Adds hidden `enable_experimental_chat_threaded_discussions`
setting which will control whether threads show in the UI,
alongside the `ChatChannel.threading_enabled` boolean column,
which does the same. The former is a global switch for this
feature, while the latter can be used to allow single channels
to show this new functionality if the site setting is true.
Neither setting impacts whether `ChatThread` records (which will
be added in a future PR) will be created, they will always be
made regardless.
`last_message_sent_at` could be equal and as a result the order would be random causing random spec failures in plugins/chat/spec/mailers/user_notifications_spec.rb:182
Using a shared channel with per-message permissions means that every client is updated with the channel's 'last_id', even if there are no messages available to them. Per-user channel names avoid this problem - the last_id will only be incremented when there is a message for the given user.
* FIX: correct various mistakes in chat-notification-manager
- The code was still handling global chat through its own variable instead of relying on `ChatStateManager`
- There was a typo were the code was using `this` instead of `opts`
Note notifications are a future big work of this year and this should be heavily reworked and tested.
* linting
This commit introduces the ability to edit the channel
slug from the About tab for the chat channel when the user
is admin. Similar to the create channel modal functionality
introduced in 641e94f, if
the slug is left empty then we autogenerate a slug based
on the channel name, and if the user just changes the slug
manually we use that instead.
We do not do any link remapping or anything else of the
sort, when the category slug is changed that does not happen
either.
When expanding the "Advanced mode" of the date modal, the Timezones
picker was at the bottom of the modal, and expanding it would often
overflow the viewport. This PR moves the elment higher up, therefore
avoiding the overflow.
There's a small width change as well, for better consistency.
* DEV: Rnemae channel path to just c
Also swap the channel id and channel slug params to be consistent with core.
* linting
* channel_path
* params in wrong order
* Drop slugify helper and channel route without slug
* Request slug and route models through the channel model if possible
* Add client side redirection for backwards-compatibility
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Only allow maximum of `50_000` characters for chat drafts. A hidden `max_chat_draft_length` setting can control this limit. A migration is also provided to delete any abusive draft in the database.
The number of drafts loaded on current user has also been limited and ordered by most recent update.
Note that spec files moved are not directly related to the fix.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Co-authored-by: Régis Hanol <regis@hanol.fr>
We've had the UploadReference table for some time now in core,
but it was added after ChatUpload was and chat was just never
moved over to this new system.
This commit changes all chat code dealing with uploads to create/
update/delete/query UploadReference records instead of ChatUpload
records for consistency. At a later date we will drop the ChatUpload
table, but for now keeping it for data backup.
The migration + post migration are the same, we need both in case
any chat uploads are added/removed during deploy.
Learn more about skidding here: https://popper.js.org/docs/v2/modifiers/offset/#skidding-1
This change has two goals:
- Fixes an issue when the user had zoomed the viewport and the popper would position on the opposite side
- Makes msg actions arguably more pleasant to the eye by preventing it to be right aligned with the message container
Prior to this fix trashed channels would still prevent a channel with the same slug to be created. This commit generates a new slug on trash and frees the slug for future usage.
The format used for the slug is: `YYYYMMDD-HHMM-OLD_SLUG-deleted` truncated to the max length of a channel name.
This commit allows us to set the channel slug when creating new chat
channels. As well as this, it introduces a new `SlugsController` which can
generate a slug using `Slug.for` and a name string for input. We call this
after the user finishes typing the channel name (debounced) and fill in
the autogenerated slug in the background, and update the slug input
placeholder.
This autogenerated slug is used by default, but if the user writes anything
else in the input it will be used instead.
Note this commit also slightly changes internal API: channel instead of getChannel and updateCurrentUserChannelNotificationsSettings instead of updateCurrentUserChatChannelNotificationsSettings.
Also destroyChannel takes a second param which is the name confirmation instead of an optional object containing this confirmation. This is to enforce the fact that it's required.
In the future a top level jsdoc config file could be used instead of the hack tempfile, but while it's only an experiment for chat, it's probably good enough.
We refer to the channel name rather than title elsewhere
(including the new channel modal), so we should be consistent.
Title is an internal abstraction, since DM channels cannot have
names (currently).
Also change the name field on channel edit to a input type="text"
rather than a textarea, since we don't want a huge input here.
Added in c2013865d7,
this migration was supposed to only turn off the hashtag
setting for existing sites (since that was the old default)
but its doing it for new ones too because we run all migrations
on new sites.
Instead, we should only run this if the first migration was
only just created, meaning its a new site.
If the enable_experimental_hashtag_autocomplete setting is
enabled, then we should autolink hashtag references to the
archived channels (e.g. #blah::channel) for a nicer UX, and
just show the channel name if not (since doing #channelName
can lead to weird inconsistent results).
