this is finalised and merged we can continue to progress with #27155.
Follow up to #27631 to account for group mentions in channels.
We only want to show mentions for groups that are currently mentionable and those that the current user belongs to.
I am changing many of these to notes or resolving them as is,
most of these I have not actively worked on in years so someone
else can work on them when we get to these areas again.
A previous refactor has prevented errors to show correctly. The guilt of the issue is that we were not calling the error variable correctly in the templates.
This commit also adds a spec for this case, and removes the need for `I18n.backend.store_translations` in specs so we don't have to write too much boilerplate each time we write a spec.
We want to allow admins to make new required fields apply to existing users. In order for this to work we need to have a way to make those users fill up the fields on their next page load. This is very similar to how adding a 2FA requirement post-fact works. Users will be redirected to a page where they can fill up the remaining required fields, and until they do that they won't be able to do anything else.
In 53b3d2f0dc we introduced a stricter BBCode Tag parser. It prevents having "values" with spaces when they're not surrounded by a valid pair of quotes.
The `[details=` BBCode Tag is popular enough that it's worth adding a special case for it (especially since it doesn't support other parameters).
This also adds the Finnish pair of quotes.
Context - https://meta.discourse.org/t/details-accepts-only-one-word-as-summary/313019
* DEV: Upgrade Rails to 7.1
* FIX: Remove references to `Rails.logger.chained`
`Rails.logger.chained` was provided by Logster before Rails 7.1
introduced their broadcast logger. Now all the loggers are added to
`Rails.logger.broadcasts`.
Some code in our initializers was still using `chained` instead of
`broadcasts`.
* DEV: Make parameters optional to all FakeLogger methods
* FIX: Set `override_level` on Logster loggers (#27519)
A followup to f595d599dd
* FIX: Don’t duplicate Rack response
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
* DEV: Upgrade Rails to 7.1
* FIX: Remove references to `Rails.logger.chained`
`Rails.logger.chained` was provided by Logster before Rails 7.1
introduced their broadcast logger. Now all the loggers are added to
`Rails.logger.broadcasts`.
Some code in our initializers was still using `chained` instead of
`broadcasts`.
* DEV: Make parameters optional to all FakeLogger methods
* FIX: Set `override_level` on Logster loggers (#27519)
A followup to f595d599dd
* FIX: Don’t duplicate Rack response
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
* Revert "FIX: Set `override_level` on Logster loggers (#27519)"
This reverts commit c1b0488c54.
* Revert "DEV: Make parameters optional to all FakeLogger methods"
This reverts commit 3318dad7b4.
* Revert "FIX: Remove references to `Rails.logger.chained`"
This reverts commit f595d599dd.
* Revert "DEV: Upgrade Rails to 7.1"
This reverts commit 081b00391e.
There is currently only one scenario when both the composer and a user card would be present at the same time:
if you have the composer open and then you click on something outside it that triggers a card. Which implies intent to see the card (unobstructed by the composer 😉)
The reverse doesn't happen because opening the composer would close an existing user card.
In theory there's also displaying a user card by clicking on a mention in composer's preview but that functionality is currently broken (and this PR is a prerequisite 😉)
---
I changed `.user-card, .group-card` to `.fk-d-menu[data-identifier="card"]` because that regressed when we moved user cards to float-kit – they are nested inside `.fk-d-menu` so its `z-index` is now important (effectively the cards had `z-index: z("dropdown")` instead of `z("usercard")`)
Wasn't quite handling the cases where a closing bracket `]` was used in the value of one of the attributes.
```markdown
[chat quote=user channel="[broken]"]
```
Would not be correctly parsed because we would _greedily_ use the first `]` as the end of the tag even though it might be a valid character when inside proper quotes.
c39a4de139/app/assets/javascripts/discourse-markdown-it/src/features/bbcode-block.js (L62)
Re-wrote the `parseBBCodeTag` to properly handle the following cases
- A closing tag (aka `[/name]`) which are easy since they don't have any attributes
- An old `[quote=...]` format we used that doesn't uses quotes but still has various attributes of the form `key:value`
- All three valid BBCode opening tag formats we support
- `[name]` without any attributes
- `[name=foo]` with a default value
- `[name foo=bar]` with some attributes
Ended up having to fix/rewrite the few bbcode rules that were using the `parseBBCodeTag` function, namely `d-wrap` and `discourse-local-dates`.
