Expressions in an inline template binding are improperly recorded as
spaning an offset calculated from the start of the template binding
attribute key, whereas they should be calculated from the start of the
attribute value, which contains the actual binding AST.
PR Close#31813
There were some extra examples for `downgradeComponent()` in the upgrade
guide. Added a link to the relevant section of the guide in the
`downgradeComponent()` docs.
Fixes#31584
PR Close#34406
Currently we only run Saucelabs on PRs using the legacy View Engine
build. Switching that build to Ivy is not trivial and there are various
options:
1. Updating the R3 switches to use POST_R3 by default. At first glance,
this doesn't look easy because the current ngtsc switch logic seems to
be unidirectional (only PRE_R3 to POST_R3).
2. Updating the legacy setup to run with Ivy. This sounds like the easiest
solution at first.. but it turns out to be way more complicated. Packages
would need to be built with ngtsc using legacy tools (i.e. first building
the compiler-cli; and then building packages) and View Engine only tests
would need to be determined and filtered out. Basically it will result in
re-auditing all test targets. This is contradictory to the fact that we have
this information in Bazel already.
3. Creating a new job that runs tests on Saucelabs with Bazel. We specify
fine-grained test targets that should run. This would be a good start
(e.g. acceptance tests) and also would mean that we do not continue maintaining
the legacy setup..
This commit implements the third option as it allows us to move forward
with the general Bazel migration. We don't want to spend too much time
on our legacy setup since it will be removed anyway in the future.
PR Close#34277
When we log DI errors we get the name of the provider via `SomeClass.name`. In IE functions that inherit from other functions don't have their own `name`, but they take the `name` from the lowest parent in the chain, before `Function`. I've added some changes to fall back to parsing out the function name from the function's string form.
PR Close#34305
The way definitions are added in JIT mode is through `Object.defineProperty`, but the problem is that in IE10 properties defined through `defineProperty` won't be inherited which means that inheriting injectable definitions no longer works. These changes add a workaround only for JIT mode where we define a fallback method for retrieving the definition. This isn't ideal, but it should only be required until v10 where we'll no longer support inheriting injectable definitions from undecorated classes.
PR Close#34305
In JIT mode we use `__proto__` when reading constructor parameter metadata, however it's not supported on IE10. These changes switch to using `Object.getPrototypeOf` instead.
PR Close#34305
We've got some tests that assert that the generate DOM looks correct. The problem is that IE changes the attribute order in `innerHTML` which caused the tests to fail. I've reworked the relevant tests not to assert directly against `innerHTML`.
PR Close#34305
We have a couple of cases where we use something like `typeof Node === 'function'` to figure out whether we're in a worker context. This works in most browsers, but IE returns `object` instead of `function`. I've updated all the usages to account for it.
PR Close#34305
In `DebugElement.attributes` we return all of the attributes from the underlying DOM node. Most browsers change the attribute names to lower case, but IE preserves the case and since we use camel-cased attributes, the return value was inconsitent. I've changed it to always lower case the attribute names.
PR Close#34305
While sanitizing on browsers that don't support the `template` element (pretty much only IE), we create an inert document and we insert content into it via `document.body.innerHTML = unsafeHTML`. The problem is that IE appears to parse the HTML passed to `innerHTML` differently, depending on whether the element has been inserted into a document or not. In particular, it seems to split some strings into multiple text nodes, which would've otherwise been a single node. This ended up throwing off some of the i18n code down the line and causing a handful of failures. I've worked around it by creating a new inert `body` element into which the HTML would be inserted.
PR Close#34305
A quirk of the Angular template parser is that when parsing templates in the
"default" mode, with options specified by the user, the source mapping
information in the template AST may be inaccurate. As a result, the compiler
parses the template twice: once for "emit" and once to produce an AST with
accurate sourcemaps for diagnostic production.
Previously, only the first parse was performed during analysis. The second
parse occurred during the template type-checking phase, just in time to
produce the template type-checking file.
However, with the reuse of analysis results during incremental builds, it
makes more sense to do the diagnostic parse eagerly during analysis so that
the work isn't unnecessarily repeated in subsequent builds. This commit
refactors the `ComponentDecoratorHandler` to do both parses eagerly, which
actually cleans up some complexity around template parsing as well.
PR Close#34334
Avoids the usage of array destructuring, as it introduces calls to
a `__values` helper function in ES5 that has a relatively high
performance impact. This shaves off roughly 130ms of CPU time for a
large compilation with big templates that uses i18n.
PR Close#34332
The template parser has a certain interpolation config associated with
it and builds a regular expression each time it needs to extract the
interpolations from an input string. Since the interpolation config is
typically the default of `{{` and `}}`, the regular expression doesn't
have to be recreated each time. Therefore, this commit creates only a
single regular expression instance that is used for the default
configuration.
In a large compilation unit with big templates, computing the regular
expression took circa 275ms. This change reduces this to effectively
zero.
PR Close#34332
On a large compilation unit with big templates, the total time spent in
the `PlainCharacterCursor` constructor was 470ms. This commit applies
two optimizations to reduce this time:
1. Avoid the object spread operator within the constructor, as the
generated `__assign` helper in the emitted UMD bundle (ES5) does not
optimize well compared to a hardcoded object literal. This results in a
significant performance improvement. Because of the straight-forward
object literal, the VM is now much better able to optimize the memory
allocations which makes a significant difference as the
`PlainCharacterCursor` constructor is called in tight loops.
2. Reduce the number of `CharacterCursor` clones. Although cloning
itself is now much faster because of the optimization above, several
clone operations were not necessary.
Combined, these changes reduce the total time spent in the
`PlainCharacterCursor` constructor to just 10ms.
PR Close#34332
During TypeScript module resolution, a lot of filesystem requests are
done. This is quite an expensive operation, so a module resolution cache
can be used to speed up the process significantly.
This commit lets the Ivy compiler perform all module resolution with a
module resolution cache. Note that the module resolution behavior can be
changed with a custom compiler host, in which case that custom host
implementation is responsible for caching. In the case of the Angular
CLI a custom compiler host with proper module resolution caching is
already in place, so the CLI already has this optimization.
PR Close#34332
The export scope of NgModules from external compilations units, as
present in .d.ts declarations, does not change during a compilation so
can be easily shared. There was already a cache but the computed export
scope was not actually stored there. This commit fixes that.
PR Close#34332
To create a binding parser, an instance of `ElementSchemaRegistry` is
required. Prior to this change, each time a new binding parser was
created a new instance of `DomElementSchemaRegistry` would be
instantiated. This is an expensive operation that takes roughly 1ms per
instantiation, so it is key that multiple allocations are avoided.
By sharing a single `DomElementSchemaRegistry`, we avoid two such
allocations, i.e. save ~2ms, per component template.
