This commit converts the Backups page in the admin interface
to follow our new admin interface guidelines.
As part of this work, I've also made `AdminPageHeader` and `AdminPageSubheader`
components that can be reused on any admin page for consistency, that handle
the title and action buttons and also breadcrumbs.
Also renamed `AdminPluginFilteredSiteSettings` to `AdminFilteredSiteSettings` since
it can be used generally to show a subset of filtered site settings, not only
settings for a plugin. Not sure if it's ideal to have to define a new route for this
for every config area, but not sure how else to do it right now.
The Listen gem watches recursively, which has a cost per-file on Linux (via rb-inotify). This commit skips a bunch of unnecessary directories to reduce the startup cost.
* System user attachment size WIP
* spec check
* controller update
* add max to system_user_max_attachment_size_kb
* DEV: update to use static method for `max_attachment_size_for_user`
add test to use large image.
add check for failure.
* DEV: update `system_user_max_attachment_size_kb` default value to 0
remove unecessary test.
update tests to reflect the new default value of `system_user_max_attachment_size_kb`
* DEV: update maximum_file_size to check when is an attachment made by a system user
Add tests for when `system_user_max_attachment_size_kb` is over and under the limit
Add test for checking interaction with `max_attachment_size_kb`
* DEV: move `max_attachment_size_for_user` to private methods
* DEV: turn `max_attachment_size_for_user` into a static method
* DEV: typo in test case
* DEV: move max_attachment_size_for_user to private class method
* Revert "DEV: move max_attachment_size_for_user to private class method"
This reverts commit 5d5ae0b715.
---------
Co-authored-by: Gabriel Grubba <gabriel@discourse.org>
This commit fixes a number of bugs in `file_size_restriction` settings and does a little of refactoring to reduce duplicated code in site setting types (the refactoring is necessary to fix one of the bugs).
The bugs in `file_size_restriction` settings that are fixed in this commit:
1. Save/cancel buttons next to a `file_size_restriction` setting are shown upon navigating to the settings page without changes being made to the setting
2. Cancel button that discards changes made to the setting doesn't work
3. Reset button that resets the setting to its default doesn't work
4. Validation error message isn't cleared when resetting/cancelling changes
To repro those bugs, navigate to `/admin/site_settings/category/files` and observe the top 2 settings in the page (`max image size kb` and `max attachment size kb`).
Internal topic: t/134726.
* DEV: Removal of create_post_for_category_and_tag_changes setting
reverting commit: #65f35e1
and adding a migration to remove the setting
ref: t/132320
* DEV: change checks for zeros to check for nils
* DEV: remove create_post_for_category_and_tag_changes migration file
If anything goes wrong, we can always revert back to the previous state.
This commit updates `Demon::Base#start` to call `Discourse.before_fork`
before forking. According to the docs in `mini_racer`, we need to
"Dispose manually of all MiniRacer::Context objects prior to forking".
This commit is motivated by a segmentation fault which we are seeing in
production when killing a daemon process. Backtrace of the core dump
includes traces of `mini_racer` so we think this is the cause. Note that
we are not 100% sure if this will fix the issue.
### Why?
Before, all flags were static. Therefore, they were stored in class variables and serialized by SiteSerializer. Recently, we added an option for admins to add their own flags or disable existing flags. Therefore, the class variable had to be dropped because it was unsafe for a multisite environment. However, it started causing performance problems.
### Solution
When a new Flag system is used, instead of using PostActionType, we can serialize Flags and use fragment cache for performance reasons.
At the same time, we are still supporting deprecated `replace_flags` API call. When it is used, we fall back to the old solution and the admin cannot add custom flags. In a couple of months, we will be able to drop that API function and clean that code properly. However, because it may still be used, redis cache was introduced to improve performance.
To test backward compatibility you can add this code to any plugin
```ruby
replace_flags do |flag_settings|
flag_settings.add(
4,
:inappropriate,
topic_type: true,
notify_type: true,
auto_action_type: true,
)
flag_settings.add(1001, :trolling, topic_type: true, notify_type: true, auto_action_type: true)
end
```
### Why?
Before, all flags were static. Therefore, they were stored in class variables and serialized by SiteSerializer. Recently, we added an option for admins to add their own flags or disable existing flags. Therefore, the class variable had to be dropped because it was unsafe for a multisite environment. However, it started causing performance problems.
### Solution
When a new Flag system is used, instead of using PostActionType, we can serialize Flags and use fragment cache for performance reasons.
At the same time, we are still supporting deprecated `replace_flags` API call. When it is used, we fall back to the old solution and the admin cannot add custom flags. In a couple of months, we will be able to drop that API function and clean that code properly. However, because it may still be used, redis cache was introduced to improve performance.
To test backward compatibility you can add this code to any plugin
```ruby
replace_flags do |flag_settings|
flag_settings.add(
4,
:inappropriate,
topic_type: true,
notify_type: true,
auto_action_type: true,
)
flag_settings.add(1001, :trolling, topic_type: true, notify_type: true, auto_action_type: true)
end
```
This commit continues on work laid out by 6039b513fe to redesign the /about page. In this commit, we add sections for showing the site admins and moderators.