While working on this, I think I also found a way to get rid the of shims we had in place so that plugins could use the `parseBBCodeTag` function.
Reference - https://meta.discourse.org/t/having-a-right-bracket-in-a-channel-name-breaks-all-quotes-from-that-channel/308439
* remove default prop values where they're being set in constructor
* replace some `||` operators in constructors with `??` so the fallback boolean values are actually used
* remove an unused service injection (and sort the rest)
* remove unused prop
* inline an arg check
* remove an unnecessary `?.` operator
* sort element attributes
This change replaces the chat drawer tabs with new drawer routes for channels, direct messages and threads.
The main objective is to improve navigation within drawer, now that we have separation of chat sections in drawer.
The order of chat direct message groups can sometimes place usernames in an unexpected order, this change tests multiple combinations of usernames and accepts them no matter what order they are in.
In 4e7a75a7ec, we moved to a single admin plugin page and added a few fields to the "plugin serializer" but we already had a proper route with the correct serializers to properly load channels.
This fixes it by removing the "add_to_serializer" calls and changed the calls to "/admin/plugins/chat.json" to the proper "/admin/plugins/chat/hooks.json" route.
Meta - https://meta.discourse.org/t/names-are-missing-from-list-when-creating-new-chat-channel-webhooks/308481
When chat is enabled, there's a scheduled job that runs every 5 minutes to check whether we need to send a "chat summary" email to users with unread chat messages or mentions.
On Discourse with a large number of users, the query used wasn't optimal and sometimes taking minutes. Which isn't good when the query is called every 5 minutes 😬
This PR reworks the query in `Chat::Mailer.send_unread_mentions_summary`.
Instead of starting from the `users` table, it starts from the `user_chat_channel_memberships` table which is the main piece tying everything together.
The new query is mostly similar to the previous one, with some bug fixes (like ensuring the user has `allow_private_messages` enabled for direct messages) and is also slightly simpler since it doesn't keep track of the `memberships_with_unread_messages` anymore. That part has been moved to the `user_notifications.chat_summary` email method.
The `UserEmailExtension` has been deleted since that was using to N+1 update the `user_chat_channel_memberships.last_unread_mention_when_emailed_it`(quite a mouthful 😛) but that's now done directly in the `user_notifications.chat_summary` email method.
The "plat de résistance" of that PR - the `user_notifications.chat_summary` method has been re-worked for improved performances 🚀
Instead of doing everything in one query, it does 4 tiny ones.
- One to retrieve the list of unread mentions (@something) in "category" channels
- One to retrieve the list of unread messages in "direct message" channels (aka. 1-1 and group discussions)
- One to load all the chat messages for each "category" channels from the last unread mention
- One to load all the chat messages for each "direct message" channels from the last unread message
All the specs for both `Chat::Mailer` and `UserNotification.chat_summary` have been rewriten for easier comprehension and faster execution (mostly by not using chat services which makes the specs go 10x slower...)
Internal ref - t/129848
When adding custom translations for tests using `I18n.backend.store_translations`,
we need to remove the custom translations at the end of each test to
prevent the custom translations from leaking to other tests.
This change prevents explicitly declaring each route that should be intercepted for chat drawer mode.
In theory all chat drawer routes should be intercepted from the main chat routes file and therefore we would only need to add new drawer routes directly within chat-drawer-router.js.
This change allows chat drawer users to edit channel settings and members without leaving drawer mode. If a channel is open within chat drawer and the user clicks the Channel name, it will load channel settings within the drawer.
This change allows the correct number of members to be added when creating a group direct message, based on the site setting chat_max_direct_message_users.
Previously we counted the current user within the max user limit and therefore the count was off by 1.