PR Close#34332
Previously the calls to run the schematics were not being properly
or consistently awaited in the tests. While this currently does not
affect the tests' performance, this fix corrects the syntax and
adds stability for future changes.
PR Close#34364
In Ivy it's illegal for a template to write to a template variable. So the
template:
```html
<ng-template let-somevar>
<button (click)="somevar = 3">Set var to 3</button>
</ng-template>
```
is erroneous and previously would fail to compile with an assertion error
from the `TemplateDefinitionBuilder`. This error wasn't particularly user-
friendly, though, as it lacked the context of which template or where the
error occurred.
In this commit, a new check in template type-checking is added which detects
such erroneous writes and produces a true diagnostic with the appropriate
context information.
Closes#33674
PR Close#34339
Previously, the compiler performed an incremental build by analyzing and
resolving all classes in the program (even unchanged ones) and then using
the dependency graph information to determine which .js files were stale and
needed to be re-emitted. This algorithm produced "correct" rebuilds, but the
cost of re-analyzing the entire program turned out to be higher than
anticipated, especially for component-heavy compilations.
To achieve performant rebuilds, it is necessary to reuse previous analysis
results if possible. Doing this safely requires knowing when prior work is
viable and when it is stale and needs to be re-done.
The new algorithm implemented by this commit is such:
1) Each incremental build starts with knowledge of the last known good
dependency graph and analysis results from the last successful build,
plus of course information about the set of files changed.
2) The previous dependency graph's information is used to determine the
set of source files which have "logically" changed. A source file is
considered logically changed if it or any of its dependencies have
physically changed (on disk) since the last successful compilation. Any
logically unchanged dependencies have their dependency information copied
over to the new dependency graph.
3) During the `TraitCompiler`'s loop to consider all source files in the
program, if a source file is logically unchanged then its previous
analyses are "adopted" (and their 'register' steps are run). If the file
is logically changed, then it is re-analyzed as usual.
4) Then, incremental build proceeds as before, with the new dependency graph
being used to determine the set of files which require re-emitting.
This analysis reuse avoids template parsing operations in many circumstances
and significantly reduces the time it takes ngtsc to rebuild a large
application.
Future work will increase performance even more, by tackling a variety of
other opportunities to reuse or avoid work.
PR Close#34288
Previously 'analyze' in the various `DecoratorHandler`s not only extracts
information from the decorators on the classes being analyzed, but also has
several side effects within the compiler:
* it can register metadata about the types involved in global metadata
trackers.
* it can register information about which .ngfactory symbols are actually
needed.
In this commit, these side-effects are moved into a new 'register' phase,
which runs after the 'analyze' step. Currently this is a no-op refactoring
as 'register' is always called directly after 'analyze'. In the future this
opens the door for re-use of prior analysis work (with only 'register' being
called, to apply the above side effects).
Also as part of this refactoring, the reification of NgModule scope
information into the incremental dependency graph is moved to the
`NgtscProgram` instead of the `TraitCompiler` (which now only manages trait
compilation and does not have other side effects).
PR Close#34288
Prior to this commit, the `IvyCompilation` tracked the state of each matched
`DecoratorHandler` on each class in the `ts.Program`, and how they
progressed through the compilation process. This tracking was originally
simple, but had grown more complicated as the compiler evolved. The state of
each specific "target" of compilation was determined by the nullability of
a number of fields on the object which tracked it.
This commit formalizes the process of compilation of each matched handler
into a new "trait" concept. A trait is some aspect of a class which gets
created when a `DecoratorHandler` matches the class. It represents an Ivy
aspect that needs to go through the compilation process.
Traits begin in a "pending" state and undergo transitions as various steps
of compilation take place. The `IvyCompilation` class is renamed to the
`TraitCompiler`, which manages the state of all of the traits in the active
program.
Making the trait concept explicit will support future work to incrementalize
the expensive analysis process of compilation.
PR Close#34288
Previously the UMD rendering formatter assumed that
there would already be import (and an export) arguments
to the UMD factory function.
This commit adds support for this corner case.
Fixes#34138
PR Close#34353
This reverts commit 73fd10ddd5548ce899b897ba2779ff041914c2dc because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 6b905347bd2294bba703f6d38c983356af58946b because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 4e38a973b158ba397903199abe1e008b0627d81c because it's part of a PR
that was red on CircleCI once it was merged into master (Windows tests are only run
on master, not on PRs).
PR Close#34360
When statically evalulating UMD code it is possible to find
that we are looking for the declaration of an identifier that
actually came from a typings file (rather than a UMD file).
Previously, the UMD reflection host would always try to use
a UMD specific algorithm for finding identifier declarations,
but when the id is actually in a typings file this resulted in the
returned declaration being the containing file of the declaration
rather than the declaration itself.
Now the UMD reflection host will check to see if the file containing
the identifier is a typings file and use the appropriate stategy.
PR Close#34356
The `loadTranslations()` function will attach the `translate()` function
to `$localize.translate` to cause runtime translation to occur.
We should cleanup after ourselves by unattaching this function when
we call `clearTranslations()`.
Fixes#32781
PR Close#34346
This release brings a bug fix that https://github.com/angular/angular/pull/34243 is waiting on in order to remove rules_nodejs patches: fix(builtin): additional_root_paths in pkg_web should also include paths in genfiles and bin dirs (bazelbuild/rules_nodejs#1402)
PR Close#34112
This commit fixes a couple issues that prevent `class_binding` benchmark from running: moving constants requires by the `benchmark` function before function declaration and referencing correct consts in template instructions.
PR Close#34242
The `ModuleWithProviders` type has an optional type parameter that
should be specified to indicate what NgModule class will be provided.
This enables the Ivy compiler to statically determine the NgModule type
from the declaration files. This type parameter will become required in
the future, however to aid in the migration the compiler will detect
code patterns where using `ModuleWithProviders` as return type is
appropriate, in which case it transforms the emitted .d.ts files to
include the generic type argument.
This should reduce the number of occurrences where `ModuleWithProviders`
is referenced without its generic type argument.
Resolves FW-389
PR Close#34235
This commit refactors the way the compiler transforms .d.ts files during
ngtsc builds. Previously the `IvyCompilation` kept track of a
`DtsFileTransformer` for each input file. Now, any number of
`DtsTransform` operations that need to be applied to a .d.ts file are
collected in the `DtsTransformRegistry`. These are then ran using a
single `DtsTransformer` so that multiple transforms can be applied
efficiently.
PR Close#34235
The metadata collector for View Engine compilations emits error symbols
for static class members that have not been initialized, which prevents
a library from building successfully when `strictMetadataEmit` is
enabled, which is recommended for libraries to avoid issues in library
consumers. This is troublesome for libraries that are adopting static
members for the Ivy template type checker: these members don't need a
value assignment as only their type is of importance, however this
causes metadata errors. As such, a library used to be required to
initialize the special static members to workaround this error,
undesirably introducing a code-size overhead in terms of emitted
JavaScript code.