The lists of admins and moderators display the 10 most recently seen admins/moderators, with a button to display the rest of admins or moderators. Admins or moderators that have not logged in to the site in the last year will not be shown. Clicking on an admin's or moderator's name/avatar will show their user card.
This commit adds a `MiniSchedulerLongRunningJobLogger` class which will
poll every 60 seconds for mini_scheduler jobs which are stuck. When it
detects that a job is stuck, it will log a warning message with the
current backtrace of the thread that is executing the job.
Note that for scheduled jobs which are executed at a frequency of less
than 30 minutes, we will log when the job has been executing for 30
minutes.
For scheduled jobs executed at a frequency of less than 2 hours, we will
log when the job has been executing for a duration greater than its
specified frequency.
For scheduled jobs executed at a frequency greater than 2 hours, we will
log as long as the job has been executing for more than 2 hours.
Currently to handle stub topics after merging, there are only options to (1) never delete a stub topic and (2) delete a stub topic after X amount of days. This adds the option to immediately delete a stub topic upon merge.
---------
Co-authored-by: Mark VanLandingham <markvanlan@gmail.com>
Co-authored-by: Renato Atilio <renato@discourse.org>
This commit continues on work laid out by 6039b513fe to redesign the /about page. In this commit, we add the site age and a section on the right hand side to show site activities/statistics such as topics, posts, sign-ups, likes etc.
Admin can create up to 50 custom flags. It is limited for performance reasons.
When the limit is reached "Add button" is disabled and backend is protected by guardian.
This commit patches `Net::HTTP` to reduce the default timeouts of 60
seconds when we are processing a request. There are certain routes in
Discourse which makes external requests and if the proper timeouts are
not set, we risk having the Unicorn master process force restarting the
Unicorn workers once the `30` seconds timeout is reached. This can
potentially become a vector for DoS attacks and this commit is aimed at
reducing the risk here.
* SECURITY: Update default allowed iframes list
Change the default iframe url list to all include 3 slashes.
* SECURITY: limit group tag's name length
Limit the size of a group tag's name to 100 characters.
Internal ref - t/130059
* SECURITY: Improve sanitization of SVGs in Onebox
---------
Co-authored-by: Blake Erickson <o.blakeerickson@gmail.com>
Co-authored-by: Régis Hanol <regis@hanol.fr>
Co-authored-by: David Taylor <david@taylorhq.com>
Followup 4aea12fdcb
In certain config areas (like About) we want to be able
to fetch specific site settings by name. In this case,
sometimes we need to be able to fetch hidden settings,
in cases where a config area is still experimental.
Splitting out a different endpoint for this purpose
allows us to be stricter with what we return for config
areas without affecting the main site settings UI, revealing
hidden settings before they are ready.
The current pluralization rules used by the I18n system in Ruby are
obsolete and don’t follow the official rules available at
unicode.org/cldr/charts/45/supplemental/language_plural_rules.html.
Using https://github.com/ruby-i18n/ruby-cldr, new and updated ones have
been generated.
We have some MF strings that are outputting HTML tags (typically links)
and their attributes are using single quotes. The problem is that with
the current implementation of MessageFormat, single quotes act as an
escaping mechanism for special characters like `{`. This then prevents
from interpolating some variables in the strings.
This patch addresses that issue by using double quotes instead,
restoring the expected behavior.
Form Kit is our new form library/framework for unifying the way forms look across Discourse. The admin config area for the /about page is a new form that isn't currently used, so it makes sense for it to be one of the first forms to be migrated to Form Kit to test the library.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
If only one badge has not been awarded, the rest of the string doesn’t make sense:
> Due to the large number of unmatched entries, only the first 100 are shown:
As we are going to show only 1 anyways.
Previously, we couldn't change the user agent name dynamically for onebox requests. In this commit, a new hidden site setting `onebox_user_agent` is created to override the default user agent value specified in the [initializer](c333e9d6e6/config/initializers/100-onebox_options.rb (L15)).
Co-authored-by: Régis Hanol <regis@hanol.fr>
* FEATURE: Clean up previously logged information after permanently deleting posts
When soft deleteing a topic or post, we will log some details in the
staff log, including the raw content of the post. Before this commit, we
will not clear the information in these records. Therefore, after
permanently deleting the post, `UserHistory` still retains copy of the
permanently deleted post. This is an unexpected behaviour and may raise
some potential legal issues.
This commit adds a behavior that when a post is permanently deleted, the
details column of the `UserHistory` associated with the post will be
overwritten to "(permanently deleted)". At the same time, for permanent
deletion, a new `action_id` is introduced to distinguish it from soft
deletion.
Related meta topic: https://meta.discourse.org/t/introduce-a-way-to-also-permanently-delete-the-sensitive-info-from-the-staff-logs/292546
This commit promotes the new topic bulk action
menu introduced in 89883b2f51
to the main method of bulk selecting and performing
actions on topics. The site setting flag gating this
feature is deleted, and the old bulk select code is
deleted as well.
