This patch removes the need for the styleSanitizer() instruction in
favor of passing the sanitizer into directly into the styleProp
instruction.
This patch also increases the binding index size for all style/class bindings in preparation for #34418
PR Close#34480
In #28162 we introduced an extra `removeNode` call for host elements which can cause the parent element to be removed before all child animations have finished. The issue is only in Ivy, because that the only place where we pass in the `isHostElement` flag. These changes fix the issue by not re-triggering the removal logic if the element has in-progress animations.
Fixes#33597.
PR Close#34702
Before ivy it was possible to configure a mutable service value
in an application initializer (by providing an `APP_INITIALIZER`)
that could be read in the provider of `LOCALE_ID`. This is a common
scenario if you wanted to load the locale id asynchronously from
an HTTP request for instance.
When using the ivy, the runtime needs to be told what the current
locale is, which is done by calling the `setLocaleId()` function with
the value injected by the `LOCALE_ID` token. Previously this was
being done before the application initializers were run, which meant
that the `LOCALE_ID` provider was being executed before the
app initializers had a chance to get a new value for it.
Now this initalization of the locale for the ivy runtime is done after the
application initializers have been run.
Closes#34701
PR Close#34830
remove unnecessary underscore suffix and the corresponding TODO comments,
because the rollup bug was fixed: github.com/rollup/rollup/issues/2047
PR Close#34757
Typescript 3.7 now emits d.ts files for getters differently than prior versions,
and there seems to be a bug in how it strips private types without replacing them
with explicit 'any' type. This then leads to compilation failures in projects compiled
against our packages that don't have skipLibCheck turned on but do have strict or
noImplicitAny check on.
I'm working around this by marking the affected getters as @internal and
adding a test to prevent future regressions.
I believe this is a TypeScript bug, and I filed a bug report:
https://github.com/microsoft/TypeScript/issues/36216
PR Close#34798
This brings in a few minor fixes including a better way to patch require for bootstrap scripts
Also remove install_source_map_support attribute from nodejs_binary targets This attribute will be removed from nodejs_binary in the future
PR Close#34736
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
Currently ngtsc looks for the first `ConstructorDeclaration` when figuring out what the parameters are so that it can generate the DI instructions. The problem is that if a constructor has overloads, it'll have several `ConstructorDeclaration` members with a different number of parameters. These changes tweak the logic so it looks for the constructor implementation.
PR Close#34590
DebugElement.query also matches elements that may have been created
outside of Angular (ex: with `document.appendChild`). If those matched
DebugElements are in turn used to query for more elements, an error
occurs because the first step in queryAll is to load the LContext.
PR Close#34687
Default currency code in CurrencyPipe is currently hardcoded to USD
and is not configurable. This commit allows the default currency code
to be configurable by adding a DEFAULT_CURRENCY_CODE injection token.
Example:
```
providers: [{ provide: DEFAULT_CURRENCY_CODE, useValue: "GBP" }]
...
{{ 123.45 | currency }} // outputs £123.45 as opposed to always $123.45 before
```
Closes: #25461
PR Close#32584
Unlike in View Engine, we currently reset the dirty state of
components in the check no changes change detection cycle.
This means that components cannot be marked as dirty from
view lifecycle hooks because the dirty state is reset and
the lifecycle hooks do not run in the check no changes CD cycle.
PR Close#34495
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
A while ago we made a pass through all instructions to make sure that none of them call directly into other instructions, however it seems like missed the `pipeBind*` since they still call into the pure functions. The result is that we have some unnecessary duplicated accesses of global state like `getLView` which are called twice in a row with nothing changing.
These changes move the common functionality into a shared file and make the pipe instructions call into them with the global state instead.
PR Close#33714
This commit improves `ExpressionChangedAfterChecked` error message for attributes by including attribute name and the content of the entire expression that contains interpolation(s). In order to achieve that, metadata is now stored in `TData` array when `attribute` and `attributeInterpolate` instructions are being called (similar to `property` and `propertyInterpolate` instructions).
PR Close#34505
Fixes classes with trailing or leading space that are passed to `ngClass` (e.g. `{'foo ': bar}`) not being applied in Ivy. The issue comes from the fact that when the styling differ builds up the style map it uses the trimmed key to look up the value in the map that uses non-trimmed keys.
Fixes#34476.
PR Close#34539
Follow-up from [this discussion](https://github.com/angular/angular/pull/33419#discussion_r339296216). In Ivy we don't use the schema to validate tag names, but instead we use feature detection to figure out whether an element is supported. While this should generally be more accurate, it'll also end up throwing for some more innocent cases. E.g. now Ivy throws an error for `main` elements in IE which is accurate since IE doesn't support the element, but is annoying since there is no functionality attached.
These changes switch to logging a warning instead, similarly to what we're doing for unknown properties.
PR Close#34524
The `getProjectAsAttrValue` in `node_selector_matcher` finds the
ProjectAs marker and then additionally checks that the marker appears in
an even index of the node attributes because "attribute names are stored
at even indexes". This is true for "regular" attribute bindings but
classes, styles, bindings, templates, and i18n do not necessarily follow
this rule because there can be an uneven number of them, causing the
next "special" attribute "name" to appear at an odd index. To address
this issue, ensure ngProjectAs is placed right after "regular"
attributes.
PR Close#34617
Prior to this commit, there were no `advance` instructions generated before `i18nExp` instructions and as a result, lifecycle hooks for components used inside i18n blocks were flushed too late. This commit adds the logic to generate `advance` instructions in front of `i18nExp` ones (similar to what we have in other places like interpolations, property bindings, etc), so that the necessary lifecycle hooks are flushed before expression value is captured.
PR Close#34436
The main logic of the `InheritDefinitionFeature` is to go through the prototype chain of a given Component and merge all Angular-specific information onto that Component def. The problem happens in case there is a Component in a hierarchy that also contains the `InheritDefinitionFeature` (i.e. it extends some other Component), so it inherits all Angular-specific information from its super class. As a result, the root Component may end up having duplicate information inherited from different Components in hierarchy.
Let's consider the following structure: `GrandChild` extends `Child` that extends `Base` and the `Base` class has a `HostListener`. In this scenario `GrandChild` and `Child` will have `InheritDefinitionFeature` included into the `features` list. The processing will happend in the following order:
- `Child` inherits `HostListener` from the `Base` class
- `GrandChild` inherits `HostListener` from the `Child` class
- since `Child` has a parent, `GrandChild` also inherits from the `Base` class
The result is that the `GrandChild` def has duplicated host listener, which is not correct.
This commit introduces additional logic that checks whether we came across a def that has `InheritDefinitionFeature` feature (which means that this def already inherited information from its super classes). If that's the case, we skip further fields-related inheritance logic, but keep going though the prototype chain to look for super classes that contain other features (like NgOnChanges), that we need to invoke for a given Component def.
PR Close#34244
Fixes an error that is thrown when a provider is overridden in `TestBed`, if the module definition of one of the imported modules uses a function for the `imports` that is set via `setNgModuleScope`. The problem was that we have a `for...of` loop that assumes that the imports are an array, but they can also be a function. This was handled correctly in other places, but this one was missed.
Note that the above-mentioned error is only thrown at runtime when the code is transpiled to es6. In es5 TS generates a call to a helper that handles the error silently so the attached unit test only fails in es6.
Fixes#34623.
PR Close#34629
Prior to this change, the ExpressionChangedAfterChecked error thrown in Ivy was missing useful information that was available in View Engine, specifically: missing property name for proprty bindings and also the content of the entire property interpolation (only a changed value was displayed) if one of expressions was changed unexpectedly. This commit improves the error message by including the mentioned information into the error text.
PR Close#34381
The ordering matters because we don't currently throw if multiple
configurations are provided (i.e. provider has *both* useExisting and
useFactory). We should actually throw an error in this case, but to
avoid another breaking change in v9, this PR simply aligns the Ivy
behavior with ViewEngine.
PR Close#34433
Currently we only run Saucelabs on PRs using the legacy View Engine
build. Switching that build to Ivy is not trivial and there are various
options:
1. Updating the R3 switches to use POST_R3 by default. At first glance,
this doesn't look easy because the current ngtsc switch logic seems to
be unidirectional (only PRE_R3 to POST_R3).
2. Updating the legacy setup to run with Ivy. This sounds like the easiest
solution at first.. but it turns out to be way more complicated. Packages
would need to be built with ngtsc using legacy tools (i.e. first building
the compiler-cli; and then building packages) and View Engine only tests
would need to be determined and filtered out. Basically it will result in
re-auditing all test targets. This is contradictory to the fact that we have
this information in Bazel already.
3. Creating a new job that runs tests on Saucelabs with Bazel. We specify
fine-grained test targets that should run. This would be a good start
(e.g. acceptance tests) and also would mean that we do not continue maintaining
the legacy setup..
This commit implements the third option as it allows us to move forward
with the general Bazel migration. We don't want to spend too much time
on our legacy setup since it will be removed anyway in the future.
PR Close#34277
When we log DI errors we get the name of the provider via `SomeClass.name`. In IE functions that inherit from other functions don't have their own `name`, but they take the `name` from the lowest parent in the chain, before `Function`. I've added some changes to fall back to parsing out the function name from the function's string form.
PR Close#34305
The way definitions are added in JIT mode is through `Object.defineProperty`, but the problem is that in IE10 properties defined through `defineProperty` won't be inherited which means that inheriting injectable definitions no longer works. These changes add a workaround only for JIT mode where we define a fallback method for retrieving the definition. This isn't ideal, but it should only be required until v10 where we'll no longer support inheriting injectable definitions from undecorated classes.
PR Close#34305
In JIT mode we use `__proto__` when reading constructor parameter metadata, however it's not supported on IE10. These changes switch to using `Object.getPrototypeOf` instead.
PR Close#34305
We've got some tests that assert that the generate DOM looks correct. The problem is that IE changes the attribute order in `innerHTML` which caused the tests to fail. I've reworked the relevant tests not to assert directly against `innerHTML`.
PR Close#34305
We have a couple of cases where we use something like `typeof Node === 'function'` to figure out whether we're in a worker context. This works in most browsers, but IE returns `object` instead of `function`. I've updated all the usages to account for it.
PR Close#34305
In `DebugElement.attributes` we return all of the attributes from the underlying DOM node. Most browsers change the attribute names to lower case, but IE preserves the case and since we use camel-cased attributes, the return value was inconsitent. I've changed it to always lower case the attribute names.
PR Close#34305
While sanitizing on browsers that don't support the `template` element (pretty much only IE), we create an inert document and we insert content into it via `document.body.innerHTML = unsafeHTML`. The problem is that IE appears to parse the HTML passed to `innerHTML` differently, depending on whether the element has been inserted into a document or not. In particular, it seems to split some strings into multiple text nodes, which would've otherwise been a single node. This ended up throwing off some of the i18n code down the line and causing a handful of failures. I've worked around it by creating a new inert `body` element into which the HTML would be inserted.
PR Close#34305
Previously the calls to run the schematics were not being properly
or consistently awaited in the tests. While this currently does not
affect the tests' performance, this fix corrects the syntax and
adds stability for future changes.
PR Close#34364
Previously, the compiler performed an incremental build by analyzing and
resolving all classes in the program (even unchanged ones) and then using
the dependency graph information to determine which .js files were stale and
needed to be re-emitted. This algorithm produced "correct" rebuilds, but the
cost of re-analyzing the entire program turned out to be higher than
anticipated, especially for component-heavy compilations.
