Prior to this patch, if an element is queried and animated for 0 seconds
(just a style() call and nothing else) then the styles applied would not
be properly cleaned up due to their camelCased nature.
PR Close#23633
Fix a corner case where eager providers were getting constructed twice if the provider was requested before the initialization of the NgModule is complete.
PR Close#23559
g3 and the Angular repo have different versions of TypeScript, and
ts.updateIdentifier() has a different signature in the different versions.
There is no way to write a call to the function that will compile in both
versions simultaneously.
Instead, use ts.getMutableClone() as that has the same effect of cloning
the identifier.
PR Close#23550
This commit adds a new compiler pipeline that isn't dependent on global
analysis, referred to as 'ngtsc'. This new compiler is accessed by
running ngc with "enableIvy" set to "ngtsc". It reuses the same initialization
logic but creates a new implementation of Program which does not perform the
global-level analysis that AngularCompilerProgram does. It will be the
foundation for the production Ivy compiler.
PR Close#23455
`ng.performCompilation` can return an `undefined` program, which is not handled by ngc-wrapped.
Avoid crashing by checking for the error return and returning the diagnostics.
PR Close#23468
The bug fixed here steams from the fact that we are traversing too far up
in the views tree hierarchy in the destroyViewTree function.
The logic in destroyViewTree is off if we start removal at an embedded view
without any child views. For such a case we should just clean up (cleanUpView)
this one view without paying attention to next / parent views.
PR Close#23482
When asking the route reuse strategy to retrieve a detached route handle, store the
return value in a local variable for further processing instead of asking again later.
resolves#22474
PR Close#22475
A long time ago Angular used to support both those attribute notations:
- `*attr='binding'`
- `template=`attr: binding`
Because the last notation has been dropped we can refactor the binding parsing.
Source maps will benefit from that as no `attr:` prefix is added artificialy any
more.
PR Close#23460
In certain cases seen in production, simplify() can returned
undefined when simplifying decorator metadata. This has proven tricky
to reproduce in an isolated test, but the fix is simple and low-risk:
don't attempt to spread an undefined set of annotations in the first
place.
PR Close#23349
This patch is in response to #23401 where a non-const enum was being
compiled as an empty object when used in an animation player when
`ng build --prod` was being processed. This patch is a immediate fix
for the issue and #23400 tracks it.
Closes#23401
PR Close#23402
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an opaque token.
For this reson why declare the return value of `defineInjectable` as `never`.
PR Close#23383
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an `OpaqueToken`.
By prefixing the type with `ɵ` we are communicating the the outside world that
the value is not public API and is subject to change without backward compatibility.
PR Close#23371
- Remove default injection value from `inject` / `directiveInject` since
it is not possible to set using annotations.
- Module `Injector` is stored on `LView` instead of `LInjector` data
structure because it can change only at `LView` level. (More efficient)
- Add `ngInjectableDef` to `IterableDiffers` so that existing tests can
pass as well as enable `IterableDiffers` to be injectable without
`Injector`
PR Close#23345
This change changes:
- compiler uses `directiveInject` instead of `inject` for `Directive`s
- unifies the flags in `di` as well as `render3`
- changes the signature of `directiveInject` to match `inject` In prep for #23330
- compiler now generates flags for injection.
Compiler portion of #23342
Prep for #23330
PR Close#23345
In [glob patterns][1], the `*` wildcard is supposed to match 0 or more
characters.
For reference:
- This is also how `*` works in other implementations, such as
`.gitignore` files or Firebase hosting config.
- Some popular JS implementations (e.g. [minimatch][2], [micromatch][3])
work differently, matching 1 or more character (but not 0).
This commit "fixes" the minimal glob support in
`@angular/service-worker` to allow `*` to also match 0 characters.
[1]: https://en.wikipedia.org/wiki/Glob_%28programming%29
[2]: https://www.npmjs.com/package/minimatch
[3]: https://www.npmjs.com/package/micromatch
PR Close#23339
The ServiceWorker will redirect navigation requests that don't match any
`asset` or `data` group to the specified index file. The rules for a
request to be classified as a navigation request are as follows:
1. Its `mode` must be `navigation`.
2. It must accept a `text/html` response.
3. Its URL must match certain criteria (see below).
By default, a navigation request can have any URL except for:
1. URLs containing `__`.
2. URLs to files (i.e. containing a file extension in the last path
segment).
While these rules are fine in many cases, sometimes it is desirable to
configure different rules for the URLs of navigation requests (e.g.
ignore specific URLs and pass them through to the server).
This commit adds support for specifying an optional `navigationUrls`
list in `ngsw-config.json`, which contains URLs or simple globs
(currently only recognizing `!`, `*` and `**`).
Only requests whose URLs match any of the positive URLs/patterns and
none of the negative ones (i.e. URLs/patterns starting with `!`) will be
considered navigation requests (and handled accordingly by the SW).
(This is an alternative implementation to #23025.)
Fixes#20404
PR Close#23339
These files are in the UMD format for greater portablity, and as such
can't be marked as side-effect-free by webpack/build-optimizer/uglify.
PR Close#23366
Detect server environment by checking `typeof window` and schedule render immediately instead of waiting for RAF.
This does not make Angular Elements work on platform-server. This is just the first step.
PR Close#23324
All our package labels are `npm_package` so the bazel build reports a bunch of identical actions running, like
```
Angular Packaging: rolling up npm_package; 31s darwin-sandbox
Angular Packaging: rolling up npm_package; 30s darwin-sandbox
Angular Packaging: rolling up npm_package; 29s darwin-sandbox
Angular Packaging: rolling up npm_package; 27s darwin-sandbox
Angular Packaging: rolling up npm_package; 26s darwin-sandbox
Angular Packaging: rolling up npm_package; 23s darwin-sandbox
Angular Packaging: rolling up npm_package; 19s darwin-sandbox
Angular Packaging: rolling up npm_package; 11s darwin-sandbox
```
PR Close#23318
The 'stringify' function prints an object as [Object object] which
is not very helpful in many cases, especially in a diagnostics
message. This commit changes the behavior to pretty print an object.
PR Close#22689
When compiling templates the compiler would often bind to
closest context rather than the component context.
The only time one should be binding to the cont component is
in explicit cases where the inner template declares local variable.
PR Close#23168
Given
```
<div *ngFor=”…” (click)=“doSomething()”>
```
Before `doSomething` would execute on the inner template context, which
is incorrect. The correct behavior is to execute on the top level context
of the component.
PR Close#23168
rxjs 6.0.0 breaks strictMetadataEmit as they now publish a .d.ts file with a
structure like:
declare export class Subscription {
static EMPTY: Subscription;
}
This generates metadata which contains an error, and fails the strictMetadataEmit
validation. There is nothing a library author can do in this situation except to
set strictMetadataEmit to false.
The spirit of strictMetadataEmit is to validate that the author's library doesn't
do anything that will break downstream users. This failure is a corner case which
causes more harm than good, so this commit disables validation for metadata
collected from .d.ts files.
Fixes#22210
PR Close#23275
Lowering expressions in flat module metadata is desirable, but it won't
work without some rearchitecting. Currently the flat module index source
is added to the Program and therefore must be determined before the rest
of the transforms run. Since the lowering transform changes the set of
exports needed in the index, this creates a catch-22 in the index
generation.
This commit causes the flat module index metadata to be generated using
only those transforms which are "safe" (don't modify the index).
PR Close#23226
As we no longer create native (RNode) comment nodes for containers,
we need to execute logic for finding a next sibiling node with RNode
when inserting a view.
The mentioned logic need to be updated for the case of dynamically
created containers (LContainerNode). Indeed, we need to be able to
descend into dynamically inserted views while looking for a RNode.
To achieve this we need to have a pointer from a host LNode to a
dynamically created LContainerNode).
PR Close#23193
In pipes the content of these tags is now generated automatically.
In directives these tags have been converted to `@usageNotes` tags,
but in the future me might find a way to generate that usage too.
PR Close#23062
- properly display initial checked state
- properly remove a todo
Please note that the 'archive' option still doesn't
work correctly as listening to component outputs doesn't
seem to work (onArchive() is never called).
PR Close#23161
Currently, the flat module index metadata is produced directly from
the source metadata. The compiler, however, applies transformations
on the Typescript sources during transpilation, and also equivalent
transformations on the metadata itself. This transformed metadata
doesn't end up in the flat module index.
This changes the compiler to generate the flat module index metadata
from its transformed version instead of directly from source.
PR Close#23129
Computing the value of loadChildren does not work externally, as the CLI
needs to be able to detect the paths referenced to properly set up
codesplitting. However, internally, different approaches to codesplitting
require hashed module IDs, and the computation of those hashes involves
something like:
{path: '...', loadChildren: hashFn('module')}
ngc should lower loadChildren into an exported constant in that case.
This will never break externally, because loadChildren is always a
string externally, and a string won't get lowered.
PR Close#23088
Currently the context for inject() is only set when the token is seen
for the first time. This has two issues:
* It should always be set when injecting from that injector, because
a constructor may wish to call inject() directly.
* If an NgModuleFactory is .create()'d twice, and an ngInjectableDef
token is requested from each of them, the second time will fail.
This is because the first injection adds the provider definition
and calls the factory, and the provider definitions are shared.
The second injector will see the provider definition and call the
factory to create an instance, but without setting the correct
context for inject().
Fixes angular/material2#10586.
PR Close#23148
Remove `containerRefreshStart` and `containerRefreshEnd` instruction
from the output.
Generate directives as a list in `componentDef` rather than inline into
instructions. This is consistent in making selector resolution runtime
so that translation of templates can follow locality.
PR Close#22921
This commit modifies the compilation to emit metadata.json files when
compiled under Blaze. The default behavior of ngc is to emit metadata
only when the --flatModuleOutFile flag is specified, but this mode
is not used in Blaze.
Emitting metadata for individual Angular components is needed for
Angular Language Service to work with projects compiled with Blaze.
PR Close#23049
Under some circumstances (possibly related to opening Chrome DevTools),
requests are made with `cache: 'only-if-cached'` and `mode: 'no-cors'`.
These request will eventually fail, because `only-if-cached` is only
allowed to be used with `mode: 'same-origin'`.
This is likely a bug in Chrome DevTools.
This commit avoids errors related to such requests by not handling them.
Fixes#22362
PR Close#22883
Previously, when trying to fetch `ngsw.json` (e.g. during
`checkForUpdate()`) while either the client or the server were offline,
the ServiceWorker would enter a degrade mode, where only existing
clients would be served. This essentially meant that the ServiceWorker
didn't work offline.
This commit fixes it by differentiating offline errors and not entering
degraded mode. The ServiceWorker will remain in the current mode until
connectivity to the server is restored.
Fixes#21636
PR Close#22883
In Ivy mode we rewrite references to Injector to INJECTOR in ngInjectableDef, to fix tree-shaking.
This changes the rewrite to happen always, even in non-Ivy mode, and makes Angular understand
INJECTOR across the board at runtime.
PR Close#23008
This allows a bundle index to be re-exported by a higher-level module without fear of collisions.
Under bazel, we always set the prefix to be underscore-joined workspace, package, label
PR Close#23007
Previously, @Injectable() would generate an ngInjectableDef on the type it was
decorating, even if that type already had a compiled ngInjectableDef, overwriting
the compiled version.
PR Close#22943
This patch ensures that if a numeric state name value in an animation
is detected then it will not throw an error. Normally this wouldn't
occur, but some JS optimizers may convert a quoted numeric value
(like "1" to 1) in some cases to save space. This patch makes sure
that Angular doesn't throw an error when this occurs.
PR Close#22923
ngc knows to filter out d.ts inputs, but the logic accidentally
depended on whether it had a previous Program lying around.
Fixing that logic puts ngc on the fast code path, but in that code
path it must be able to merge tsickle EmitResults, so we need to
plumb the tsickle.mergeEmitResults function through all the intervening
APIs. The bulk of this change is that plumbing.
PR Close#22899
'remove' method not removing url from state.map
'accessed' method not removing 'previous' reference from existing node when it becomes the head
Fixes#22218Fixes#22768
PR Close#22769
Newer version of TS is stricter about types and flags counter-variant
types in some situations. This change inlines the DirectiveDefArgs
into the arguments which:
1) removes the inheritance which caused the issue and
2) Makes it more friendly to IDEs since they will not report comments.
Closes#22877Closes#22843
PR Close#22897
This lets projects like Material change ng_package "bundle index" files to non-conflicting paths
Currently packages like @angular/core ship with the generated metadata
in a path like 'core.js' which overwrites one of the inputs.
Angular material puts the generated file in a path like 'index.js'
Either way these files generated by ng_module rules have the potential
to collide with inputs given by the user, which results in an error.
Instead, give users the freedom to choose a different non-conflicting name.
Also this refactors the ng_package rule, removing the redundant
secondary_entry_points attribute.
Instead, we assume that any ng_module in the deps with a module_name
attribute is a secondary entry point.
PR Close#22814
Changes would not propagate to a value in downgraded component in case you had two-way binding and listening to a value-change, e.g. [(value)]="value" (value-change)="fetch()"
Closes#22734
PR Close#22772
This adds compilation of @NgModule providers and imports into
ngInjectorDef statements in generated code. All @NgModule annotations
will be compiled and the @NgModule decorators removed from the
resultant js output.
All @Injectables will also be compiled in Ivy mode, and the decorator
removed.
PR Close#22458
Moves the status reporting from the issue #21706 to a file that
can be updated as changes are being made. This addresses one of the
comments on the issue and allows better tracking of updates to this
status and changes made.
PR Close#22751
This flag is picked up by webpack v4 and used for more agressive optimizations.
Our code is already side-effect free, because that's what we needed for build-optimizer to work.
PR Close#22785
BREAKING CHANGE:
The `<template>` tag was deprecated in Angular v4 to avoid collisions (i.e. when
using Web Components).
This commit removes support for `<template>`. `<ng-template>` should be used
instead.