Before this fix we could only list messages of a thread if it was part of a `threading_enabled` channel or if the thread was set to `force`.
Due to our design of also using a thread id when this is just a chain of replies so we can switch from threading enabled to disabled at any time, we will allow `Chat:: ListChannelThreadMessages` to list the messages of any thread, the only important requirements are:
- having a thread id
- being able to access this thread
To allow this, this commit simply removes the check on `threading_enabled` or `force`.
Under some circumstances, the TextField component could trigger a `Assertion Failed: You attempted to update attrs on ..., but it had already been used previously in the same computation...` error, causing the Ember app to crash.
A few follup changes after changing to the chat footer split for drawer:
* Fixing a bug that stretched the unread indicator on mobile
* Minor style changes in hover/focus behaviour for chat drawer
* Repositioning of unread indicator so it has more space at the top of the footer
* Using the `c-unread-indicator` mixin
Was "removing" (rather not re-applying) the `[spoiler]` BBCode because we were testing the **whole** class of the `span`/`div` was `spoiled` but we added another class and thus broke this functionnality.
In order to fix this issue, the test to determine whether a `span`/`div` is a spoiler, now uses a regular expression to check whether the `class` **contains** the word `spoiled`.
Reference - https://meta.discourse.org/t/quoting-spoiler-text-doesnt-include-spoiler-tags-in-the-quote/170145
Adds a placeholder image + CTA in chat, for empty channel and DM lists.
On desktop with drawer mode, we split chat into tabs (like mobile).
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Co-authored-by: David Battersby <info@davidbattersby.com>
Co-authored-by: Régis Hanol <regis@hanol.fr>
In this PR service objects were moved to Core https://github.com/discourse/discourse/pull/26506
However, ServiceRunner should be moved as well. Mostly for CI to run effortlessly without loading plugins.
Prior to this fix we had too logic to detect if a user is active or not:
- idle codepath on the frontend
- online user ids on the backend
The frontend solution is not very reliable, and both solution are just trying to be too smart. Making a lot of people questioning why they receive a notification sometimes and sometimes not. This commit removes all this logic and replaces it with a much more simpler logic:
- you can't receive notifications for channel you are actually watching
- we won't play a sound more than once every 3seconds
The `onNotification` signature is:
```
onNotification(data, siteSettings, user, appEvents)
```
And we were not passing `appEvents`.
Also explicitly inject `currentUser` in `chat-notification-manager` service.
We consider that you should always receive a notification sound when someone speaks directly with you in chat.
This commit also refactors the way we play audio in chat to make it simpler and throttle it to 3 seconds.
We also added a safeguard to ensure we won't play sounds for old messages, this case can happen when message bus is catching up the backlog (eg: in an inactive tab for example).
When users click a link that points to an existing group chat, we should reopen that chat instead of creating a new group chat so users can more easily continue ongoing conversations.
activeChannel is something we should use less and less as it could not exist, in this case we have the channel right here in the function so there's no reason to reach for `this.chat.activeChannel`.
Prior to this fix we wouldn't intercept it, and we also wouldn't handle it, which in result would cause us to handle as a full page interaction and open the full page chat even if you were in drawer mode.
When a user had the chat option "Show activity indicator in header" set to "all new messages", and they would get a reply to a thread they're part of, the chat icon in the header would not show the unread bubble indicator.
In order to fix this, the `ChatHeaderIconUnreadIndicator` component will now `showUnreadIndicator` whenever there is either one unread public channel or there are unread threads.
I only added a system spec for this very specific path because I don't want to slow down the whole suite to test for all the various combination of the `chat_header_indicator_preference` values.
Internal ref - t/128874
Not 100% sure why the changes in `PrettyText.format_for_email` raised this issue, but we were missing adding a link to the Discourse instance whenever we are replacing the elided part of a post with a link to either the post or the Discourse instance in the email.
Also reformated the specs using better variable names (sometimes a variable named `md` would contain some html) and used the `match_html` helper for all the tests.
Given this is currently buggy and we have the cancel button Im not sure this is actually necessary. I feel like it's adding a lot of noise of low value.