To achieve performant rebuilds, it is necessary to reuse previous analysis
results if possible. Doing this safely requires knowing when prior work is
viable and when it is stale and needs to be re-done.
The new algorithm implemented by this commit is such:
1) Each incremental build starts with knowledge of the last known good
dependency graph and analysis results from the last successful build,
plus of course information about the set of files changed.
2) The previous dependency graph's information is used to determine the
set of source files which have "logically" changed. A source file is
considered logically changed if it or any of its dependencies have
physically changed (on disk) since the last successful compilation. Any
logically unchanged dependencies have their dependency information copied
over to the new dependency graph.
3) During the `TraitCompiler`'s loop to consider all source files in the
program, if a source file is logically unchanged then its previous
analyses are "adopted" (and their 'register' steps are run). If the file
is logically changed, then it is re-analyzed as usual.
4) Then, incremental build proceeds as before, with the new dependency graph
being used to determine the set of files which require re-emitting.
This analysis reuse avoids template parsing operations in many circumstances
and significantly reduces the time it takes ngtsc to rebuild a large
application.
Future work will increase performance even more, by tackling a variety of
other opportunities to reuse or avoid work.
PR Close#34288
This commit fixes a couple issues that prevent `class_binding` benchmark from running: moving constants requires by the `benchmark` function before function declaration and referencing correct consts in template instructions.
PR Close#34242
The `ModuleWithProviders` type has an optional type parameter that
should be specified to indicate what NgModule class will be provided.
This enables the Ivy compiler to statically determine the NgModule type
from the declaration files. This type parameter will become required in
the future, however to aid in the migration the compiler will detect
code patterns where using `ModuleWithProviders` as return type is
appropriate, in which case it transforms the emitted .d.ts files to
include the generic type argument.
This should reduce the number of occurrences where `ModuleWithProviders`
is referenced without its generic type argument.
Resolves FW-389
PR Close#34235
TypeScript 3.7 flags `if` conditions that implicitly coerce a function/method definition. While checking for the `template` presence on a def (actually checking whether we work with Component) in `saveNameToExportMap`, the `if` condition had implicit type coercion. This commit updates the condition to use the `isComponentDef` function (that checks `def.template` against `null` internally) to avoid compilation errors with TypeScript 3.7.
PR Close#34335
Prior to this commit, values wrapped into SafeStyle were not handled correctly in [style.prop] bindings in case style sanitizer is present (when template contains some style props that require sanitization). Style sanitizer was not unwrapping values in case a given prop doesn't require sanitization.As a result, wrapped values were used as final styling values (see https://github.com/angular/angular/blob/master/packages/core/src/render3/styling/bindings.ts#L620). This commit updates the logic to unwrap safe values in sanitizer in case no sanitization is required.
PR Close#34286
Occasionally a factory function needs to be generated for an "invalid"
constructor (one with parameters types which aren't injectable). Typically
this happens in JIT mode where understanding of parameters cannot be done in
the same "up-front" way that the AOT compiler can.
This commit changes the JIT compiler to generate a new `invalidFactoryDep`
call for each invalid parameter. This instruction will error at runtime if
called, indicating both the index of the invalid parameter as well as (via
the stack trace) the factory function which was generated for the type being
constructed.
Fixes#33637
PR Close#33739
In Ivy, if you do:
`TestBed.configureTestingModule({providers: [{provide: Service}]});`
the injector will attempt to inject Service as if it was simply listed
in the providers array like `{providers: [Service]}`
This fixes an inconsistency when similarly providing an override with no
`useValue` or `useFactory`.
PR Close#33769
Prior to this commit, calling change detection for destroyed views resulted in errors being thrown in some cases. This commit adds a check to make sure change detection is invoked for non-destroyed views only.
PR Close#34241
Adds the ability to expose global symbols in the API docs via the `@globalApi` tag. Also supports optionally setting a namespace which will be added to the name automatically (e.g. `foo` will be renamed to `ng.foo`). Relevant APIs should also be exported through the `global.ts` file which will show up under `core/global`.
PR Close#34237
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
PR Close#34211
Prior to this commit, there was no check in R3TestBed to verify that metadata is resolved using a given Type. That leads to some cryptic error messages (when TestBed tries to compile a Type without having metadata) in case TestBed override functions receive unexpected Types (for example a Directive is used in `TestBed.overrideComponent` call). This commit adds the necessary checks to verify metadata presence before TestBed tries to (re)compile a Type.
PR Close#34204
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Prior to this commit, i18n runtime code failed with the exception saying that no provider was found for ChangeDetectorRef for a pipe used in ICU. The problem happened because the underlying `createViewRef` function was not taking into account IcuContainer as a valid TNodeType. This commit updates the `createViewRef` function to return corresponding ViewRef for TNodeType.IcuContainer.
PR Close#34198
Includes a few minor performance improvements:
* In the `nextContext` instruction we assign a new LView to the `LFrame.contextLView` and then we immediately look it up to get its context. We don't need to do that since we know the view that was assigned already.
* Removes the default value for the `level` parameter of `nextContextImpl` because it generates more code in es5 and is internal-only.
* Removes the default parameter from `setActiveHostElement` since it generates extra code and it's an internal function.
* Makes a check in `setElementExitFn` more strict since we're guaranteed for the value to match the type.
PR Close#34183
Fixes ngtsc incorrectly logging an unknown element diagnostic for HTML elements that are inside an SVG `foreignObject` with the `xhtml` namespace.
Fixes#34171.
PR Close#34178
Prior to this commit, the unknown element can happen twice for AOT-compiled components: once during compilation and once again at runtime. Due to the fact that `schemas` information is not present on Component and NgModule defs after AOT compilation, the second check (at runtime) may fail, even though the same check was successful at compile time. This commit updates the code to avoid the second check for AOT-compiled components by checking whether `schemas` information is present in a logic that executes the unknown element check.
PR Close#34024
With Angular CLI version 9 RC 3 we can run a single migration for a package using the name of the migration schematic.
We need to pass the schematic name as a value to the `migrate-only` option.
Ex:
```
ng update @angular/core --migrate-only migration-v9-undecorated-classes-with-di
```
See: https://github.com/angular/angular-cli/pull/16174
PR Close#33958
Use angular_ivy_enabled to determine if Ivy is being used for the ivy_test_selector.ts symbols.
Additionally, remove the reflect_metadata genrules as we not longer have a "jit" compile option
so all possible invocations result in the same generated file. Instead we can just commit this
file.
PR Close#33983
Since config=ivy now sets the define=compile flag and the define=angular_ivy_enabled
flag to cause usage of Ivy, we can update all of the documentation and scripts that
reference compile=aot to use config=ivy.
PR Close#33983
Prior to this commit, there was a runtime check in i18n logic to make sure "other" case is always present in an ICU. That was not a requirement in View Engine, so ICUs that previously worked may produce errors. This commit removes that restriction and adds support for ICUs without "other" cases.
PR Close#34042
Move a view only if it would end up at a different place.
Otherwise we would do unnecessary processing like DOM manipulation, query notifications etc.
Thanks to @pkozlowski-opensource for the change.
PR Close#34052
When inserting a `viewRef` it is possible to not provide
an `index`, which is regarded as appending to the end of
the container.
If the `viewRef` already exists in the container, then
this results in a move. But there was a fault in the logic
that computed where to insert the `viewRef` that did not
account for the fact that the `viewRef` was already in
the container, so the insertion `index` was outside the
bounds of the array.
Fixes#33924
PR Close#34052
Prior to this commit, all styles extracted from Component's template (defined using <style> tags) were ignored by JIT compiler, so only `styles` array values defined in @Component decorator were used. This change updates JIT compiler to take styles extracted from the template into account. It also ensures correct order where `styles` array values are applied first and template styles are applied second.
PR Close#34017
Previously if a type was returning itself it would cause an infinite loop in tsickle. We worked around it with a type that alises to `any`. Now that the issue has been resolved in tsickle, we can clean up the workaround.
PR Close#34019
This commit fixes a compatibility bug where pre-order lifecycle
hooks (onInit, doCheck, OnChanges) for directives on the same
host node were executed based on the order the directives were
matched, rather than the order the directives were instantiated
(i.e. injection order).
This discrepancy can cause issues with forms, where it is common
to inject NgControl and try to extract its control property in
ngOnInit. As the NgControl directive is injected, it should be
instantiated before the control value accessor directive (and
thus its hooks should run first). This ensures that the NgControl
ngOnInit can set up the form control before the ngOnInit
for the control value accessor tries to access it.
Closes#32522
PR Close#34026
These apis have been deprecated in v8, so they should stick around till v10,
but since they are defunct we are removing them early so that they don't take up payload size.
PR Close#33949
Micro-benchmarks were broken after we've introduced concept of
DECLARATION_COMPONENT_VIEW on LView (after this change embedded
views must have a pointer to a parent LView).
PR Close#34031
The root view case is already covered by the existing code in the
getRenderParent function so no need to have an explicit checks
(and associated memory reads) again.
PR Close#33988
The assertion that we have in the `directiveInject` instruction is too restrictive and we came across some pattern where it throws unnecessarily. This commit removes that assertion for now and more detailed investigation is needed to decide is we need to restrict the set of TNodeType again.
This commit also adds a test which triggered the TNodeType.View to come up in the `directiveInject` instruction, so it might be useful to avoid regressions during further refactoring.
PR Close#33948
NgModule compilation in JIT mode (that is also used in TestBed) caches module scopes on NgModule defs (using `transitiveCompileScopes` field). Module overrides (defined via TestBed.overrideModule) may invalidate this data by adding/removing items in `declarations` list. This commit forces TestBed to recalculate transitive scopes in case module overrides are present, so TestBed always gets the most up-to-date information.
PR Close#33787
This change enables "var(--my-var)" to pass through the style sanitizer.
After consulation with our security team, allowing these doesn't create
new attack vectors, so the sanitizer doesn't need to strip them.
Fixes parts of #23485 related to the sanitizer, other use cases discussed
there related to binding have been addressed via other changes to the
class and style handling in the runtime.
Closes#23485
PR Close#33841
NgModules in Ivy have a definition which contains various different bits
of metadata about the module. In particular, this metadata falls into two
categories:
* metadata required to use the module at runtime (for bootstrapping, etc)
in AOT-only applications.
* metadata required to depend on the module from a JIT-compiled app.
The latter metadata consists of the module's declarations, imports, and
exports. To support JIT usage, this metadata must be included in the
generated code, especially if that code is shipped to NPM. However, because
this metadata preserves the entire NgModule graph (references to all
directives and components in the app), it needs to be removed during
optimization for AOT-only builds.
Previously, this was done with a clever design:
1. The extra metadata was added by a function called `setNgModuleScope`.
A call to this function was generated after each NgModule.
2. This function call was marked as "pure" with a comment and used
`noSideEffects` internally, which causes optimizers to remove it.
The effect was that in dev mode or test mode (which use JIT), no optimizer
runs and the full NgModule metadata was available at runtime. But in
production (presumably AOT) builds, the optimizer runs and removes the JIT-
specific metadata.
However, there are cases where apps that want to use JIT in production, and
still make an optimized build. In this case, the JIT-specific metadata would
be erroneously removed. This commit solves that problem by adding an
`ngJitMode` global variable which guards all `setNgModuleScope` calls. An
optimizer can be configured to statically define this global to be `false`
for AOT-only builds, causing the extra metadata to be stripped.