BEFORE:
<!-- html template -->
<template>some template content</template>
# tsconfig.json
{
# ...
"angularCompilerOptions": {
# ...
# This option is no more supported and will have no effect
"enableLegacyTemplate": [true|false]
}
}
AFTER:
<!-- html template -->
<ng-template>some template content</ng-template>
PR Close#22783
Angular Package Format v6 stops bundling files in the esm5 and esm2015
directories, now that Webpack 4 can tree-shake per-file.
Adds some missing files like package.json to make packages closer to
what we publish today.
Refactor ng_package to be a type of npm_package and re-use the packaging
action from that rule.
PR Close#22782
Works around an issue with TypeScript 2.6 and 2.7 that causes
the tranformer emit to emit incorrect escapes for css string
literals.
Fixes: #22774
PR Close#22776
Adds a stub for `elementStyle` and `elementClass` instruction
with a canonical spec for the compiler. The spec shows the the
compiler should be using `elementStyle` and `elementClass` instruction
in place of `[class]` and `[style]` bindings respectively.
PR Close#22719
Rename:
- `elementClass` (short: `k`) => `elementClassNamed` (short: `kn`)
- `elementStyle` (short: `s`) => `elementStyleNamed` (short: `sn`)
Currently `[class.name]` is `elementClass(0, ‘name’, value)`. We would
like to introduce new binding `[class]` which needs a new instruction
ideally `elementClass(0, value)`. Doing the rename creates space
to create such an instruction in subsequent change.
PR Close#22719
This patch removes the deprecated support for animation
symbol imports from @angular/core.
BREAKING CHANGE: it is no longer possible to import
animation-related functions from @angular/core. All
animation symbols must now be imported from @angular/animations.
PR Close#22692
This commit fixes a bug that would result in views insert / remove
even if a view needed only refresh operation.
The crux of the bug was that we were looking for a view to update
only in the LContainer.nextIndex position. This is incorrect as a
view with a given block id could be present later in the views
array (this happens if we about to remove a view in the middle of
the views array).
The code in this fix searches for a view to update in the views array and
can remove views in the middle of the views collection. Previously we
would remove views at the end of the collection only.
PR Close#22656
Allow passing an optional timeout to Testability's whenStable(). If
specified, if Angular is not stable before the timeout is hit, the
done callback will be invoked with a list of pending macrotasks.
Also, allows an optional update callback, which will be invoked whenever
the set of pending macrotasks changes. If this callback returns true,
the timeout will be cancelled and the done callback will not be invoked.
If the optional parameters are not passed, whenStable() will work
as it did before, whether or not the task tracking zone spec is
available.
This change also migrates the Testability unit tests off the deprecated
AsyncTestCompleter.
PR Close#16863
The new rollup rule disables inlining symbols in debug mode. This makes
it look as if there would be more symbols but in reality these are the
symbols which are no longer being inlined.
PR Close#22747
Rename @Injectable({scope -> providedIn}).
Instead of {providedIn: APP_ROOT_SCOPE}, accept {providedIn: 'root'}.
Also, {providedIn: null} implies the injectable should not be added
to any scope.
PR Close#22655
Closure has a transformation which turns:
Service.ngInjectableDef = ...;
into:
Service$ngInjectableDef = ...;
This transformation obviously breaks Ivy in a major way. The solution is
to annotate the fields as @nocollapse. However, Typescript appears to ignore
synthetic comments added to a node during a transformation, so the "right"
way to add these comments doesn't work.
As an interim measure, a post-processing step just before the compiled JS is
written to disk appends the correct comments with a regular expression.
PR Close#22691
Previously the flag would only disable the check in the case we tried to use newer tsc version.
In g3 we sometimes take a while to update tsc, but as a prerequisite of that Angular needs to be
updated first. This change enables us to update Angular and use it in g3 while g3 is being update
to the required tsc. Of course extra care is required when this check is disabled, but since we
control everything in g3, it's on us to get this right.
I don't see any preexisting tests for this, and I'm not sure how to write them right now.
I filed https://github.com/angular/angular/issues/22699
PR Close#22669
This is not expected to be a breaking change for anyone who's on Node LTS (currently v8)
and aligns @angular/compilar-cli with @angular/cli's runtime requirements.
PR Close#22669
When the compiler generates a reference to an exported variable in the
same file, it inserts a synthetic ts.Identifier node. In CommonJS
output, this synthetic node would not be properly rewritten with an
`exports.` prefix.
This change sets the TS original node property on the synthetic node
we generate, which ensures TS knows to rewrite it in CommonJS output.
PR Close#22564
When angularCompilerOptions { enableResourceInlining: true }, we replace all templateUrl and styleUrls properties in @Component with template/styles
PR Close#22615
We now create npm packages to cover all the public api assertions in tools/public_api_guard.
We no longer depend on ts-api-guardian from npm - it is now stale since the repository was archived.
There is no longer a gulp task to enforce or accept the public API, this is in CircleCI as part of running all bazel test targets.
PR Close#22639
Produces back-patch as described in the #22235 and referenced in #22480.
This just contains the compiler implementations and the corresponding unit
tests. Connecting the dots as described in #22480 will be in a follow on
change.
PR Close#22506
BREAKING CHANGE: after this change, npm and yarn will issue incompatible peerDependencies warning
We don't expect this to actually break an application, but the application/library package.json
will need to be updated to provide tslib 1.9.0 or higher.
PR Close#22667
Support for using the `ngModel` input property and `ngModelChange`
event with reactive form directives has been deprecated in
Angular v6 and will be removed in Angular v7.
Now deprecated:
```html
<input [formControl]="control" [(ngModel)]="value">
```
```ts
this.value = 'some value';
```
This has been deprecated for a few reasons. First, developers have
found this pattern confusing. It seems like the actual `ngModel`
directive is being used, but in fact it's an input/output property
named `ngModel` on the reactive form directive that simply approximates
(some of) its behavior. Specifically, it allows getting/setting the
value and intercepting value events. However, some of `ngModel`'s other
features - like delaying updates with`ngModelOptions` or exporting the
directive - simply don't work, which has understandably caused some
confusion.
In addition, this pattern mixes template-driven and reactive forms
strategies, which we generally don't recommend because it doesn't take
advantage of the full benefits of either strategy. Setting the value in
the template violates the template-agnostic principles behind reactive
forms, whereas adding a FormControl/FormGroup layer in the class removes
the convenience of defining forms in the template.
To update your code before v7, you'll want to decide whether to stick
with reactive form directives (and get/set values using reactive forms
patterns) or switch over to template-driven directives.
After (choice 1 - use reactive forms):
```html
<input [formControl]="control">
```
```ts
this.control.setValue('some value');
```
After (choice 2 - use template-driven forms):
```html
<input [(ngModel)]="value">
```
```ts
this.value = 'some value';
```
You can also choose to silence this warning by providing a config for
`ReactiveFormsModule` at import time:
```ts
imports: [
ReactiveFormsModule.withConfig({warnOnNgModelWithFormControl: 'never'});
]
```
Alternatively, you can choose to surface a separate warning for each
instance of this pattern with a config value of `"always"`. This may
help to track down where in the code the pattern is being used as the
code is being updated.
Note: `warnOnNgModelWithFormControl` is set up as deprecated so that it
can be removed in v7 when it is no longer needed. This will not display
properly in API docs yet because dgeni doesn't yet support deprecating
properties in object literals, but we have an open issue to resolve the
discrepancy here: https://github.com/angular/angular/issues/22640.
PR Close#22633
By providing a top level sanitization methods (rather than service) the
compiler can generate calls into the methods only when needed. This makes
the methods tree shakable.
PR Close#22540
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on RFC 3986 and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* URI fragments will now serialize the same as query strings
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
Fixes: #10280
PR Close#22337
Previously the injectable compiler assumed all tree-shakeable injectables
would have dependencies that were injectables or InjectionTokens. However
old code still uses string tokens (e.g. NgUpgrade and '$injector'). Using
such tokens would cause the injectable compiler to crash.
Now, the injectable compiler can properly generate a dependency on such a
string token.
PR Close#22376
"ng update" supports having multiple packages as part of a group which should be updated together, meaning that e.g. calling "ng update @angular/core" would be equivalent to updating all packages of the group (that are part of the package.json already).
In order to support the grouping feature, the package.json of the version the user is updating to needs to include an "ng-update" key that points to this metadata.
The entire specification for the update workflow can be found here: 2e8b12a4ef/docs/specifications/update.md
PR Close#22482
inject() supports the ngInjectableDef-based configuration of the injector
(otherwise known as tree-shakeable services). It was missing from the
exported API of @angular/core, this PR adds it.
The test added here is correct in theory, but may pass accidentally due
to the decorator side-effect replacing the inject() call at runtime. An
upcoming compiler PR will strip reified decorators from the output
entirely.
Fixes#22388
PR Close#22389
Previously, when a downgraded component was destroyed in a way that did
not trigger the `$destroy` event on the element (e.g. when a parent
element was removed from the DOM by Angular, not AngularJS), the
`ComponentRef` was not destroyed and unregistered.
This commit fixes it by listening for the `$destroy` event on both the
element and the scope.
Fixes#22392
PR Close#22400
* Add correct mapping from camel case to kebab case for CSS style
names
* Remove internal CSS methods in favor of native Domino APIs
Fixes#19235
PR Close#22263
The function provided by `ngUpgrade` as `parentBoundTranscludeFn` when
upgrading a component with transclusion, will break in AngularJS v1.5.8+
if no transclusion content is provided. The reason is that AngularJS
will try to destroy the transclusion scope (which would not be needed
any more). But since the transcluded content comes from Angular, not
AngularJS, there is no transclusion scope to destroy.
This commit fixes it by providing a dummy scope object with a no-op
`$destroy()` method.
Fixes#22175
PR Close#22167
Previously, having a `=` binding on an upgraded components would result
in setting the corresponding property to an EventEmitter function. This
should only happen for `&` bindings.
This commit rstrores the correct behavior.
Note:
The issue was only present in the dynamic version of `ngUpgrade`. The
static version worked as expected.
The error did not show up in tests, because in AngularJS v1.5.x a
function would be serialized to an empty string in interpolations, thus
making them indistinguishable from uninitialized properties (in the
view). The serialization behavior changed in AngularJS v1.6.x, making
the errors visible.
PR Close#22167
`packages/upgrade/static/src` is anymlink to `packages/upgrade/src`.
Still, using the correct paths (e.g. using
`@angular/upgrade/static/src/...` for `@angula/upgrade/static` specs
ensures that the module loader (e.g. SystemJS) can map the imports to
the same instances.
PR Close#22167
The utility functions `formatNumber`, `formatPercent`, `formatCurrency`, and `formatDate` used by the number, percent, currency and date pipes are now available for developers who want to use them outside of templates.
Fixes#20536
PR Close#22423
Fixes: #10280
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on [RFC 3986](http://tools.ietf.org/html/rfc3986) and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* Query strings will now serialize with decoded slash (`/`) and question mark (`?`)
* URI fragments will now serialize the same as query strings, but hash sign (`#`) will also appear decoded
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
PR Close#22337
This produces a directory following the Angular Package layout spec.
Includes integration test coverage by making a minimal ng_package in integration/bazel.
Unit tests verify the content of the @angular/core and @angular/common packages.
This doesn't totally match our current output, but is good enough to unblock some
early adopters.
It re-uses logic from the rollup_bundle rule in rules_nodejs. It should also
eventually have the .pack and .publish secondary targets like npm_package rule.
PR Close#22221
This patch removes the need to include the Web Animations API Polyfill
(web-animations-js) as a dependency. Angular will now fallback to using
CSS Keyframes in the event that `element.animate` is no longer supported
by the browser.
In the event that an application does use `AnimationBuilder` then the
web-animations-js polyfill is required to enable programmatic,
position-based access to an animation.
Closes#17496
PR Close#22143
closes#17958
BREAKING CHANGE:
- `AbstractControl#statusChanges` now emits an event of `'PENDING'` when you call `AbstractControl#markAsPending`
- Previously it did not emit an event when you called `markAsPending`
- To migrate you would need to ensure that if you are filtering or checking events from `statusChanges` that you account for the new event when calling `markAsPending`
PR Close#20212
This patch ensures that if the NoopAnimationsModule is used then it will
correctly report the associated `totalTime` property within the emitted
AnimationEvent instance when an animation event trigger is fired.
BREAKING CHANGE: When animation is trigged within a disabled zone, the
associated event (which an instance of AnimationEvent) will no longer
report the totalTime as 0 (it will emit the actual time of the
animation). To detect if an animation event is reporting a disabled
animation then the `event.disabled` property can be used instead.
PR Close#22225
InjectionToken can be created with an ngInjectableDef, and previously
this allowed the full expressiveness of @Injectable. However, this
requires a runtime reflection system in order to generate factories
from expressed provider declarations.
Instead, this change requires scoped InjectionTokens to provide the
factory directly (likely using inject() for the arguments), bypassing
the need for a reflection system.
Fixes#22205
PR Close#22207
@Injectable() supports a scope parameter which specifies the target module.
However, it's still difficult to specify that a particular service belongs
in the root injector. A developer attempting to ensure that must either
also provide a module intended for placement in the root injector or target
a module known to already be in the root injector (e.g. BrowserModule).
Both of these strategies are cumbersome and brittle.
Instead, this commit adds a token APP_ROOT_SCOPE which provides a
straightforward way of targeting the root injector directly, without
requiring special knowledge of modules within it.
PR Close#22185
The AsyncPipe type signature was changed to allow
deferred creation of promises and observalbes that
is supported by the implementation by allowing
`Promise<T>|null|undefined` and by allowing
`Observable<T>|null|undefined`.
PR Close#22169
This commit bundles 3 important changes, with the goal of enabling tree-shaking
of services which are never injected. Ordinarily, this tree-shaking is prevented
by the existence of a hard dependency on the service by the module in which it
is declared.
Firstly, @Injectable() is modified to accept a 'scope' parameter, which points
to an @NgModule(). This reverses the dependency edge, permitting the module to
not depend on the service which it "provides".