This commit modifies the collector logic to specifically ignore
the special static members for Ivy's template type checker, preventing
any errors from being recorded during the metadata collection.
PR Close#34296
For Ivy's template type checker it is possible to let a directive
specify static members to allow a wider type for some input:
```typescript
export class MatSelect {
@Input() disabled: boolean;
static ngAcceptInputType_disabled: boolean | string;
}
```
This allows a binding to the `MatSelect.disabled` input to be of type
boolean or string, whereas the `disabled` property itself is only of
type boolean.
Up until now, any static `ngAcceptInputType_*` property was not
inherited for subclasses of a directive class. This is cumbersome, as
the directive's inputs are inherited, so any acceptance member should as
well. To resolve this limitation, this commit extends the flattening of
directive metadata to include the acceptance members.
Fixes#33830
Resolves FW-1759
PR Close#34296
TypeScript 3.7 flags `if` conditions that implicitly coerce a function/method definition. While checking for the `template` presence on a def (actually checking whether we work with Component) in `saveNameToExportMap`, the `if` condition had implicit type coercion. This commit updates the condition to use the `isComponentDef` function (that checks `def.template` against `null` internally) to avoid compilation errors with TypeScript 3.7.
PR Close#34335
Prior to this commit, values wrapped into SafeStyle were not handled correctly in [style.prop] bindings in case style sanitizer is present (when template contains some style props that require sanitization). Style sanitizer was not unwrapping values in case a given prop doesn't require sanitization.As a result, wrapped values were used as final styling values (see https://github.com/angular/angular/blob/master/packages/core/src/render3/styling/bindings.ts#L620). This commit updates the logic to unwrap safe values in sanitizer in case no sanitization is required.
PR Close#34286
The undecorated child migration creates a synthetic decorator, which
contained `"exportAs": ["exportName"]` as obtained from the metadata of
the parent class. This is a problem, as `exportAs` needs to specified
as a comma-separated string instead of an array. This commit fixes the
bug by transforming the array of export names back to a comma-separated
string.
PR Close#34014
When ngcc is analyzing synthetically inserted decorators from a
migration, it is typically not expected that any diagnostics are
produced. In the situation where a diagnostic is produced, however, the
diagnostic would not be reported at all. This commit ensures that
diagnostics in migrations are reported.
PR Close#34014
The compiler exports a `formatDiagnostics` function which consumers can use
to print both ts and ng diagnostics. However, this function was previously
using the "old" style TypeScript diagnostics, as opposed to the modern
diagnostic printer which uses terminal colors and prints additional context
information.
This commit updates `formatDiagnostics` to use the modern formatter, plus to
update Ivy's negative error codes to Angular 'NG' errors.
The Angular CLI needs a little more work to use this function for printing
TS diagnostics, but this commit alone should fix Bazel builds as ngc-wrapped
goes through `formatDiagnostics`.
PR Close#34234
Occasionally a factory function needs to be generated for an "invalid"
constructor (one with parameters types which aren't injectable). Typically
this happens in JIT mode where understanding of parameters cannot be done in
the same "up-front" way that the AOT compiler can.
This commit changes the JIT compiler to generate a new `invalidFactoryDep`
call for each invalid parameter. This instruction will error at runtime if
called, indicating both the index of the invalid parameter as well as (via
the stack trace) the factory function which was generated for the type being
constructed.
Fixes#33637
PR Close#33739
In Ivy, if you do:
`TestBed.configureTestingModule({providers: [{provide: Service}]});`
the injector will attempt to inject Service as if it was simply listed
in the providers array like `{providers: [Service]}`
This fixes an inconsistency when similarly providing an override with no
`useValue` or `useFactory`.
PR Close#33769
Previously the JIT evaluated code for ivy localized strings included
backtick tagged template strings, which are not compatible with ES5
in legacy browsers such as IE 11.
Now the generated code is ES5 compatible.
Fixes#34246
PR Close#34265
Prior to this commit, calling change detection for destroyed views resulted in errors being thrown in some cases. This commit adds a check to make sure change detection is invoked for non-destroyed views only.
PR Close#34241
Previously, ternary expressions were emitted as:
condExpr ? trueCase : falseCase
However, this causes problems when ternary operations are nested. In
particular, a template expression of the form:
a?.b ? c : d
would have compiled to:
a == null ? null : a.b ? c : d
The ternary operator is right-associative, so that expression is interpreted
as:
a == null ? null : (a.b ? c : d)
when in reality left-associativity is desired in this particular instance:
(a == null ? null : a.b) ? c : d
This commit adds a check in the expression translator to detect such
left-associative usages of ternaries and to enforce such associativity with
parentheses when necessary.
A test is also added for the template type-checking expression translator,
to ensure it correctly produces right-associative expressions for ternaries
in the user's template.
Fixes#34087
PR Close#34221
Remove the remaining check for compile build variable in the ng_module
rule. Now that components is no longer relying on this build variable
we can safely remove it from our repository.
We will leave the remaining check for if the compile build variable is
used within our own repo, with plans to remove it in a couple months.
It is being kept in place to ensure that uncommitted local scripts for
our own development that we have locally, kill error as expected if
they still reference the compile build variable.
PR Close#34280
Adds the ability to expose global symbols in the API docs via the `@globalApi` tag. Also supports optionally setting a namespace which will be added to the name automatically (e.g. `foo` will be renamed to `ng.foo`). Relevant APIs should also be exported through the `global.ts` file which will show up under `core/global`.
PR Close#34237
Due to a bug in the existing banner, `typescript` module was require-d
instead of reusing the module passed in from tsserver.
This bug is caused by some source files in language-service that imports
`typescript` instead of `typescript/lib/tsserverlibrary`.
This is not an unsupported use case, it's just that when typescript is
resolved in the banner we have to be very careful about which modules to
"require".
The convoluted logic in the banner makes it very hard to detect
anomalies. This commit cleans it up and removes a lot of unneeded code.
This commit also removes `ts` import in typescript_host.ts and use `tss`
instead to make it less confusing.
PR Close#34262
This commit creates a way for `ng_module` rule to compile with Ivy based
on the `ivy` attribute. This enables google3 targets to pick the
compiler without using `define` flags.
PR Close#34238
Previously, create_angular_testing_module would export a mutable `let`
binding. The binding is already exporting using an accessor function
though, so the export on the let variable seems like an accidental
oversight.
This is functionally equivalent, but makes it easier for module
optimizers such as Closure Compiler to track down side effects and prune
modules.
PR Close#34232
Previously, browser_util would export a mutable `let` binding that was
initialized as a side-effect of `BrowserDetection.setup()`. This change
refactors the mutable binding into a `const` binding that is immediately
initialized in its initialized.