The new modal shows a loading spinner while operations
are taking place, allows selecting the action from a dropdown
instead of having a 2-step modal flow,
and also supports additional options for some operations, e.g.
allowing Close silently.
Replaces the existing topic map with the experimental-topic-map made by @awesomerobot.
---------
Co-authored-by: awesomerobot <kris.aubuchon@discourse.org>
This commit introduces the foundation for a new design for the /about page that we're currently working on. The current version will remain available and still be the default until we finish the new version and are ready to roll out. To opt into the new version right now, add one or more group to the `experimental_redesigned_about_page_groups` site setting and members in those groups will get the new version.
Internal topic: t/128545.
* FEATURE: Add logging for CustomEmoji
We didn't provide any logs for CustomEmoji before, nor did we record the
person who added any emoji in the database. As a result, the staff had
no way to trace back who added a certain emoji.
This commit adds a new column `user_id` to `custom_emojis` to record the
creator of an emoji. At the same time, a log is added for staff logs to
record who added or deleted a custom emoji.
Usage:
```
@validation="integer"
```
This commit also adds a default for rules. By default a rule will now be `ruleName: {}`, this avoids all the boilerplate in validation-parser.js.
Followup 560e8aff75
The linked commit allowed oneboxing private GitHub PRs,
issues, commits, and so on, but it didn't actually allow
oneboxing the root repo e.g https://github.com/discourse/discourse-reactions
We didn't have an engine for this, we were relying on OpenGraph
tags on the HTML rendering of the page like we do with other
oneboxes.
To fix this, we needed a new github engine for repos specifically.
Also, this commit adds a `data-github-private-repo` attribute to
PR, issue, and repo onebox HTML so we have an indicator of
whether the repo was private, which can be used for theme components
and so on.
Our old group SMTP SSL option was a checkbox,
but this was not ideal because there are actually
3 different ways SSL can be used when sending
SMTP:
* None
* SSL/TLS
* STARTTLS
We got around this before with specific overrides
for Gmail, but it's not flexible enough and now people
want to use other providers. It's best to be clear,
though it is a technical detail. We provide a way
to test the SMTP settings before saving them so there
should be little chance of messing this up.
This commit also converts GroupEmailSettings to a glimmer
component.
Allow admin to create custom flag which requires an additional message.
I decided to rename the old `custom_flag` into `require_message` as it is more descriptive.
This PR introduces FormKit, a component-based form library designed to simplify form creation and management. This library provides a single `Form` component, various field components, controls, validation mechanisms, and customization options. Additionally, it includes helpers to facilitate testing and writing specifications for forms.
1. **Form Component**:
- The main component that encapsulates form logic and structure.
- Yields various utilities like `Field`, `Submit`, `Alert`, etc.
**Example Usage**:
```gjs
import Form from "discourse/form";
<template>
<Form as |form|>
<form.Field
@name="username"
@title="Username"
@validation="required"
as |field|
>
<field.Input />
</form.Field>
<form.Field @name="age" @title="Age" as |field|>
<field.Input @type="number" />
</form.Field>
<form.Submit />
</Form>
</template>
```
2. **Validation**:
- Built-in validation rules such as `required`, `number`, `length`, and `url`.
- Custom validation callbacks for more complex validation logic.
**Example Usage**:
```javascript
validateUsername(name, value, data, { addError }) {
if (data.bar / 2 === value) {
addError(name, "That's not how maths work.");
}
}
```
```hbs
<form.Field @name="username" @validate={{this.validateUsername}} />
```
3. **Customization**:
- Plugin outlets for extending form functionality.
- Styling capabilities through propagated attributes.
- Custom controls with properties provided by `form` and `field`.
**Example Usage**:
```hbs
<Form class="my-form" as |form|>
<form.Field class="my-field" as |field|>
<MyCustomControl id={{field.id}} @onChange={{field.set}} />
</form.Field>
</Form>
```
4. **Helpers for Testing**:
- Test assertions for form and field validation.
**Example usage**:
```javascript
assert.form().hasErrors("the form shows errors");
assert.form().field("foo").hasValue("bar", "user has set the value");
```
- Helper for interacting with he form
**Example usage**:
```javascript
await formKit().field("foo").fillIn("bar");
```
5. **Page Object for System Specs**:
- Page objects for interacting with forms in system specs.
- Methods for submitting forms, checking alerts, and interacting with fields.
**Example Usage**:
```ruby
form = PageObjects::Components::FormKit.new(".my-form")
form.submit
expect(form).to have_an_alert("message")
```
**Field Interactions**:
```ruby
field = form.field("foo")
expect(field).to have_value("bar")
field.fill_in("bar")
```
6. **Collections handling**:
- A specific component to handle array of objects
**Example Usage**:
```gjs
<Form @data={{hash foo=(array (hash bar=1) (hash bar=2))}} as |form|>
<form.Collection @name="foo" as |collection|>
<collection.Field @name="bar" @title="Bar" as |field|>
<field.Input />
</collection.Field>
</form.Collection>
</Form>
```
Previously, we did not log any topic slow mode changes. This allowed
some malicious (or just careless) TL4 users to delete slow modes created
by moderators at will. Administrators could not see who changed the slow
mode unless they had SQL knowledge and used Data Explorer.