For now at least, it's better without it.
This commit reuses the existing codepath in desktop-notifications and make it available to use to chat.
primaryTab was too hard to test if not impossible in this service test, however isIdle and disabled notifications are correctly tested.
Prior to this change, only mentions would get a notification and a sound. This change will not create a notification for this case, but will play a sound. This is still respecting notification settings, not playing the sound when you are viewing the channel or not following it.
---------
Co-authored-by: Régis Hanol <regis@hanol.fr>
(experimental)
The initial implementation of glimmer topic-list and related components. Does not include new APIs and isn't compatible with existing customization. That's gonna come in future PRs.
Enabled by adding groups to `experimental_glimmer_topic_list_groups` setting.
Debouncing the audio was causing the audio to be lost sometimes, somewhat randomly. It's not supposed to be necessary.
The commit also refactors the code to async/await.
Prior to this fix we were using `topic.current_post_number` which is coming from the server side and represents the initial topic scroll position when initially rendered to the end user. However, this value is not dynamic and is not updated when the user scrolls, `topic.currentPost` is the dynamic equivalent.
No test as there are very low chances a test like this one based on scroll position, will be reliable over time.
... wasn't properly escaped so it would should html entities (like `'` instead of the apostrophe `'`).
I checked all the other places we show an excerpt and this was the only one that was missing the call to `htmlSafe` -> `replaceEmoji`.
Internal ref - t/128877
The translations of the labels of some of the chat preferences dropdowns were not customizable via the "site texts" feature.
This was because they were declared outside of a Controller class and were thus not taking into account the customization through "site texts".
Internal ref - t/128859
When you reply to a chat message, we [always create a thread][1]. But when the channel we're in doesn't have threading enabled, the reply is _technically_ not a thread.
This changes the `in_thread?` method to check for both the presence of a `thread_id` and to ensure that the channel has `threading_enabled`.
Internal ref - t/128103/3
[1]: e6e3eaf472/plugins/chat/app/services/chat/create_message.rb (L110-L115)
Whenever you get a bookmark notification, a mention notification, or click on a bookmark on a message in a long thread, we should ensure we always highlight and show the proper message.
Before this fix, we would correctly load the thread, but would always start at the bottom.
Internal ref. t/128103
For both `chat_allowed_groups` and `chat_message_flag_allowed_groups`,
this commit removes the `is_staff?` guardian check, and instead
adds both `moderators` and `admins` auto groups as `mandatory_values`
to those settings, as part of an ongoing effort to do this for
group-based setting values.
The automation plugin has 4 custom field types that are array typed. However, array typed custom fields are deprecated and should be migrated to JSON type.
This commit does a couple of things:
1. Migrate all four custom fields to JSON
2. Fix a couple of small bugs that have been discovered while migrating the custom fields to JSON (see the comments on this commit's PR for details https://github.com/discourse/discourse/pull/26939)
Some combinations of start_date and frequency/interval values can cause a recurring automation rule to either trigger before its start_date or never trigger. Example repros:
- Configure a recurring automation with hourly recurrence and a start_date several days ahead. What this will do is make the automation start running hourly immediately even though the start_date is several days ahead.
- Configure a recurring automation with a weekly recurrence and a start_date several weeks ahead. This will result in the automation never triggering even after the start_date.
These 2 scenarios share the same cause which is that the automation plugin doesn't use the start_date as the date for the first run and instead uses the frequency/interval values from the current time to calculate the first run date.
This PR fixes this bug by adding an explicit check for start_date and using it as the first run's date if it's ahead of the current time.
This change adds a wrapper link around the thread list details on mobile to make the click area larger.
We also update child div elements to span to ensure valid html, since the link is an inline element and divs are block level.
---------
Co-authored-by: chapoi <101828855+chapoi@users.noreply.github.com>
We were missing two `getURL` calls.
The test is now written for subfolder but it's good enough. If it's working for subfolder, it's working for non subfolders, the opposite being false.
menus and tooltips are now appended to their own portals. The service are the only responsible for managing the instances, prior to this commit, services could manage one instance, but the DMenu and DTooltip components could also take over which could cause unexpected states.