This is functionally equivalent, but makes it easier for module
optimizers such as Closure Compiler to track down side effects and prune
modules. It is also arguably cleaner to read (no worries about later
changes to the apparently mutable but effectively const binding).
PR Close#34207
Previously the `rootDir` was set to the entry-point path but
this is incorrect if the source files are stored in a directory outside
the entry-point path. This is the case in the latest versions of the
Angular CDK.
Instead the `rootDir` should be the containing package path, which is
guaranteed to include all the source for the entry-point.
---
A symptom of this is an error when ngcc is trying to process the source of
an entry-point format after the entry-point's typings have already been
processed by a previous processing run.
During processing the `_toR3Reference()` function gets called which in turn
makes a call to `ReflectionHost.getDtsDeclaration()`. If the typings files
are also being processed this returns the node from the dts typings files.
But if we have already processed the typings files and are now processing
only an entry-point format without typings, the call to
`ReflectionHost.getDtsDeclaration()` returns `null`.
When this value is `null`, a JS `valueRef` is passed through as the DTS
`typeRef` to the `ReferenceEmitter`. In this case, the `ReferenceEmitter`
fails during `emit()` because no `ReferenceEmitStrategy` is able to provide
an emission:
1) The `LocalIdentifierStrategy` is not able help because in this case
`ImportMode` is `ForceNewImport`.
2) The `LogicalProjectStrategy` cannot find the JS file below the `rootDir`.
The second strategy failure is fixed by this PR.
Fixes https://github.com/angular/ngcc-validation/issues/495
PR Close#34212
When directionality data was added to @angular/common locales, only
the externally used locales were updated. We need to additionally
update the closure locales which are synced into google3.
PR Close#34240
Commit that updated i18n message ids rendering (e524322c43) also introduced a couple tests that relied on a previous version of `ngI18nClosureMode` flag format. The `ngI18nClosureMode` usage format was changed in the followup commit (c4ce24647b) and triggered a problem with the mentioned tests. This commit updates the tests to a new `ngI18nClosureMode` flag usage format.
PR Close#34224
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
This comment ensures that generated template code guards
this global check.
PR Close#34211
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
PR Close#34211
This is a follow-up to #33997 where some new generic parameters were added without defaults which is technically a breaking change. These changes add the defaults.
PR Close#34206
Prior to this commit, there was no check in R3TestBed to verify that metadata is resolved using a given Type. That leads to some cryptic error messages (when TestBed tries to compile a Type without having metadata) in case TestBed override functions receive unexpected Types (for example a Directive is used in `TestBed.overrideComponent` call). This commit adds the necessary checks to verify metadata presence before TestBed tries to (re)compile a Type.
PR Close#34204
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Prior to this commit, i18n runtime code failed with the exception saying that no provider was found for ChangeDetectorRef for a pipe used in ICU. The problem happened because the underlying `createViewRef` function was not taking into account IcuContainer as a valid TNodeType. This commit updates the `createViewRef` function to return corresponding ViewRef for TNodeType.IcuContainer.
PR Close#34198
Includes a few minor performance improvements:
* In the `nextContext` instruction we assign a new LView to the `LFrame.contextLView` and then we immediately look it up to get its context. We don't need to do that since we know the view that was assigned already.
* Removes the default value for the `level` parameter of `nextContextImpl` because it generates more code in es5 and is internal-only.
* Removes the default parameter from `setActiveHostElement` since it generates extra code and it's an internal function.
* Makes a check in `setElementExitFn` more strict since we're guaranteed for the value to match the type.
PR Close#34183
Fixes ngtsc incorrectly logging an unknown element diagnostic for HTML elements that are inside an SVG `foreignObject` with the `xhtml` namespace.
Fixes#34171.
PR Close#34178
It is possible for HTML formatters to add whitespace
around the content of `i18n` attribute values. This can
make the meaning and custom ids brittle to simple
whitespace formatting.
This commit ensures that the metadata string extracted
from HTML `i18n` attributes is trimmed before being parsed
into meaning, description and custom id.
PR Close#34154
By ensuring that legacy i18n message ids are rendered into the templates
of components for packages processed by ngcc, we ensure that these packages
can be used in an application that may provide translations in a legacy
format.
Fixes#34056
PR Close#34135
Placing this configuration in to the bundle avoids having to pass the
value around through lots of function calls, but also could enable
support for different behaviour per bundle in the future.
PR Close#34135
Now that `@angular/localize` can interpret multiple legacy message ids in the
metablock of a `$localize` tagged template string, this commit adds those
ids to each i18n message extracted from component templates, but only if
the `enableI18nLegacyMessageIdFormat` is not `false`.
PR Close#34135
This change will enable the Angular compiler to provide these legacy
message ids by default, which will solve problems with ngcc not knowing
whether to generate legacy ids or not.
PR Close#34135
When first written there was no way to specify the raw text when
programmatically creating a template tagged literal AST node.
This is now fixed in TS and so the hack is no longer needed.
PR Close#34135
We should only generate the `providedIn` property in injectable
defs if it has a non-null value. `null` does not communicate
any information to the runtime that isn't communicated already
by the absence of the property.
This should give us some modest code size savings.
PR Close#34116
With this change we fix the logic to detect if a package is installed, removing a package and add a package by using the CLI schematic helpers.
Also we save `@angular/bazel` package directly as a `devDependency` when doing `ng-add`.
Closes#34164
PR Close#34181
For injectables, we currently generate a factory function in the
injectable def (prov) that delegates to the factory function in
the factory def (fac). It looks something like this:
```
factory: function(t) { return Svc.fac(t); }
```
The extra wrapper function is unnecessary since the args for
the factory functions are the same. This commit changes the
compiler to generate this instead:
```
factory: Svc.fac
```
Because we are generating less code for each injectable, we
should see some modest code size savings. AIO's main bundle
is about 1 KB smaller.
PR Close#34076
The ViewEngine translation extractor does not convert `-` to `_` for
placeholders that represent custom elements. For example `<app-component>`
gets converted to placeholders like `START_TAG_APP-COMPONENT`.
In `$localize` placeholders are expected to be snake-case, not kebab-case.
So we must normalize them when parsing a translation file that might have
been created via the View Engine translation extractor.
The `$localize` extraction code will normalize these placeholders when
creating translation files in the first place.
Fixes#34151
PR Close#34155
Various targets have their template type-checking disabled in the past.
There is no reason for this any more.
The only target that was tricky was packages/examples/core:core_examples
which was quite broken and I had to fix it up.
Template typechecking is still disabled under blaze, see FW-1753 for more
info.
PR Close#34144
due to an unfortunate condition in 168abc6d6f/packages/compiler-cli/src/ngtsc/program.ts (L430-L434) the typechecking has been disabled when running under bazel + ivy.