This commit enables logging who turns slow mode on, off, or changes it.
Related meta topic: https://meta.discourse.org/t/why-is-there-no-record-of-who-added-or-removed-slow-mode/316354
Hungarian actually has a plural form (See: https://meta.discourse.org/t/issue-with-pluralized-count-translation-override/316019/8)
In a past commit we introduced an external JS library to describe the
plural form of the language. (301713ef96)
But this JS library actually has a slightly different pluralization
definition than what we use in the backend (plurals.rb). ruby-i18n
incorrectly assumes that Hungarian does not have plural forms.
This resulted in singular text being used on the front end for
Hungarian, but admins were unable to find and edit the singular text in
customization.
This commit adds a singular definition for Hungarian to the backend,
compatible with the "make-plural/cardinals" library, thus fixing the
above issue.
Originally in 964da21817
we hid the SMTPAuthenticationError message except in
very specific cases. However this message often contains
helpful information from the mail provider, for example
here is a response from Office365:
> 535 5.7.139 Authentication unsuccessful, user is locked by your
organization's security defaults policy. Contact your administrator.
So, we will show the error message in the modal UI instead
of supressing it with a generic message to be more helpful.
`after_commit` should be used before refreshing processes to be sure that the database is already updated.
Also, MessageBus is used instead of events as MessageBus works correctly with many processes;
The OutOfDateThemes problem check is using an old method of setting the message, by overriding #message. It should instead use #translation_keys. (By chance I noticed the same thing applies to UnreachableThemes.
Followup 560e8aff75
GitHub auth tokens cannot be made with permissions to
access multiple organisations. This is quite limiting.
This commit changes the site setting to be a "secret list"
type, which allows for a key/value mapping where the value
is treated like a password in the UI.
Now when a GitHub URL is requested for oneboxing, the
org name from the URL is used to determine which token
to use for the request.
Just in case anyone used the old site setting already,
there is a migration to create a `default` entry
with that token in the new list setting, and for
a period of time we will consider that token valid to
use for all GitHub oneboxes as well.
Allow admin to create custom flag which requires an additional message.
I decided to rename the old `custom_flag` into `require_message` as it is more descriptive.
Before Rails 7.1, the `config.i18n.raise_on_missing_translations` option
was raising only in controllers and views, now it’s anywhere in the app.
It means it raises each time `#description` is called for a setting that
is missing a proper description (and we have a ton of them). Most of the
time it’s fine, as those are usually settings that aren’t shown to the
user.
We can’t just let the code blow up every time there’s a setting with a
missing description, that’s why it’s currently returning an empty
string when the translation is missing.
However, this silently broke our I18n integrity spec that was relying on
the old “Translation missing” message to detect missing translations.
This patch addresses this issue by checking the description isn’t an
empty string. It caught a missing translation by the way.
This change how we present attachments from incoming emails to now be "hidden" in a "[details]" so they don't "hang" at the end of the post.
This is especially useful when using Discourse as a support tool where email is the main communication channel. For various reasons, images are often duplicated by email user agents, and hiding them behind the details block help keep the conversation focused on the isssue at hand.
Internal ref t/122333
This commit adds the ability to onebox private GitHub
commits, pull requests, issues, blobs, and actions using
a new `github_onebox_access_token` site setting. The token
must be set up in correctly to have access to the repos needed.
To do this successfully with the Oneboxer, we need to skip
redirects on the github.com host, otherwise we get a 404
on the URL before it is translated into a GitHub API URL
and has the appropriate headers added.
Followup 3ff7ce78e7
Basing this setting on referrer was too brittle --
the referrer header can easily be ommitted or changed.
Instead, for the small amount of use cases that this
site setting serves, we can use a group-based setting
instead, changing it to `cross_origin_opener_unsafe_none_groups`
instead.
Adds a report to show the top 100 most viewed topics in a date range,
combining logged in and anonymous views. Can be filtered by category.
This is a followup to 527f02e99f
and d1191b7f5f. We are also going to
be able to see this data in a new topic map, but this admin report
helps to see an overview across the forum for a date range.
This commit adds a hidden `s3_inventory_bucket_region` site setting to
specify the region of the `s3_inventory_bucket` when the `S3Inventory`
class initializes an instance of the `S3Helper`. By default, the
`S3Helper` class uses the value of the `s3_region` site setting but the
region of the `s3_inventory_bucket` is not always the same as the
`s3_region` configured.
This site setting has always been experimental and hidden since it was
added 7 years ago. Drop it to simplify the way we enable logging in a
logstash friendly way.
This commit updates the `101-lograge` initializer to unsubscribe from
log events logged by `ActionView::LogSubscriber`. This is what the `lograge`
gem has been doing but its implementation is not compatible with Rails
7.1 and we started getting noise in our logs when lograge is enabled.