A configuration for Terser used by the CLI is provided in `tooling.ts` which
sets `ngJitMode` to `false` when building AOT apps.
PR Close#33671
Originally, QueryList implemented Iterable and provided a Symbol.iterator
on its prototype. This caused issues with tree-shaking, so QueryList was
refactored and the Symbol.iterator added in its constructor instead. As
part of this change, QueryList no longer implemented Iterable directly.
Unfortunately, this meant that QueryList was no longer assignable to
Iterable or, consequently, NgIterable. NgIterable is used for NgFor's input,
so this meant that QueryList was not usable (in a type sense) for NgFor
iteration. View Engine's template type checking would not catch this, but
Ivy's did.
As a fix, this commit adds the declaration (but not the implementation) of
the Symbol.iterator function back to QueryList. This has no runtime effect,
so it doesn't affect tree-shaking of QueryList, but it ensures that
QueryList is assignable to NgIterable and thus usable with NgFor.
Fixes#29842
PR Close#33536
TNode.inputs are initialised during directives resolution now so we know early
if a node has directives with inputs or no. We don't need to use undefined value
as an indicator that inputs were not resolved yet.
PR Close#33798
Before this change a public name of a directive's input
was stored in 2 places:
- as a key of an object on TNode.index;
- as a value of PropertyAliasValue at the index 1
This PR changes the data structure so the public name is stored
only once as a key on TNode.index. This saves one array entry
for each and every directive input.
PR Close#33798
Adds support for chaining of `styleProp`, `classProp` and `stylePropInterpolateX` instructions whenever possible which should help generate less code. Note that one complication here is for `stylePropInterpolateX` instructions where we have to break into multiple chains if there are other styling instructions inbetween the interpolations which helps maintain the execution order.
PR Close#33837
This refactorings clearly separates the first and subsequent creation execution
of the `template` instruction. This approach has the following benefits:
- it is clear what happens during the first vs. subsequent executions;
- we can avoid several memory reads and checks after the first creation pass
(there is measurable performance improvement on various benchmarks);
- the template instructions becomes smaller and should become a candidate
for optimisations / inlining faster;
PR Close#33856
When asking for a ViewContainerRef on <ng-container> we do reuse <ng-container> comment
node as a LContainer's anachor. Before this fix the act of re-using a <ng-container>'s
comment node would result in this comment node being re-appended to the DOM in the wrong
place. With the fix in this PR we make sure that re-using <ng-container>'s comment node
doesn't result in unwanted DOM manipulation (ng-gontainer's comment node is already part
of the DOM and doesn't have to be re-created / re-appended).
PR Close#33816
In View Engine, providers which neither used `useValue`, `useClass`,
`useFactory` or `useExisting`, were interpreted differently.
e.g.
```
{provide: X} -> {provide: X, useValue: undefined}, // this is how it works in View Engine
{provide: X} -> {provide: X, useClass: X}, // this is how it works in Ivy
```
The missing-injectable migration should migrate such providers to the
explicit `useValue` provider. This ensures that there is no unexpected
behavioral change when updating to v9.
PR Close#33709
If the application is not running directly in the browser, e.g.
universal or app-shell, then the `$localize` import must be
adding to a different file than for normal browser applications.
This commit adds more information about this to avoid any
confusion.
// FW-1557
PR Close#33826
Prior to this commit the assert that we have in `directiveInject` (assert introduced recently) didn't include IcuContainer TNode type and as a result, the error is thrown in case pipes with dependencies are used inside ICUs. This commit extends the assert to allow for IcuContainer TNode types.
PR Close#33832
This commit moves the `setLContainerActiveIndex` and `getLContainerActiveIndex` functions used in a few files to a common `util/view_util.ts` lib to avoid cyclical dependency while importing `instructions/container.ts` where these functions located originally.
PR Close#33831
Currently if a consumer does something like the following, the object literal will be shared across the two elements and any instances of the component template. The same applies to array literals:
```
<div [someDirective]="{}"></div>
<div [someDirective]="{}"></div>
```
These changes make it so that we generate a pure function even if an object is constant so that each instance gets its own object.
Note that the original design for this fix included moving the pure function factories into the `consts` array. In the process of doing so I realized that pure function are also used inside of directive host bindings which means that we don't have access to the `consts`.
These changes also:
* Fix an issue that meant that the `pureFunction0` instruction could only be run during creation mode.
* Make the `getConstant` utility slightly more convenient to use. This isn't strictly required for these changes to work, but I had made it as a part of a larger refactor that I ended up reverting.
PR Close#33705
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
Prior to this change, setting style prop value to undefined or empty string would not result in resetting prop value in case the style prop is defined using [style.prop.px] syntax. The problem is that the check for empty value (and thus reseting the value) considered successful only in case of `null` value. This commit updates the check to use `isStylingValueDefined` function that also checks for undefined and empty string.
PR Close#33780
Prior to this change, ComponentFactory.create function invocation in Ivy retained the content of the host element (in case host element reference or CSS seelctor is provided as an argument). This behavior is different in View Engine, where the content of the host element was cleared, except for the case when ShadowDom encapsulation is used (to make sure native slot projection works). This commit aligns Ivy and View Engine and makes sure the host element is cleared before component content insertion.
PR Close#33487
The `ngInjectableDef` property was renamed to `ɵprov`, but core must
still support both because there are published libraries that use the
older term.
We are only interested in such properties that are defined directly on
the type being injected, not on base classes. So there is a check that
the defintion is specifically for the given type.
Previously if you tried to inject a class that had `ngInjectableDef` but
also inherited `ɵprov` then the check would fail on the `ɵprov` property
and never even try the `ngInjectableDef` property resulting in a failed
injection.
This commit fixes this by attempting to find each of the properties
independently.
Fixes https://github.com/angular/ngcc-validation/pull/526
PR Close#33732
Chains multiple listener instructions on a particular element into a single call which results in less generated code. Also handles listeners on templates, host listeners and synthetic host listeners.
PR Close#33720
Most of the use of `document` in the framework is within
the DI so they just inject the `DOCUMENT` token and are done.
Ivy is special because it does not rely upon the DI and must
get hold of the document some other way. There are a limited
number of places relevant to ivy that currently consume a global
document object.
The solution is modelled on the `LOCALE_ID` approach, which has
`getLocaleId()` and `setLocaleId()` top-level functions for ivy (see
`core/src/render3/i18n.ts`). In the rest of Angular (i.e. using DI) the
`LOCALE_ID` token has a provider that also calls setLocaleId() to
ensure that ivy has the same value.
This commit defines `getDocument()` and `setDocument() `top-level
functions for ivy. Wherever ivy needs the global `document`, it calls
`getDocument()` instead. Each of the platforms (e.g. Browser, Server,
WebWorker) have providers for `DOCUMENT`. In each of those providers
they also call `setDocument()` accordingly.
Fixes#33651
PR Close#33712
While overriding providers in Ivy TestBed (via TestBed.overrideProvider call), the old providers were retained in the list, since the override takes precedence. However, presence of providers in the list might have side-effect: if a provider has the `ngOnDestroy` lifecycle hook, this hook will be registered and invoked later (when component is destroyed). This commit updates TestBed logic to clear provider list by removing the ones which have overrides.
PR Close#33706
Prior to this patch all the styling benchmarks only tested for
template map-based style/class bindings. Because of each of the bindings
being only present in the template, there was no possibility of
there being any duplicate map-based styling bindings.
This benchmark introduces benchmarking for map-based style/class bindings
that are evaluated from both template bindings as well as directives.
This benchmark can be executed by calling:
```
bazel build //packages/core/test/render3/perf:duplicate_map_based_style_and_class_bindings_lib.min_debug.es2015.js
node dist/bin/packages/core/test/render3/perf/duplicate_map_based_style_and_class_bindings_lib.min_debug.es2015.js
```
The benchmark is also run via the `profile_all.js` script (found in
`packages/core/test/render3/perf/`)
PR Close#33608
Prior to this patch all the styling benchmarks only tested for
template-based style/class bindings. Because of each of the bindings
being only present in the template, there was no possibility of
there being any duplicate bindings. This benchmark introduces
style/class bindings being evaluated from both a template and from
various directives.
This benchmark can be executed by calling:
```
bazel build //packages/core/test/render3/perf:duplicate_style_and_class_bindings_lib.min_debug.es2015.js
node dist/bin/packages/core/test/render3/perf/duplicate_style_and_class_bindings_lib.min_debug.es2015.js
```
The benchmark is also run via the `profile_all.js` script (found in
`packages/core/test/render3/perf/`)
PR Close#33600
Prior to this change, namespaced elements such as SVG elements would not
participate correctly in directive matching as their namespace was not
ignored, which was the case with the View Engine compiler. This led to
incorrect behavior at runtime and template type checking.
This commit resolved the issue by ignoring the namespace of elements and
attributes like they were in View Engine.
Fixes#32061
PR Close#33555
This issue was found when debugging a test failure that was using lazy
loaded modules with the router. When doing this, the router calls
`NgModuleFactory.create` for the loaded module. This module gets a new
injector so the overrides provided in TestBed are not applied unless the
Injectable is in the providers list (which is not the case for
{providedIn...} Injectables).
PR Close#33606
When debugging `LView`s it is easy to get lost since all of them have
the same name. This change does three things:
1. It makes `TView` have an explicit type:
- `Host`: for the top level `TView` for bootstrap
- `Component`: for the `TView` which represents components template
- `Embedded`: for the `TView` which represents an embedded template
2. It changes the name of `LView` to `LHostView`, `LComponentView`, and
`LEmbeddedView` depending on the `TView` type.
3. For `LComponentView` and `LEmbeddedView` we also append the name of
of the `context` constructor. The result is that we have `LView`s which
are name as: `LComponentView_MyComponent` and `LEmbeddedView_NgIfContext`.
The above changes will make it easier to understand the structure of the
application when debugging.
NOTE: All of these are behind `ngDevMode` and will get removed in
production application.
PR Close#33449
Prior to this commit, i18n runtime logic used `elementAttributeInternal` function (that uses `setAttribute` function under the hood) for all elements where i18n attributes are present. However the `<ng-container>` elements in a template may also have i18n attributes and calling `setAttribute` fails, since they are represented as comment nodes in DOM. This commit ensures that we call `setAttribute` on nodes with TNodeType.Element type (that support that operation) only.
PR Close#33599
The legacy nodejs rules rollup_bundle is now deprecated and will be removed in the nodejs rules 1.0 release due in mid-November. This PR brings in the rules_nodejs internal API deps that ng_rollup_bundle, ng_package and ls_rollup_bundle depend on into this repo to break the dependency. In the future these rules should switch to use the new rollup_bundle via a macro as done in https://github.com/angular/angular/pull/33329 but this is not possible right now due to the complication of having esm5 re-rooted ts_library dependencies.
The es6 sources now have .mjs extensions so they no longer need to be re-rooted to `{package}.es6`. This eliminates the need for the collect_es6_sources() function.
Note: repo has been updated to the newest working version of rollup which is 1.25.2. There is some regression in 1.26.0 which causes the following bundling failure:
```
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1: Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
Parse error at packages/localize/localize.umd.js:491,4
export * from './src/constants';
^
ERROR: Export statement may only appear at top level
at js_error (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/parse.js:357:11)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:347:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Export._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:718:17)
at walk_body (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:168:17)
at AST_Function.call (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:430:13)
at descend (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1208:21)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:256:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Function._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:424:24)
[Function]
Target //packages/localize:npm_package failed to build
Use --verbose_failures to see the command lines of failed build steps.