Secondly, the runtime is modified to understand the new relationship created
above. When a module receives a request to inject a token, and cannot find that
token in its list of providers, it will then look at the token for a special
ngInjectableDef field which indicates which module the token is scoped to. If
that module happens to be in the injector, it will behave as if the token
itself was in the injector to begin with.
Thirdly, the compiler is modified to read the @Injectable() metadata and to
generate the special ngInjectableDef field as part of TS compilation, using the
PartialModules system.
Additionally, this commit adds several unit and integration tests of various
flavors to test this change.
PR Close#22005
All of the providers in a module get compiled into a module definition in the
factory file. Some of these providers are for the actual module types, as those
are available for injection in Angular. For tree-shakeable tokens, the runtime
needs to be able to distinguish which modules are present in an injector.
This change adds a NodeFlag which tags those module providers for later
identification.
PR Close#22005
Same fix as e70d7a2a7c
This is because the CompilerOptions needs to have directoryExists undefined in order to get the google3 behavior,
so we have to set the property outside the constructor.
Fixes#21872
PR Close#21876
Modifies validation syntax to generate back references to ensure
that identifiers are used consistently.
Introduced … to allow validating constant definition and usage.
PR Close#21877
Includes:
* display ToC for API docs
* update dgeni-packages to 0.24.1
* add floating sidebar in API docs
* add breadcrumbs and structured data for Google crawler
* improved rendering of method overloads
* properties rendered in a table
* params rendered with docs
* removal of outdated "infobox" from all API docs
PR Close#21874
Both Firefox and Safari are vulnerable to XSS if we use an inert document
created via `document.implementation.createHTMLDocument()`.
Now we check for those vulnerabilities and then use a DOMParser or XHR
strategy if needed.
Further the platform-server has its own library for parsing HTML, so we
sniff for that (by checking whether DOMParser exists) and fall back to
the standard strategy.
Thanks to @cure53 for the heads up on this issue.
PR Close#17019
The `ng_module` rule now has a factories attribute that
allows explicit specification of which files are expected
to generate factories. This allows avoiding generating
empty factory files (such as `.ngfactory.js`) begin
generated which might cause down-stream tools issues if
they have a limit on the number of files that can be
processed in a single bazel action.
PR Close#22003
Previously, the emitEvent flag was only checked when emitting on the current control.
Thus, if the control was part of a hierarchy, events were emitted on the parent and the childrens.
This fixes the issue by properly passing the emitEvent flag to both parent and childrens.
Fixes#12366
PR Close#21018
This is a customization of the rollup_bundle rule from rules_nodejs
which adds the build-optimizer as a plugin.
Add a functional test with fast round-trip that asserts the minified app
still works.
Publish the min.js artifact on circleCI so we can track its size.
PR Close#22004
- Fix the case when first dynamic values are NO_CHANGE
- Do not store the static texts (even indexes) as bindings,
- Do not diff static texts (they do not change),
- Do not stringify static texts,
- Remove superfluous values walking.
PR Close#21881
By adding attributes on the <ng-content> element template authors
can decide how content should be re-projected (or, in other words:
which selectors should match re-projected content).
PR Close#21935
Service Workers can be tricky to work with in production, and often
it becomes necessary to deactivate an existing SW. This is trickier
than one might imagine - as long as clients on the old SW may exist
it is important to serve some script at the old SW URL. This commit
adds safety-worker.js to the published NPM package, which is useful
for that purpose. On install the SW unregisters itself which safely
and gradually allows older clients to update.
PR Close#21863
Previously, an interceptor attempting to inject HttpClient directly
would receive a circular dependency error, as HttpClient was
constructed via a factory which injected the interceptor instances.
Users want to inject HttpClient into interceptors to make supporting
requests (ex: to retrieve an authentication token). Currently this is
only possible by injecting the Injector and using it to resolve
HttpClient at request time.
Either HttpClient or the user has to deal specially with the circular
dependency. This change moves that responsibility into HttpClient
itself. By utilizing a new class HttpInterceptingHandler which lazily
loads the set of interceptors at request time, it's possible to inject
HttpClient directly into interceptors as construction of HttpClient no
longer requires the interceptor chain to be constructed.
Fixes#18224.
PR Close#19809
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
The 2.6 version of TypeScript's `resolveModuleName` started to
require paths passed to be separated by '/' instead of being
able to handle '\'.
`ngc` and `ng` already do this transformation.
Fixes: #21811
PR Close#21812
This is a more defensive approach to ensure that references to
ParamInheritanceType from the published declarations do not cause
compilation errors when compiling Angular from the published packages.
Fixes#21456
PR Close#21773
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
Currently, `shimCssText` only keep `/*# sourceMappingUrl ... */` comments and strip `/*# sourceURL ... */` comments. So, Chrome can't find the source maps for component style(that's created in new `style` tags)
PR Close#16088
Folding errors passed calls prevented the static reflector from
begin able to ignore errors in annotations it doesn't know as
the call to the unknown annotation was elided from the metadata.
Fixes: #21273
PR Close#21708
Implement NgOnChangesFeature, ViewContainerRef, TemplateRef,
and the renderEmbeddedTemplate instruction, and wire together the
pieces required for the ngForOf directive to work.
PR Close#21430
To prepare for pending ngForOf work, the dep from instructions -> query
should be broken. This will enable a dep from di -> instructions while
avoiding a di -> instructions -> query -> di cycle.
Analyzing this cycle also uncovered another problem: the implementation
of query() breaks tree-shaking through a hard dependency on DI concepts
of TemplateRef, ElementRef, ViewContainerRef. This is fundamentally due
to how query() can query for those values without any configuration.
Instead, this fix introduces the concept by employing the strategy
pattern, and redefining QueryReadType to pass a function which will
return one of the above values. This strategy is then used for 'read'
instead of an enum in cases where special values should be read from
the DI system.
PR Close#21430
assertLessThan() actually does the opposite of what it advertises.
It's only through luck that existing asserts have not failed
before. This changes assertLessThan to actually assert that the
value is less than something.
PR Close#21430
The "enableIvy" compiler option is the initial implementation
of the Render3 (or Ivy) code generation. This commit enables
generation generating "Hello, World" (example in the test)
but not much else. It is currenly only useful for internal Ivy
testing as Ivy is in development.
PR Close#21427
Adding the binding name to the error message recieved by the user gives
extra context on what exactly changed. The tests are also updated to
reflect the new error message.
PR Close#20352
- Improve `WrappedValue` by adding `unwrap` symetrical to `wrap`.
- remove dead code - `ValueUnwrapper`
The property `wrapped` is an implementation details and should never be accessed
directly - use `unwrap(wrappedValue)`. Will change to protected in Angular 7.
PR Close#20997
This commit fixes a bug whereby the caches are not cleared when the
program changes. This subsequently produces the incorrect error of
'Component ... is not included in a module ...'.
PR Close#19405
PR Close#21337
This change makes the code cleaner for the user. It does mean
a little bit more work for us since we have to patch the `type` back
into the `DirectiveDef`. However since the patching happens only once
on startup it should not be significant.
PR Close#21374
This separation is no longer needed since directives are now passed into the `container` as an array rather than as child functions of the `containerStart`
PR Close#21374
This change creates a spec file which contains canonical examples
of how the template compiler will translate templates into expected
output.
PR Close#21374
We used to have a separate `directive` instruction for instantiating
directives. However, such an instruction requires that directives
are created in the correct order, which would require that template
compiler would have knowledge of all dependent directives. This
would break template compilation locality principle.
This change only changes the APIs to expected form but does
not change the semantics. The semantics will need to be corrected
in subsequent commits. The semantic change needed is to
resolve the directive instantiation error at runtime based on
injection dependencies.
PR Close#21374
Cache reference resolution for external references as finding
the declaration of a symbol is expensive and does not change
for a program once created.
This resolves a signficant performance regression in the langauge
service.
PR Close#21359
This helps ensure we use the same tsconfig.json file for all compilations.
Next steps are to make it the same tsconfig.json file used by the editor
PR Close#20964
When the SW fetches URLs listed in a manifest with hashes, it checks
the content hash against the manifest to make sure it has the correct
version of the URL. In the event of a mismatch, the SW is supposed to
consider the manifest invalid, and avoid using it. There are 3 cases
to consider by which this can happen.
Case 1: during the initial SW installation, a manifest is activated
without waiting for every URL to be fully loaded. In the background,
every prefetch URL listed by the manifest is requested and cached.
One such prefetch request could fail the hash test, and cause the
manifest to be treated as invalid. In such a case, the SW should
enter a state of EXISTING_CLIENTS_ONLY, as the latest manifest is
invalid.
This case works today.
Case 2: during the initial SW installation, as in Case 1, a manifest
is activated without waiting for each URL to fully load. However,
it's possible that the application could request a URL with a bad
hash before background initialization tries to load that URL. This
happens if, for example, the application has a broken index.html.
In this case, the SW should enter a state of EXISTING_CLIENTS_ONLY,
and serve the request from the network instead.
What happens today is that the internal error escapes the SW and
is returned as a rejected Promise to respondWith(), causing a
browser-level error that the site cannot be loaded, breaking the
site.
This change allows the SW to detect the error and enter the correct
state, falling back on the network if needed.
Case 3: during checkForUpdate(), the SW will try to fully cache the
new update before making it the latest version. Failure here is
complicated - if the page fails to load due to transient network
conditions (timeouts, 500s, etc), then it makes sense to continue
serving the existing cached version, and attempt to activate the
update on the next cycle.
If the page fails due to non-transient conditions though (400 error,
hash mismatch, etc), then the SW should consider the updated
manifest invalid, and enter a state of EXISTING_CLIENTS_ONLY.
Currently, all errors are treated as transient.
This change causes the SW to treat all errors during updates as
non-transient, which can cause the SW to unnecessarily enter a
safe mode. A future change can allow the SW to remain in normal mode
if the error is provably transient.
PR Close#21288
Chrome 63 can cause the navigationStart event for the first
run to arrive with a different pid than the start of the
benchpress run. This makes the first collected result invalid.
This workaround causes the sampler to ignore runs that have this
condition.
PR Close#21396
Bazel runs on newer version of RxJs than is installed in Yarn. The never version subclasses `EmptyError` in a different way which fails the `instanceof` check. This change makes the `instanceof` check more robust with respect to `EmptyError`.
PR Close#21053
- Add tests target for `test`, `test_node_only` and `test_web` in `core` package.
- Created a `_testing_init` pseudo package where bootstrap code for tests is kept.
- Moved `source_map_util` from `test` to `testing` so to prevent circular dependency.
- Removed `visibility:public` for testing `BUILD` packages.
PR Close#21053
`main()` function used to be needed to support dart, since dart
Does not allow top level statements. Since we no longer use dart
The need for `main()` has been removed.
In preparation for `Basel` and standardized way of running tests
we are removing `main()`
PR Close#21053
This patch fixes animations so that if multiple sub @triggers are used
and are blocked by a parent animation then the engine will not lead
itself into an infinite loop.
PR Close#21119
This PR fixes a circular dependency among those files in Renderer3:
`query` -> `di` -> `instructions` -> `query` -> ...
Looking at the above dependencies the `di` -> `instructions` import is
a problematic one. Previously `di` had an import from `instructions`
since we can known about "current node" only in `instructions`
(and we need "current node" to create node injector instances).
This commit refactors the code in the way that functions in the
`di` file don't depend on any info stored module-global variables
in `instructions`.
PR Close#20855
Closure Compiler renames all properties that are "internal" to the
program. `DOMAnimation` however is external, it is a browser API, so its
fields must not be renamed.
This change marks `DOMAnimation` as external using `declare interface`,
which will cause Closure Compiler to back off and prevent renaming of
any of its fields.
PR Close#21125
Previously, the router would merge path and matrix params, as well as
data/resolve, with special rules (only merging down when the route has
an empty path, or is component-less). This change adds an extra option
"paramsInheritanceStrategy" which, when set to 'always', makes child
routes unconditionally inherit params from parent routes.
Closes#20572.
The compiler host would force any file that is in node_modules
into the list of files that needed to be type checked which
captures .js files if `allowJs` is set to `true`. This should
have only forced .d.ts files into the project to enable
generation of factories.
Fixes: #19757
This allows examples to be found during aio's `yarn serve-and-sync`, which only
looks for examples in `packages/examples/<packageName>/**/*`, where
`packageName` is the name of the package that the modified file belonged to;
e.g. `core`, `common`, etc.).
Allows a directive to use the expression passed directly to a property
as a guard instead of filtering the type through a type expression.
This more accurately matches the intent of the ngIf usage of its template
enabling better type inference.
Moved NgIf to using this type of guard instead of a function guard.
Closes: #20967
Currently the Service Worker checks for updates only on SW startup,
an event which happens frequently but also nondeterministically. This
makes it hard for developers to observe the update process or reason
about how updates will be delivered to users. This problem is
exacerbated by the DevTools behavior of keeping the SW alive
indefinitely while opened, effectively preventing the page from
updating at all.
This change causes the SW to additionally check for updates on
navigation requests (app page reloads). This creates deterministic
update behavior, and is much easier for developers to reason about.
It does leave the old update-on-SW-startup behavior in place, as
removing that would be a breaking change.
Fixes#20877
Closure Compiler cannot infer that the swtich statement is exhaustive,
which causes it to complain that the method does not always return a
value.
Work around the problem by throwing an exception in the default case,
and using the `: never` type to ensure the code is unreachable.
Due to an overly agressive assert the compiler would generate
an internal error when referencing an enum declared in
namspace.
Fixes#18170
PR Close#20947
Previously, this code would unconditionally add a @fileoverview
comment to generated files, and only if the contained any code at all.
However often existing fileoverview comments should be copied from the
file the generated file was originally based off of. This allows users
to e.g. include Closure Compiler directives in their original
`component.ts` file, which will then automaticallly also apply to code
generated from it.
This special cases `@license` comments, as Closure disregards directives
in comments containing `@license`.
PR Close#20870
Since our version of Chromium is also pinned, a new ChromeDriver (that
drops support for our Chromium version) can cause random (and unrelated
to the corresponding changes) errors on CI.