As far as I can tell the ivyTemplateTypeCheck flag is now obsolete, so removing this
code from ng_module.bzl is desirable. I'll send a separate PR to remove the flag completely.
PR Close#34144
If a Component or Directive is not part of any NgModule, the language
service currently produces an error message. This should not be an
error. Instead, it should be a suggestion.
This PR removes `ng.DiagnosticKind`, and instead reuses
`ts.DiagnosticCategory`.
PR closes https://github.com/angular/vscode-ng-language-service/issues/458
PR Close#34115
The language service incorrectly reports an error if it fails to find
NgModule metadata for a particular Component / Directive. In many cases,
the use case is legit, particularly in test.
This commit removes such diagnostic message and cleans up the interface
for `TypeScriptHost.getTemplateAst()`.
PR closes https://github.com/angular/vscode-ng-language-service/issues/463
PR Close#34113
To quicken migration for our own developers away from using compile=aot
for setting ivy, we actually fail the build process if the compile
build variable is used with a message to use our config flags instead.
PR Close#34109
To inform downstream users to switch to using angular_ivy_enabled as the build
variable for setting Ivy, a deprecation message is printed instructing the user
to migrate away from building with compile=*
PR Close#34109
Currently, variables of an unknown type in an `*ngFor` expression are
refined to have the type of the iterable binding of the `*ngFor`
expression. Unfortunately, this is a bug for variables aliasing
[values exported by
`*ngFor`](https://angular.io/api/common/NgForOf#local-variables),
including `index` and `first`, because they are also given the type of
the binding expression, but they are not of the binding type. For
example, in
```typescript
@Component({
selector: 'test',
template: `
<div *ngFor="let hero of heroes; let i = index; let isFirst = first">
{{ hero }}
</div>
`
})
export class TestComponent {
heroes: Hero[];
}
```
The local variables `i` and `isFirst` are determined to have a type of
`Hero`, when actually their types are `number` and `boolean`,
respectively.
This commit fixes this bug by checking if the value of a variable in an
`*ngFor` expression is known to be an export and assigning the variable
the type of that export value. Only if the variable does not alias an
export is it typed with the binding value of the `*ngFor` expression.
Closes https://github.com/angular/vscode-ng-language-service/issues/460
PR Close#34089
This allows us to update the version of the package in a single place for all tests.
Notable exemption of this is aio which currently doesn't depend on anything installed in the root.
PR Close#34002
Previously, the Angular AOT compiler would always add a
`ɵprov` to injectables. But in ngcc this resulted in duplicate `ɵprov`
properties since published libraries already have this property.
Now in ngtsc, trying to add a duplicate `ɵprov` property is an error,
while in ngcc the additional property is silently not added.
// FW-1750
PR Close#34085
Prior to this commit, the unknown element can happen twice for AOT-compiled components: once during compilation and once again at runtime. Due to the fact that `schemas` information is not present on Component and NgModule defs after AOT compilation, the second check (at runtime) may fail, even though the same check was successful at compile time. This commit updates the code to avoid the second check for AOT-compiled components by checking whether `schemas` information is present in a logic that executes the unknown element check.
PR Close#34024
When creating synthesized tagged template literals, one must provide both
the "cooked" text and the "raw" (unparsed) text. Previously there were no
good APIs for creating the AST nodes with raw text for such literals.
Recently the APIs were improved to support this, and they do an extra
check to ensure that the raw text parses to be equal to the cooked text.
It turns out there is a bug in this check -
see https://github.com/microsoft/TypeScript/issues/35374.
This commit works around the bug by synthesizing a "head" node and morphing
it by changing its `kind` into the required node type.
// FW-1747
PR Close#34065
With Angular CLI version 9 RC 3 we can run a single migration for a package using the name of the migration schematic.
We need to pass the schematic name as a value to the `migrate-only` option.
Ex:
```
ng update @angular/core --migrate-only migration-v9-undecorated-classes-with-di
```
See: https://github.com/angular/angular-cli/pull/16174
PR Close#33958
This bring is changes to the @nodejs repository required for https://github.com/angular/angular/pull/33927. See release notes for more details: https://github.com/bazelbuild/rules_nodejs/releases/tag/0.41.0.
rules_nodejs is approaching 1.0 and breaking changes for that release are being made more frequently. In this release, the ts_devserver API changed and it no longer injects html script tags into a provided index.html file. The diff on this commit is large as this breaking change affects quite a few tests.
Also note that we don’t update @angular/bazel schematics and integration/bazel as 0.41.0 is not a recommended update for angular users yet due to the breaking changes in ts_devserver & web_package (now named pkg_web). When a suitable plain npm package that is in progress is finished then it will be possible to easily replace the html injection functionality removed from ts_devserver & pkg_web.
PR Close#33996
Commit 53fc2ed8bf added support for
determining index types accessed using index signatures, but did not
include support for index types accessed using dot notation:
```typescript
const obj<T>: { [key: string]: T };
obj['stringKey']. // gets `T.` completions
obj.stringKey. // did not peviously get `T.` completions
```
This adds support for determining an index type accessed via dot
notation by rigging an object's symbol table to return the string index
signature type a property access refers to, if that property does not
explicitly exist on the object. This is very similar to @ivanwonder's
work in #29811.
`SymbolWrapper` now takes an additional parameter to explicitly set the
type of the symbol wrapped. This is done because
`SymbolTableWrapper#get` only has access to the symbol of the index
type, _not_ the index signature symbol itself. An attempt to get the
type of the index type will give an error.
Closes#29811
Closes https://github.com/angular/vscode-ng-language-service/issues/126
PR Close#33884
Now that all compile decisions are determined by the define=angular_ivy_enabled
flag, we can remove the setting of the define=compile flag throughout the repo.
PR Close#33983
Use angular_ivy_enabled to determine if Ivy is being used for the ivy_test_selector.ts symbols.
Additionally, remove the reflect_metadata genrules as we not longer have a "jit" compile option
so all possible invocations result in the same generated file. Instead we can just commit this
file.
PR Close#33983
We need to migrate to using angular_ivy_enabled value to determine whether to use
Ivy or ViewEngine for package building scripts and for size-tracking and
symbol-extract tooling.
PR Close#33983
Since config=ivy now sets the define=compile flag and the define=angular_ivy_enabled
flag to cause usage of Ivy, we can update all of the documentation and scripts that
reference compile=aot to use config=ivy.
PR Close#33983
Beginning of migration away from --define=compile=* to --define=angular_ivy_enabled=*.
Additionally, to make it clearer to developers, we will encourage use of --config=ivy
instead of directy setting the --define flag, this abstraction will allow us more
flexibility as we move foward with relation to our compile decisions at build time.
PR Close#33983
Prior to this commit, there was a runtime check in i18n logic to make sure "other" case is always present in an ICU. That was not a requirement in View Engine, so ICUs that previously worked may produce errors. This commit removes that restriction and adds support for ICUs without "other" cases.