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1 Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
```
Will leave that for another day.
Terser also updated to 4.3.3. Updating to 4.3.4 (https://github.com/terser/terser/blob/master/CHANGELOG.md) turns comments preservation on by default which increases the size of the //packages/core/test/bundling/todo:bundle.min.js in CI. After bazelbuild/rules_nodejs#1317 terser can be updated to the latest as passing —comments /a^/ to args can turn off all comments for the //packages/core/test/bundling/todo:bundle.min.js size test.
PR Close#33201
PR Close#33607
This patch gets rid of the configuration settings present in the
`TStylingContext` array that is used within the styling algorithm
for `[style]`, `[style.prop]`, `[class]` and `[class.name]` bindings.
These configurations now all live inside of the `TNodeFlags`.
PR Close#33540
This patch removes the need to lock the style and class context
instances to track when bindings can be added. What happens now is
that the `tNode.firstUpdatePass` is used to track when bindings are
registered on the context instances.
PR Close#33521
The `renderer-to-renderer2` migration currently does not work
properly in v9 because the migration relies on the type checker
for detecting references to `Renderer` from `@angular/core`.
This is contradictory since the `Renderer` is no longer
exported in v9 `@angular/core`. In order to make sure that
the migration still works in v9, and that we can rely on the
type checker for the best possible detection, we take advantage
of module augmentation and in-memory add the `Renderer` export
to the `@angular/core` module.
PR Close#33571
Currently TypeScript projects with an invalid tsconfig configuration,
cause the undecorated-classes-with-di migration to throw. Instead we
should gracefully exit the migration (like we do for syntactical
diagnostics), but report that there are configuration issues.
This issue surfaced when testing this migration in combination
with the Angular CLI migrations. One of the CLI migrations currently
causes invalid tsconfig files which then cause this issue in the
undecorated-classes-with-di migration.
PR Close#33567
The legacy nodejs rules rollup_bundle is now deprecated and will be removed in the nodejs rules 1.0 release due in mid-November. This PR brings in the rules_nodejs internal API deps that ng_rollup_bundle, ng_package and ls_rollup_bundle depend on into this repo to break the dependency. In the future these rules should switch to use the new rollup_bundle via a macro as done in https://github.com/angular/angular/pull/33329 but this is not possible right now due to the complication of having esm5 re-rooted ts_library dependencies.
The es6 sources now have .mjs extensions so they no longer need to be re-rooted to `{package}.es6`. This eliminates the need for the collect_es6_sources() function.
Note: repo has been updated to the newest working version of rollup which is 1.25.2. There is some regression in 1.26.0 which causes the following bundling failure:
```
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1: Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
Parse error at packages/localize/localize.umd.js:491,4
export * from './src/constants';
^
ERROR: Export statement may only appear at top level
at js_error (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/parse.js:357:11)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:347:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Export._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:718:17)
at walk_body (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:168:17)
at AST_Function.call (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:430:13)
at descend (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1208:21)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:256:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Function._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:424:24)
[Function]
Target //packages/localize:npm_package failed to build
Use --verbose_failures to see the command lines of failed build steps.
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1 Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
```
Will leave that for another day.
Terser also updated to 4.3.3. Updating to 4.3.4 (https://github.com/terser/terser/blob/master/CHANGELOG.md) turns comments preservation on by default which increases the size of the //packages/core/test/bundling/todo:bundle.min.js in CI. After bazelbuild/rules_nodejs#1317 terser can be updated to the latest as passing —comments /a^/ to args can turn off all comments for the //packages/core/test/bundling/todo:bundle.min.js size test.
PR Close#33201
To support compile time localization, we need to be
able to provide the locales via a well known global property.
This commit changes `getLocaleData()` so that it will attempt
to read the local from the global `ng.common.locales` if the
locale has not already been registered via `registerLocaleData()`.
PR Close#33523
To limit the exposure of the private `LOCALE_DATA` from outside
`@angular/core` this commit exposes private functions in the core
to hide the internal structures better.
* The `registerLocaleData()` implementation has moved from
`@angular/common` to `@angular/core`. A stub that delegates to
core has been left in common for backward compatibility.
* A new `ɵunregisterLocaleData()` function has been provided,
which is particularly useful in tests to clear out registered locales
to prevent subsequent tests from being affected.
* A private export of `ɵregisterLocaleData()` has been removed
from `@angular/common`. This was not being used and is accessible
via `@angular/core` anyway.
PR Close#33523
This patch introduces a `firstUpdatePass` flag which can be used inside
of instruction code to determine if this is the first time each
instruction is running inside of the update block of a template or
a hostBindings function.
PR Close#31270
We already store a reference to a native host of a component
view so we can drop the getHostNative utility function (that
was getting the same reference from another data structure).
PR Close#33554
In ViewEngine we used to throw an error if we encountered an unknown element while rendering. We have this already for Ivy in AoT, but we didn't in JiT. These changes implement the error for JiT mode.
PR Close#33419
The 4b81bb5c97 patch seemingly broke the
`profile_all.js` file due to the file renaming. This patch restores the
functionality of said script.
PR Close#33494
Before this change instantiating multiple directives on the same
host node would result in repeated RNode retrieval and patching.
This commint re-organises code around directive instance creation
so the host node processing (common to all directives) happens
once and only once.
As the additional benefit the directive instantiation logic gets
centralised in one function (at the expense of patching logic
duplication for root node).
PR Close#33322
Currently if one of the project targets could not be analyzed
due to AOT compiler program failures, we gracefully proceed
with the migration. This is expected, but we should not
print a message at the end of the migration that the migration
was _successful_. The migration was only done partially, hence
it's potentially incomplete and we should make it clear that once
the failures are resolved, the migration should be re-run.
PR Close#33315
Now that we've replaced `ngBaseDef` with an abstract directive definition, there are a lot more cases where we generate a directive definition without a selector. These changes make it so that we don't generate the `selectors` array if it's going to be empty.
PR Close#33431
Prior to this commit, i18n logic which ensures that elements removed in a translation are also removed in DOM, didn't take into account the fact that elements may have local refs. As a result, remove operation failed, since there is no corresponding tNode found. This commit updates the logic to skip all local refs while going though the list of nodes to ensure that DOM matches elements present in translation.
PR Close#33415
With the next version of the CLI we don't need to add logging for the description of the schematic as part of the schematic itself.
This is because now, the CLI will print the description defined in the `migrations.json` file.
See: https://github.com/angular/angular-cli/pull/15951
PR Close#33440
`bindingIndex` stores the current location of the bindings in the
template function. Because it used to be stored in `LView` that `LView`
was not reentrant. This could happen if a binding was a getter and had
a side-effect of calling `detectChanges()`.
By moving the `bindingIndex` to `LFrame` where all of the global state
is kept in reentrant way we correct the issue.
PR Close#33235
Currently the `missing-injectable` migration seems to add
`@Injectable()` to third-party classes in type definitions.
This not an issue in general since we do not generate broken code
by inserting a decorator into a type definition file. Though, we can
avoid adding the decorator since it won't have any effect and in
general we should not write to non source files of the compilation unit.
PR Close#33286
We should not migrate the reference from `useExisting`. This is because
developers can only use the `useExisting` value as a token. e.g.
```ts
@NgModule({
providers: [
{provide: AppRippleConfig, useValue: rippleOptions},
{provide: MAT_RIPPLE_OPTIONS, useExisting: AppRippleConfig},
]
})
export class AppModule {}
```
In the case above, nothing should be decorated with `@Injectable`. The
`AppRippleConfig` class is just used as a token for injection.
PR Close#33286
Currently the migration is unable to migrate instances where
the provider definition uses `forwardRef`. Since this is a
common pattern, we should support that from within the migration.
The solution to the problem is adding a foreign function resolver
to the `PartialEvaluator`. This basically matches the usage of
the static evaluation that is used by the ngtsc annotations.
PR Close#33286
this makes running and profiling tests much easier. Example usage:
```
yarn bazel run --define=compile=aot //packages/core/test/render3/perf:noop_change_detection
```
See README.md update for more info.
PS: I considered moving the ng_rollup bundle into the macro but I didn't want to make
too many changes in this PR. If we find running benchmarks in this way useful, we
should refactor the build file more, and move the ng_rollup_bundle targets into the
macro.
PR Close#33389
Removes `ngBaseDef` from the compiler and any runtime code that was still referring to it. In the cases where we'd previously generate a base def we now generate a definition for an abstract directive.
PR Close#33264
For abstract directives, i.e. directives without a selector, it may
happen that their constructor is called explicitly from a subclass,
hence its parameters are not required to be valid for Angular's DI
purposes. Prior to this commit however, having an abstract directive
with a constructor that has parameters that are not eligible for
Angular's DI would produce a compilation error.
A similar scenario may occur for `@Injectable`s, where an explicit
`use*` definition allows for the constructor to be irrelevant. For
example, the situation where `useFactory` is specified allows for the
constructor to be called explicitly with any value, so its constructor
parameters are not required to be valid. For `@Injectable`s this is
handled by generating a DI factory function that throws.
This commit implements the same solution for abstract directives, such
that a compilation error is avoided while still producing an error at
runtime if the type is instantiated implicitly by Angular's DI
mechanism.
Fixes#32981
PR Close#32987
The styling algorithm requires that the `RNode` has a `className`
property in order to execute the fast-path. This changes adds the
emulation of this property.
PR Close#33392
This commit adds CopyDefinitionFeature, which supports the case where an
entire decorator (@Component or @Directive) is inherited from parent to
child.
The existing inheritance feature, InheritDefinitionFeature, supports merging
of parent and child definitions when both were originally present. This
merges things like inputs, outputs, host bindings, etc.
CopyDefinitionFeature, on the other hand, compensates for a definition that
was missing entirely on the child class, by copying fields that aren't
ordinarily inherited (like the template function itself).
This feature is intended to only be used as part of ngcc code generation.
PR Close#33362
This patch ensures that the `[style]` and `[class]` based bindings
are directly applied to an element's style and className attributes.
This patch optimizes the algorithm so that it...
- Doesn't construct an update an instance of `StylingMapArray` for
`[style]` and `[class]` bindings
- Doesn't apply `[style]` and `[class]` based entries using
`classList` and `style` (direct attributes are used instead)
- Doesn't split or iterate over all string-based tokens in a
string value obtained from a `[class]` binding.
This patch speeds up the following cases:
- `<div [class]>` and `<div class="..." [class]>`
- `<div [style]>` and `<div style="..." [style]>`
The overall speec increase is by over 5x.
PR Close#33336
`LFrame` stores information specifice to the current `LView` As the code
enters and leaves `LView`s we use `enterView()` and `leaveView()`
respectively to build a a stack of `LFrame`s. This allows us to easily
restore the previous `LView` instruction state.
PR Close#33178
Recently it was made possible to have a directive without selector,
which are referred to as abstract directives. Such directives should not
be registered in an NgModule, but can still contain decorators for
inputs, outputs, queries, etc. The information from these decorators and
the `@Directive()` decorator itself needs to be registered with the
central `MetadataRegistry` so that other areas of the compiler can
request information about a given directive, an example of which is the
template type checker that needs to know about the inputs and outputs of
directives.
Prior to this change, however, abstract directives would only register
themselves with the `MetadataRegistry` as being an abstract directive,
without all of its other metadata like inputs and outputs. This meant
that the template type checker was unable to resolve the inputs and
outputs of these abstract directives, therefore failing to check them
correctly. The typical error would be that some property does not exist
on a DOM element, whereas said property should have been bound to the
abstract directive's input.