This commit pins the version of ChromeDriver and it should now be
manually upgraded to a vrsion that is compatible with th currently used
Chromium version.
PR Close#20940
`$any()` can now be used in a binding expression to disable type
checking for the rest of the expression. This similar to `as any` in
TypeScript and allows expression that work at runtime but do not
type-check.
PR Close#20876
Structural directives can now specify a type guard that describes
what types can be inferred for an input expression inside the
directive's template.
NgIf was modified to declare an input guard on ngIf.
After this change, `fullTemplateTypeCheck` will infer that
usage of `ngIf` expression inside it's template is truthy.
For example, if a component has a property `person?: Person`
and a template of `<div *ngIf="person"> {{person.name}} </div>`
the compiler will no longer report that `person` might be null or
undefined.
The template compiler will generate code similar to,
```
if (NgIf.ngIfTypeGuard(instance.person)) {
instance.person.name
}
```
to validate the template's use of the interpolation expression.
Calling the type guard in this fashion allows TypeScript to infer
that `person` is non-null.
Fixes: #19756?
PR Close#20702
For some reason, prior to this fix, the boolean set matching
code (within `animation_transition_expr.ts`) failed to remain
the same when compiled with closure. This refactor makes sure
that the code stays in tact.
Reproduction Details:
Passes without `ng build --prod`: https://burger.stackblitz.io/
Fails with `ng build --prod`: http://burger.fxck.cz/Closes#20374
PR Close#20725
Closure Compiler by default will report diagnostics from type checks in
any JavaScript code, including code emitted by the Angular compiler.
Disabling `checkTypes` substantially reduces warning spam for users, and
allows them to run with stricter compiler flags (e.g. treating actual
diagnostics from user code as errors).
Closure Compiler will still type check the code and use types (where
found and correct) for optimizations.
PR Close#20828
Add enough BUILD files to make it possible to
`bazel build packages/core/test`
Also re-format BUILD.bazel files with Buildifier.
Add a CI lint check that they stay formatted.
PR Close#20768
The package.json esm2015 points to the wrong path.
"esm15" should be "esm2015"
Service Worker can't be compiled with use of Closure Compiler
PR Close#20800
Not every application is served from the domain root. The Service
Worker made a bad assumption that it would be, and so requested
/ngsw.json from the domain root.
This change corrects this assumption, and requests ngsw.json without
the leading slash. This causes the request to be interpreted
relative to the SW origin, which will be the application root.
The Service Worker contains a mechanism by which it will postMessage
itself a signal to initialize its caches. Through this mechanism,
initialization happens asynchronously while keeping the SW process
alive.
Unfortunately in Firefox, the SW does not have the ability to
postMessage itself during the activation event. This prevents the
above mechanism from working, and the SW initializes on the next
fetch event, which is often too late.
Therefore, this change has the application wait for SW changes and
tells each new SW to initialize itself. This happens in addition to
the self-signal that the SW attempts to send (as self-signaling is
more reliable). That way even on browsers such as Firefox,
initialization happens eagerly.
Currently a bug exists where attempting to inject SwPush crashes the
application if Service Workers are unsupported. This happens because
SwPush doesn't properly detect that navigator.serviceWorker isn't
set.
This change ensures that all passive observation of SwPush and
SwUpdate doesn't cause crashes, and that calling methods to perform
actions on them results in rejected Promises. It's up to applications
to detect when those services are not available, and refrain from
attempting to use them.
To that end, this change also adds an `isSupported` getter to both
services, so users don't have to rely on feature detection directly
with browser APIs. Currently this simply detects whether the SW API
is present, but in the future it will be expanded to detect whether
a particular browser supports specific APIs (such as push
notifications, for example).
Currently, the way to not use the SW is to not install its module.
However, this means that you can't inject any of its services.
This change adds a ServiceWorkerModule.disabled() MWP, that still
registers all of the right providers but acts as if the browser does
not support Service Workers.
Saving `oldProgram` in `AngularCompilerProgram` instances is causing a memory leak for unemitted programs.
It's not actually used so simply not saving it fixes the memory leak.
Fix#20691
PR Close#20692
This changes XhrBackend to not strip the XSSI prefix from error text
if such a prefix is present but the remaining body does not parse as
JSON.
PR Close#19958
Previously, XhrBackend would call JSON.parse('') if the response body was
empty (a 200 status code with content-length 0). This changes the XhrBackend
to attempt the JSON parse only if the response body is non-empty. Otherwise,
the body is left as null.
Fixes#18680.
Fixes#19413.
Fixes#19502.
Fixes#19555.
PR Close#19958
Previously, HttpClient used the overly clever test "body || null"
to determine when a body parameter was provided. This breaks when
the valid bodies '0' or 'false' are provided.
This change tests directly against 'undefined' to detect the presence
of the body parameter, and thus correctly allows falsy values through.
Fixes#19825.
Fixes#19195.
PR Close#19958
The errors produced when error were encountered while interpreting the
content of a directive was often incomprehencible. With this change
these kind of error messages should be easier to understand and diagnose.
PR Close#20459
The type-check block generated with `"fullTemplateTypeCheck"` was
invalid if the it contained a template ref as would be generated
using the `else` micro-syntax of `NgIf`.
Fixes: #19485
PR Close#20463
- update to TypeScript 2.5
- point the 2.4 typings test at the previous typescript version, so we
don't break it accidentally
- widen the peerDeps from Angular packages that depend on TypeScript
- update to latest TypeScript 2.5 compatible Bazel rules
- move .bazelrc to tools/bazel.rc per https://docs.bazel.build/versions/master/best-practices.html#bazelrc
PR Close#20175
Throwing an exception in a lifecycle event will delay but not
prevent an Init method, such as `ngOnInit`, `ngAfterContentInit`,
or `ngAfterViewInit`, from being called. Also, calling `detectChanges()`
in a way that causes duplicate change detection (such as a
child component causing a parent to call `detectChanges()` on its
own `ChangeDetectorRef`, will no longer prevent change `ngOnInit`,
`ngAfterContentInit` and `ngAfterViewInit` from being called.
With this change lifecycle methods are still not guarenteed to be
called but the Init methods will be called if at least one change
detection pass on its view is completed.
Fixes: #17035
PR Close#20258
This commit fixes the options passed to ReflectorHost to include 'paths'
if it's specified in compiler options, so that dependency modules can
be loaded.
PR Close#20222
`cmp:host {}` and `cmp:host some-other-selector {}` were not handled
consistently.
Note those should not match anything but are made equivalent to respectively
`:host(cmp)` and `:host(cmp) some-other-selector` to avoid breaking legacy apps.
This allows to overwrite templates for JIT and AOT components alike.
In contrast to `TestBed.overrideTemplate`, the template is compiled
in the context of the testing module, allowing to use other testing
directives.
Closes#19815
This PR was merged without API docs and general rollout plan.
We can't release this as is in 5.1 without a plan for documentation, cli integration, etc.
It's illegal to coerce a Symbol to a string, and results in a TypeError:
TypeError: Cannot convert a Symbol value to a string
Previously, the custom jasmineToString() method monkey-patched onto Maps
in platform-browser/testing/src/matchers.ts would coerce keys and values
to strings. A change in a newer version of Jasmine calls this method more
often, resulting in calls against Maps which contain Symbols in some
applications, which causes crashes.
The fix is to explicitly convert keys and values to strings, which does
work on Symbols.
Condition: static analysis error, given:
- noResolve:true
- generateCodeForLibraries: false
- CompilerHost.getSourceFile throws on non existent files
All of these are true in G3.
PR Close#20041
* don't reexport symbols that the user already reexported
* never reexport symbols that are part of arguments of non simple function calls
Fixes#19883
PR Close#19884
This adds the proper bindings for calling angular packages from platform-server in the UMD.
This was not a problem for universal apps that dont use UMD.
Fixes 19899
This also changes the compiler so that we throw less often
on structural changes and produce a meaningful state
in the `ng.Program` in case of errors.
Related to #19951
PR Close#19953
Previously, `listLazyRoute` would store invalid information in a compiler
internal cache, which lead to incorrect paths that were used during emit.
This commit fixes this.
PR Close#19953
Observable.merge was called using .call() as if it were an operator
and not an Observable factory. This removes the .call() and uses
the factory properly.
PR Close#19962
Importing ServiceWorkerModule.register() will schedule registration of
the Service Worker inside an APP_INITIALIZER. Previously, the Promise
returned by navigator.serviceWorker.register() was returned from the
initializer function. This has the unwanted side effect of blocking
initialization until the SW is registered. Even worse, if the SW script
fails to load, this can cause the app initialization to fail.
The solution is to not return the registration promise from the
initializer function, essentially decoupling registration from the rest
of the initialization flow.
This change is not unit testable as there are no mocks/adapters yet for
navigator.serviceWorker. A future integration test should cover this case
with better fidelity.
PR Close#19936
Currently, the SwUpdate service doesn't receive messages from the SW.
This is because it attempts to subscribe to the 'message' event on
ServiceWorkerRegistration, when really messages are emitted by the
ServiceWorkerContainer.
This change moves to listening on ServiceWorkerContainer and changes
the mocks to reflect the way the browser actually works.
PR Close#19954
The path mapping was broken for Windows by fc0b1d5b61.
Fixed the path mapping and put code in place to make such a problem
to sneek by again.
PR Close#19915
The error collector changes behavior of the metadata resolver
in ways that haven't been fully hardened. This changes limits
its use to the lazy route detection and the language service.
Issue: #19906
PR Close#19912
This change is needed to prevent users’ builds from breaking.
If a user sets `fullTemlateTypeCheck` to true, we will
continue to check the templates even when `skipTemplateCodegen` is true
as well.
Related to #19906
PR Close#19909
This fixes a problem introduced in 8d45fefc31
which modified how diagnostic error messages are reported for structural
metadata errors causing some of the diagnostics to be lost.
PR Close#19886
Usages of `NgTools_InternalApi_NG_2` from `@angular/compiler-cli` will now
throw an error.
Adds `listLazyRoutes` to `@angular/compiler-cli/ngtools2.ts` for getting
the lazy routes of a `ng.Program`.
PR Close#19836
There is no difference in runtime (yet) between versioned and unversioned
files. Theoretically, the SW does not have to cache-bust versioned files,
but the SW doesn't cache bust files on the first request anyway, so in the
common case it doesn't matter. If the hash doesn't match, the SW will cache
bust the file to be sure, which is technically unnecessary, but since the
file itself is versioned, the likelihood of this happening is rare.
This fixes a critical bug where versioned files were erroneously not included
in the hashTable in the generated manifest. This could lead to applications
not updating if only versioned files changed in between versions.
PR Close#19837
As this is the only version range that we tested against in G3.
We will support newer versions of TypeScript soon
after the Angular 5 release.
Closes#19750
PR Close#19787
References to resources (such as .css files) that are generated into
the `outDir` directory outside of `rootDir` would cause a spurious
compiler error about not being able to find a files that ends in
'.ngstyle.ts'.
Also fixed a minor issue in compiler error reporting
Fixes: #19765, #19767
PR Close#19770
PushEvent.data is not the data object itself, but an instance representing
the data in wire format, with methods to synchronously decode it to JSON,
ArrayBuffer, etc. NGSW assumes all push data is in JSON format.
PR Close#19764
When Cache.put() is called with a Response, it consumes the response. If
the Response is used for any other purpose (such as satisfying the
original FetchEvent) it must be cloned first.
A bug exists in the mocks used for SW tests, where this condition is not
validated. The bodies of MockResponses can be utilized repeatedly without
erroring in the same way that a real browser would. This bug is fixed by
this commit, which causes tests for the freshness strategy of data caching
to start failing.
The cause of this failure is a second bug in the data caching code, where
the Response is not cloned prior to being passed to Cache.put(). This is
also fixed.
PR Close#19764
If no user files changed:
- only type check the changed generated files
Never emit non changed generated files
- we still calculate them, but don’t send them through
TypeScript to emit them but cache the written files instead.
PR Close#19646
Before, as soon as a user called `TestBed.overrideProvider` for a provider
of a `NgModule` that was imported via `TestBed.configureTestingModule`,
that `NgModule` became lazy.
This commit changes this behavior to keep the `NgModule` eager,
with or without a call to `TestBed.overrideProvider`.
PR Close#19624
This allows use to fix `TestBed.overrideProvider` to keep imported `NgModule`s eager,
while allowing our users to still keep the old semantics until they have fixed their
tests.
PR Close#19558
This CL refactors the animation AST code to make use of interfaces instead of classes. Given that interfaces are not persisted during runtime the removal of classes should nicely cut down on size for the animations-browser bundle.
-- before --
animations-browser.umd.js = 222kb
animations-browser.umd.min.js = 107kb
-- after --
animations-browser.umd.js = 213kb
animations-browser.umd.min.js = 102kb
PR Close#19539
This CL refactors the animation AST code to make use of interfaces instead of classes. Given that interfaces are not persisted during runtime the removal of classes should nicely cut down on size for the animations-browser bundle.
-- before --
animations-browser.umd.js = 222kb
animations-browser.umd.min.js = 107kb
-- after --
animations-browser.umd.js = 213kb
animations-browser.umd.min.js = 102kb
PR Close#19539
Assocating each template node with a the generated TypeScript
generated overly verbose source maps. Changed to creating a
source map entry per unique source span instead of each
unique template ast node.
Fixes: #19537
PR Close#19578
This helps hazel as it does not check libraries (e.g. the default lib) which are
not input files, but still checks `.d.ts` files that are inputs.
PR Close#19581
This commit fixes several issues discovered through use in real apps.
* The sha1() function operated on text content, causing issues for binary-format files.
A sha1Binary() function which operates on unparsed data now avoids any encoding issues.
* The characters '?' and '+' were not escaped in Glob-to-regex conversion previously, but
are now.
* URLs from the browser contain the full origin, but were checked against the table of
hashes from the manifest which only has the path for URLs from the same origin. Now the
origin is checked and URLs are relativized to the domain root before comparison if
appropriate.
* ngsw: prefix was missing from data groups, is now added.