Since the poll post handler runs very early in the post creation
process, it's possible to run the handler on an obiviously invalid post.
This change ensures the post's `raw` value is present before
proceeding.
The spec was flaky because it was dependent on order,
when usernames got high enough sequence numbers in them
we would get this error:
> expected to find text "bruce99, bruce100" in "bruce100, bruce99"
Also move selectors into page object and use them in the
spec instead.
There was an issue with channel archiving, where at times the topic
creation could fail which left the archive in a bad state, as read-only
instead of archived. This commit does several things:
* Changes the ChatChannelArchiveService to validate the topic being
created first and if it is not valid report the topic creation errors
in the PM we send to the user
* Changes the UI message in the channel with the archive status to reflect
that topic creation failed
* Validate the new topic when starting the archive process from the UI,
and show the validation errors to the user straight away instead of
creating the archive record and starting the process
This also fixes another issue in the discourse_dev config which was
failing because YAML parsing does not enable all classes by default now,
which was making the seeding rake task for chat fail.
* Firefox now finally returns PerformanceMeasure from performance.measure
* Some TODOs were really more NOTE or FIXME material or no longer relevant
* retain_hours is not needed in ExternalUploadsManager, it doesn't seem like anywhere in the UI sends this as a param for uploads
* https://github.com/discourse/discourse/pull/18413 was merged so we can remove JS test workaround for settings
* FIX: Channel archive N1 when serializing current user
The `ChatChannelSerializer` serializes the archive for the
channel if it is present, however this was causing an N1 for
the current user serializer in the case of DM channels, which
were not doing `includes(:chat_channel_archive)` in the
`ChatChannelFetcher`.
DM channels cannot be archived, so we can just never try to serialize
the archive for DM channels in `ChatChannelSerializer`, which
removes the N1.
* DEV: Add N1 performance spec for latest.html preloading
We modify current user serializer in chat, so it's a good
idea to have some N1 performance specs to avoid regressions
here.
In certain cases, like when `SiteSetting.slug_generation_method`
is set to `none` with certain locales, the autogenerated chat
channel slugs will end up blank. This was causing errors in
unrelated jobs calling `update!` on the channel. Instead, we
should just copy Category behaviour, which does not error
if the autogenerated slug ends up blank. We already allow
for this with chat channel URLs, using `-` in place of the
missing slug.
The problem here was that if your input has an Enter
listener (such as the chat message input) and the
`fill_in(with: str)` string has a `\n` at the end, this
is treated as an Enter keypress, so this `fill_in` was
submitting the chat message.
This commit fixes an issue where the chat message bookmarks
did not respect the user's `bookmark_auto_delete_preference`
which they select in their user preference page.
Also, it changes the default for that value to "keep bookmark and clear reminder"
rather than "never", which ends up leaving a lot of expired bookmark
reminders around which are a pain to clean up.
`last_message_sent_at` has a `NOT_NULL` constraint in the DB so it should be safe to use for sorting.
This was causing two flakeys:
```
1) UserNotifications.chat_summary with public channel email subject with regular mentions includes both channel titles when there are exactly two with unread mentions
Failure/Error: example.run
expected: "[Discourse] New message in Random 62 and Test channel"
got: "[Discourse] New message in Test channel and Random 62"
(compared using ==)
# ./plugins/chat/spec/mailers/user_notifications_spec.rb:203:in `block (6 levels) in <main>'
# ./spec/rails_helper.rb:356:in `block (2 levels) in <top (required)>'
# ./vendor/bundle/ruby/3.1.0/gems/webmock-3.18.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
2) UserNotifications.chat_summary with public channel email subject with regular mentions displays a count when there are more than two channels with unread mentions
Failure/Error: example.run
expected: "[Discourse] New message in Random 62 and 2 others"
got: "[Discourse] New message in Test channel 0 and 2 others"
(compared using ==)
# ./plugins/chat/spec/mailers/user_notifications_spec.rb:236:in `block (6 levels) in <main>'
# ./spec/rails_helper.rb:356:in `block (2 levels) in <top (required)>'
# ./vendor/bundle/ruby/3.1.0/gems/webmock-3.18.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
```
This commit is a series of fixes to improve stability of system tests following the use of threadsafe:
* Jobs.run_immediately in before block was causing issues
* During test a js error could be caused by an undefined this.details in chat-live-pane
* Apply the chat composer click trick everywhere when sending a message, it ensures we are not hiding anything with autocomplete
* There was another case not using send_message yet
This PR removes the limit added to max_users_notified_per_group_mention during #19034 and improve the performance when expanding mentions for large channel or groups by removing some N+1 queries and making the whole process async.
* Fully async chat message notifications
* Remove mention setting limit and get rid of N+1 queries
It should fix flakeys we have due to using_session. This commit is also fixing tests which were failing constantly with treadsafe enabled.