PR Close#34042
Move a view only if it would end up at a different place.
Otherwise we would do unnecessary processing like DOM manipulation, query notifications etc.
Thanks to @pkozlowski-opensource for the change.
PR Close#34052
When inserting a `viewRef` it is possible to not provide
an `index`, which is regarded as appending to the end of
the container.
If the `viewRef` already exists in the container, then
this results in a move. But there was a fault in the logic
that computed where to insert the `viewRef` that did not
account for the fact that the `viewRef` was already in
the container, so the insertion `index` was outside the
bounds of the array.
Fixes#33924
PR Close#34052
Prior to this commit, all styles extracted from Component's template (defined using <style> tags) were ignored by JIT compiler, so only `styles` array values defined in @Component decorator were used. This change updates JIT compiler to take styles extracted from the template into account. It also ensures correct order where `styles` array values are applied first and template styles are applied second.
PR Close#34017
Previously if a type was returning itself it would cause an infinite loop in tsickle. We worked around it with a type that alises to `any`. Now that the issue has been resolved in tsickle, we can clean up the workaround.
PR Close#34019
When performing diagnostic checks or completions, we should take into
account members and properties in the base class, if any. Otherwise, the
language service will produce a false error.
PR closes https://github.com/angular/vscode-ng-language-service/issues/93
PR Close#34041
This commit fixes a compatibility bug where pre-order lifecycle
hooks (onInit, doCheck, OnChanges) for directives on the same
host node were executed based on the order the directives were
matched, rather than the order the directives were instantiated
(i.e. injection order).
This discrepancy can cause issues with forms, where it is common
to inject NgControl and try to extract its control property in
ngOnInit. As the NgControl directive is injected, it should be
instantiated before the control value accessor directive (and
thus its hooks should run first). This ensures that the NgControl
ngOnInit can set up the form control before the ngOnInit
for the control value accessor tries to access it.
Closes#32522
PR Close#34026
These apis have been deprecated in v8, so they should stick around till v10,
but since they are defunct we are removing them early so that they don't take up payload size.
PR Close#33949
In ViewEngine we were only generating code for exported classes, however with Ivy we do it no matter whether the class has been exported or not. These changes add an extra flag that allows consumers to opt into the ViewEngine behavior. The flag works by treating non-exported classes as if they're set to `jit: true`.
Fixes#33724.
PR Close#33921
Micro-benchmarks were broken after we've introduced concept of
DECLARATION_COMPONENT_VIEW on LView (after this change embedded
views must have a pointer to a parent LView).
PR Close#34031
The root view case is already covered by the existing code in the
getRenderParent function so no need to have an explicit checks
(and associated memory reads) again.
PR Close#33988
We need to make is_ivy_enabled public to allow the internal i18n
build rule to rely on it rather than relying on compile_strategy.
After we move the internal i18n rule to rely on is_ivy_enabled,
compile_strategy can then be removed.
PR Close#33992
Previously, our incremental build system kept track of the changes between
the current compilation and the previous one, and used its knowledge of
inter-file dependencies to evaluate the impact of each change and emit the
right set of output files.
However, a problem arose if the compiler was not able to extract a
dependency graph successfully. This typically happens if the input program
contains errors. In this case the Angular analysis part of compilation is
never executed.
If a file changed in one of these failed builds, in the next build it
appears unchanged. This means that the compiler "forgets" to emit it!
To fix this problem, the compiler needs to know the set of changes made
_since the last successful build_, not simply since the last invocation.
This commit changes the incremental state system to much more explicitly
pass information from the previous to the next compilation, and in the
process to keep track of changes across multiple failed builds, until the
program can be analyzed successfully and the results of those changes
incorporated into the emit plan.
Fixes#32214
PR Close#33971
Previously the visible compiler name during the ng_module build action was
ngc/ngtsc. These names however are only really known to the compiler team.
Instead we should use more general terms for which compiler is used to match
how we speak about compiler choices.
PR Close#33995
This PR brings a couple of changes;
- Removes undeed dependencies in bazel targets such as `//packages/common` & `//packages/core`
- Removes RxJs usage
- Adds `document-register-element` to architect test targets
- Use @schematics/angular helpers
- Uses the standard `$source": "projectName"` to get the projectName, which is defined in the `schema.json`
- Use workspace writer to update the workspace config
PR Close#33723
Under bazel and Ivy we don't need the shim files to be emmited by default.
We still need to the shims for blaze however because google3 code imports them.
This improves build latency by 1-2 seconds per ng_module target.
PR Close#33765
Before creating a mutating http request, service-worker
invalidates lru cache entry and writes to cache storage.
Therefore, cache storage failure can prevent making post requests.
Fix this by catching and logging cache error, add a test case.
Fixes#33793
PR Close#33930
In a package.json file, the "typings" or "types" field could be an array
of typings files. ngcc would previously crash unexpectedly for such
packages, as it assumed that the typings field would be a string. This
commit lets ngcc skip over such packages, as having multiple typing
entry-points is not supported for Angular packages so it is safe to
ignore them.
Fixes#33646
PR Close#33973
The url_tree equalQueryParams and containsQueryParam methods did not handle query params that has arrays, which resulted in the routerLinkActive to not behave as expected, change was made to ensure query params with arrays are handled correctly
fixes#22223
PR Close#22666
This introduces a second possible define flag for informing bazel to build with ivy, but
does not remove the old `compile=aot` flag for configuration.
This is the first step in migrating away from using the `compile=aot` define flag.
PR Close#33975
The assertion that we have in the `directiveInject` instruction is too restrictive and we came across some pattern where it throws unnecessarily. This commit removes that assertion for now and more detailed investigation is needed to decide is we need to restrict the set of TNodeType again.
This commit also adds a test which triggered the TNodeType.View to come up in the `directiveInject` instruction, so it might be useful to avoid regressions during further refactoring.
PR Close#33948
In 5d5c94d83, the deprecated `versionedFiles` option from the SW
asset-group configuration in `ngsw-config.json`. As a result, the
option would be silently ignored and the runtime behavior of the SW
would change (i.e. some files might not be cached and available offline
any more). This change could be easily go unnoticed by the developer.
This commit ensures this does not happen by throwing a build-time error,
when detecting the unsupported `versionedFiles` option with an error
message prompting the user to use the `files` option instead.
Jira issue: [FW-1727](https://angular-team.atlassian.net/browse/FW-1727)
PR Close#33903
Recently the ngtsc translator was modified to be more `ScriptTarget`
aware, which basically means that it will not generate non-ES5 code
when the output format is ES5 or similar.
This commit enhances that change by also "downleveling" localized
messages. In ES2015 the messages use tagged template literals, which
are not available in ES5.