* Occasionally servers will return a redirected response for an asset, and caching it could
cause errors for navigation requests. The SW now handles this by detecting such responses
and following the redirect manually, to avoid caching a redirected response.
* The request for known assets is now created from scratch from the URL before fetching from
the network, in order to sanitize it and avoid carrying any special modes or headers that
might result in opaque responses.
* Debugging log for troubleshooting.
* Avoid creating errors by returning 504 responses on error.
* Fix bug where idle queue doesn't run in some circumstances.
* Add tests for the above.
This is important to not confuse users nor downstream tools that
consume our source maps. For generated content for which we don’t
have an original source file, we use the generated file now.
Fixes#19538
The current `flattenSummaries` function re-process the same NgModule
summary even if it has been processed before. Certain modules like
CommonModule are repeated multiple times in the module tree and it is
expanded out every time.
This was making unit tests using AOT summaries really slow. This will
also slow down JIT bootstrap applications that load AOT summaries for
component libraries.
The fix is to remember which summaries were seen before and not to
process them again.
Each node now has two index: nodeIndex and checkIndex.
nodeIndex is the index in both the view definition and the view data.
checkIndex is the index in in the update function (update directives and update
renderer).
While nodeIndex and checkIndex have the same value for now, having both of them
will allow changing the structure of view definition after compilation (ie for
runtime translations).
For now, we always create all generated files, but diff them
before we pass them to TypeScript.
For the user files, we compare the programs and only emit changed
TypeScript files.
This also adds more diagnostic messages if the `—diagnostics` flag
is passed to the command line.
This service worker is a conceptual derivative of the existing @angular/service-worker maintained at github.com/angular/mobile-toolkit, but has been rewritten to support use across a much wider variety of applications.
Entrypoints include:
@angular/service-worker: a library for use within Angular client apps to communicate with the service worker.
@angular/service-worker/gen: a library for generating ngsw.json files from glob-based SW config files.
@angular/service-worker/ngsw-worker.js: the bundled service worker script itself.
@angular/service-worker/ngsw-cli.js: a CLI tool for generating ngsw.json files from glob-based SW config files.
Closure no longer needs to have the imports rewritten avoid rewriting
as this can cause issues when the source directory structure differs
from what is deployed.
Fixes: #19026
This is needed as:
- closure declares globals itself for minified names, which sometimes clobber our `ng` global
- we can't declare a closure extern as the namespace `ng` is already used within Google for typings for angularJS (via `goog.provide('ng....')`).
This is necessary to enable type-based optimizations with Closure.
Without explicity making these options the same named type, Closure
thinks they are different types and cannot disambiguate the `fromObject`
property.
Added the compiler options `strictInjectionParameters` that defaults
to `false`. If enabled the compiler will report errors for parameters
of an `@Injectable` that cannot be determined instead of generating a
warning.
This is planned to be switched to default to `true` for Angular 6.0.
Also adds auto upgrade from lower version based
on the .d.ts file (e.g. from version 3 to 4).
This is needed as we are now also capturing type aliases
in metadata files (and we rely on this),
see 6e3498ca8e.
The new expression lowering lowers everything after `useValue` / `useFactory`
into a separate exported variable. If the value was a `forwardRef`, this
was passed to the runtime and resulted in errors.
This change unwraps `forwardRef`s during runtime again.
Note: we can’t unwrap the `forwardRef` into an exported variable
during compile time, as this would defeat the purpose of the
`forwardRef` in referring to something that can’t be referred to
at this position.
introduce the option `allowEmptyCodegenFiles` to generate all generated files,
even if they are empty.
- also provides the original source files from which the file was generated
in the write file callback
- needed e.g. for G3 when copying over pinto mod names from the original component
to all generated files
use `importAs` from flat modules when writing summaries
- i.e. prevents incorrect entries like @angular/common/common in the .ngsummary.json files.
change interaction between ng and ts to prevent race conditions
- before Angular would rely on TS to first read the file for which we generate files,
and then the generated files. However, this can break easily when we reuse an old program.
don’t generate files for sources that are outside of `rootDir`
(see #19337)
TransferState provides a shared store that is transferred from the
server to client. To use it import BrowserTransferStateModule from the
client app module and ServerTransferStateModule from the server app
module and TransferState will be available as an Injectable object.
PR Close#19134
With this commit `ngc` is used instead of `tsc-wrapped` for
collecting metadata and tsickle rewriting and `tsc-wrapped`
is removed from the repository.
`@angular/tsc-wrapped@5` is now deprecated and is no longer
used, updated, or maintained as part as of Angular 5.x.x.
`@angular/tsc-wrapped@4` is still maintained and required by
Angular 4.x.x and will be maintained as long as 4.x.x is in
LTS.
PR Close#19298
- optimize the way node flags are propagated in `viewDef()`,
- fix `elementDef()` signature to make `namespaceAndName` nullable,
- move render parent computation with the parent computation
PR Close#19272
It doesn't make any difference in this case, because the we only check the
property for truthfulness (and being undefined has the same effect as being set
to false).
PR Close#19180
- don’t regenerate code for .d.ts files when
an oldProgram is passed to `createProgram`
- cache `fileExists` / `getSourceFile` / `readFile` in watch mode
- refactor tests to share common code in `test_support`
- support `—diagnostic` command line to print total time
used per watch mode compilation.
PR Close#19275
This flag controls whether the compiler emits generated files.
It is initially calculated via `skipTemplateCodegen` from the
compiler options.
Also:
- adds a small performance improvement to not generate the files
at all if we don’t emit generated code.
- removes `EmitFlags.Summaries` as we never used it.
PR Close#19275
We now create 2 programs with exactly the same fileNames and
exactly the same `import` / `export` declarations,
allowing TS to reuse the structure of first program
completely. When passing in an oldProgram and the files didn’t change,
TS can also reuse the old program completely.
This is possible buy adding generated files to TS
in `host.geSourceFile` via `ts.SourceFile.referencedFiles`.
This commit also:
- has a minor side effect on how we generate shared stylesheets:
- previously every import in a stylesheet would generate a new
`.ngstyles.ts` file.
- now, we only generate 1 `.ngstyles.ts` file per entry in `@Component.styleUrls`.
This was required as we need to be able to determine the program files
without loading the resources (which can be async).
- makes all angular related methods in `CompilerHost`
optional, allowing to just use a regular `ts.CompilerHost` as `CompilerHost`.
- simplifies the logic around `Compiler.analyzeNgModules` by introducing `NgAnalyzedFile`.
Perf impact: 1.5s improvement in compiling angular io
PR Close#19275
The private classes `ApplicationRef_`, `PlatformRef_`, `JSONPConnection_`, `JSONPBackend_`, `ClientMessageBrokerFactory_`, `ServiceMessageBroker_`, `ClientMessageBroker_` and `ServiceMessageBrokerFactory_` have been removed and merged into their public equivalents.
The size of the minified umd bundles have been slightly decreased:
| package | before | after |
| -------------------|------------|------------|
| core | 217.791 kb | 217.144 kb |
| http | 33.260 kb | 32.838 kb |
| platform-webworker | 56.015 kb | 54.933 kb |
PR Close#19143
This speeds up the compilation process significantly.
Also introduces a new option `fullTemplateTypeCheck` to do more checks in templates:
- check expressions inside of templatized content (e.g. inside of `<div *ngIf>`).
- check the arguments of calls to the `transform` function of pipes
- check references to directives that were exposed as variables via `exportAs`
PR Close#19152
- temporarily keeps the old sources under packages/tsc-wrapped
until the build scripts are changed to use compiler-cli everywhere.
- removes the compiler options `disableTransformerPipeline` that was introduced
in a previous beta of Angular 5, i.e. the transformer based compiler
is now always enabled.
PR Close#18966
Add testability hook to downgraded component so that protractor can wait for asynchronous call to complete.
Add unregisterApplication() and unregisterAllApplications() to testability registry for cleaning up testability and unit test.
Domino doesn't support innerText. So the actual inner text wasn't
getting set if the [innerText] was set on an element in a template. Add
it to the domino adapter to map it to textContent.
Also change wrongly named initParse5Adapter to initDominoAdapter.
A multi RENDER_MODULE_HOOK provider can provide function that will be called with the current document just before the document is rendered to
string.
This hook can for example be used for the state transfer module to serialize any server state that needs to be transported to the client, just before the current platform state is rendered to string.
PR Close#19023
* The problem was with the `fireChildActivationStart` function. It was taking a `path` param, which was an
array of `ActivatedRouteSnapshot`s. The function was being fired for each piece of the route that was being
activated. This resulted in far too many `ChildActivationStart` events being fired, and being fired on routes
that weren't actually getting activated. This change fires the event only for those routes that are actually
being activated.
fixes#18942
PR Close#19043
* Introduced with #18407, `RouteEvents` don't actually have a common constructor. Reverting here to be able to add new functionality to ChildActivation events.
PR Close#19043
BREAKING CHANGE: the compiler option `enableLegacyTemplate` is now disabled by default as the `<template>` element has been deprecated since v4. Use `<ng-template>` instead. The option `enableLegacyTemplate` and the `<template>` element will both be removed in Angular v6.
PR Close#18756
* Remove now unnecessary portions of build.
* Add a compilePackageES5 method to build ES5 from sources
* Rework all package.json and rollup config files to new format
* Remove "extends" from tsconfig-build.json files and fixup compilation roots
PR Close#18541
This is a corner case, and converting them is what
was expected in G3. This also fits the fact that
we already convert package paths into relative paths.
PR Close#18912
With this change ngc now accepts a `-w` or a `--watch`
command-line option that will automatically perform a
recompile whenever any source files change on disk.
PR Close#18818
With this commit the compiler will "lower" expressions into exported
variables for values the compiler does not need to know statically
in order to be able to generate a factory. For example:
```
providers: [{provider: 'token', useValue: calculated()}]
```
produced an error as the expression `calculated()` is not supported
by the compiler because `calculated` is not a
[known function](https://angular.io/guide/metadata#annotationsdecorators)
With this commit this is rewritten, during emit of the .js file, into
something like:
```
export var ɵ0 = calculated();
...
provdiers: [{provider: 'token', useValue: ɵ0}]
```
The compiler then will now generate a reference to the exported `ɵ0`
instead of failing to evaluate `calculated()`.
PR Close#18905
With this change ngc now accepts a `-w` or a `--watch`
command-line option that will automatically perform a
recompile whenever any source files change on disk.
PR Close#18818
With this commit the compiler will "lower" expressions into exported
variables for values the compiler does not need to know statically
in order to be able to generate a factory. For example:
```
providers: [{provider: 'token', useValue: calculated()}]
```
produced an error as the expression `calculated()` is not supported
by the compiler because `calculated` is not a
[known function](https://angular.io/guide/metadata#annotationsdecorators)
With this commit this is rewritten, during emit of the .js file, into
something like:
```
export var ɵ0 = calculated();
...
provdiers: [{provider: 'token', useValue: ɵ0}]
```
The compiler then will now generate a reference to the exported `ɵ0`
instead of failing to evaluate `calculated()`.
PR Close#18905
Fixes#14638
Uses Domino - https://github.com/fgnass/domino and removes dependency on
Parse5.
The DOCUMENT and nativeElement were never typed earlier and were
different on the browser(DOM nodes) and the server(Parse5 nodes). With
this change, platform-server also exposes a DOCUMENT and nativeElement
that is closer to the client. If you were relying on nativeElement on
the server, you would have to change your code to use the DOM API now
instead of Parse5 AST API.
Removes the need to add services for each and every Document
manipulation like Title/Meta etc.
This does *not* provide a global variable 'document' or 'window' on the
server. You still have to inject DOCUMENT to get the document backing
the current platform server instance.
Currently HttpClient sends requests for JSON data with the
XMLHttpRequest.responseType set to 'json'. With this flag, the browser
will attempt to parse the response as JSON, but will return 'null' on
any errors. If the JSON response contains an XSSI-prevention prefix,
this will cause the browser's parsing to fail, which is unrecoverable.
The only compelling reason to use the responseType 'json' is for
performance (especially if the browser offloads JSON parsing to a
separate thread). I'm not aware of any browser which does this currently,
nor of any plans to do so. JSON.parse and responseType 'json' both
end up using the same V8 code path in Chrome to implement the parse.
Thus, this change switches all JSON parsing in HttpClient to use
JSON.parse directly.
Fixes#18396, #18453.
PR Close#18466
Today, constructing a new GET request with headers looks like:
const headers = new HttpHeaders({
'My-Header': 'header value',
});
http.get('/url', {headers}).subscribe(...);
This indirection is unnecessary. It'd be more ergonomic to write:
http.get('/url', {headers: {'My-Header': 'header value'}}).subscribe(...);
This commit allows that new syntax, both for HttpHeaders and HttpParams.
In the HttpParams case it also allows construction of HttpParams with a map.
PR Close#18490
This is needed as the typescript no longer elides type reexports
in the generated code when using transformers.
A nice side effect is that this make summaries shorter and produces
less reexports as we rollup reexports.
PR Close#18788
Previously, we only did this when setting the `generateCodeForLibraries: false`.
This is needed so that libraries compiled with `generateCodeForLibraries: true` can be used as dependencies of other compilation units.
PR Close#18788
BREAKING CHANGE: `RouterOutlet` properties `locationInjector` and `locationFactoryResolver` have been removed as they were deprecated since v4.
PR Close#18781
BREAKING CHANGE: the values `true`, `false`, `legacy_enabled` and `legacy_disabled` for the router parameter `initialNavigation` have been removed as they were deprecated. Use `enabled` or `disabled` instead.
PR Close#18781
CompilerConfig should be the only source of default settings for preserveWhitespaces
so let's not enforce defaults on the CompilerOptions level.
PR Close#18772
BREAKING CHANGE: Because of multiple bugs and browser inconsistencies, we have dropped the intl api in favor of data exported from the Unicode Common Locale Data Repository (CLDR).
Unfortunately we had to change the i18n pipes (date, number, currency, percent) and there are some breaking changes.