This commit fixes the problem by always registering the metadata of a
directive or component with the `MetadataRegistry`. Tests have been
added to ensure abstract directives are handled correctly in the
template type checker, together with tests to verify the form of
abstract directives in declaration files.
Fixes#30080
PR Close#33131
In the post-$localize world the current locale value is defined by setting
`$localize.locale` which is then read at runtime by Angular in the provider
for the `LOCALE_ID` token and also passed to the ivy machinery via`setLocaleId()`.
The $localize compile-time inlining tooling can replace occurrences of
`$localize.locale` with a string literal, similar to how translations
are inlined.
// FW-1639
See https://github.com/angular/angular-cli/issues/15896
PR Close#33314
Decrease `MIN_SAMPLE_DURATION` to make it more likely that we cane fit into single time slice.
Increase `MIN_SAMPLE_COUNT_NO_IMPROVEMENT` to make it more likely to find the best
PR Close#33341
change the existing implementation from using
```
string.split(/\s+/);
```
to a char scan which performers the same thing.
The reason why `split(/\s+/)` is slow is that:
- `/\s+/` allocates new `RegExp` every time this code executes.
- `RegExp` scans are a lot more expensive because they are more powerful.
PR Close#33326
Static methods that return a type of ModuleWithProviders currently
do not have to specify a type because the generic falls back to any.
This is problematic because the type of the actual module being
returned is not present in the type information.
Since Ivy uses d.ts files exclusively for downstream packages
(rather than metadata.json files, for example), we no longer have
the type of the actual module being created.
For this reason, a generic type should be added for
ModuleWithProviders that specifies the module type. This will be
required for all users in v10, but will only be necessary for
users of Ivy in v9.
PR Close#33217
Angular v9 schematics should print out a link to the migration
guide associated with each schematic. This way, users have an
easy way to find more information about the automatic code
transformations they will see with `ng update`.
PR Close#33258
With Ivy the `entryComponents` array isn't necessary anymore. These changes mark it as deprecated so that it can be removed in a future version.
PR Close#33205
Until now, the template type checker has not checked any of the event
bindings that could be present on an element, for example
```
<my-cmp
(changed)="handleChange($event)"
(click)="handleClick($event)"></my-cmp>
```
has two event bindings: the `change` event corresponding with an
`@Output()` on the `my-cmp` component and the `click` DOM event.
This commit adds functionality to the template type checker in order to
type check both kind of event bindings. This means that the correctness
of the bindings expressions, as well as the type of the `$event`
variable will now be taken into account during template type checking.
Resolves FW-1598
PR Close#33125
Prior to this fix if a map-based class or style binding wrote
its values onto an elemenent, the internal styling context would
not register the binding if the initial value as a `NO_CHANGE`
value. This situation occurs if a directive takes control of the
`class` or `style` input values and then returns a `NO_CHANGE` value
if the initial value is empty.
This patch ensures that all bindings are always registered with the
`TStylingContext` data-structure even if their initial value is
an instance of `NO_CHANGE`.
PR Close#33236
Prior to this fix, all style/class bindings (e.g. `[style]` and
`[class.foo]`) would quietly update a binding value if and when the
current binding value changes during checkNoChanges.
With this patch, all styling instructions will properly check to see
if the value has changed during the second pass of detectChanges()
if checkNoChanges is active.
PR Close#33103
Prior to this commit, metadata defined on ICU container element was not inherited by the ICU if the whole message is a single ICU (for example: `<ng-container i18n="meaning|description@@id">{count, select, ...}</ng-container>). This commit updates the logic to use parent container i18n meta information for the cases when a message consists of a single ICU.
Fixes#33171
PR Close#33191
LocaleID defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngLocaleIdDef to loc. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33212
Turns out that writing to global state is more expensive than writing to
a property on an object.
Slower:
````
let count = 0;
function increment() {
count++;
}
```
Faster:
````
const state = {
count: 0
};
function increment() {
state.count++;
}
```
This change moves all of the instruction state into a single state object.
`noop_change_detection` benchmark
Pre refactoring: 16.7 us
Post refactoring: 14.523 us (-13.3%)
PR Close#33093
Prior to this commit, all `className` inputs were not set because the runtime code assumed that the `classMap` instruction is only generated for `[class]` bindings. However the `[className]` binding also produces the same `classMap`, thus the code needs to distinguish between `class` and `className`. This commit adds extra logic to select the right input name and also throws an error in case `[class]` and `[className]` bindings are used on the same element simultaneously.
PR Close#33188
This patch introduces the `printTable()` and `printSources()`
methods to `DebugStylingContext` which can be used via the
`window.ng.getDebugNode` helpers when debugging an application.
PR Close#33179
Injectable defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngInjectableDef to "prov" (for "provider", since injector defs
are known as "inj"). This is because property names cannot
be minified by Uglify without turning on property mangling
(which most apps have turned off) and are thus size-sensitive.
PR Close#33151
Injector defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngInjectorDef to inj. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33151
This change assures that data structures related to initial inputs
(ones set from static attributes) are created only once (during the
first template pass) and no additional runtime checks are done for
subsequent passes.
Additionally this commit changes the data structure used by initial inputs
on TNode - previously initial inputs for a directive were stored at the
directive index in LView. This meant that an array holding initial inputs
was relativelly big and had many null elements (as placeholders for elements,
directives, injector etc.). After the change we only create an array of a size
equal to a number of directives matched on a given TNode.
For the `directive_instantiate` benchmark it boils to allocating a 1-element
array vs. 100-element array previously.
PR Close#33195
Prior to this commit, Ivy runtime asserted that a given element is an instance of a DOM node. These asserts may not be correct in case custom renderer is used, which operates objects with a shape different than DOM nodes. This commit updates the code to avoid the mentioned checks in case procedural renderer is used.
PR Close#33156
Prior to this patch, if a map-class binding is applied directly then
that value will be incorrectly provided a sanitizer even if there is no
sanitization present for an element.
PR Close#33154
Module defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngModuleDef to mod. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33142
Pipe defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngPipeDef to pipe. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33142
Factory defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngFactoryDef to fac. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngPipeDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33116
Currenly the `missing-injectable` migration only migrates providers referenced from
`@NgModule` definitions. The schematic currently does not cover the migration for
providers referenced in `@Directive` or `@Component` definitions.
We need to handle the following keys for directives/components:
- `@Directive` -> `providers`
- `@Component` -> `providers` and `viewProviders`.
This commit ensures that the migration handles providers for these
definitions.
PR Close#33011
BREAKING CHANGE:
We no longer directly have a direct depedency on `tslib`. Instead it is now listed a `peerDependency`.
Users not using the CLI will need to manually install `tslib` via;
```
yarn add tslib
```
or
```
npm install tslib --save
```
PR Close#32167
Directive defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngDirectiveDef to dir. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngFactoryDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33110
Component defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
`ngComponentDef` to `cmp`. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngDirectiveDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33088
Based on the results of the `directive_instantiate` executing host
bindings logic (in creation mode) account for ~23% of time spent in
the directive instantiation, even if a directive doesn't have host
bindings! This is clearly wastful hence a new flag.
PR Close#33102
This patch enables a styling debug instance (which is apart of the
`debugNode.styles` or `debugNode.classes` data structures) to expose
its context value so that it can be easily debugged.
PR Close#32856
Prior to this fix, whenever a style or class binding is present, the
binding application process would require an instance of `TStylingContext`
to be built regardless of whether or not any binding resolution is needed
(just so that it knows whether or not there are any collisions).
This check is, however, unnecessary because if (and only if) there
are directives present on the element then are collisions possible.
This patch removes the need for style/class bindings to register
themselves on to a `TStylingContext` if there are no directives and
present on an element. This means that all map and prop-based
style/class bindings are applied as soon as bindings are updated on
an element.
PR Close#32919
We used to have a custom version of the NodeInjectorFactory check that was
supposed to be faster to the direct usage of the `instanceof` operator. This
might have been the case in the past but the recent benchmark shows that using
`instanceof` speeds up the `directive_instantiate` by ~10%
(from time getting from ~340ms down to ~305ms).
PR Close#33082
A PR that updates one of the benchmarks and another one that changes the signature for `elementStart` got in around the same time which is causing a compilation error. These changes fix the error.
PR Close#33067
Currently Ivy stores the element attributes into an array above the component def and passes it into the relevant instructions, however the problem is that upon minification the array will get a unique name which won't compress very well. These changes move the attributes array into the component def and pass in the index into the instructions instead.
Before:
```
const _c0 = ['foo', 'bar'];
SomeComp.ngComponentDef = defineComponent({
template: function() {
element(0, 'div', _c0);
}
});
```
After:
```
SomeComp.ngComponentDef = defineComponent({
consts: [['foo', 'bar']],
template: function() {
element(0, 'div', 0);
}
});
```
A couple of cases that this PR doesn't handle:
* Template references are still in a separate array.
* i18n attributes are still in a separate array.
PR Close#32798
Accessing a string's character at index allocates a new, single character string.
A better (faster) check is to use `charCodeAt` that doesn't trigger allocation.
This simple change speeds up the element_text_create benchmark by ~7%.
PR Close#32997
Removes the `Renderer` and related symbols which have been deprecated since version 4.
BREAKING CHANGES:
* `Renderer` has been removed. Use `Renderer2` instead.
* `RenderComponentType` has been removed. Use `RendererType2` instead.
* `RootRenderer` has been removed. Use `RendererFactory2` instead.
PR Close#33019
Currently the `ngForOf` input accepts `null` or `undefined` as valid
values. Although when using strict template input type checking
(which will be supported by `ngtsc`), passing `null` or `undefined`
with strict null checks enabled causes a type check failure because
the type for the `ngForOf` input becomes too strict if strict null checks
are enabled. The type of the input needs to be expanded to also accept
`null` or `undefined` to behave consistently regardless of the
`strictNullChecks` flag.
This is necessary because whenever strict input type checking is enabled
by default, most of the Angular projects that use `*ngFor` with the async pipe
will either need to disable template type checking or strict null checks
because the `async` pipe returns `null` if the observable hasn't been
emitted yet.
See for example how this affects the `angular/components` repository and
how much bloat the workaround involves: https://github.com/angular/components/pull/16373/files#r296942696.
PR Close#31371
In View Engine, animation metadata could occur in nested arrays which
would be flattened in the compiler. When compiling a component for Ivy
however, the compiler no longer statically evaluates a component's
animation metadata and is therefore unable to flatten it statically.
This resulted in an issue to find animations at runtime, as the metadata
was incorrectly registered with the animation engine.
Although it would be possible to statically evaluate the animation
metadata in ngtsc, doing so would prevent reusable animations exported
from libraries from being usable as ngtsc's partial evaluator is unable
to read values inside libraries. This is unlike ngc's usage of static
symbols represented in a library's `.metadata.json`, which explains how
the View Engine compiler is able to flatten the animation metadata
statically.
As an alternative solution, the metadata flattening is now done in the
runtime during the registration of the animation metadata with the
animation engine.
Fixes#32794
PR Close#32818
Prior to this change, ng-reflect properties were not created in case an attribute was marked as translatable (for ex. `i18n-title`). This commit adds the logic to generate ng-reflect for such cases.