Background:
In order to redrive failed webhook events, an operator has to go through and click on each. This PR is adding a mechanism to retry all failed events to help resolve issues quickly once the underlying failure has been resolved.
What is the change?:
Previously, we had to redeliver each webhook event. This merge is adding a 'Redeliver Failed' button next to the webhook event filter to redeliver all failed events. If there is no failed webhook events to redeliver, 'Redeliver Failed' gets disabled. If you click it, a window pops up to confirm the operator. Failed webhook events will be added to the queue and webhook event list will show the redelivering progress. Every minute, a job will be ran to go through 20 events to redeliver. Every hour, a job will cleanup the redelivering events which have been stored more than 8 hours.
Adds experimental_flags_admin_page_enabled_groups (default "")
to remove the Moderation Flags link from the admin sidebar for now,
there are still a few bugfixes that need to be done before we
are comfortable with turning this on more widely. This is
a _temporary_ flag, we will be removing this once the feature
is more stable.
This commit monkey patches `Rails::Rack::Logger` to not log reqeust
information like `Started GET "/service-worker.js" for 127.0.0.1 at 2024-07-05 15:28:12 +0800`
when lograge is enabled. This was previously excluded by a monkey patch
in the `lograge` gem but that monkey patch has since broke and the gem
is unmaintained.
This commit rewrites `DiscourseLogstashLogger` to not be an instance
of `LogstashLogger`. The reason we don't want it to be an instance of
`LogstashLogger` is because we want the new logger to be chained to
Logster's logger which can then pass down useful information like the
request's env and error backtraces which Logster has already gathered.
Note that this commit does not bother to maintain backwards
compatibility and drops the `LOGSTASH_URI` and `UNICORN_LOGSTASH_URI`
ENV variables which were previously used to configure the destination in
which `logstash-logger` would send the logs to. Instead, we introduce
the `ENABLE_LOGSTASH_LOGGER` ENV variable to replace both ENV and remove
the need for the log paths to be specified. Note that the previous
feature was considered experimental as stated in d888d3c54c
and the new feature should be considered experimental as well. The code
may be moved into a plugin in the future.
The "migration to Glimmer" has been broken out here from #27155 to make the review process less onerous and reduce change risk:
* DEV: migrates most of the widget code to Glimmer in prep for IRV additions
* NB This already incorporates significant amounts of review and feedback from the prior PR.
* NB because there was significant additional feedback relating to older Poll code that I've improved with feedback, there are some additional changes here that are general improvements to the plugin and not specific to IRV nor Glimmer!
* There should be no trace of IRV code here.
Once this is finalised and merged we can continue to progress with #27155.
Followup 2f2da72747
This commit moves topic view tracking from happening
every time a Topic is requested, which is susceptible
to inflating numbers of views from web crawlers, to
our request tracker middleware.
In this new location, topic views are only tracked when
the following headers are sent:
* HTTP_DISCOURSE_TRACK_VIEW - This is sent on every page navigation when
clicking around the ember app. We count these as browser page views
because we know it comes from the AJAX call in our app. The topic ID
is extracted from HTTP_DISCOURSE_TRACK_VIEW_TOPIC_ID
* HTTP_DISCOURSE_DEFERRED_TRACK_VIEW - Sent when MessageBus initializes
after first loading the page to count the initial page load view. The
topic ID is extracted from HTTP_DISCOURSE_DEFERRED_TRACK_VIEW.
This will bring topic views more in line with the change we
made to page views in the referenced commit and result in
more realistic topic view counts.
I am changing many of these to notes or resolving them as is,
most of these I have not actively worked on in years so someone
else can work on them when we get to these areas again.
This commit continues work laid out by ffec8163b0 for the admin config page for the /about page. The last commit set up the user interface, and this one sets up all the wiring needed to make the input fields and save buttons actually work.
Internal topic: t/128544.
We want to allow admins to make new required fields apply to existing users. In order for this to work we need to have a way to make those users fill up the fields on their next page load. This is very similar to how adding a 2FA requirement post-fact works. Users will be redirected to a page where they can fill up the remaining required fields, and until they do that they won't be able to do anything else.
Adds a checkbox to filter untranslated text strings in the admin UI, behind a hidden and default `false` site setting `admin_allow_filter_untranslated_text`.
* DEV: Upgrade Rails to 7.1
* FIX: Remove references to `Rails.logger.chained`
`Rails.logger.chained` was provided by Logster before Rails 7.1
introduced their broadcast logger. Now all the loggers are added to
`Rails.logger.broadcasts`.
Some code in our initializers was still using `chained` instead of
`broadcasts`.
* DEV: Make parameters optional to all FakeLogger methods
* FIX: Set `override_level` on Logster loggers (#27519)
A followup to f595d599dd
* FIX: Don’t duplicate Rack response
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
This ensures that the theme id is resolved as early as possible in the
request cycle. This is necessary for the custom homepage to skip
preloading the wrong data.