1. I18n pipes
* Breaking change:
- By default Angular now only contains locale data for the language `en-US`, if you set the value of `LOCALE_ID` to another locale, you will have to import new locale data for this language because we don't use the intl API anymore.
* Features:
- you don't need to use the intl polyfill for Angular anymore.
- all i18n pipes now have an additional last parameter `locale` which allows you to use a specific locale instead of the one defined in the token `LOCALE_ID` (whose value is `en-US` by default).
- the new locale data extracted from CLDR are now available to developers as well and can be used through an API (which should be especially useful for library authors).
- you can still use the old pipes for now, but their names have been changed and they are no longer included in the `CommonModule`. To use them, you will have to import the `DeprecatedI18NPipesModule` after the `CommonModule` (the order is important):
```ts
import { NgModule } from '@angular/core';
import { CommonModule, DeprecatedI18NPipesModule } from '@angular/common';
@NgModule({
imports: [
CommonModule,
// import deprecated module after
DeprecatedI18NPipesModule
]
})
export class AppModule { }
```
Dont forget that you will still need to import the intl API polyfill if you want to use those deprecated pipes.
2. Date pipe
* Breaking changes:
- the predefined formats (`short`, `shortTime`, `shortDate`, `medium`, ...) now use the patterns given by CLDR (like it was in AngularJS) instead of the ones from the intl API. You might notice some changes, e.g. `shortDate` will be `8/15/17` instead of `8/15/2017` for `en-US`.
- the narrow version of eras is now `GGGGG` instead of `G`, the format `G` is now similar to `GG` and `GGG`.
- the narrow version of months is now `MMMMM` instead of `L`, the format `L` is now the short standalone version of months.
- the narrow version of the week day is now `EEEEE` instead of `E`, the format `E` is now similar to `EE` and `EEE`.
- the timezone `z` will now fallback to `O` and output `GMT+1` instead of the complete zone name (e.g. `Pacific Standard Time`), this is because the quantity of data required to have all the zone names in all of the existing locales is too big.
- the timezone `Z` will now output the ISO8601 basic format, e.g. `+0100`, you should now use `ZZZZ` to get `GMT+01:00`.
| Field type | Format | Example value | v4 | v5 |
|------------|---------------|-----------------------|----|---------------|
| Eras | Narrow | A for AD | G | GGGGG |
| Months | Narrow | S for September | L | MMMMM |
| Week day | Narrow | M for Monday | E | EEEEE |
| Timezone | Long location | Pacific Standard Time | z | Not available |
| Timezone | Long GMT | GMT+01:00 | Z | ZZZZ |
* Features
- new predefined formats `long`, `full`, `longTime`, `fullTime`.
- the format `yyy` is now supported, e.g. the year `52` will be `052` and the year `2017` will be `2017`.
- standalone months are now supported with the formats `L` to `LLLLL`.
- week of the year is now supported with the formats `w` and `ww`, e.g. weeks `5` and `05`.
- week of the month is now supported with the format `W`, e.g. week `3`.
- fractional seconds are now supported with the format `S` to `SSS`.
- day periods for AM/PM now supports additional formats `aa`, `aaa`, `aaaa` and `aaaaa`. The formats `a` to `aaa` are similar, while `aaaa` is the wide version if available (e.g. `ante meridiem` for `am`), or equivalent to `a` otherwise, and `aaaaa` is the narrow version (e.g. `a` for `am`).
- extra day periods are now supported with the formats `b` to `bbbbb` (and `B` to `BBBBB` for the standalone equivalents), e.g. `morning`, `noon`, `afternoon`, ....
- the short non-localized timezones are now available with the format `O` to `OOOO`. The formats `O` to `OOO` will output `GMT+1` while the format `OOOO` will be `GMT+01:00`.
- the ISO8601 basic time zones are now available with the formats `Z` to `ZZZZZ`. The formats `Z` to `ZZZ` will output `+0100`, while the format `ZZZZ` will be `GMT+01:00` and `ZZZZZ` will be `+01:00`.
* Bug fixes
- the date pipe will now work exactly the same across all browsers, which will fix a lot of bugs for safari and IE.
- eras can now be used on their own without the date, e.g. the format `GG` will be `AD` instead of `8 15, 2017 AD`.
3. Currency pipe
* Breaking change:
- the default value for `symbolDisplay` is now `symbol` instead of `code`. This means that by default you will see `$4.99` for `en-US` instead of `USD4.99` previously.
* Deprecation:
- the second parameter of the currency pipe (`symbolDisplay`) is no longer a boolean, it now takes the values `code`, `symbol` or `symbol-narrow`. A boolean value is still valid for now, but it is deprecated and it will print a warning message in the console.
* Features:
- you can now choose between `code`, `symbol` or `symbol-narrow` which gives you access to more options for some currencies (e.g. the canadian dollar with the code `CAD` has the symbol `CA$` and the symbol-narrow `$`).
4. Percent pipe
* Breaking change
- if you don't specify the number of digits to round to, the local format will be used (and it usually rounds numbers to 0 digits, instead of not rounding previously), e.g. `{{ 3.141592 | percent }}` will output `314%` for the locale `en-US` instead of `314.1592%` previously.
Fixes#10809, #9524, #7008, #9324, #7590, #6724, #3429, #17576, #17478, #17319, #17200, #16838, #16624, #16625, #16591, #14131, #12632, #11376, #11187
PR Close#18284
BREAKING CHANGE: `NgFor` has been removed as it was deprecated since v4. Use `NgForOf` instead. This does not impact the use of`*ngFor` in your templates.
PR Close#18758
Prior to this fix if @parent and @child animations ran at the same
time within a disabled region then there was a chance that a @child
sub animation would never complete. This would cause *directives to
never close a removal when a @child trigger was placed on them. This
patch fixes this issue.
PR Close#18715
Prior to fix this fix, @.disabled would only work to disable child
animations. Now it will also disable animations for the element that has
the @.disabled flag (which makes more sense).
PR Close#18714
Windows paths have back slashes, but TypeScript expects to always have forward slashes.
In other places where this call happens (like `src/compiler_host.ts`) the same fix is present.
PR Close#18784
BREAKING CHANGE: `NgTemplateOutlet#ngOutletContext` has been removed as it was deprecated since v4. Use `NgTemplateOutlet#ngTemplateOutletContext` instead.
PR Close#18780
BREAKING CHANGE: `DifferFactory.create` no longer takes ChangeDetectionRef as a first argument as it was not used and deprecated since v4.
PR Close#18757
BREAKING CHANGE: `NgProbeToken` has been removed from `@angular/platform-browser` as it was deprecated since v4. Import it from `@angular/core` instead.
PR Close#18760
After this, neither @angular/compiler nor @angular/comnpiler-cli depend
on @angular/core.
This add a duplication of some interfaces and enums which is stored
in @angular/compiler/src/core.ts
BREAKING CHANGE:
- `@angular/platform-server` now additionally depends on
`@angular/platform-browser-dynamic` as a peer dependency.
PR Close#18683
This change allows users to specify multiple exportAs names for a
directive by giving a comma-delimited list inside the string.
The primary motivation for this change is to allow these names to be
changed in a backwards compatible way.
This commit introduces a new Input property called
`ngFormOptions` to the `NgForm` directive. You can use it
to set default `updateOn` values for all the form's child
controls. This default will be used unless the child has
already explicitly set its own `updateOn` value in
`ngModelOptions`.
Potential values: `change` | `blur` | `submit`
```html
<form [ngFormOptions]="{updateOn: blur}">
<input name="one" ngModel> <!-- will update on blur-->
</form>
```
For more context, see [#18577](https://github.com/angular/angular/pull/18577).
This also allows to customize the filePaths in `.ngsummary.json` file
via the new methods `toSummaryFileName` and `fromSummaryFileName`
on the `CompilerHost`.
Removes the tsickle dependency added when tsickle was added to the
transform compiler.
Added a test to ensure stray dependencies are not added and no
errors are introduced during module flattening.
toString() from DefaultIterableDiffer is only used in tests and should not
be part of the production code. toString() methods from differs add
~ 0.3KB (min+gzip) to the production bundle size.
This commit introduces a new option to template-driven forms that
improves performance by delaying form control updates until the
"blur" or "submit" event. To use it, set the `updateOn` property
in `ngModelOptions`.
```html
<input ngModel [ngModelOptions]="{updateOn: blur}">
```
Like in AngularJS, setting `updateOn` to `blur` or `submit` will
delay the update of the value as well as the validation status.
Updating value and validity together keeps the system easy to reason
about, as the two will always be in sync. It's also worth noting
that the value/validation pipeline does still run when the form is
initialized (in order to support initial values).
Upcoming PRs will address:
* Support for setting group-level `updateOn` in template-driven forms
* Option for skipping initial validation run or more global error
display configuration
* Better support of reactive validation strategies
See more context in #18408, #18514, and the [design doc](https://docs.google.com/document/d/1dlJjRXYeuHRygryK0XoFrZNqW86jH4wobftCFyYa1PA/edit#heading=h.r6gn0i8f19wz).
BREAKING CHANGE
It is no longer possible to declare classes in this format.
```
Component({...}).
Class({
constructor: function() {...}
})
```
This format would only work with JIT and with ES5. This mode doesn’t
allow build tools like Webpack to process and optimize the code, which
results in prohibitively large bundles. We are removing this API
because we are trying to ensure that everyone is on the fast path by
default, and it is not possible to get on the fast path using the ES5
DSL. The replacement is to use TypeScript and `@Decorator` format.
```
@Component({...})
class {
constructor() {...}
}
```
The source map does not currently work with the transformer pipeline.
It will be re-enabled after TypeScript 2.4 is made the min version.
To revert to the former compiler, use the `disableTransformerPipeline` in
tsconfig.json:
```
{
"angularCompilerOptions": {
"disableTransformerPipeline": true
}
}
```
This commit adds support for setting default `updateOn` values
in `FormGroups` and `FormArrays`. If you set `updateOn` to
’blur’` at the group level, all child controls will default to `’blur’`,
unless the child has explicitly specified a different `updateOn` value.
```
const c = new FormGroup({
one: new FormControl()
}, {updateOn: blur});
```
It's worth noting that parent groups will always update their value and
validity immediately upon value/validity updates from children. In other
words, if a group is set to update on blur and its children are individually
set to update on change, the group will still update on change with its
children; its default value will simply not be used.
This change allows ReflectiveInjector to be tree shaken resulting
in not needed Reflect polyfil and smaller bundles.
Code savings for HelloWorld using Closure:
Reflective: bundle.js: 105,864(34,190 gzip)
Static: bundle.js: 154,889(33,555 gzip)
645( 2%)
BREAKING CHANGE:
`platformXXXX()` no longer accepts providers which depend on reflection.
Specifically the method signature when from `Provider[]` to
`StaticProvider[]`.
Example:
Before:
```
[
MyClass,
{provide: ClassA, useClass: SubClassA}
]
```
After:
```
[
{provide: MyClass, deps: [Dep1,...]},
{provide: ClassA, useClass: SubClassA, deps: [Dep1,...]}
]
```
NOTE: This only applies to platform creation and providers for the JIT
compiler. It does not apply to `@Compotent` or `@NgModule` provides
declarations.
Benchpress note: Previously Benchpress also supported reflective
provides, which now require static providers.
DEPRECATION:
- `ReflectiveInjector` is now deprecated as it will be remove. Use
`Injector.create` as a replacement.
closes#18496
Problem description: when using ngTemplateOutlet with context as
an object literal in a template and binding to the context's property
the embedded view would get re-created even if context object remains
essentially the same (the same shape, just update to one properties).
This happens since currently change detection will re-create object
references when an object literal is used and one of its properties
gets updated through a binding.
Solution: this commit changes ngTemplateOutlet logic so we take
context object shape into account before deciding if we should
re-create view or just update existing context.
Fixes#13407
By default, the value and validation status of a `FormControl` updates
whenever its value changes. If an application has heavy validation
requirements, updating on every text change can sometimes be too expensive.
This commit introduces a new option that improves performance by delaying
form control updates until the "blur" event. To use it, set the `updateOn`
option to `blur` when instantiating the `FormControl`.
```ts
// example without validators
const c = new FormControl(, { updateOn: blur });
// example with validators
const c= new FormControl(, {
validators: Validators.required,
updateOn: blur
});
```
Like in AngularJS, setting `updateOn` to `blur` will delay the update of
the value as well as the validation status. Updating value and validity
together keeps the system easy to reason about, as the two will always be
in sync. It's also worth noting that the value/validation pipeline does
still run when the form is initialized (in order to support initial values).
Closes#7113
The static reflectory check for macro function recursion was too
agressive and disallowed calling a function with argument that also
calls the same function. For example, it disallowed nested animation
groups.
Fixes: #17467
FormControls, FormGroups, and FormArrays now optionally accept an options
object as their second argument. Validators and async validators can be
passed in as part of this options object (though they can still be passed
in as the second and third arg as before).
```ts
const c = new FormControl(, {
validators: [Validators.required],
asyncValidators: [myAsyncValidator]
});
```
This commit also adds support for passing arrays of validators and async
validators to FormGroups and FormArrays, which formerly only accepted
individual functions.
```ts
const g = new FormGroup({
one: new FormControl()
}, [myPasswordValidator, myOtherValidator]);
```
This change paves the way for adding more options to AbstractControls,
such as more fine-grained control of validation timing.
Angular can make many assumptions about its event handlers. As a result
the bookkeeping for native addEventListener is significantly cheaper
than Zone's addEventLister which can't make such assumptions.
This change bypasses the Zone's addEventListener if present and always
uses the native addEventHandler. As a result registering event listeners
is about 3 times faster.
PR Close#18107
In previous version of tsickle abstract class methods were materialized.
The change resulted in 6Kb savings in angular.io bundle.
This change also required the removal of `@private` and `@return` type
annotation as it is explicitly dissalowed by tsickle.