PR Close#32989
Prior to this commit, the `ng` was exposed in global namespace, which turned out to be problematic when minifying code with Closure, since it sometimes clobber our `ng` global. This commit aligns Ivy debugging tools behavior with existing logic in "platform-browser" package (packages/platform-browser/src/dom/util.ts#L31) by avoiding `ng` in global namespace when Closure Compiler is used.
PR Close#33010
Re-enables the dynamic queries migration, now that we have all of the necessary framework changes in place.
Also moves the logic that identifies static queries out of the compiler and into the static queries migration, because that's the only place left that's using it.
PR Close#32992
Followup to #32720 that removed the logic that statically determines whether a query is dynamic.
This updates the docs to reflect that, and mentions that the flag now defaults to false.
PR Close#32993
Current we need to create and override certain compiler host methods in every schematic because schematics use a virtual fs. We this change we extract this logic to a common util.
PR Close#32827
The creation of StaticReflector in createMetadataResolver() is a very expensive operation because it involves numerous module resolutions.
To make matter worse, since the API of the Reflector does not provide the ability to invalidate its internal caches, it has to be destroyed and recreated on *every* program change.
This has a HUGE impact on performance.
This PR fixes this problem by carefully invalidating all StaticSymbols in a file that has changed, thereby reducing the overhead of recomputation on program change.
PR Close#32543
This is a re-submit of #32686.
Switches back to having the static flag be optional on ViewChild and ContentChild queries, in preparation for changing its default value.
PR Close#32986
This PR updates Angular to compile with TypeScript 3.6 while retaining
compatibility with TS3.5. We achieve this by inserting several `as any`
casts for compatiblity around `ts.CompilerHost` APIs.
PR Close#32908
Currently the undecorated-classes-with-di migration leverages NGC in order
to work with metadata resolution. Since NGC by default tries to resolve referenced
resources on initialization of the underlying TS program, it can result in unexpected
migration failures due to missing resource files.
This is especially an issue since the CLI wraps the `AngularCompilerProgram` with
special logic (i.e. to support SCSS preprocessing etc.). We don't have all of this since
we instantiate a vanilla NGC program.
The solution to the problem is to simply treat resource requests as valid, and returning
a fake content. The migration is not dependent on templates or stylesheets.. so it's the
simplest and most robust solution.
Fixes#32826
PR Close#32953
ec4381d explicitly set `enableIvy: false` for all migrations inside
the core package. This actually hides migration issues because the
migration itself should ensure that it instantiates the right
compiler program if it relies on `@angular/compiler-cli`.
We should remove these options from all migration tests to
ensure that we catch issues with migrations running in version
9 where Ivy is enabled by default.
e.g. e5636a322c
was accidentally hidden due to the `enableIvy: false` option.
PR Close#32954
ec4381d enabled Ivy by default. This is problematic as migrations
like `static-queries` depend on the `AngularCompilerProgram` (NGC)
in order to perform the migration from version 7 to version 8.
In order to ensure that the migration always runs with NGC
(and doesn't get the `NgtscProgram`), we need to explicitly disable
ivy when creating the `@angular/compiler-cli` program for the migration.
This code is still relevant even though the update from version 7
to version 8 landed. Developers can run `ng update` from version 7
and immediately get to version 9 where Ivy is enabled by default (and in
that case we need to ensure that ngtsc is not accidentally used).
Similar to
e5636a322c.
PR Close#32954
In an attempt to be compatible with previous translation files
the Angular compiler was generating instructions that always
included the message id. This was because it was not possible
to accurately re-generate the id from the calls to `$localize()` alone.
In line with https://hackmd.io/EQF4_-atSXK4XWg8eAha2g this
commit changes the compiler so that it only renders ids if they are
"custom" ones provided by the template author.
NOTE:
When translating messages generated by the Angular compiler
from i18n tags in templates, the `$localize.translate()` function
will compute message ids, if no custom id is provided, using a
common digest function that only relies upon the information
available in the `$localize()` calls.
This computed message id will not be the same as the message
ids stored in legacy translation files. Such files will need to be
migrated to use the new common digest function.
This only affects developers who have been trialling `$localize`, have
been calling `loadTranslations()`, and are not exclusively using custom
ids in their templates.
PR Close#32867
With #31953 we moved the factories for components, directives and pipes into a new field called `ngFactoryDef`, however I decided not to do it for injectables, because they needed some extra logic. These changes set up the `ngFactoryDef` for injectables as well.
For reference, the extra logic mentioned above is that for injectables we have two code paths:
1. For injectables that don't configure how they should be instantiated, we create a `factory` that proxies to `ngFactoryDef`:
```
// Source
@Injectable()
class Service {}
// Output
class Service {
static ngInjectableDef = defineInjectable({
factory: () => Service.ngFactoryFn(),
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
2. For injectables that do configure how they're created, we keep the `ngFactoryDef` and generate the factory based on the metadata:
```
// Source
@Injectable({
useValue: DEFAULT_IMPL,
})
class Service {}
// Output
export class Service {
static ngInjectableDef = defineInjectable({
factory: () => DEFAULT_IMPL,
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
PR Close#32433
Switches back to having the `static` flag be optional on `ViewChild` and `ContentChild` queries, in preparation for changing its default value.
PR Close#32686
There are a couple scenarios that are problematic and need special
handling:
1. A user has a custom implementation of lazy-loaded modules, sets some
provider overrides, then compiles the module so it can be loaded. In a
follow-up test, the user sets different overrides for the module and
then compiles. This is problematic because we need to be sure the module
registered in the first test is not used, so we need to clear it out of
the modules list in `ng_module_factory_registration`.
2. A user has a similar lazy-loaded module factory implementation but
relies on the module being registered automatically. This can happen,
for example, as a side effect of importing the ngfactory file.
PR Close#32944
Child component refresh must happen before executing the ViewQueryFn because
child components could insert a template from the host that contains the result
of the ViewQuery function (see related test added in this PR).
PR Close#32922
This patch changes the Ivy `DebugElement` code to always read style and
class values directly from the native element instead of reading them
through the styling contexts. The reason for this change is because Ivy
does not make use of a debug renderer and will therefore not have access
to any classes/styles applied directly through the renderer (unless it
reads the values directly from the element).
PR Close#32842
Prior to this commit, the `ngProjectAs` attribute was only included with a special flag and in a parsed format. As a result, projected node was missing `ngProjectAs` attribute as well as other attributes added after `ngProjectAs` one. This is problematic since app code might rely on the presence of `ngProjectAs` attribute (for example in CSS). This commit fixes the problem by including `ngProjectAs` into attributes array as a regular attribute and also makes sure that the parsed version of the `ngProjectAs` attribute with a special marker is added after regular attributes (thus we set them correctly at runtime). This change also aligns View Engine and Ivy behavior.
PR Close#32784
This release includes a ts_config runfiles fix so also cleaning up the one line work-around from #31943.
This also updates to upstream rules_webtesting browser repositories load("@io_bazel_rules_webtesting//web/versioned:browsers-0.3.2.bzl", "browser_repositories") to fix a breaking change in the chromedriver distro. This bumps up the version of chromium to the version here: https://github.com/bazelbuild/rules_webtesting/blob/master/web/versioned/browsers-0.3.2.bzl
PR Close#32151
This patch fixes a bug where the map-based cursor moves too far and
skips intermediate values when the correct combination of single-prop
bindings and map-based bindings are used together.
PR Close#32774
This patch introduces the `printTable()` and `printSources()`
methods to `DebugStylingContext` which can be used via the
`window.ng.getDebugNode` helpers when debugging an application.
PR Close#32753
This patch enables a styling debug instance (which is apart of the
`debugNode.styles` or `debugNode.classes` data structures) to expose
its context value so that it can be easily debugged.
PR Close#32753
Prior to this patch the `window.ng.getDebugNode` method would fail to
return the debug information for an element that is a host element to
a component.
PR Close#32780
Before this refactoring native node `classList` / `style` properties were
read even if not used. The reason for this was desire to avoid code duplication
between procedural and non-procedural renderers. Unfortunatelly for the case
which will be used by most users (a procedura renderer) the `classList` / `style`
properties were read twice, making the `setStyle` \ `setClass` functions the
most expensive ones (self time) in several benchmarks (large table, expanding
rows).
This refactoring adds a bit of code duplication in order to get better
runtime performance. The code duplication will be removed when we drop
checks for a procedural renderer.
PR Close#32716
Prior to this patch if any backwards-compatible Angular code was using
Ivy then the built-in `window.ng` debug utilies would not be exposed.
PR Close#32725
Now that the `$localize` translations are `MessageId` based the
compiler must render `MessageId`s in its generated `$localize` code.
This is because the `MessageId` used by the compiler is computed
from information that does not get passed through to the `$localize`
tagged string.
For example, the generated code for the following template
```html
<div id="static" i18n-title="m|d" title="introduction"></div>
```
will contain these localization statements
```ts
if (ngI18nClosureMode) {
/**
* @desc d
* @meaning m
*/
const MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1 = goog.getMsg("introduction");
I18N_1 = MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1;
}
else {
I18N_1 = $localize \`:m|d@@8809028065680254561:introduction\`;
}
```
Since `$localize` is not able to accurately regenerate the source-message
(and so the `MessageId`) from the generated code, it must rely upon the
`MessageId` being provided explicitly in the generated code.
The compiler now prepends all localized messages with a "metadata block"
containing the id (and the meaning and description if defined).
Note that this metadata block will also allow translation file extraction
from the compiled code - rather than relying on the legacy ViewEngine
extraction code. (This will be implemented post-v9).
Although these metadata blocks add to the initial code size, compile-time
inlining will completely remove these strings and so will not impact on
production bundle size.
PR Close#32594
Prior to this patch, each time `advance()` would run (or when a
templateFn or hostBindings code exits) then the core change detection
code would check to see whether the styling data needs to be reset. This
patch removes that functionality and places everything inside of the
scheduled styling exit function. This means that each time one or more
styling bindings run (even if the value hasn't changed) then an exit
function will be scheduled and that will do all the cleanup.
PR Close#32591
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32591
Currently all property instructions eventually call into `elementPropertyInternal` which in turn calls to `getLView`, however all of the instructions already have access to the LView. These changes switch to passing in the LView as a parameter.
PR Close#32681
If an <ng-template> contains a structural directive (for example *ngIf), Ngtsc generates extra template function with 1 template instruction call. When <ng-template> tag also contains i18n attribute on it, we generate i18nStart and i18nEnd instructions around it, which is unnecessary and breaking runtime. This commit adds a logic to make sure we do not generate i18n instructions in case only `template` is present.
PR Close#32623
This is a refactoring that moves the source code around to provide a better
platform for adding the compile-time inlining.
1. Move the global side-effect import from the primary entry-point to a
secondary entry-point @angular/localize/init.
This has two benefits: first it allows the top level entry-point to
contain tree-shakable shareable code; second it gives the side-effect
import more of an "action" oriented name, which indicates that importing
it does something tangible
2. Move all the source code into the top src folder, and import the localize
related functions into the localize/init/index.ts entry-point.
This allows the different parts of the package to share code without
a proliferation of secondary entry-points (i.e. localize/utils).
3. Avoid publicly exporting any utilities at this time - the only public
API at this point are the global `$localize` function and the two runtime
helpers `loadTranslations()` and `clearTranslations()`.
This does not mean that we will not expose additional helpers for 3rd
party tooling in the future, but it avoid us preemptively exposing
something that we might want to change in the near future.