This change also allows nested menus/tooltips.
Other notable changes:
- few months ago core copied the CloseOnClickOutside modifier of float-kit without removing the float-kit one, this commit now only use the core one.
- the close function is now trully async
- the close function accepts an instance or an identifier as parameter
Whenever a post already failed "lightweight" validations, we skip all the expensive validations (that cooks the post or run SQL queries) so that we reply as soon as possible.
Also skip validating polls when there's no "[/poll]" in the raw.
Internal ref - t/115890
- prevents re-rendering avatars while updating messages quickly in the thread preview indicator
- ensures the cancel button is shown when you are admin OR when the streamed message is a reply to the current user
Prior to this commit, only system users had this pass.
Another significant change of the PR, is to make membership of a channel the angular stone of the permission check to create/update/stop streaming a message. The idea being, if you are a member of a channel already we don't need to check if you can join it AGAIN.
We also have `Chat::AutoRemove::HandleCategoryUpdated` which will deal with permissions change so it's simpler and less prone to error to consider the membership as the only source of truth.
There's no point checking if a user can join a channel if they are already part of it. This case was frequent when using `enforce_membership: true` for custom bots for example.
This case had not been tested end to end as `Discourse.track_events` was not working when wrapping `send_message`. Because of this lack of end to end test, a regression has been created when renaming the expected context properties. This commit fixes the regression and write a slightly convulted, but effective end to end test.
This commit introduces several enhancements to the ChatSDK module, aiming to improve the functionality and usability of chat thread interactions. Here's what has been changed and added:
1. **New Method: `first_messages`:**
- Added a method to retrieve the first set of messages from a specified chat thread.
- This method is particularly useful for fetching initial messages when entering a chat thread.
- Parameters include `thread_id`, `guardian`, and an optional `page_size` which defaults to 10.
- Usage example added to demonstrate fetching the first 15 messages from a thread.
2. **New Method: `last_messages`:**
- Added a method to retrieve the last set of messages from a specified chat thread.
- This method supports reverse pagination, where the user may want to see the most recent messages first.
- Similar to `first_messages`, it accepts `thread_id`, `guardian`, and an optional `page_size` parameter, defaulting to 10.
- Usage example provided to illustrate fetching the last 20 messages from a thread.
The TextCleaner step has been moved from chat message’s validation to create_message/update_message services. It allows us to easily tweak part of its behavior depending on the needs.
For example we will now disable strip_whitespaces by default when streaming messages as we want to keep newlines and spaces at the end of the message.
Recurring automations are triggered by a scheduled job that runs every minute and checks for due automations, runs them and then marks as them as completed (by deleting the `PendingAutomation` record). However, the job is currently subject to a race condition where a recurring automation can be executed more than once at its due date if it takes more than a minute to finish.
This commit adds a mutex around the code that triggers the recurring automation so that no concurrent executions can happen for a single automation.
Meta topic: https://meta.discourse.org/t/daily-summary-9pm-utc/291850/119?u=osama.
It's currently possible to setup multiple automation rules that trigger each other resulting in an infinite loop. To prevent that, this commit adds a global "circuit breaker" that prevents all automations from triggering while an automation rule is executing.
Internal topic: t/124365.
Those were all low hanging fruits - all were already glimmer components, so this was mostly merging js and hbs files and adding imports.
(occasionally also adds/fixes class names)
David Battersby
Osama Sayegh
Discourse Translator Bot
Krzysztof Kotlarek
Joffrey JAFFEUX
David Taylor
Martin Brennan
Renato Atilio
Gabriel Grubba
Roman Rizzi
Loïc Guitaut
Robert
Jan Cernik
Alan Guo Xiang Tan
Sam
Régis Hanol
Sérgio Saquetim
chapoi
Jarek Radosz
Kris
Mark VanLandingham
Penar Musaraj
锦心
Natalie Tay
David McClure
Kelv
ScottMastro
Keegan George
Ted Johansson
pangbo13