A test has also bene skipped as the issue couldn't be found so far.
More info: https://github.com/teamcapybara/capybara#threadsafe-mode
- improves UI by displaying channel status on it's own line
- ensures channel status is correctly updated right after the request on frontend
- adds status on info page
Recent changes surfaced the various issues with this codepath:
- we were not correctly reseting `messageLookup` leading to us trying to scroll to a non existing message in the view
- we were calling markAsRead which would scroll to the bottom, even if we had a target message
- we were not debouncing fetchMessages, which could cause multiple reload of the messages when loading it with a targetMessageId: first fetch from last read and then immediately fetch from targetMessageId
- other naming inconsistencies
- not handling drawer
This commit also adds tests for classic scenarios related to this use case.
I could repro the same failure by doing: `page.driver.browser.network_conditions = { offline: false, latency: 3000, throughput: 0 }`
Wait shouldn't be needed as we wait for selector, but I couldn't find a better solution on this case for now.
We are all in on system specs, so this commit moves all the chat quoting acceptance tests (some of which have been skipped for a while) into system specs.
The way our markdown raw_html hoisting worked, we only
supported one level of hoisting the HTML content. However
when nesting [chat] transcript BBCode we need to allow
for multiple levels of it. This commit changes opts.discourse.hoisted
to be more constant, and the GUID keys that have the hoisted
content are only deleted by unhoistForCooked rather than
the cook function itself, which prematurely deletes them
when they are needed further down the line.
Honestly seems like it's being in some weird loop for
discourse/hashtag_autocomplete_spec.rb for this:
```ruby
within topic_page.post_by_number(2) do
cooked_hashtags = page.all(".hashtag-cooked", count: 2)
expect(cooked_hashtags[0]["outerHTML"]).to eq(<<~HTML.chomp)
<a class=\"hashtag-cooked\" href=\"#{category.url}\" data-type=\"category\" data-slug=\"cool-cat\"><svg class=\"fa d-icon d-icon-folder svg-icon svg-node\"><use href=\"#folder\"></use></svg><span>Cool Category</span></a>
HTML
expect(cooked_hashtags[1]["outerHTML"]).to eq(<<~HTML.chomp)
<a class=\"hashtag-cooked\" href=\"#{tag.url}\" data-type=\"tag\" data-slug=\"cooltag\"><svg class=\"fa d-icon d-icon-tag svg-icon svg-node\"><use href=\"#tag\"></use></svg><span>cooltag</span></a>
HTML
end
```
I see this many times in the full logs with `SELENIUM_VERBOSE_DRIVER_LOGS=1`:
```
COMMAND FindElements {
"using": "css selector",
"value": "#post_2"
}
Followed by:
COMMAND FindChildElements {
"id": "26dfe542-659b-46cc-ac8c-a6c2d9cbdf0a",
"using": "css selector",
"value": ".hashtag-cooked"
}
```
Over and over and over, there are 58 such occurrences. I am beginning to
think `within` is just poison that should be avoided.
Previously, calling `sign_in` would cause the browser to be redirected to `/`, and would cause the Ember app to boot. We would then call `visit()`, causing the app to boot for a second time.
This commit adds a `redirect=false` option to the `/session/username/become` route. This avoids the unnecessary boot of the app, and leads to significantly faster system spec run times.
In local testing, this takes the full system-spec suite for chat from ~6min to ~4min.
1. `test()` and `render()` instead of `componentTest()`
2. Angle brackets
3. `strictEqual()`/`true()`/`false()` assertions
This removes all remaining uses of `componentTest` from core
Following the removal of user in current_user_membership we were now doing: `User.create(null)`.
I don't think it has any impact but this is just wasteful and could lead to issues if used.
The client already has all the information about the current user so
there is no need for us to be serializing the current `User` object each
time per channel that is preloaded.
In production, profiling shows that this unneeded serializing
adds a roughly 5% overhead to a request.
- chat-message is not using chat-api yet and the `jsonMode` shouldn't have been added
- correctly error on `getChannel` not found
- adds/correct relevant system tests
Note this is a very large PR, and some of it could have been splited, but keeping it one chunk made it to merge conflicts and to revert if necessary. Actual new code logic is also not that much, as most of the changes are removing js tests, adding system specs or moving things around.
To make it possible this commit is doing the following changes:
- converting (and adding new) existing js acceptances tests into system tests. This change was necessary to ensure as little regressions as possible while changing paradigm
- moving away from store. Using glimmer and tracked properties requires to have class objects everywhere and as a result works well with models. However store/adapters are suffering from many bugs and limitations. As a workaround the `chat-api` and `chat-channels-manager` are an answer to this problem by encapsulating backend calls and frontend storage logic; while still using js models.