Notes:
It is not possible to have the `$localize` code in the same Bazel package
as the rest of the code. If we did this, then the bundled `@angular/localize/init`
entry-point code contains all of the helper code, even though most of it is not used.
Equally it is not possible to have the `$localize` types (i.e. `LocalizeFn`
and `TranslateFn`) defined in the `@angular/localize/init` entry-point because
these types are needed for the runtime code, which is inside the primary
entry-point. Importing them from `@angular/localize/init` would run the
side-effect.
The solution is to have a Bazel sub-package at `//packages/localize/src/localize`
which contains these types and the `$localize` function implementation.
The primary `//packages/localize` entry-point imports the types without
any side-effect.
The secondary `//packages/localize/init` entry-point imports the `$localize`
function and attaches it to the global scope as a side-effect, without
bringing with it all the other utility functions.
BREAKING CHANGES:
The entry-points have changed:
* To attach the `$localize` function to the global scope import from
`@angular/localize/init`. Previously it was `@angular/localize`.
* To access the `loadTranslations()` and `clearTranslations()` functions,
import from `@angular/localize`. Previously it was `@angular/localize/run_time`.
PR Close#32488
This perf-focused refactoring moves the TNode's input / output initialization
logic to the first template pass - close to the place where directives are
matched and resolved.
This code change makes it possible to update-mode checks for both property
bindings and listeners registration.
PR Close#32608
All of the `pipeBind` instructions call into `isPure` and `unwrapValue` which in turn call `getLView` internally. These internal calls are redundant, because we already have the `LView` from the `load` calls just before it.
PR Close#32633
Before this refactoring we had 2 utility functions to check if a given
TNode has matching directives. This PR leaves just one such function
(one that does less memory read).
PR Close#32495
While determining a property name to bind to we were checking a mapping object
resulting in the megamorphic read. Replacing such read with a series of if checks
speeds up rproprty update benchmark ~30% (~1400ms down to ~1000ms).
PR Close#32574
Ensures that the "core_all:size_test" target runs with "--define=compile=aot".
This is necessary because we don't run this test on CI currently, but if we run
it manually, we need to ensure that it runs with Ivy for proper size comparisons.
PR Close#32613
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32596
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
Prior to this commit, a directive with a selector `selector=".Titledir"` would not match an element like `div class="titleDir"` in Ivy whereas it would in VE. The same issue was present for `selector="[title=Titledir]` and `title="titleDir"`. This fixes the Ivy behavior by changing the matching algorithm to use lowercased values.
Note that some `render3` tests needed to be changed to reflect that the compiler generates lowercase selectors. These tests are in the process to be migrated to `acceptance` to use `TestBed` in another PR anyway.
PR Close#32548
Adds two acceptance tests to show a current difference in behavior between Ivy and VE.
A directive with a selector `.Titledir` matches an element with `class="titleDir"` in VE but not in Ivy.
Same thing for an attribute value.
PR Close#32548
Prior to this commit, the `previousOrParentTNode` was set to null after performing all operations within `refreshView` function. It's causing problems in more complex scenarios, for example when change detection is triggered during DI (see test added as a part of this commit). As a result, global state might be corrupted. This commit captures current value of `previousOrParentTNode` and restores it after `refreshView` call.
PR Close#32521
Replaces the `select` instruction with a new one called `advance`. Instead of the jumping to a specific index, the new instruction goes forward X amount of elements. The advantage of doing this is that it should generate code the compresses better.
PR Close#32516
The `goog.getMsg()` function requires placeholder names to be camelCased.
This is not the case for `$localize`. Here placeholder names need
match what is serialized to translation files.
Specifically such placeholder names keep their casing but have all characters
that are not in `a-z`, `A-Z`, `0-9` and `_` converted to `_`.
PR Close#32509
Logs a warning instead of throwing when running into a binding to an unknown property in JIT mode. Since we aren't using a schema for the runtime validation anymore, this allows us to support browsers where properties are unsupported.
PR Close#32463
Prior to this commit, listeners order was not preserved in case we coalesce them to avoid triggering unnecessary change detection cycles. For performance reasons we were attaching listeners to existing events at head (always using first listener as an anchor), to avoid going through the list, thus breaking the order in which listeners are registered. In some scenarios this order might be important (for example with `ngModelChange` and `input` listeners), so this commit updates the logic to put new listeners at the end of the list. In order to avoid performance implications, we keep a pointer to the last listener in the list, so adding a new listener takes constant amount of time.
PR Close#32484
We need to be clearer to developers who upgrade to v9 (next) and get this
error, why they have a problem and what they have to do about it.
Once we have a better CLI schematics story, where this import will be
included by default in new applications and a CLI migration will add it
when upgrading apps to v9, we could simplify or remove this error message.
PR Close#32491
Fixes an issue where Ivy incorrectly inserts items in the beginning of an `ngFor`, if the `ngFor` is set on an `ng-container`. The issue comes from the fact that we choose the `ng-container` comment node as the anchor point before which to insert the content, however the node might be after any of the nodes inside the container. These changes switch to picking out the first node inside of the container instead.
PR Close#32324
Historically bind() used to be a separate instruction. With a series of
refactoring it became a utility function but after recent code changes
it does not provide any valuable abstraction / help. On the contrary -
it can be seen as a performance problem (forces unnecessary comparison to
`NO_CHANGE` during change detection).
PR Close#32489
Prior to this commit, complex expressions (that require additional statements to be generated) were handled incorrectly in case they were used in attributes annotated with i18n flags. The problem was caused by the fact that extra statements were not appended to the temporary vars block, so they were missing in generated code. This commit updated the logic to use the `convertPropertyBinding`, which contains the necessary code to append extra statements. The `convertExpressionBinding` function was removed as it duplicates the `convertPropertyBinding` one (for the most part) and is no longer used.
PR Close#32309
Prior to this fix if a `NO_CHANGE` value was assigned to a binding, or
an interpolation value rendererd a `NO_CHANGE` value, then the presence
of that value would cause the internal counter index values to not
increment properly. This patch ensures that this doesn't happen and
that the counter/bitmask values update accordingly.
PR Close#32143
PR #32154 introduced `platform` and `any` for `providedIn` and the doc has a minor typo.
Also a test name was not changed accordingly to the refactoring done.
PR Close#32410
Since property binding metadata storage is guarded with the ngDevMode now
and several instructions were merged together, we can simplify the way we
store and read property binding metadata.
PR Close#32457
This commit changes the Angular compiler (ivy-only) to generate `$localize`
tagged strings for component templates that use `i18n` attributes.
BREAKING CHANGE
Since `$localize` is a global function, it must be included in any applications
that use i18n. This is achieved by importing the `@angular/localize` package
into an appropriate bundle, where it will be executed before the renderer
needs to call `$localize`. For CLI based projects, this is best done in
the `polyfills.ts` file.
```ts
import '@angular/localize';
```
For non-CLI applications this could be added as a script to the index.html
file or another suitable script file.
PR Close#31609
DebugElement.query also searches elements that may have been created
outside of Angular (ex: with `document.appendChild`). The current
behavior attempts to get the LContext of these nodes but throws an error
because the LContext does not exist.
PR Close#32361
Commit 904a2018e0 introduced a new migration for
undecorated classes with decorated Angular class members. Currently the migration
always calls `tree.beginUpdate` and `tree.commitUpdate` (even if there are no changes).
This causes unnecessary updates to be reported to developers running `ng update`. Once
an update is commited, the CLI will report the update regardless of whether any changes were
made or not.
This behavior can be observed in the `ng_update_migrations` integration test. See:
https://circleci.com/gh/angular/angular/438470#tests/containers/3. Notice how all
source files are denoted as `UPDATED` (even though there are no changes).
PR Close#32391
This patch introduces a new micro benchmark that performance tests
against map-based style and class bindings in Ivy running together
on the same element.
PR Close#32401
This patch introduces a new micro benchmark that performance tests
against style and class bindings in Ivy running together on the same
element.
PR Close#32401
Extend the vocabulary of the `providedIn` to also include `'platform'` and `'any'`` scope.
```
@Injectable({
providedId: 'platform', // tree shakable injector for platform injector
})
class MyService {...}
```
PR Close#32154
Initially the `missing-injectable` migration was only being used
in google3. Wiring the migration up in the CLI migrations was
planned to be done in a follow-up.
PR Close#32349
TestBed.get is not type safe, fixing it would be a massive breaking
change. The Angular team has proposed replacing it with TestBed.inject
and deprecate TestBed.get.
Deprecation from TestBed.get will come as a separate commit.
Issue #26491Fixes#29905
BREAKING CHANGE: Injector.get now accepts abstract classes to return
type-safe values. Previous implementation returned `any` through the
deprecated implementation.
PR Close#32200
Currently the undecorated classes migration decorates base classes if no
explicit constructor is defined on all classes in the inheritance chain.
We only want to decorate base classes which define a constructor that is
inherited. Additionally for best practice, all classes in between the class
that inherits the constructor and the one that defines it are also decorated.
PR Close#32319
The `undecorated-classes-with-di` migration currently creates invalid object literals from parsed
NGC metadata files if there are object literal properties with keys that contain special characters.
e.g. consider a decorated base class with a host binding using `[class.X]`. Currently the migration
parses and converts the metadata to TypeScript code but incorrectly uses `[class.X]` unquoted as
identifier.
PR Close#32319
Apparently the names of the bazel test targets in the schematics are
incorrect. This commit updates the target names to match their bazel
package name.
PR Close#32318
ec4381dd40 enabled Ivy by default. This is
problematic as migrations like `undecorated-classes-with-di` depend on the
`AngularCompilerProgram` (NGC) in order to perform the migration from
version 8 to version 9. In order to ensure that the migration always runs
with NGC (and doesn't get the `NgtscProgram`), we need to explicitly disable
ivy when creating the `@angular/compiler-cli` program for the migration.
PR Close#32318
Reworks the compiler to output the factories for directives, components and pipes under a new static field called `ngFactoryFn`, instead of the usual `factory` property in their respective defs. This should eventually allow us to inject any kind of decorated class (e.g. a pipe).
**Note:** these changes are the first part of the refactor and they don't include injectables. I decided to leave injectables for a follow-up PR, because there's some more cases we need to handle when it comes to their factories. Furthermore, directives, components and pipes make up most of the compiler output tests that need to be refactored and it'll make follow-up PRs easier to review if the tests are cleaned up now.
This is part of the larger refactor for FW-1468.
PR Close#31953
Binding metadata are only needed:
- for property bindings;
- when TestBed tests are being run.
This commit guards binding metadata storage with the ngDevMode flag
which saves ~6% of a proerty binding processing time in the production
mode (and reduces bundle size).
PR Close#32317
After a series of recent refactorings `enterView` and `leaveView` became
identical. This PR merges both into one concept of view selectio (similar
to a node selection). This reduces number of concepts and code size.
PR Close#32263
This commit removes all the (duplicated) logic of setting lView[BINDING_INDEX]
from `enterView`. `enterView` is on the critcal path perf-wise so we should
avoid having any logic in there and minimise memory read / write.
This simple refactoring in this PR reduces time spent in noop change detection
by ~12% (from ~800ms down to ~700ms on a local machine where measurements were
taken).
PR Close#32263
Prior to this change, the `BINDING_INDEX` of a given lView was reset after processing a template. However change detection can be triggered as a result of View queries processing, thus leading to subsequent `refreshView` call (and executing a template), which in turn operates with the binding index that is not reset after the previous `refreshView` call. This commit updates the logic to reset binding index before we execute a template, so binding index is correct for instructions inside template function.