* DEV: Upgrade Rails to 7.1
* FIX: Remove references to `Rails.logger.chained`
`Rails.logger.chained` was provided by Logster before Rails 7.1
introduced their broadcast logger. Now all the loggers are added to
`Rails.logger.broadcasts`.
Some code in our initializers was still using `chained` instead of
`broadcasts`.
* DEV: Make parameters optional to all FakeLogger methods
* FIX: Set `override_level` on Logster loggers (#27519)
A followup to f595d599dd
* FIX: Don’t duplicate Rack response
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Many site settings can be distructive or have huge side-effects
for a site that the admin may not be aware of when changing it.
This commit introduces a `requires_confirmation` attribute that
can be added to any site setting. When it is true, a confirmation
dialog will open if that setting is changed in the admin UI,
optionally with a custom message that is defined in client.en.yml.
If the admin does not confirm, we reset the setting to its previous
clean value and do not save the new value.
Some tooling may rely on an unsafe-none cross origin opener policy to work. This change adds a hidden site setting that can be used to list referrers where we add this header instead of the default one configured in cross_origin_opener_policy_header.
A new admin setting called `enforce_second_factor_on_external_auth`. It allows users to authenticate using external providers even when 2FA is forced with `enforce_second_factor` site setting.
* Revert "FIX: Set `override_level` on Logster loggers (#27519)"
This reverts commit c1b0488c54.
* Revert "DEV: Make parameters optional to all FakeLogger methods"
This reverts commit 3318dad7b4.
* Revert "FIX: Remove references to `Rails.logger.chained`"
This reverts commit f595d599dd.
* Revert "DEV: Upgrade Rails to 7.1"
This reverts commit 081b00391e.
made explicit in description that ` default_sidebar_switch_panel_position` admin setting is about the position of the button on the sidebar for switching to chat.
`Rails.logger.chained` was provided by Logster before Rails 7.1
introduced their broadcast logger. Now all the loggers are added to
`Rails.logger.broadcasts`.
Some code in our initializers was still using `chained` instead of
`broadcasts`.
* Load search results in displayed order so that when more categories are loaded on scroll, they appear at the end,
* Limit the number of subcategories that are shown per category and display 'show more' links,
This commit adds ability to fetch a subset of site settings from the `/admin/site_settings` endpoint so that it can be used in all places where the client app needs access to a subset of the site settings.
Additionally, this commit also introduces a new service class called `UpdateSiteSetting` that encapsulates all the logic that surrounds updating a site setting so that it can be used to update site setting(s) anywhere in the backend. This service comes in handy with, for example, the controller for the flags admin config area which may need to update some site settings related to flags.
Internal topic: t/130713.
This commits introduces the `sidekiq_report_long_running_jobs_minutes`
global setting which allows a site administrator to log a warning in the
Rails log when a Sidekiq job has been running for too long.
The warning is logged with the backtrace of the thread that is
processing the Sidekiq job to make it easier to figure out what a
sidekiq job is stuck on.
This commit introduces a hidden `s3_inventory_bucket` site setting which
replaces the `enable_s3_inventory` and `s3_configure_inventory_policy`
site setting.
The reason `enable_s3_inventory` and `s3_configure_inventory_policy`
site settings are removed is because this feature has technically been
broken since it was introduced. When the `enable_s3_inventory` feature
is turned on, the app will because configure a daily inventory policy for the
`s3_upload_bucket` bucket and store the inventories under a prefix in
the bucket. The problem here is that once the inventories are created,
there is nothing cleaning up all these inventories so whoever that has
enabled this feature would have been paying the cost of storing a whole
bunch of inventory files which are never used. Given that we have not
received any complains about inventory files inflating S3 storage costs,
we think that it is very likely that this feature is no longer being
used and we are looking to drop support for this feature in the not too
distance future.
For now, we will still support a hidden `s3_inventory_bucket` site
setting which site administrators can configure via the
`DISCOURSE_S3_INVENTORY_BUCKET` env.
* FEATURE: Add Filter for Webhook Events by Status
* Fixing multiple issues
* Lint
* Fixing multiple issues
* Change the range of the status for webhook events
This commit introduces the initial UI for the admin config area for the /about page. The UI isn't wired and doesn't do anything yet, but we're going to iterate on it in future commits.
Internal topic: t/128544.
Followup 0434112aa7,
when I introduced the pluralisation for the
password.too_short message I didn't change the
key name to `count`, which is necessary.
This commit includes various UX improvements to the reset
password page:
* Introduce a `hide-application-header-buttons` helper to do the following:
* Hide Sign Up and Log In buttons, they are not necessary on this flow
* Hide the sidebar, it is a distraction on this flow
* Improve messaging when a 2FA confirmation is required first
* Improve display of server-side ActiveRecord model validation errors
in password form, e.g. instead of "is the same as your current password"
we do "The password is the same as your current password"
* Move password tip to next line below input and move caps lock hint
inline with Show/Hide password toggle
* Add system specs for 2FA flow on reset password page
* Fixes a computed property conflict issue on the password reset
page when toggling 2FA methods
Continued work on moderate flags UI.
In this PR admins are allowed to change the order of flags. The notify user flag is always on top but all other flags can be moved.