- dropping `appEvents` as much as possible. Using tracked properties and a better local storage of channel models, allows to be much more reactive and doesn’t require arbitrary manual updates everywhere in the app.
- while working on replacing store, the existing work of a chat api (backend) has been continued to support more cases.
- removing code from the `chat` service to separate concerns, `chat-subscriptions-manager` and `chat-channels-manager`, being the largest examples of where the code has been rewritten/moved.
Future wok:
- improve behavior when closing/deleting a channel, it's already slightly buggy on live, it's rare enough that it's not a big issue, but should be improved
- improve page objects used in chat
- move more endpoints to the API
- finish temporarily skipped tests
- extract more code from the `chat` service
- use glimmer for `chat-messages`
- separate concerns in `chat-live-pane`
- eventually add js tests for `chat-api`, `chat-channels-manager` and `chat-subscriptions-manager`, they are indirectly heavy tested through system tests but it would be nice to at least test the public API
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
Prior to this change, each request executed 2 Redis calls per chat channel
that was loaded. The number of Redis calls quickly adds up once a user
is following multiple channels.
This commit adds an index for the query which the chat plugin executes
multiple times when preloading user data in `Chat::ChatChannelFetcher.unread_counts`.
Sample query plan from a query I grabbed from one of our production
instance.
Before:
```
QUERY PLAN
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
GroupAggregate (cost=10.77..696.67 rows=7 width=16) (actual time=7.735..7.736 rows=0 loops=1)
Group Key: cc.id
-> Nested Loop (cost=10.77..696.54 rows=12 width=8) (actual time=7.734..7.735 rows=0 loops=1)
Join Filter: (cc.id = cm.chat_channel_id)
-> Nested Loop (cost=0.56..76.44 rows=1 width=16) (actual time=0.011..0.037 rows=7 loops=1)
-> Index Only Scan using chat_channels_pkey on chat_channels cc (cost=0.28..22.08 rows=7 width=8) (actual time=0.004..0.014 rows=7 loops=1)
Index Cond: (id = ANY ('{192,300,228,727,8,612,1633}'::bigint[]))
Heap Fetches: 0
-> Index Scan using user_chat_channel_unique_memberships on user_chat_channel_memberships uccm (cost=0.28..7.73 rows=1 width=8) (actual time=0.003..0.003 rows=1 loops=7)
Index Cond: ((user_id = 1338) AND (chat_channel_id = cc.id))
-> Bitmap Heap Scan on chat_messages cm (cost=10.21..618.98 rows=89 width=12) (actual time=1.096..1.097 rows=0 loops=7)
Recheck Cond: (chat_channel_id = uccm.chat_channel_id)
Filter: ((deleted_at IS NULL) AND (user_id <> 1338) AND (id > COALESCE(uccm.last_read_message_id, 0)))
Rows Removed by Filter: 2085
Heap Blocks: exact=7106
-> Bitmap Index Scan on index_chat_messages_on_chat_channel_id_and_created_at (cost=0.00..10.19 rows=270 width=0) (actual time=0.114..0.114 rows=2085 loops=7)
Index Cond: (chat_channel_id = uccm.chat_channel_id)
Planning Time: 0.408 ms
Execution Time: 7.762 ms
(19 rows)
```
After:
```
QUERY PLAN
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
GroupAggregate (cost=5.84..367.39 rows=7 width=16) (actual time=0.130..0.131 rows=0 loops=1)
Group Key: cc.id
-> Nested Loop (cost=5.84..367.26 rows=12 width=8) (actual time=0.129..0.130 rows=0 loops=1)
Join Filter: (cc.id = cm.chat_channel_id)
-> Nested Loop (cost=0.56..76.44 rows=1 width=16) (actual time=0.038..0.069 rows=7 loops=1)
-> Index Only Scan using chat_channels_pkey on chat_channels cc (cost=0.28..22.08 rows=7 width=8) (actual time=0.011..0.022 rows=7 loops=1)
Index Cond: (id = ANY ('{192,300,228,727,8,612,1633}'::bigint[]))
Heap Fetches: 0
-> Index Scan using user_chat_channel_unique_memberships on user_chat_channel_memberships uccm (cost=0.28..7.73 rows=1 width=8) (actual time=0.006..0.006 rows=1 loops=7)
Index Cond: ((user_id = 1338) AND (chat_channel_id = cc.id))
-> Bitmap Heap Scan on chat_messages cm (cost=5.28..289.71 rows=89 width=12) (actual time=0.008..0.008 rows=0 loops=7)
Recheck Cond: ((chat_channel_id = uccm.chat_channel_id) AND (id > COALESCE(uccm.last_read_message_id, 0)) AND (deleted_at IS NULL))
Filter: (user_id <> 1338)
-> Bitmap Index Scan on index_chat_messages_on_chat_channel_id_and_id (cost=0.00..5.26 rows=90 width=0) (actual time=0.008..0.008 rows=0 loops=7)
Index Cond: ((chat_channel_id = uccm.chat_channel_id) AND (id > COALESCE(uccm.last_read_message_id, 0)))
Planning Time: 1.217 ms
Execution Time: 0.188 ms
(17 rows)
```
* UX: added fadeout + hashtag styling
UX: add full name to autocomplete
UX: autocomplete mentions styling
UX: emoji styling user status
UX: autocomplete emoji
* DEV: Move hashtag tag counts into new secondary_text prop
* FIX: Add is-online style to mention users via chat
UX: make is-online avatar styling globally available
* DEV: Fix specs
* DEV: Test fix
Co-authored-by: Martin Brennan <martin@discourse.org>
Use `Chat::ChatChannelFetcher.secured_public_channel_search` directly
checking for existence instead of running through
`Chat::ChatChannelFetcher.secured_public_channels` which executes 7 more
DB queries.