PR Close#32201
This commit drops our custom, change-detection specific, equality comparison util
in favour of the standard Object.is which has desired semantics.
There are multiple advantages of this approach:
- less code to maintain on our end;
- avoid NaN checks if both values are equal;
- re-write NaN checks so we don't trigger V8 deoptimizations.
PR Close#32212
Angular hooks come after 2 flavours:
- init hooks (OnInit, AfterContentInit, AfterViewInit);
- check hooks (OnChanges, DoChanges, AfterContentChecked, AfterViewChecked).
We need to do more processing for init hooks to ensure that those hooks
are run once and only once for a given directive (even in case of errors).
As soon as all init hooks execute to completion we are only left with the
checks to execute.
It turns out that keeping track of the remaining init hooks to execute is
rather expensive (multiple LView flags reads, writes and checks). But we can
observe that non of this tracking is needed as soon as all init hooks are
completed.
This PR takes advantage of the above observations and splits hooks processing
functions into:
- init-specific (slower but less common);
- check-specific (faster and more common).
NOTE: there is code duplication in this PR and it is left like this intentinally:
hand-inlining this perf-critical code makes the view refresh process substentially
faster.
PR Close#32131
This commit switches the default value of the enableIvy flag to true.
Applications that run ngc will now by default receive an Ivy build!
This does not affect the way Bazel builds in the Angular repo work, since
those are still switched based on the value of the --define=compile flag.
Additionally, projects using @angular/bazel still use View Engine builds
by default.
Since most of the Angular repo tests are still written against View Engine
(particularly because we still publish VE packages to NPM), this switch
also requires lots of `enableIvy: false` flags in tsconfigs throughout the
repo.
Congrats to the team for reaching this milestone!
PR Close#32219
Initially the plan was to have a migration that adds `@Injectable()` to
all pipes in a CLI project so that the pipes can be injected in Ivy
similarly to how it worked in view engine.
Due to the planned refactorings which ensure that `@Directive`, `@Component`
and `@Pipe` also have a factory definition, this migration is no longer
needed for Ivy. Additionally since it is already disabled (due to
572b54967c) and we have a more generic
migration (known as `missing-injectable)` that could do the same as
`injectable-pipe`, we remove the migration from the code-base.
PR Close#32184
TypeScript downlevels `for-of` loops for ES5 targets. As a result, generated output contains extra code, including a try-catch block, which has code size and performance implications. This is especially important for runtime code where we want to keep it as small as possible. This commit changes `for-of` loops in runtime code to regular `for` loops.
PR Close#32157
Bundle size changed in both zone.js(legacy) and zone-evergreen.js
- zone.js(legacy) package increased a little because the following feature and fixes.
1. #31699, handle MSPointer events PR
2. https://github.com/angular/zone.js/pull/1219 to add __zone_symbol__ customization support
- zone-evergreen.js package decreased because
1. the MSPointer PR only for legacy
2. the Object.defineProperty patch is moved to legacy #31660
PR Close#31975
In VE the `Sanitizer` is always available in `BrowserModule` because the VE retrieves it using injection.
In Ivy the injection is optional and we have instructions instead of component definition arrays. The implication of this is that in Ivy the instructions can pull in the sanitizer only when they are working with a property which is known to be unsafe. Because the Injection is optional this works even if no Sanitizer is present. So in Ivy we first use the sanitizer which is pulled in by the instruction, unless one is available through the `Injector` then we use that one instead.
This PR does few things:
1) It makes `Sanitizer` optional in Ivy.
2) It makes `DomSanitizer` tree shakable.
3) It aligns the semantics of Ivy `Sanitizer` with that of the Ivy sanitization rules.
4) It refactors `DomSanitizer` to use same functions as Ivy sanitization for consistency.
PR Close#31934
In Angular today, the following pattern works:
```typescript
export class BaseDir {
constructor(@Inject(ViewContainerRef) protected vcr: ViewContainerRef) {}
}
@Directive({
selector: '[child]',
})
export class ChildDir extends BaseDir {
// constructor inherited from BaseDir
}
```
A decorated child class can inherit a constructor from an undecorated base
class, so long as the base class has metadata of its own (for JIT mode).
This pattern works regardless of metadata in AOT.
In Angular Ivy, this pattern does not work: without the @Directive
annotation identifying the base class as a directive, information about its
constructor parameters will not be captured by the Ivy compiler. This is a
result of Ivy's locality principle, which is the basis behind a number of
compilation optimizations.
As a solution, @Directive() without a selector will be interpreted as a
"directive base class" annotation. Such a directive cannot be declared in an
NgModule, but can be inherited from. To implement this, a few changes are
made to the ngc compiler:
* the error for a selector-less directive is now generated when an NgModule
declaring it is processed, not when the directive itself is processed.
* selector-less directives are not tracked along with other directives in
the compiler, preventing other errors (like their absence in an NgModule)
from being generated from them.
PR Close#31379
For some reason (on OS/X) this transitive dependency is not being passed
through to the final TS builds that rely on this rule, so the build fails
with a missing file error:
```
The specified path does not exist:
'/.../sandbox/darwin-sandbox/451/execroot/angular/packages/tsconfig-build.json'.
```
PR Close#31943
Introduces a new migration schematic that follows the given
migration plan: https://hackmd.io/@alx/S1XKqMZeS.
First case: The schematic detects decorated directives which
inherit a constructor. The migration ensures that all base
classes until the class with the explicit constructor are
properly decorated with "@Directive()" or "@Component". In
case one of these classes is not decorated, the schematic
adds the abstract "@Directive()" decorator automatically.
Second case: The schematic detects undecorated declarations
and copies the inherited "@Directive()", "@Component" or
"@Pipe" decorator to the undecorated derived class. This
involves non-trivial import rewriting, identifier aliasing
and AOT metadata serializing
(as decorators are not always part of source files)
PR Close#31650
Follow-up to #30993 where we build all Angular packages with
the TypeScript `--strict` flag. The flag improves overall code
health and also helps us catch issues easier.
PR Close#31967
Similar to interpolation, we do not want to completely remove whitespace
nodes that are siblings of an expansion.
For example, the following template
```html
<div>
<strong>items left<strong> {count, plural, =1 {item} other {items}}
</div>
```
was being collapsed to
```html
<div><strong>items left<strong>{count, plural, =1 {item} other {items}}</div>
```
which results in the text looking like
```
items left4
```
instead it should be collapsed to
```html
<div><strong>items left<strong> {count, plural, =1 {item} other {items}}</div>
```
which results in the text looking like
```
items left 4
```
---
**Analysis of the code and manual testing has shown that this does not cause
the generated ids to change, so there is no breaking change here.**
PR Close#31962
Moves the `renderer_to_renderer2` migration google3 tslint rule
into the new `google3` directory. This is done for consistency
as we recently moved all google3 migration rules into a new
`google3` folder (see: f69e4e6f77).
PR Close#31817
Creates a separate bazel target for the google3 migration
tests. The benefit is that it's faster to run tests for
public migrations in development. Google3 lint rules are
usually another story/implementation and the tests are quite
slow due to how TSLint applies replacements.
Additionally if something changes in the google3 tslint rules,
the tests which aren't affected re-run unnecessarily.
PR Close#31817
In Angular today, the following pattern works:
```typescript
export class BaseDir {
constructor(@Inject(ViewContainerRef) protected vcr: ViewContainerRef) {}
}
@Directive({
selector: '[child]',
})
export class ChildDir extends BaseDir {
// constructor inherited from BaseDir
}
```
A decorated child class can inherit a constructor from an undecorated base
class, so long as the base class has metadata of its own (for JIT mode).
This pattern works regardless of metadata in AOT.
In Angular Ivy, this pattern does not work: without the @Directive
annotation identifying the base class as a directive, information about its
constructor parameters will not be captured by the Ivy compiler. This is a
result of Ivy's locality principle, which is the basis behind a number of
compilation optimizations.
As a solution, @Directive() without a selector will be interpreted as a
"directive base class" annotation. Such a directive cannot be declared in an
NgModule, but can be inherited from. To implement this, a few changes are
made to the ngc compiler:
* the error for a selector-less directive is now generated when an NgModule
declaring it is processed, not when the directive itself is processed.
* selector-less directives are not tracked along with other directives in
the compiler, preventing other errors (like their absence in an NgModule)
from being generated from them.
PR Close#31379
Fixes Ivy's directive matching not capturing attribute selectors when there is one class binding, one style binding and a regular binding that precede the attribute that would match the directive. The issue appears to come from the fact that we weren't skipping over style bindings correctly which was throwing the loop off not to go into `bindingsMode` and to skip some of the bindings when matching.
PR Close#31942
Fixes Ivy's `DebugElement.triggerEventHandler` to picking up events that have been registered through a `Renderer2`, unlike ViewEngine.
This PR resolves FW-1480.
PR Close#31845
Prior to this commit, the `schemas` configuration was applied to top-level view only. That leads to problems when using unknown props with elements inside nested views (for example generated as a result of *ngIf). This commit passes `schemas` information down to nested views to make sure that all the checks are consistent.
PR Close#31913
Currently the `DebugElement.listeners` array are retained after the node is destroyed. This means that they'll continue to fire through `triggerEventHandler` and can cause memory leaks. This has already been fixed in Ivy, but these changes fix it in ViewEngine for consistency.
PR Close#31820
nodejs rules 0.34.0 now includes protractor_web_test_suite rule (via new @bazel/protractor rule) so we switch to that location for that rule in this PR so that /packages/bazel/src/protractor can be removed in a future PR
this PR also brings in node toolchain support which was released in nodejs rules 0.33.0. this is a prerequisite for RBE for mac & windows users
bazel schematics also updated with the same. @bazel/bazel 0.28.1 npm package includes transitive dep on hide-bazel-files so we're able to remove an explicit dep on that as well.
PR Close#31824
In `BrowserModule` the value of `LOCALE_ID` is defined in the `APPLICATION_MODULE_PROVIDERS` after `APP_INITIALIZER` has run.
This PR ensures that `LOCALE_ID` is also set for ivy at the same moment which allows the application to fetch the locale from a backend (for example).
Fixes#31465
FW-1436 #resolve
PR Close#31566
Fixes Ivy throwing an error when something is passed in as a `forwardRef` into `@Injectable`'s `useClass` option. The error was being thrown, because we were trying to get the provider factory off of the wrapper function, rather than the value itself.
This PR resolves FW-1335.
PR Close#30532
Matias Niemelä
crisbeto
Pete Bacon Darwin
Mike Casebolt
Miško Hevery
Igor Minar
Greg Magolan
Andrius
Judy Bogart
Pawel Kozlowski
Andrew Scott
Hayouung
Paul Gschwendtner
atscott
Andrew Kushnir
Adam Plumer
Alex Rickabaugh
JoostK
Jithil P Ponnan
zuckjet
Feliks Khantsis
Danny Skoog
Alan Agius
Christopher Dahm
Joey Perrott
Kara Erickson
horn
Lars Gyrup Brink Nielsen
mohax
Filipe Silva
NothingEverHappens
JiaLiPassion
Michael Prentice
Kapunahele Wong
vikerman
Nikita Potapenko
Alex Eagle
Charles Lyding
cexbrayat
Alan
Keen Yee Liau
George Kalpakas
Martin Probst
atscott
thekiba
Carlos Ortiz García
hafiz
Olivier Combe
Erik Pintar