NOTE: removed casts in front of `makeDecorator` due to:
https://github.com/angular/devkit/issues/45
```
14938 Jul 19 13:16 0.b19e913fbdd6507d346b.chunk.js
1535 Jul 19 13:16 inline.d8e019ea3cfdd86c2bd0.bundle.js
589178 Jul 19 13:16 main.54c97bcb6f254776b678.bundle.js
34333 Jul 19 13:16 polyfills.4a3c9ca9481d53803157.bundle.js
14938 Jul 18 16:55 0.b19e913fbdd6507d346b.chunk.js
1535 Jul 18 16:55 inline.0c83abb44fad9a2768a7.bundle.js
582786 Jul 18 16:55 main.ea290db71b051813e156.bundle.js
34333 Jul 18 16:55 polyfills.4a3c9ca9481d53803157.bundle.js
main savings: 589178 - 582786 = 6,392
```
PR Close#18236
In Node.JS console.log/error/warn functions actually resuls in a socket
write which in turn is considered by Zone.js as an async task.
This means that if there is any exception during change detection in a platform-server
application the error handler will make the Angular Zone unstable which
in turn will cause change detection to run on next tick and cause an
infinite loop.
It is also better to run the error handler outside of the Angular Zone
in general on all platforms so that an error in the error handler itself doesn't cause an
infinite loop.
Fixes#17073, #7774.
PR Close#18269
Note 4.3 only!
Prior to this fix when [@.disabled] was used in a component that
contained zero animation code it wouldn't register properly because the
renderer associated with that component was not an animation renderer.
This patch ensures that it gets registered even when there are no
animations set.
Note 4.3 only!
Prior to this fix when [@.disabled] was used in a component that
contained zero animation code it wouldn't register properly because the
renderer associated with that component was not an animation renderer.
This patch ensures that it gets registered even when there are no
animations set.
HttpClient is an evolution of the existing Angular HTTP API, which exists
alongside of it in a separate package, @angular/common/http. This structure
ensures that existing codebases can slowly migrate to the new API.
The new API improves significantly on the ergonomics and features of the legacy
API. A partial list of new features includes:
* Typed, synchronous response body access, including support for JSON body types
* JSON is an assumed default and no longer needs to be explicitly parsed
* Interceptors allow middleware logic to be inserted into the pipeline
* Immutable request/response objects
* Progress events for both request upload and response download
* Post-request verification & flush based testing framework
`Object.assign` is not available in all supported browsers and one had to
provide a polyfill. This commit replaces `Object.assign` with the spread
operator (`...`), which TypeScript will transpile to ES5-compatible code.
(#17971)
This commit changes the dynamic version of ngUpgrade to use `UpgradeHelper`,
thus bringing its behavior (wrt upgraded components) much closer to
`upgrade/static`. Fixes/features include:
- Fix template compilation: Now takes place in the correct DOM context, instead
of in a detached node (thus has access to required ancestors etc).
- Fix support for the `$onInit()` lifecycle hook.
- Fix single-slot transclusion (including optional transclusion and fallback
content).
- Add support for multi-slot transclusion (inclusing optional slots and fallback
content).
- Add support for binding required controllers to the directive's controller
(and make the `require` behavior more consistent with AngularJS).
- Add support for pre-/post-linking functions.
(This also ports the fixes from #16627 to the dynamic version.)
Fixes#11044
(#17971)
Although, pre- and post-linking functions are correctly called during directive
linking, directives with `link.post` would throw an error. Interestingly, having
`link.pre` only or defining `link: fn` (which is an alias for `link.post: fn`)
would not throw.
This commit removes this check and allows directives with pre- and/or
post-linking functions to work.
Previously, only simple, single-slot transclusion worked on upgraded components.
This commit fixes/adds support for the following:
- Multi-slot transclusion.
- Using fallback content when no transclusion content is provided.
- Destroy unused scope (when using fallback content).
Fixes#13271
- /deep/ is deprecated and being removed from Chrome
- >>> is semantically invalid in a stylesheet
- sass will no longer support either in any version of sass
-> use ::ng-deep in emulated shadow DOM mode
Because the deep combinator is deprecated in the CSS spec,
`/deep/`, `>>>` and `::ng-deep` are also deprecated in emulated shadow DOM mode
and will be removed in the future.
see https://www.chromestatus.com/features/6750456638341120
Destructuring of the form:
function foo({a, b}: {a?, b?} = {})
breaks strictNullChecks, due to the TypeScript bug https://github.com/microsoft/typescript/issues/10078.
This change eliminates usage of destructuring in function argument lists in cases where it would leak
into the public API .d.ts.
toString() from DefaultKeyValueDiffer is only used in tests and should not
be part of the production code. toString() methods from differs add
~ 0.3KB (min+gzip) to the production bundle size.
With 4.2, we introduced the min and max validator directives. This was actually a breaking change because their selectors could include custom value accessors using the min/max properties for their own purposes.
For now, we are rolling back the change by removing the exports. At the least, we should wait to add them until a major version. In the meantime, we will have further discussion about what the best solution is going forward for all validator directives.
Closes#17491.
----
PR #17551 tried to roll this back, but did not remove the dead code. This failed internal tests that were checking that all declared directives were used.
This PR rolls back the original PR and commit the same as #17551 while also removing the dead code.
With 4.2, we introduced the min and max validator directives. This was actually a breaking change because
their selectors could include custom value accessors using the min/max properties for their own purposes.
For now, we are rolling back the change by removing the exports.
Closes#17491.
This puts the behavior introduced in 573b8611bc behind the new flag
`alwaysCompileGeneratedCode` to not break users that might have relied
on this behavior.
This PR fixes an issue where `query(':enter')` will only collect elements up until it an element that is found that isn't apart of the `:enter` query.
Closes#17440
Previously the RequestOptions/ResponseOptions classes had constructors
with a destructured argument hash (represented by the
{Request,Response}OptionsArgs type). This type consists entirely of
optional members.
This produces a .d.ts file which includes the constructor declaration:
constructor({param, otherParam}?: OptionsArgs);
However, this declaration doesn't type-check properly. TypeScript
determines the actual type of the hash parameter to be OptionsArgs | undefined,
which it then concludes does not have a `param` or `otherParam` member.
This is a bug in TypeScript ( https://github.com/microsoft/typescript/issues/10078 ).
As a workaround, destructuring is moved inside the method, where it does not produce
broken artifacts in the .d.ts.
Fixes#16663.
This wraps the $interval service when using upgrade to run the
$interval() call outside the Angular zone. However, the callback is
invoked within the Angular zone, so changes still propagate to
downgraded components.
Refactoring the compiler to use transformers moves the code generation
after type-checking which suppresses the errors TypeScript would
generate in the user code.
`TypeChecker` currently produces the same factory code that was
generated prior the switch to transfomers, getting back the same
diagnostics as before. The refactoring will allow the code to
diverge from the factory code and allow better diagnostic error
messages than was previously possible by type-checking the factories.
These files are needed so that:
- user code can compile even without real codegen
- as tsc transformers cannot create but only change existing files
in the transformation pipeline.
This is required as e.g. `token` from `@Inject` is
accessed in string form via makeParamDecorator
but as a property in the `ReflectiveInjector`.
Closes#16889 as this is a more general fix.
Add source location as a note tag as `<note category="location">path/to/file.ts:start_line[,end_line]</note>`.
`[,end_line]` part is optional and specified only if the end line is different from the start line.
Fixes #16531
`flush()` can now be used from within fakeAsync tests to simulate moving
time forward until all macrotask events have been cleared from the
event queue.
This fixes a flicker when transitioning from server rendered page to client rendered page in lazy loaded routes by waiting for the lazy loaded route to finish loading, assuming initialNavigation on the route is set to 'enabled'.
Fixes#15716
Hybrid apps (mix of Angular and AngularJS) might return AngularJS implementation
of Promises that do not play well with the change detection. Wrapping them in
native Promises fix this issue.
This could be the case when a Resolver returns a `$q` promise.
Use bracket notation to access $inject in downgradeInjectable to
support property renaming. Since the return type is any,
Closure compiler renames $inject.
* refactor(core): provide error message in stack for reflective DI
Fixes#16355
* fix(compiler): make AOT work with `noUnusedParameters`
Fixes#15532
* refactor: use view engine also for `NgModuleFactory`s
This is a prerequisite for being able to mock providers
in AOTed code later on.
Template expressions can now use a post-fix `!` operator
that asserts the target of the operator is not null. This is
similar to the TypeScript non-null assert operator. Expressions
generated in factories will be generated with the non-null assert
operator.
Closes: #10855
Only one h1 is allowed per document, and this is provided by the template.
So we cannot have any h1 tags (or `#` markdown shorthand) in any API docs.
Closes#16193
* docs(animations): fix links to `Component` animations
* docs(core): fix links to `ReflectiveInjector` methods
The `resolve` and other methods were moved from the
`Injector` to the `ReflectiveInjector`.
* docs(core): fix links to `Renderer`
The local links were assuming that that methods were on the
current document (e.g. `RootRenderer`), but they are actually
on the `Renderer` class.
* docs(router): fix links to methods
* docs(forms): fix links to methods
* docs(core): fix links to methods
* docs(router): fix API page links and an internal link
This code only runs in ES5 mode in the test suite, so this is difficult to test.
However `updateFromTemplate` is being called with a spread operator, as
`...updateFromTemplate(...)`. The spread operator should fail on `null` values.
This change avoids the problem by always returning a (possibly empty) array.
PR Close#16547
This also clarifies via a test
that we only update projected views when the view is created or destroyed,
but not when it is attached/detached/moved.
Fixes#15578
PR Close#16592
Previously a projected view was only dirty checked when the
component in which it was inserted was dirty checked.
This fix changes the behavior so that a view is also dirty checked if
the declaring component is dirty checked.
Note: This does not change the order of change detection,
only the fact whether a projected view is dirty checked or not.
Fixes#14321
@angular/http/testing used to publish a metadata structure which paralleled
the .d.ts structure. This causes ngc to write incorrect imports for this
bundle when compiling providers using MockBackend and other http testing
classes.
This change restructures the @angular/http/testing build a bit, modeling it
after @angular/platform-browser-animations, and produces a FESM structure
that has flat metadata.
Fixes#15521.
Currently, if a Response has an ArrayBuffer body and text() is called, Angular
attempts to convert the ArrayBuffer to a string. Doing this requires knowing
the encoding of the bytes in the buffer, which is context that we don't have.
Instead, we assume that the buffer is encoded in UTF-16, and attempt to process
it that way. Unfortunately the approach chosen (interpret buffer as Uint16Array and
create a Javascript string from each entry using String.fromCharCode) is incorrect
as it does not handle UTF-16 surrogate pairs. What Angular actually implements, then,
is UCS-2 decoding, which is equivalent to UTF-16 with characters restricted to the
base plane.
No standard way of decoding UTF-8 or UTF-16 exists in the browser today. APIs like
TextDecoder are only supported in a few browsers, and although hacks like using the
FileReader API with a Blob to force browsers to do content encoding detection and
decoding exist, they're slow and not compatible with the synchronous text() API.
Thus, this bug is fixed by introducing an encodingHint parameter to text(). The
default value of this parameter is 'legacy', indicating that the existing broken
behavior should be used - this prevents breaking existing apps. The only other
possible value of the hint is 'iso-8859' which interprets each byte of the buffer
with String.fromCharCode. UTF-8 and UTF-16 are not supported - it is up to the
consumer to get the ArrayBuffer and decode it themselves.
The parameter is a hint, as it's not always used (for example, if the conversion
to text doesn't involve an ArrayBuffer source). Additionally, this leaves the door
open for future implementations to perform more sophisticated encoding detection
and ignore the user-provided value if it can be proven to be incorrect.
Fixes#15932.
PR Close#16420
Currently `new Request({search: ...})` is not honored, and
`new Request({params: {'x': 'y'}) doesn't work either, as this object would have
toString() called. This change allows both of these cases to work, as proved by
the 2 new tests.
Fixes#15761
PR Close#16392
Previously, non-bracketed inputs (e.g. `xyz="foo"`) on downgraded components
were initialized using `attrs.$observe()` (which uses `$evalAsync()` under the
hood), while bracketed inputs (e.g. `[xyz]="'foo'"`) were initialized using
`$watch()`. If the downgraded component was created during a `$digest` (e.g. by
an `ng-if` watcher), the non-bracketed inputs were not initialized in time for
the initial call to `ngOnChanges()` and `ngOnInit()`.
This commit fixes it by using `$watch()` to initialize all inputs. `$observe()`
is still used for subsequent updates on non-bracketed inputs, because it is more
performant.
Fixes#16212
- prevents unsubscribing from the zone on error
- prevents unsubscribing from directive `EventEmitter`s on error
- prevents detaching views in dev mode if there on error
- ensures that `ngOnInit` is only called 1x (also in prod mode)
Fixes#9531Fixes#2413Fixes#15925
Reworked some of the code so asserts are no longer necessary.
Added additional and potentially redundant checks
Added checks where the null checker found real problems.
PR Close#16422
Angular uses the `ng-version` attribute to indicate which elements
were used to bootstrap an application. However, after 4.0 we also
added this attribute for all dynamically created components.
Fixes#15880
PR Close#16394
When a directive lives on the same element as a component
(e.g. `<my-comp myDir>`), the directive was not able to get hold
of the `ChangeDetectorRef` of the component on that element. However,
as directives are supposed to decorate components, this is incorrect.
This commit enables this use case.
Closes#12816
This commit adds a new parameter to ngc named `missingTranslation` to set the MissingTranslationStrategy for AoT, it takes the value `error`, `warning` or `ignore`.
Fixes#15808
PR Close#15987
Previously, when using a different property/attribute name for an upgraded
component's binding (e.g. `bindings: {propName: '<attrName'}`), the property and
attribute names were swapped (e.g. using `attrName` as the property name and
`propName` as the attribute name). This resulted in unexpected behavior.
This commit fixes this using the correct names for properties and attributes.
This only affects `upgrade/dynamic`. `upgrade/static` works correctly already.
Fixes#8856
PR Close#16128
closure compiler warns in generated .ngfactory.ts files:
```
WARNING - property createInternal already defined on superclass module$contents$..$core$src$linker$ng_module_factory_NgModuleInjector; use @override to override it
```
PR Close#16137
This only shows up in the language service. Calls to symbols
that are not resolve resulted in null instead of being resolved
causing the language service to see exceptions when the null
was not expected such as in the animations array.