PR Close#33857
Due to the fact that Tsickle runs between analyze and transform phases in Angular, Tsickle may transform nodes (add comments with type annotations for Closure) that we captured during the analyze phase. As a result, some patterns where a function is returned from another function may trigger automatic semicolon insertion, which breaks the code (makes functions return `undefined` instead of a function). In order to avoid the problem, this commit updates the code to wrap all functions in some expression ("privders" and "viewProviders") in parentheses. More info can be found in Tsickle source code here: d797426257/src/jsdoc_transformer.ts (L1021)
PR Close#33609
When ngtsc comes across a source file during partial evaluation, it
would determine all exported symbols from that module and evaluate their
values greedily. This greedy evaluation strategy introduces unnecessary
work and can fall into infinite recursion when the evaluation result of
an exported expression would circularly depend on the source file. This
would primarily occur in CommonJS code, where the `exports` variable can
be used to refer to an exported variable. This variable would be
resolved to the source file itself, thereby greedily evaluating all
exported symbols and thus ending up evaluating the `exports` variable
again. This variable would be resolved to the source file itself,
thereby greedily evaluating all exported symbols and thus ending u
evaluating the `exports` variable again. This variable would be
resolved to the source file itself, thereby greedily evaluating all
exported symbols and thus ending up evaluating the `exports` variable
again. This variable would be resolved to the source file itself,
thereby greedily evaluating all exported symbols and thus ending up
evaluating the `exports` variable again. This went on for some time
until all stack frames were exhausted.
This commit introduces a `ResolvedModule` that delays the evaluation of
its exports until they are actually requested. This avoids the circular
dependency when evaluating `exports`, thereby fixing the issue.
Fix#33734
PR Close#33772
The template type checker generates code to check directive inputs and
outputs, whose name may contain characters that can not be used as
identifier in TypeScript. Prior to this change, such names would be
emitted into the generated code as is, resulting in invalid code and
unexpected template type check errors.
This commit fixes the bug by representing the potentially invalid names
as string literal instead of raw identifier.
Fixes#33590
PR Close#33741
NgModule compilation in JIT mode (that is also used in TestBed) caches module scopes on NgModule defs (using `transitiveCompileScopes` field). Module overrides (defined via TestBed.overrideModule) may invalidate this data by adding/removing items in `declarations` list. This commit forces TestBed to recalculate transitive scopes in case module overrides are present, so TestBed always gets the most up-to-date information.
PR Close#33787
This change enables "var(--my-var)" to pass through the style sanitizer.
After consulation with our security team, allowing these doesn't create
new attack vectors, so the sanitizer doesn't need to strip them.
Fixes parts of #23485 related to the sanitizer, other use cases discussed
there related to binding have been addressed via other changes to the
class and style handling in the runtime.
Closes#23485
PR Close#33841
This commit transforms the setClassMetadata calls generated by ngtsc from:
```typescript
/*@__PURE__*/ setClassMetadata(...);
```
to:
```typescript
/*@__PURE__*/ (function() {
setClassMetadata(...);
})();
```
Without the IIFE, terser won't remove these function calls because the
function calls have arguments that themselves are function calls or other
impure expressions. In order to make the whole block be DCE-ed by terser,
we wrap it into IIFE and mark the IIFE as pure.
It should be noted that this change doesn't have any impact on CLI* with
build-optimizer, which removes the whole setClassMetadata block within
the webpack loader, so terser or webpack itself don't get to see it at
all. This is done to prevent cross-chunk retention issues caused by
webpack's internal module registry.
* actually we do expect a short-term size regression while
https://github.com/angular/angular-cli/pull/16228
is merged and released in the next rc of the CLI. But long term this
change does nothing to CLI + build-optimizer configuration and is done
primarly to correct the seemingly correct but non-function PURE annotation
that builds not using build-optimizer could rely on.
PR Close#33337
NgModules in Ivy have a definition which contains various different bits
of metadata about the module. In particular, this metadata falls into two
categories:
* metadata required to use the module at runtime (for bootstrapping, etc)
in AOT-only applications.
* metadata required to depend on the module from a JIT-compiled app.
The latter metadata consists of the module's declarations, imports, and
exports. To support JIT usage, this metadata must be included in the
generated code, especially if that code is shipped to NPM. However, because
this metadata preserves the entire NgModule graph (references to all
directives and components in the app), it needs to be removed during
optimization for AOT-only builds.
Previously, this was done with a clever design:
1. The extra metadata was added by a function called `setNgModuleScope`.
A call to this function was generated after each NgModule.
2. This function call was marked as "pure" with a comment and used
`noSideEffects` internally, which causes optimizers to remove it.
The effect was that in dev mode or test mode (which use JIT), no optimizer
runs and the full NgModule metadata was available at runtime. But in
production (presumably AOT) builds, the optimizer runs and removes the JIT-
specific metadata.
However, there are cases where apps that want to use JIT in production, and
still make an optimized build. In this case, the JIT-specific metadata would
be erroneously removed. This commit solves that problem by adding an
`ngJitMode` global variable which guards all `setNgModuleScope` calls. An
optimizer can be configured to statically define this global to be `false`
for AOT-only builds, causing the extra metadata to be stripped.
A configuration for Terser used by the CLI is provided in `tooling.ts` which
sets `ngJitMode` to `false` when building AOT apps.
PR Close#33671
The Ivy template type-checker is capable of inferring the type of a
structural directive (such as NgForOf<T>). Previously, this was done with
fullTemplateTypeCheck: true, even if strictTemplates was false. View Engine
previously did not do this inference, and so this causes breakages if the
type of the template context is not what the user expected.
In particular, consider the template:
```html
<div *ngFor="let user of users as all">
{{user.index}} out of {{all.length}}
</div>
```
As long as `users` is an array, this seems reasonable, because it appears
that `all` is an alias for the `users` array. However, this is misleading.
In reality, `NgForOf` is rendered with a template context that contains
both a `$implicit` value (for the loop variable `user`) as well as a
`ngForOf` value, which is the actual value assigned to `all`. The type of
`NgForOf`'s template context is `NgForContext<T>`, which declares `ngForOf`'s
type to be `NgIterable<T>`, which does not have a `length` property (due to
its incorporation of the `Iterable` type).
This commit stops the template type-checker from inferring template context
types unless strictTemplates is set (and strictInputTypes is not disabled).
Fixes#33527.
PR Close#33537
This commit changes the reporting of watch mode diagnostics for ngtsc to use
the same formatting as non-watch mode diagnostics. This prints rich and
contextual errors even in watch mode, which previously was not the case.
Fixes#32213
PR Close#33862
Previously, the ngtsc compiler attempted to reuse analysis work from the
previous program during an incremental build. To do this, it had to prove
that the work was safe to reuse - that no changes made to the new program
would invalidate the previous analysis.