This makes it more obvious what's happening, and makes it much less likely that users will send repeated reset emails (and thereby hit the rate limit)
Followup to e97ef7e9af
This commit adds the ability for site administrators to mark users'
passwords as expired. Note that this commit does not add any client side
interface to mark a user's password as expired.
The following changes are introduced in this commit:
1. Adds a `user_passwords` table and `UserPassword` model. While the
`user_passwords` table is currently used to only store expired
passwords, it will be used in the future to store a user's current
password as well.
2. Adds a `UserPasswordExpirer.expire_user_password` method which can
be used from the Rails console to mark a user's password as expired.
3. Updates `SessionsController#create` to check that the user's current
password has not been marked as expired after confirming the
password. If the password is determined to be expired based on the
existence of a `UserPassword` record with the `password_expired_at`
column set, we will not log the user in and will display a password
expired notice. A forgot password email is automatically send out to
the user as well.
This commit removes the `/admin-revamp` routes which were introduced as a part of an experiment to revamp the admin pages. We still want to improve the admin/staff experience, but we're going to do them within the existing `/admin` routes instead of introducing a completely new route.
Our initial efforts to improve the Discourse admin experience is this commit which introduces the foundation for a new subroute `/admin/config` which will house various new pages for configuring Discourse. The first new page (or "config area") will be `/admin/config/about` that will house all the settings and controls for configuring the `/about` page of Discourse.
Internal topic: t/128544
This commit introduces the following changes:
1. Introduce the `SignalTrapLogger` singleton which starts a single
thread that polls a queue to log messages with the specified logger.
This thread is necessary becasue most loggers cannot be used inside
the `Signal.trap` context as they rely on mutexes which are not
allowed within the context.
2. Moves the monkey patch in `freedom_patches/unicorn_http_server_patch.rb` to
`config/unicorn.config.rb` which is already monkey patching
`Unicorn::HttpServer`.
3. `Unicorn::HttpServer` will now automatically send a `USR2` signal to
a unicorn worker 2 seconds before the worker is timed out by the
Unicorn master.
4. When a Unicorn worker receives a `USR2` signal, it will now log only
the main thread's backtraces to `Rails.logger`. Previously, it was
`put`ing the backtraces to `STDOUT` which most people wouldn't read.
Logging it via `Rails.logger` will make the backtraces easily
accessible via `/logs`.
This commit re-introduces the "Move to Inbox" and "Move to Archive"
bulk topic actions, which we had in the old modal but had not yet added
to the new "experimental" dropdown, which isn't really experimental at
this point.
Once this is merged we can remove the old modal and only
rely on the new dropdown.
This adds a small indicator of the Ctrl+/ shortcut that
exists for the admin sidebar filter, since it's not very
obvious that you can do that. This should help people
who are struggling with the long list of links -- it's
much faster to use the keyboard and search for what
you are looking for.
This commit updates all Sidekiq signal handling event logs to go through
Unicorn's logger instead of logging to STDOUT. Going through a proper logger
means the log messages are logged in the format which the logger has configured.
This means we get proper timestamp for the log messages.
This commit updates various spots in `config/unicorn.conf.rb` which were
doing `STDERR.puts` to either use `server.logger` which is unicorn's
logger or `Rails.logger` which is Rails' logger. The reason we want to
do so is because `STDERR.puts` doesn't format the logs properly and is a
problem especially when custom loggers with structured formatting is
enabled.
This gives us daily fidelity of topic view stats
New table stores a row per topic viewed per day tracking
anonymous and logged on views
We also have a new endpoint `/t/ID/views-stats.json` to get the statistics for the topic.
This commit adds a `DISCOURSE_DUMP_BACKTRACES_ON_UNICORN_WORKER_TIMEOUT`
environment that will allow us to dump all backtraces for all threads of
a Unicorn worker 2 seconds before it times out. In development,
backtraces are dumped to `STDOUT` and in production we will dump it to
`unicorn.stdout.log`.
We want to dump all the backtraces to make it easier to identify the
cause of a Unicorn worker timing out.
* FIX: When creating new message via URL do not redirect
If a user clicks on `/new-message` route from inside the instance we're
redirecting the user to `/latest` page which is only intended if the
user is coming from an external site. This commit checks for this
condition and only redirects when user is coming from external source.
This also makes the behavior consistent with `new-topic` route.
Internal topic reference: `/t/-/129523/`
* FEATURE: add agree and edit
adds agree and edit - an alias for agree and keep -- but with a client action to
edit the post in the composer before the flag is agreed with
---------
Co-authored-by: Juan David Martinez <juan@discourse.org>
We're planning to implement a feature that allows adding required fields for existing users. This PR does some preparatory refactoring to make that possible. There should be no changes to existing behaviour. Just a small update to the admin UI.
For plugins with only an "enabled" site setting, it doesn't
make sense to take them to the site settings page, since the
toggle switch in the list can be used to change enabled/disabled.
This will not be the case for plugins that have their own custom
config page (like Automation), but we will deal with this when
we actually overhaul this plugin to use the new show page.