Fixes#15969
- always have a value for `angular`, even if no angular is on the page
- use `const` instead of `function` to allow to export a variable `module`
without breaking tsickle / closure.
Language service was treating some alias TypeScript symbols as if
they where the canonical symbol. If the symbol in scope is an alias
of another symbol the symbol should be converted to the canonical
symbol.
- Ensure that the result passes OASIS XLIFF 2.0 schema validation
- Use <ph/> for self-closing placeholder tags
- Use <pc></pc> for other placeholder tags
- Check for the correct XLIFF file version
- Add ICU support
fixes#11735
This only shows up in the language service. Calls to symbols
that are not resolve resulted in null instead of being resolved
causing the language service to see exceptions when the null
was not expected such as in the animations array.
Fixes#15969
Allows to inherit ctor args, lifecycle hooks and statics from a class
in another compilation unit.
Will error if trying to inherit from a class in another compilation unit
that has an `@Component` / `@Directive` / `@Pipe` / `@NgModule`.
DebugServices is parsing false atributes values incorrectly.
Parse5 expects a string value for attributes, but currently boolean is being sent.
Closes#15494
Fixes#15528
What is the current behavior?
The language service access TypeScript's Symbol.members without checking for null or undefined.
What is the new behavior?
The access is guarded.
Fixes#14417
Updated example to illustrate @ContentChildren default behavior (only query direct children), and how to query for nested elements/all descendants.
This has the side effect of allowing `@Input` and `@ContentChild`
on the same property if the query is static (see the bug description
for details).
Fixes#15417
To generate XLF files with ng-xi18n we could use the format parameter "xlf" or "xlif". The real name is "xliff" not "xlif", so this probably was a typo. This PR adds "xliff" as can be expected
`ngc` would look for flat module resources relative to the flat module index.
`ngc` now looks for flat module resources relative to the `.d.ts` file that declarates
the component.
Fixes#15221
PR Close#15367
This commit fixes a regression where `ngModel` no longer syncs
letter by letter on Android devices, and instead syncs at the
end of every word. This broke when we introduced buffering of
IME events so IMEs like Pinyin keyboards or Katakana keyboards
wouldn't display composition strings. Unfortunately, iOS devices
and Android devices have opposite event behavior. Whereas iOS
devices fire composition events for IME keyboards only, Android
fires composition events for Latin-language keyboards. For
this reason, languages like English don't work as expected on
Android if we always buffer. So to support both platforms,
composition string buffering will only be turned on by default
for non-Android devices.
However, we have also added a `COMPOSITION_BUFFER_MODE` token
to make this configurable by the application. In some cases, apps
might might still want to receive intermediate values. For example,
some inputs begin searching based on Latin letters before a
character selection is made.
As a provider, this is fairly flexible. If you want to turn
composition buffering off, simply provide the token at the top
level:
```ts
providers: [
{provide: COMPOSITION_BUFFER_MODE, useValue: false}
]
```
Or, if you want to change the mode based on locale or platform,
you can use a factory:
```ts
import {shouldUseBuffering} from 'my/lib';
....
providers: [
{provide: COMPOSITION_BUFFER_MODE, useFactory: shouldUseBuffering}
]
```
Closes#15079.
PR Close#15256
Unlike in the browser, on the server there is no concept of a document origin.
Thus, it is illegal to make requests for relative URLs against Http on platform-server.
Currently this fails with a vague error:
Error: Uncaught (in promise): Error at resolvePromise
This change adds explicit validation and a friendlier error message:
Error: URLs requested via Http on the server must be absolute. URL: /testing
Another option considered was to track the concept of an origin for the platform
and automatically prepend it to relative URLs. This would cause automatic "local
RPCs" to be made, though, which would be an unexpected and undesirable default
behavior.
Fixes#15349
PR Close#15357
This change reduces the amount of generated code by only adding `log`
calls for elements and text nodes.
We need the `log` calls to allow users to jump to the right place
in the template via source maps. However, we only need it for element
and text nodes, but not for directives, queries, … as for them we
first locate the corresponding element or text node.
Related to #15239
PR Close#15350
This is needed to support the corner cases:
- usage of a `ComponentFactory` that was created on the fly via `Compiler`
- overwriting of the `NgModuleRef` that is associated to a
`ComponentFactory` by the `ComponentFactoryResolver` from
which it was read.
Fixes#15241
We extracted ids from i18n attributes but forgot to use them when merging the translations, resulting in an error about missing translations even when they were correctly defined.
Fixes#15234
PR Close#15302
If a directive has not bindings nor has a `ngDoCheck` / `ngOnInit`
lifecycle hook, don’t generate a `check` call.
This does not have an impact on the behavior, but produces
less code.
PR Close#15322
This reverts commit 8b5c6b2732.
This feature is not compatible with the `Injector.get` which now only
takes `Type` or `InjectableToken`. `Symbol` is not a valid type.
Closes#15183
PR Close#15319
The Router use the type `Params` for all of:
- position parameters,
- matrix parameters,
- query parameters.
`Params` is defined as follow `type Params = {[key: string]: any}`
Because parameters can either have single or multiple values, the type should
actually be `type Params = {[key: string]: string | string[]}`.
The client code often assumes that parameters have single values, as in the
following exemple:
```
class MyComponent {
sessionId: Observable<string>;
constructor(private route: ActivatedRoute) {}
ngOnInit() {
this.sessionId = this.route
.queryParams
.map(params => params['session_id'] || 'None');
}
}
```
The problem here is that `params['session_id']` could be `string` or `string[]`
but the error is not caught at build time because of the `any` type.
Fixing the type as describe above would break the build because `sessionId`
would becomes an `Observable<string | string[]>`.
However the client code knows if it expects a single or multiple values. By
using the new `ParamMap` interface the user code can decide when it needs a
single value (calling `ParamMap.get(): string`) or multiple values (calling
`ParamMap.getAll(): string[]`).
The above exemple should be rewritten as:
```
class MyComponent {
sessionId: Observable<string>;
constructor(private route: ActivatedRoute) {}
ngOnInit() {
this.sessionId = this.route
.queryParamMap
.map(paramMap => paramMap.get('session_id') || 'None');
}
}
```
Added APIs:
- `interface ParamMap`,
- `ActivatedRoute.paramMap: ParamMap`,
- `ActivatedRoute.queryParamMap: ParamMap`,
- `ActivatedRouteSnapshot.paramMap: ParamMap`,
- `ActivatedRouteSnapshot.queryParamMap: ParamMap`,
- `UrlSegment.parameterMap: ParamMap`
Previously, a pipe that returned a `WrappedValue` would force the change
of the next bound property, independent of the binding in which the pipe
was used.
Now only the binding in which the `WrappedValue` is used will be assumed
as changed.
Fixes#15116
PR Close#15257
This is so that server side rendering does not throw an exception when it encounters animations on the server side and does not need the user to explicitly setup NoopAnimationsModule in their app server module.
Fixes#15098, #14784.
PR Close#15131
Closure compiler is very sensitive to top level function calls.
This commit makes the function calls `createComponentFactory`
and `createRendererTypeV2` logic-less.
Fixes#15181
PR Close#15214
DEPRECATION:
- the arguments `inputs` / `outputs` / `ngContentSelectors` of `downgradeComponent`
are no longer used as Angular calculates these automatically now.
- Compiler.getNgContentSelectors is deprecated. Use
ComponentFactory.ngContentSelectors instead.
E.g. for a component like this:
```
@Component({
template: ‘<ng-content select=“child”></ng-content>’
})
class MyComp {
@Input(‘aInputName’)
aInputProp: string;
@Output(‘aEventName’)
aOuputProp: EventEmitter<any>;
}
```
the `ComponentFactory` will now contain the following:
- `inputs = {aInputProp: ‘aInputName’}`
- `outputs = {aOutputProp: ‘aOutputName’}`
- `ngContentSelectors = [‘child’]`
Fixes:
- In G3, filePaths don’t start with a `/` and therefore became relative.
- Always using the `ng://` prefix groups angular resources in the same
way for AOT and JIT.
ErrorHandler can not throw errors because it will unsubscribe itself from
the error stream.
Zones captures errors and feed it into NgZone, which than has a Rx Observable
to feed it into ErrorHandler. If the ErroHandler throws, then Rx will teardown
the observable which in essence causes the ErrorHandler to be removed from the
error handling. This implies that the ErrorHandler can never throw errors.
Closes#14949Closes#15182Closes#14316
Inlcuded fixes:
- include preamble in generated source map
- always add a mapping for line/col 0 so that the
generated sourcemap is not sparse
- use a uniue sourceUrl for inline templates even
in the AOT case
Observable subscriptions from previous validation runs should be canceled
before a new subscription is created for the next validation run.
Currently the subscription that sets the errors is canceled properly,
but the source observable created by the validator is not. While this
does not affect validation status or error setting, the source
observables will incorrectly continue through the pipeline until they
complete. This change ensures that the whole stream is canceled.
AsyncValidatorFn previously had an "any" return type, but now it more
explicitly requires a Promise or Observable return type. We don't
anticipate this causing problems given that any other return type
would have caused a runtime error already.
Previously, style values were parsed with a regex that split on /:+/.
This causes errors for CSS such as
div {
background-url: url(http://server.com/img.png);
}
since the regex would split the background-url line into 3 values instead of 2.
Now, the : character is detected with indexOf, avoiding this error.
A test was added to verify the behavior is correct.
DEPRECATION:
- the arguments `inputs` / `outputs` / `ngContentSelectors` of `downgradeComponent`
are no longer used as Angular calculates these automatically now.
- Compiler.getNgContentSelectors is deprecated. Use
ComponentFactory.ngContentSelectors instead.
E.g. for a component like this:
```
@Component({
template: ‘<ng-content select=“child”></ng-content>’
})
class MyComp {
@Input(‘aInputName’)
aInputProp: string;
@Output(‘aEventName’)
aOuputProp: EventEmitter<any>;
}
```
the `ComponentFactory` will now contain the following:
- `inputs = {aInputProp: ‘aInputName’}`
- `outputs = {aOutputProp: ‘aOutputName’}`
- `ngContentSelectors = [‘child’]`
* feat(common): support `as` syntax in template/* bindings
Closes#15020
Showing the new and the equivalent old syntax.
- `*ngIf="exp as var1”`
=> `*ngIf="exp; let var1 = ngIf”`
- `*ngFor="var item of itemsStream |async as items”`
=> `*ngFor="var item of itemsStream |async; let items = ngForOf”`
* feat(common): convert ngIf to use `*ngIf="exp as local“` syntax
* feat(common): convert ngForOf to use `*ngFor=“let i of exp as local“` syntax
* feat(common): expose NgForOfContext and NgIfContext
In v2.x, users had to annotate classes that they intended to use as tokens with `@Injectable`. This is no longer required in v4.x for tokens,
and we now require the constructor parameters of classes annotated
with `@Injectable` to be statically analyzable by ngc.
This commit reduces the error into a warning
if the constructor parameters do not meet this condition.
DEPRECATION:
- Classes annotated with `@Injectable` but whose constructor’s parameter types
are not statically analyzable by ngc will produce a warning.
Closes#15003
Throwing on query changes would be a breaking change compared to v2.
Also discovers a bug with querying manually projected content, see #15117.
Related to #14748Closes#14925
Currently, it says:
Unexpected value 'FuzzyTimePipe in
javascript/angular2/example/search/fuzzy_time.ts' declared by the module
'SearchModule in javascript/angular2/example/search/search_module.ts'
The new error message also suggests: 'Please add a @Pipe/@Directive/@Component annotation.'
fixes#12869fixes#12889fixes#13885fixes#13870
Before this change there was a single injector tree.
Now we have 2 injector trees, one for the modules and one for the components.
This fixes lazy loading modules.
See the design docs for details:
https://docs.google.com/document/d/1OEUIwc-s69l1o97K0wBd_-Lth5BBxir1KuCRWklTlI4
BREAKING CHANGES
`ComponentFactory.create()` takes an extra optional `NgModuleRef` parameter.
No change should be required in user code as the correct module will be used
when none is provided
DEPRECATIONS
The following methods were used internally and are no more required:
- `RouterOutlet.locationFactoryResolver`
- `RouterOutlet.locationInjector`
This API was introduced only in a beta release, and is being removed because we found it to be incorrect prior to launch. For more information about why this is being removed, see https://github.com/angular/angular/pull/15050.
BREAKING CHANGE:
Perviously, any provider that had an ngOnDestroy lifecycle hook would be created eagerly.
Now, only classes that are annotated with @Component, @Directive, @Pipe, @NgModule are eager. Providers only become eager if they are either directly or transitively injected into one of the above.
This also makes all `useValue` providers eager, which
should have no observable impact other than code size.
EXPECTED IMPACT:
Making providers eager was an incorrect behavior and never documented.
Also, providers that are used by a directive / pipe / ngModule stay eager.
So the impact should be rather small.
Fixes#14552
The main use case for the generated source maps is to give
errors a meaningful context in terms of the original source
that the user wrote.
Related changes that are included in this commit:
* renamed virtual folders used for jit:
* ng://<module type>/module.ngfactory.js
* ng://<module type>/<comp type>.ngfactory.js
* ng://<module type>/<comp type>.html (for inline templates)
* error logging:
* all errors that happen in templates are logged
from the place of the nearest element.
* instead of logging error messages and stacks separately,
we log the actual error. This is needed so that browsers apply
source maps to the stack correctly.
* error type and error is logged as one log entry.
Note that long-stack-trace zone has a bug that
disables source maps for stack traces,
see https://github.com/angular/zone.js/issues/661.
BREAKING CHANGE:
- DebugNode.source no more returns the source location of a node.
Closes 14013
This can be used to e.g. add the NoopAnimationsModule by default:
```
TestBed.initTestEnvironment([
BrowserDynamicTestingModule,
NoopAnimationsModule
], platformBrowserDynamicTesting());
```