Follow up to a review in #18937, this commit changes the HashtagAutocompleteService to no longer use class variables to register hashtag data sources or types in context priority order. This is to address multisite concerns, where one site could e.g. have chat disabled and another might not. The filtered plugin registers I added will not be included if the plugin is disabled.
In both ChatMessage#rebake! and in ChatMessageProcessor
when we were calling ChatMessage.cook we were missing the
user_id to cook with, which causes missed hashtag cooks
because of missing permissions.
Previously, restricted category chat channel was available for all groups - even `readonly`. From now on, only user who belong to group with `create_post` or `full` permissions can access that chat channel.
* DEV: Remove enable_whispers site setting
Whispers are enabled as long as there is at least one group allowed to
whisper, see whispers_allowed_groups site setting.
* DEV: Always enable whispers for admins if at least one group is allowed.
In #15474 we introduced dedicated support for date ranges. As part of that
change we added a fallback of "magic" date ranges, which treats dates in
any paragraph with exactly two dates as a range. There were discussions
about migrating all such paragraphs to use the new date range element, but
it was ultimately decided against.
This change removes the fallback and, as a bonus, adds support for multiple
date ranges in the same paragraph.
This introduces another "section" of queries to the
hashtag autocomplete search, which returns results for
each type that start with the search term. So now results
will be in this order, and within these sections ordered
by the types in priority order:
1. Exact matches sorted by type
2. "starts with" sorted by type
3. Everything else sorted by type then name within type
There is no need to duplicate check chat messages when they are being
edited but not having their message text changed. This was leading to
a validation error when adding/removing an upload but not changing the
message text.
FEATURE: Chat and Sidebar are now on by default
- Set the sidebar site setting to be enabled by default
- Set the chat site setting to be enabled by default
- Updated existing specs that assumed the original default
- Use a migration to keep old defaults for existing sites
Instead of passing `user` to `guardian.can_chat?`, we
can just use the inner `@user` that is part of the guardian
instance already to determine whether that user can chat,
since this is how it works for all other usages of guardian
even within chat.
1. "What Goes Up Must Come Down" – if you subscribe to message bus, make sure you also unsubscribe
2. When you unsubscribe - remove only your subscription, not **all** subscriptions on given channel
Attempt #2. The first attempt tried to extend a core `@bound` method in new-user-narrative plugin which did not work. I reworked that plugin in the meantime. This new PR also cleans up message bus subscriptions in now core-merged chat plugin.
We must set `treatAsTextarea` to true when using autocomplete
in the chat composer, since it is at the bottom of the screen
we always want to show it above the composer. This fixes the
issue where the hashtag autocomplete results went behind the
keyboard on mobile (which was not happening for mentions).
Previously with this experimental feature a user would be
able to search for public channels for public categories
using the new #hashtag system even if they couldn't chat.
This commit fixes the hole.
This commit allows us to type # in the UI and present autocomplete
results immediately with the following logic for the topic composer,
and reversed for the chat composer:
* Categories the user can access and has not muted sorted by `topic_count`
* Tags the user can access and has not muted sorted by `topic_count`
* Chat channels the user is a member of sorted by `messages_count`
So in effect, we allow searching for hashtags without a search term.
To do this we add a new `search_without_term` to each data source so
each one can define how it wants to handle this logic.
This new site setting replaces the
`enable_experimental_sidebar_hamburger` and `enable_sidebar` site
settings as the sidebar feature exits the experimental phase.
Note that we're replacing this without depreciation since the previous
site setting was considered experimental.