The implementation of this had a significant design flaw: if the previous
program had errors, the previous analysis would be missing significant
information, and the dependency graph extracted from it would not be
sufficient to determine which files should be re-analyzed to fill in the
gaps. This often meant that the build output after an error was resolved
would be wholly incorrect.
This commit switches ngtsc to take a simpler approach to incremental
rebuilds. Instead of attempting to reuse prior analysis work, the entire
program is re-analyzed with each compilation. This is actually not as
expensive as one might imagine - analysis is a fairly small part of overall
compilation time.
Based on the dependency graph extracted during this analysis, the compiler
then can make accurate decisions on whether to emit specific files. A new
suite of tests is added to validate behavior in the presence of source code
level errors.
This new approach is dramatically simpler than the previous algorithm, and
should always produce correct results for a semantically correct program.s
Fixes#32388Fixes#32214
PR Close#33862
Originally, QueryList implemented Iterable and provided a Symbol.iterator
on its prototype. This caused issues with tree-shaking, so QueryList was
refactored and the Symbol.iterator added in its constructor instead. As
part of this change, QueryList no longer implemented Iterable directly.
Unfortunately, this meant that QueryList was no longer assignable to
Iterable or, consequently, NgIterable. NgIterable is used for NgFor's input,
so this meant that QueryList was not usable (in a type sense) for NgFor
iteration. View Engine's template type checking would not catch this, but
Ivy's did.
As a fix, this commit adds the declaration (but not the implementation) of
the Symbol.iterator function back to QueryList. This has no runtime effect,
so it doesn't affect tree-shaking of QueryList, but it ensures that
QueryList is assignable to NgIterable and thus usable with NgFor.
Fixes#29842
PR Close#33536
Previously, the compiler assumed that all TS files logically within a
project existed under one or more "root directories". If the TS compiler
option `rootDir` or `rootDirs` was set, they would dictate the root
directories in use, otherwise the current directory was used.
Unfortunately this assumption was unfounded - it's common for projects
without explicit `rootDirs` to import from files outside the current
working directory. In such cases the `LogicalProjectStrategy` would attempt
to generate imports into those files, and fail. This would lead to no
`ReferenceEmitStrategy` being able to generate an import, and end in a
compiler assertion failure.
This commit introduces a new strategy to use when there are no `rootDirs`
explicitly present, the `RelativePathStrategy`. It uses simpler, filesystem-
relative paths to generate imports, even to files above the current working
directory.
Fixes#33659Fixes#33562
PR Close#33828
This commit adds the ability to change directories using the compiler's
internal filesystem abstraction. This is a prerequisite for writing tests
which are sensitive to the current working directory.
In addition to supporting the `chdir()` operation, this commit also fixes
`getDefaultLibLocation()` for mock filesystems to not assume `node_modules`
is in the current directory, but to resolve it similarly to how Node does
by progressively looking higher in the directory tree.
PR Close#33828
TNode.inputs are initialised during directives resolution now so we know early
if a node has directives with inputs or no. We don't need to use undefined value
as an indicator that inputs were not resolved yet.
PR Close#33798
Before this change a public name of a directive's input
was stored in 2 places:
- as a key of an object on TNode.index;
- as a value of PropertyAliasValue at the index 1
This PR changes the data structure so the public name is stored
only once as a key on TNode.index. This saves one array entry
for each and every directive input.
PR Close#33798
Adds support for chaining of `styleProp`, `classProp` and `stylePropInterpolateX` instructions whenever possible which should help generate less code. Note that one complication here is for `stylePropInterpolateX` instructions where we have to break into multiple chains if there are other styling instructions inbetween the interpolations which helps maintain the execution order.
PR Close#33837
This refactorings clearly separates the first and subsequent creation execution
of the `template` instruction. This approach has the following benefits:
- it is clear what happens during the first vs. subsequent executions;
- we can avoid several memory reads and checks after the first creation pass
(there is measurable performance improvement on various benchmarks);
- the template instructions becomes smaller and should become a candidate
for optimisations / inlining faster;
PR Close#33856
The ReflectionHost supports enumeration of constructor parameters, and one
piece of information it returns describes the origin of the parameter's
type. Parameter types come in two flavors: local (the type is not imported
from anywhere) or non-local (the type comes via an import).
ngcc incorrectly classified all type parameters as 'local', because in the
source files that ngcc processes the type parameter is a real ts.Identifer.
However, that identifier may still have come from an import and thus might
be non-local.
This commit changes ngcc's ReflectionHost(s) to properly recognize and
report these non-local type references.
Fixes#33677
PR Close#33901
`ng_package` rule has an implicitly optional depedency on terser a48573efe8/packages/bazel/src/ng_package/ng_package.bzl (L36)
When using this rule without terser being available we get the below error;
```
ERROR: /home/circleci/ng/modules/express-engine/BUILD.bazel:22:1: every rule of type ng_package implicitly depends upon the target '@npm//terser/bin:terser', but this target could not be found because of: no such package '@npm//terser/bin': BUILD file not found in directory 'terser/bin' of external repository @npm. Add a BUILD file to a directory to mark it as a package.
ERROR: Analysis of target '//modules/express-engine:npm_package' failed; build aborted: no such package '@npm//terser/bin': BUILD file not found in directory 'terser/bin' of external repository @npm. Add a BUILD file to a directory to mark it as a package.
```
PR Close#33891
Since i18n messages are mapped to `$localize` tagged template strings,
the "raw" version must be properly escaped. Otherwise TS will throw an
error such as:
```
Error: Debug Failure. False expression: Expected argument 'text' to be the normalized (i.e. 'cooked') version of argument 'rawText'.
```
This commit ensures that we properly escape these raw strings before creating
TS AST nodes from them.
PR Close#33820
The `:` char is used as a metadata marker in `$localize` messages.
If this char appears in the metadata it must be escaped, as `\:`.
Previously, although the `:` char was being escaped, the TS AST
being generated was not correct and so it was being output double
escaped, which meant that it appeared in the rendered message.
As of TS 3.6.2 the "raw" string can be specified when creating tagged
template AST nodes, so it is possible to correct this.
PR Close#33820
Ayaz Hafiz
JoostK
ajitsinghkaler
Paul Gschwendtner
crisbeto
Pawel Kozlowski
Alex Rickabaugh
Adam Plumer
Pete Bacon Darwin
Kara Erickson
Greg Magolan
Keen Yee Liau
Andrew Kushnir
Misko Hevery
Jithil P Ponnan
Andrew Scott
Joey Perrott
Keen Yee Liau
ivanwonder
Martin Probst
zuckjet
arturovt
Feliks Khantsis
JiaLiPassion
Danny Skoog
Alan Agius
Igor Minar
Christopher Dahm
Denis Omelkov
Zaid Al-Omari
George Kalpakas
Judy Bogart
horn
Lars Gyrup Brink Nielsen