Also adds another rspec fixture of a test plugin.
This PR introduces a basic AdminNotice model to store these notices. Admin notices are categorized by their source/type (currently only notices from problem check.) They also have a priority.
This PR aims to add bulk actions to the user's bookmarks.
After this feature, all users should be able to select multiple bookmarks and perform the actions of "deleting" or "clear reminders"
Instead of creating two separate Topics when a user (1) requests to join a group and (2) gets accepted in, this makes the acceptance message into a Post under the origin group request Topic.
(experimental)
The initial implementation of glimmer topic-list and related components. Does not include new APIs and isn't compatible with existing customization. That's gonna come in future PRs.
Enabled by adding groups to `experimental_glimmer_topic_list_groups` setting.
Using the CategoryDrop on the categories page redirected the user to the
"latest topics" page with topics only from that category. With these
changes, selecting a category will take the user to a "subcategories
page" where only the subcategories of the selected property will be
displayed.
This commit adds a different message to the users directory (`/u`) that's shown when there are no results for the search term instead of showing the one for when there are no users on the site yet.
Internal topic: t/126076.
Per https://developers.google.com/search/docs/crawling-indexing/overview-google-crawlers
> GoogleOther is the generic crawler that may be used by various product teams for fetching publicly accessible content from sites. For example, it may be used for one-off crawls for internal research and development.
This commit will ensure it's served the crawler view, and included in crawler metrics
This commit changes request method for "categories/search" from GET to
POST to make sure that long filters can be passed to the server. For
example, category selectors with many categories are setting the full
list of selected category IDs to ensure these are filtered out from the
list of choices. This can result in a long URL that exceeds the maximum
length.
The watched word group's create, update and delete action logs were missing the translations. This PR will add those strings and will use the group key instead of watched word key where needed.
This commit switches `DiscourseIpInfo.mmdb_download` to use the
permalinks supplied by MaxMind to download the MaxMind databases as
specified in
https://dev.maxmind.com/geoip/updating-databases#directly-downloading-databases
which states:
```
To directly download databases, follow these steps:
1. In the "Download Links" column, click "Get Permalink(s)" for the desired database.
2. Copy the permalink(s) provided in the modal window.
3. Provide your account ID and your license key using Basic Authentication to authenticate.
```
Previously we are downloading from `https://download.maxmind.com/app/geoip_download` but this is not
documented anyway on MaxMind's docs so this URL can in theory break
in the future without warning. Therefore, we are taking a proactive
approach to download the databases from MaxMind the recommended way
instead of relying on a hidden URL. This old way of downloading the
databases with only a license key will be deprecated in 3.3 and be
removed in 3.4.
This keeps coming up in user testing as something
we want to get rid of. The `navigation_menu` setting
has been set to sidebar by default for some time now,
and we are rolling out admin sidebar widely. It just
doesn't make sense to let people turn this off in
the first step of the wizard -- we _want_ people to
use the sidebar.
At the moment, there is no way to create a group of related watched words together. If a user needed a set of words to be created together, they'll have to create them individually one at a time.
This change attempts to allow related watched words to be created as a group. The idea here is to have a list of words be tied together via a common `WatchedWordGroup` record. Given a list of words, a `WatchedWordGroup` record is created and assigned to each `WatchedWord` record. The existing WatchedWord creation behaviour remains largely unchanged.
Co-authored-by: Selase Krakani <skrakani@gmail.com>
Co-authored-by: Martin Brennan <martin@discourse.org>
This commit introduces a few changes as a result of
customer issues with finding why a topic was relisted.
In one case, if a user edited the OP of a topic that was
unlisted and hidden because of too many flags, the topic
would get relisted by directly changing topic.visible,
instead of going via TopicStatusUpdater.
To improve tracking we:
* Introduce a visibility_reason_id to topic which functions
in a similar way to hidden_reason_id on post, this column is
set from the various places we change topic visibility
* Fix Post#unhide! which was directly modifying topic.visible,
instead we use TopicStatusUpdater which sets visibility_reason_id
and also makes a small action post
* Show the reason topic visibility changed when hovering the
unlisted icon in topic status on topic titles
Martin Brennan
David Taylor
Guhyoun Nam
Osama Sayegh
Gabriel Grubba
Discourse Translator Bot
Alan Guo Xiang Tan
Krzysztof Kotlarek
Jan Cernik
Loïc Guitaut
Penar Musaraj
Kris
carson chang
Sérgio Saquetim
Blake Erickson
Joffrey JAFFEUX
Natalie Tay
Ted Johansson
David McClure
Vinoth Kannan
锦心
chapoi
Amanda Alves Branquinho
Keegan George
moin-Jana
Régis Hanol
Robert
Arpit Jalan
Ella E
Renato Atilio
Kelv
Rafael dos Santos Silva
Jarek Radosz
Tobias Eigen
Daniel Waterworth
Sam
Jeff Wong
benj
Isaac Janzen
Jean
Bianca Nenciu
SaraDev
Neil Lalonde
Charley Sheets