Internal Ref: /t/86563
* FEATURE: Enforce mention limits for chat messages
The first part of these changes adds a new setting called `max_mentions_per_chat_message`, which skips notifications when the message contains too many mentions. It also respects the `max_users_notified_per_group_mention` setting
and skips notifications if expanding a group mention would exceed it.
We also include a new component to display JIT warning for these limits to the user while composing a message.
* Simplify ignoring/muting filter in chat_notifier
* Post-send warnings for unsent warnings
* Improve pluralization
* Address review feedback
* Fix test
* Address second feedback round
* Third round of feedback
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This commit adds the messages_count column for ChatChannel messages,
which is the number of not-deleted messages in the channel.
This is not updated every time a message is created or deleted in a
channel, so it should not be displayed in the UI.
It is updated eventually via Jobs::ChatPeriodicalUpdates, which
will have additional functions in future after being introduced
here.
Also update these counts for existing channels in a post migration.
User options were serialized at the root level of CurrentUserSerializer,
but UserSerializer has a user_option field. This inconsistency caused
issues in the past because user_option fields had to be duplicated on
the frontend.
The settings tab of each category channel should now present the option to allow or disallow channel wide mentions: @here and @all.
When disallowed, using these mentions in the channel should have no effect.
1. Originally the feature did "Scroll to new posts when user is near bottom of PM" (74e1889924)
2. Then that feature was limited to "Only scroll to posts that are not your own in PMs." (4a26561927)
3. It was limited further to "Only scroll PMs on new message" (eaf7746ec9)
4. And later to "only scroll to bottom for discobot" (267d129f38)
5. And the code was relegated to new-user-narrative plugin (48b7696dbc)
I don't think it's worth it to keep this scrolling code just for this very small specific case.
This did potentially confict with other post scrolling code, and also using `modifyClass` is something we'd like to avoid.
There must have been a small loophole that allowed
setting the channel slug in the DB which has led to
conflicts in some cases.
This commit fixes the conflicting chat channel
slugs and then changes the channel slug index
to a unique one in the DB.
This commit adds variousMessageBus.last_ids to serializer payloads
for chat channels and the chat view (for chat live pane) so
we can use those IDs when subscribing to MessageBus channels
from chat.
This allows us to ensure that any messages created between the
server being hit and the UI loaded and subscribing end up being
delivered to the client, rather than just silently dropped.
This commit also fixes an issue where we were subscribing to
the new-messages and new-mentions MessageBus channels multiple
times when following/unfollowing a channel multiple times.
`ember-cached-decorator-polyfill` uses a Babel transformation to apply this polyfill in core. Adding that Babel transformation to themes and plugins will be complex, so we use this to patch it at runtime. This can be removed once `@glimmer/tracking` is updated to a version
with native `@cached` support.
1. "What Goes Up Must Come Down" – if you subscribe to message bus, make sure you also unsubscribe
2. When you unsubscribe - remove only your subscription, not **all** subscriptions on given channel
`reviewable.chat_channel` is a plain javascript object from the server's JSON response. We need to turn it into a true `ChatChannel` object before passing to `<ChatChannelTitle>`
This commit also converts `<ReviewableChatMessage>` to a Glimmer component
In the past, the result of template compilation would be stored directly in `Ember.TEMPLATES`. Following the move to more modern ember-cli-based compilation, templates are now compiled to es6 modules. To handle forward/backwards compatibility during these changes we had logic in `discourse-boot` which would extract templates from the es6 modules and store them into the legacy-style `Ember.TEMPLATES` object.
This commit removes that shim, and updates our resolver to fetch templates directly from es6 modules. This is closer to how 'vanilla' Ember handles template resolution. We still have a lot of discourse-specific logic, but now it is centralised in one location and should be easier to understand and normalize in future.
This commit should not introduce any behaviour change.
- Multiple style improvements
- adds last sent message date to the view
Co-authored-by: chapoi <charlie@discourse.org>
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This commit introduce a new API for registering callbacks, which we'll execute when a user gets destroyed, and the `delete_posts` opt is true. The chat plugin registers one callback and queues a job to destroy every message from that user in batches.
* FIX: Unsilence users on chat message flag disagree.
We have an auto silence rule in place for chat message flags, so we need to unsilence users if the flag gets rejected.
Additionally, it also fixes the `disagree_and_restore` action, which wasn't recovering a deleted message.
* Update plugins/chat/spec/models/reviewable_chat_message_spec.rb
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Only allow maximum of 6000 characters for chat messages when they
are created or edited. A hidden setting can control this limit,
6000 is the default.
There is also a migration here to truncate any existing messages to
6000 characters if the message is already over that and if the
chat_messages table exists. We also set cooked_version to NULL
for those messages so we can identify them for rebake.
The drawer is registering events which are expecting the drawer to always be present which was not the case anymore. A previous refactor also changed this component to be tagless.
Refines the behavior of clicking the chat icon in mobile and when in drawer mode as follows: If chat is open, clicking the icon takes you to the index.
- better handling of drawer state using chat state manager
- removes various float and topic occurrences to use drawer
- ensures user can chat before doing a lot of chat setup
- fixes a bug which was creating presence errors in tests
- removes dead code
When searching for categories it is possible for
a child category to have a slug that matches the term
exactly, but will not be found by .lookup since we
don't return these categories unless the ref matches
parent:child.
Introduces a search_sort method to each hashtag data
source so they can provide their custom sort logic of
results, in category's case putting all matching slugs
to the top regardless of parent/child relationship
then sorting by text.
* Do not search category name when searching channels to avoid
confusing results
* Overflow text in autocomplete menu with ... if it is too long
* Make autocomplete menu less height
This changes the hashtag search to first do a lookup to find
results where the slug exactly matches the
search term. Now when we search for hashtags, the
exact matches will be found first and put at the top of
the results.
`ChatChannelFetcher` has also been modified here to allow
for more options for performance -- we do not need to
query DM channels for secured IDs when looking up or searching
channels for hashtags, since they should never show in
results there (they have no slugs). Nor do we need to include
the channel archive records.
Also changes the limit of hashtag results to 20 by default
with a hidden site setting, and makes it so the scroll for the
results is overflowed.
Adds the description as a title="" attribute on the hashtag
autocomplete search items for tags, categories, and channels.
These descriptions can be seen by the user since they are
able to see the results that are returned by the search via
Guardian checks.
Sets the chat_allowed_groups to staff (the old default) in the database for
people who already have chat enabled if they did not already change it.
The assumption is that most people who this applies to will be
upgrading from a version that has neither of these two PRs (
the other PR being #19116) to a version that has both of these PRs.
So, for existing site with chat enabled who haven’t set groups, we
want to persist the value which is more likely to match what that are
upgrading from (staff).
People who don’t yet have chat enabled should get the new value (TL1
and staff) when they do enable it.
Follow up to 05b740036e
Currently when a category is deleted, if it has an associated chat
channel, the latter won’t be deleted automatically.
The fix is quite simple as we were simply missing a `dependent:
:destroy` option on the existing relation.
7e39a21de1
broke the explanation of the check box on `create-channel` view.
Actions:
- uses core yes_value/no_value
- re-add the correct translation for `enable_auto_join_users`
- removes `disable_auto_join_users` which is not used anymore
- prevents menu to hide underlying text
- prevents `chat-message-actions` to close when hovering dropdown of 3
dots button as mouse would hover an other message due to the small space
between `chat-message-actions` menu and the dropdown of the 3 dots
button
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in
JavaScript). If your code does not include test coverage, please include
an explanation of why it was omitted. -->
By doing this, we will:
* Have an open, but safe default People reach `@trust_level_1` pretty
quickly, but `@trust_level_0` is still excluded by default, to limit new
accounts joining and immediately spamming or otherwise abusing channels.
* Make it easier to change the default By keeping `@staff` in the
default, we make it easy for admins to remove `@trust_level_1` and
optionally add additional groups to their liking.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
This setting limits the number of users in a direct message. 0 means you can only create a direct message with yourself.
Co-authored-by: David McClure <dave@xerotrope.org>
Previously `this.chatService.appEvents.on(
"chat:user-tracking-state-changed"...)` was registered on constructor and disabled on `willDestroy`. Constructor is evaluated only once, so when the section was collapsed and collapsed then the events were not observed anymore.
didInsert allows evaluating code each time a component is rendered.
This implementation attempts to be more resilient to background tab.
Notes:
- adds support for immediate arg in @debounce decorators
- fixes a bug in discourseDebounce which was not supporting immediate arg in tests
- chat-audio-manager has no tests as audio requires real user interaction and is hard to test reliably
- Note this is also tweaking the UI a little bit as we are now using links/buttons in the header as needed
- It disables the find ideal channel in drawer mode, if loading `/chat` in drawer mode it will either reopen at the last position or just stay on index
- allows to scroll while hovering the menu
- correctly changes message background color while hovering menu
- prevents a bug where it would sometimes close the menu while moving from menu to the 3 dots expanded dropdown. This was caused by the gap between header/body of the 3 dots dropdown, which would sometimes allow to create a mouseover event on a possible different underlying message
- removes recent/favorite reactions on drawer mode
- grayscale reactions until hover
- boxshadow on msgactions container
- removes useless code
Toggling channel settings shows a status message when saved. This status message is not accessible to screen readers. This commit ensures that the status message is made accessible.
The mailer in charge of sending chat summary emails applies a filter to ensure only members of groups listed in the `chat allowed groups` setting receive them. However, when you set it to `everyone`, nobody will be notified because
we treat this group differently and don't create `GroupUser` records for every user on the site.
This commit changes the mailer to skip the filter when the `everyone` ID is in the list.
This commit automatically ensures that category channels
have slugs when they are created or updated based on the
channel name, category name, or existing slug. The behaviour
has been copied from the Category model.
We also include a backfill here with a simplified version
of Slug.for with deduplication to fill the slugs for already
created Category chat channels.
The channel slug is also now used for chat notifications,
and for the UI and navigation for chat. `slugifyChannel`
is still used, but now does the following fallback:
* Uses channel.slug if it is present
* Uses channel.escapedTitle if it is present
* Uses channel.title if it is present
In future we may want to remove this altogether
and always rely on the slug being present, but this
is currently not possible because we are not generating
slugs for DM channels at this point.
Since the migration was added as a post migration, we'll try to add the constraint first, causing a NotNullViolation exception.
This only affects sites that were last deployed more than two days ago.
Clicking a link of the sidebar will now open the drawer and load the correct channel.
This solution should correctly solve these cases:
closing drawer, clicking sidebar channel, should open the drawer on correct channel
visiting /chat then visiting / and clicking sidebar channel, should open full page chat on correct channel
Currently it’s not possible to delete a category if an associated chat
channel is present even if there are no messages in this channel.
This can lead to annoying situations for our users.
This patch addresses the issue by checking if the channel is empty
instead of just checking if there is a channel.
Our method of loading a subset of client settings into tests via
tests/helpers/site-settings.js can be improved upon. Currently we have a
hardcoded subset of the client settings, which may get out of date and not have
the correct defaults. As well as this plugins do not get their settings into the
tests, so whenever you need a setting from a plugin, even if it has a default,
you have to do needs.setting({ ... }) which is inconvenient.
This commit introduces an ember CLI build step to take the site_settings.yml and
all the plugin settings.yml files, pull out the client settings, and dump them
into a variable in a single JS file we can load in our tests, so we have the
correct selection of settings and default values in our JS tests. It also fixes
many, many tests that were operating under incorrect assumptions or old
settings.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Follow up to 766bcbc684
Makes ChatMessage.last_editor_id and ChatMessageRevision.user_id
NOT NULL since they are always filled in now and the last commit
had a migration to backfill this data.
Follow up to 766bcbc684
This fixes a gaffe from that commit where I passed in the
guardian to ChatMessageUpdater but then forgot to remove
the old way of setting the guardian and user instance variables
from the chat_message that was passed in.
Also, it moves the ensure_can_edit_message! check from the
controller into ChatMessageUpdater so all the access
checks are in the same place.
This commits makes sure we correctly wait for the end of the transition to reopen the drawer on the correct channel/view. Also fixes a bug when previous URL was `/` and causing a double transition.
Also adds end to end system tests to ensure navigation scenarios are working correctly. This separation will make it easier to implement state in/out from chat.
This commit adds last_editor_id to ChatMessage for parity with Post in
core, as well as adding user_id to the ChatMessageRevision record since
we need to know who is making edits and revisions to messages, in case
in future we want to allow more than just the current user to edit chat
messages. The backfill for data here simply uses the record's creating
user ID, but in future if we allow other people to edit the messages it
will use their ID.
Doing DOM operations in finally would cause them to happen even when the request was a failure. Consequence of these DOM operations would be new request, which would also end up in a 404, and so on.
This commit simply moves the DOM operations in the then block where it should be safe to make.
This is a followup of the previous refactor where we created two new
models to handle all the dedicated logic that was present in the
`ChatChannel` model.
For the sake of consistency, `DMChannel` has been renamed to
`DirectMessageChannel` and the previous `DirectMessageChannel` model is
now named `DirectMessage`. This should help reasoning about direct
messages.
Debouncing inline anonymous functions does not work.
This fixes all instances of that error by extracting the function or using the new `@debounce(delay)` decorator
This allows plugins to colocate component JS and HBS under `/plugins/{name}/assets/javascripts/discourse/components`.
`discourse-presence` is updated to use this new pattern, which also serves as an integration test for this part of the build pipeline.
Martin Brennan
Joffrey JAFFEUX
chapoi
David Taylor
Penar Musaraj
Roman Rizzi
Michael Brown
Jan Cernik
Natalie Tay
Discourse Translator Bot
Jarek Radosz
Kris
Selase Krakani
Alan Guo Xiang Tan
Krzysztof Kotlarek
Rafael dos Santos Silva
Bianca Nenciu
Daniel Waterworth
dependabot[bot]
Ted Johansson
Jordan Vidrine
Andrei Prigorshnev
Blake Erickson
Gerhard Schlager
Keegan George
Loïc Guitaut
maiki